From 884d3962ef4787c8cf0b8a7a673531c623d1dff8 Mon Sep 17 00:00:00 2001
From: Darren Etheridge <detheridge@ti.com>
Date: Fri, 2 Aug 2013 15:35:36 -0500
Subject: [PATCH 334/752] video: da8xx-fb: adding dt support

Enhancing driver to enable probe triggered by a corresponding dt entry.

Add da8xx-fb.txt documentation to devicetree section.

Obtain fb_videomode details for the connected lcd panel using the
display timing details present in DT.

Ensure that platform data is present before checking whether platform
callback is present (the one used to control backlight). So far this
was not an issue as driver was purely non-DT triggered, but now DT
support has been added this check must be performed.

v2: squashing multiple commits from Afzal Mohammed (afzal@ti.com)
v3: remove superfluous cast
v4: expose both ti,am3352-lcdc and ti,da830-lcdc for .compatible
	as driver can use enhanced features of all version of the
	silicon block.
v5: addressed review comments from Prabhakar Lad
v6: Changed the .compatible naming to match the existing drm bindings
	for am33xx devices
v7: clarify which compatible to use in the documentation for DA850

Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
---
 .../devicetree/bindings/video/da8xx-fb.txt         |   42 +++++++++++++
 drivers/video/fbdev/da8xx-fb.c                     |   66 +++++++++++++++++++-
 2 files changed, 105 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/da8xx-fb.txt

--- /dev/null
+++ b/Documentation/devicetree/bindings/video/da8xx-fb.txt
@@ -0,0 +1,42 @@
+TI LCD Controller on DA830/DA850/AM335x SoC's
+
+Required properties:
+- compatible:
+	DA830, DA850 - "ti,da8xx-tilcdc"
+	AM335x SoC's - "ti,am33xx-tilcdc"
+- reg: Address range of lcdc register set
+- interrupts: lcdc interrupt
+- display-timings: typical videomode of lcd panel, represented as child.
+  Refer Documentation/devicetree/bindings/video/display-timing.txt for
+  display timing binding details. If multiple videomodes are mentioned
+  in display timings node, typical videomode has to be mentioned as the
+  native mode or it has to be first child (driver cares only for native
+  videomode).
+
+Recommended properties:
+- ti,hwmods: Name of the hwmod associated to the LCDC
+
+Example for am335x SoC's:
+
+lcdc@4830e000 {
+	compatible = "ti,am33xx-tilcdc";
+	reg =  <0x4830e000 0x1000>;
+	interrupts = <36>;
+	ti,hwmods = "lcdc";
+	status = "okay";
+	display-timings {
+		800x480p62 {
+			clock-frequency = <30000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <39>;
+			hback-porch = <39>;
+			hsync-len = <47>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <2>;
+			hsync-active = <1>;
+			vsync-active = <1>;
+		};
+	};
+};
--- a/drivers/video/fbdev/da8xx-fb.c
+++ b/drivers/video/fbdev/da8xx-fb.c
@@ -36,6 +36,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/lcm.h>
+#include <video/of_display_timing.h>
 #include <video/da8xx-fb.h>
 #include <asm/div64.h>
 
@@ -1317,12 +1318,54 @@ static struct fb_ops da8xx_fb_ops = {
 	.fb_blank = cfb_blank,
 };
 
+static struct lcd_ctrl_config *da8xx_fb_create_cfg(struct platform_device *dev)
+{
+	struct lcd_ctrl_config *cfg;
+
+	cfg = devm_kzalloc(&dev->dev, sizeof(struct fb_videomode), GFP_KERNEL);
+	if (!cfg)
+		return NULL;
+
+	/* default values */
+
+	if (lcd_revision == LCD_VERSION_1)
+		cfg->bpp = 16;
+	else
+		cfg->bpp = 32;
+
+	/*
+	 * For panels so far used with this LCDC, below statement is sufficient.
+	 * For new panels, if required, struct lcd_ctrl_cfg fields to be updated
+	 * with additional/modified values. Those values would have to be then
+	 * obtained from dt(requiring new dt bindings).
+	 */
+
+	cfg->panel_shade = COLOR_ACTIVE;
+
+	return cfg;
+}
+
 static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
 {
 	struct da8xx_lcdc_platform_data *fb_pdata = dev_get_platdata(&dev->dev);
 	struct fb_videomode *lcdc_info;
+	struct device_node *np = dev->dev.of_node;
 	int i;
 
+	if (np) {
+		lcdc_info = devm_kzalloc(&dev->dev,
+					 sizeof(struct fb_videomode),
+					 GFP_KERNEL);
+		if (!lcdc_info)
+			return NULL;
+
+		if (of_get_fb_videomode(np, lcdc_info, OF_USE_NATIVE_MODE)) {
+			dev_err(&dev->dev, "timings not available in DT\n");
+			return NULL;
+		}
+		return lcdc_info;
+	}
+
 	for (i = 0, lcdc_info = known_lcd_panels;
 		i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) {
 		if (strcmp(fb_pdata->type, lcdc_info->name) == 0)
@@ -1351,7 +1394,7 @@ static int fb_probe(struct platform_devi
 	int ret;
 	unsigned long ulcm;
 
-	if (fb_pdata == NULL) {
+	if (fb_pdata == NULL && !device->dev.of_node) {
 		dev_err(&device->dev, "Can not get platform data\n");
 		return -ENOENT;
 	}
@@ -1391,7 +1434,10 @@ static int fb_probe(struct platform_devi
 		break;
 	}
 
-	lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
+	if (device->dev.of_node)
+		lcd_cfg = da8xx_fb_create_cfg(device);
+	else
+		lcd_cfg = fb_pdata->controller_data;
 
 	if (!lcd_cfg) {
 		ret = -EINVAL;
@@ -1410,7 +1456,7 @@ static int fb_probe(struct platform_devi
 	par->dev = &device->dev;
 	par->lcdc_clk = tmp_lcdc_clk;
 	par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
-	if (fb_pdata->panel_power_ctrl) {
+	if (fb_pdata && fb_pdata->panel_power_ctrl) {
 		par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
 		par->panel_power_ctrl(1);
 	}
@@ -1654,12 +1700,26 @@ static int fb_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(fb_pm_ops, fb_suspend, fb_resume);
 
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id da8xx_fb_of_match[] = {
+	/*
+	 * this driver supports version 1 and version 2 of the
+	 * Texas Instruments lcd controller (lcdc) hardware block
+	 */
+	{.compatible = "ti,da8xx-tilcdc", },
+	{.compatible = "ti,am33xx-tilcdc", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, da8xx_fb_of_match);
+#endif
+
 static struct platform_driver da8xx_fb_driver = {
 	.probe = fb_probe,
 	.remove = fb_remove,
 	.driver = {
 		   .name = DRIVER_NAME,
 		   .owner = THIS_MODULE,
+		   .of_match_table = of_match_ptr(da8xx_fb_of_match),
 		   .pm	= &fb_pm_ops,
 		   },
 };