diff options
| author | Daniel Danzberger <daniel@dd-wrt.com> | 2019-11-01 12:27:13 +0100 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2019-11-02 19:25:15 +0100 |
| commit | affe633be4c8122835e255425418ba1680a652e3 (patch) | |
| tree | 2eb14002f5e4fd01fbc2549b0752343cc25f9c1e /.github/pull_request_template | |
| parent | 2d00cf75159938e5e8c9f26e6cdb5a4843213a3e (diff) | |
| download | upstream-affe633be4c8122835e255425418ba1680a652e3.tar.gz upstream-affe633be4c8122835e255425418ba1680a652e3.tar.bz2 upstream-affe633be4c8122835e255425418ba1680a652e3.zip | |
ipq40xx: ipq4019: Add new device Compex WPJ419
This device contains 2 flash devices. One NOR (32M) and one NAND (128M).
U-boot and caldata are on the NOR, the firmware on the NAND.
SoC: IPQ4019
CPU: 4x 710MHz ARMv7
RAM: 256MB
FLASH: NOR:32MB NAND:128MB
ETH: 2x GMAC Gigabit
POE: 802.3 af/at POE, IEEE802.3af/IEEE802.3at(48-56V)
WIFI: 1x 2.4Ghz Atheros qca4019 2x2 MU-MIMO
1x 5.0Ghz Atheros qca4019 2x2 MU-MIMO
USB: 1x 3.0
PCI: 1x Mini PCIe
SIM: 1x Slot
SD: 1x MicroSD slot
BTN: Reset
LED: - Power
- Ethernet
UART: 1x Serial Port 4 Pin Connector (UART)
1x Serial Port 6 Pin Connector (High Speed UART)
POWER: 12V 2A
Installation
------------
Initial flashing can only be done via u-boot using the following commands:
tftpboot openwrt-ipq40xx-generic-compex_wpj419-squashfs-nand-factory.ubi
nand erase.chip; nand write ${fileaddr} 0x0 ${filesize}
res
Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
Diffstat (limited to '.github/pull_request_template')
0 files changed, 0 insertions, 0 deletions