--- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -4,6 +4,14 @@ menu "Intel IXP4xx Implementation Option comment "IXP4xx Platforms" +config MACH_AP42X + bool "Tonze AP-422/425" + select PCI + help + Say 'Y' here if you want your kernel to support Tonze's + AP-422/425 boards. For more information on this platform, + see http://tonze.com.tw + config MACH_NSLU2 bool prompt "Linksys NSLU2" --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -5,6 +5,7 @@ obj-pci-y := obj-pci-n := +obj-pci-$(CONFIG_MACH_AP42X) += ap42x-pci.o obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o obj-pci-$(CONFIG_MACH_CAMBRIA) += cambria-pci.o @@ -32,6 +33,7 @@ obj-pci-$(CONFIG_MACH_USR8200) += usr82 obj-y += common.o +obj-$(CONFIG_MACH_AP42X) += ap42x-setup.o obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o obj-$(CONFIG_MACH_AVILA) += avila-setup.o obj-$(CONFIG_MACH_CAMBRIA) += cambria-setup.o --- /dev/null +++ b/arch/arm/mach-ixp4xx/ap42x-pci.c @@ -0,0 +1,63 @@ +/* + * arch/arch/mach-ixp4xx/ap42x-pci.c + * + * PCI setup routines for Tonze AP-422/425 + * + * Copyright (C) 2012 Imre Kaloz + * + * based on coyote-pci.c: + * Copyright (C) 2002 Jungo Software Technologies. + * Copyright (C) 2003 MontaVista Softwrae, Inc. + * + * Maintainer: Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include + +#include + +void __init ap42x_pci_preinit(void) +{ + irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init ap42x_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) +{ + if (slot == 1) + return IRQ_IXP4XX_GPIO11; + else if (slot == 2) + return IRQ_IXP4XX_GPIO10; + else return -1; +} + +struct hw_pci ap42x_pci __initdata = { + .nr_controllers = 1, + .preinit = ap42x_pci_preinit, + .ops = &ixp4xx_ops, + .setup = ixp4xx_setup, + .map_irq = ap42x_map_irq, +}; + +int __init ap42x_pci_init(void) +{ + if (machine_is_ap42x()) + pci_common_init(&ap42x_pci); + return 0; +} + +subsys_initcall(ap42x_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/ap42x-setup.c @@ -0,0 +1,166 @@ +/* + * arch/arm/mach-ixp4xx/ap42x-setup.c + * + * Board setup for the Tonze AP-42x boards + * + * Copyright (C) 2012 Imre Kaloz + * + * based on coyote-setup.c: + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Imre Kaloz + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct mtd_partition ap42x_flash_partitions[] = { + { + .name = "RedBoot", + .offset = 0x00000000, + .size = 0x00080000, + }, { + .name = "linux", + .offset = 0x00080000, + .size = 0x00100000, + }, { + .name = "rootfs", + .offset = 0x00180000, + .size = 0x00660000, + }, { + .name = "FIS directory", + .offset = 0x007f8000, + .size = 0x00007000, + }, { + .name = "RedBoot config", + .offset = 0x007ff000, + .size = 0x00001000, + }, +}; + +static struct physmap_flash_data ap42x_flash_data = { + .width = 2, + .parts = ap42x_flash_partitions, + .nr_parts = ARRAY_SIZE(ap42x_flash_partitions), +}; + +static struct resource ap42x_flash_resource = { + .flags = IORESOURCE_MEM, + .start = IXP4XX_EXP_BUS_BASE_PHYS, + .end = IXP4XX_EXP_BUS_BASE_PHYS + SZ_8M - 1, +}; + +static struct platform_device ap42x_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ap42x_flash_data, + }, + .num_resources = 1, + .resource = &ap42x_flash_resource, +}; + +static struct resource ap42x_uart_resource = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, +}; + +static struct plat_serial8250_port ap42x_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device ap42x_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = ap42x_uart_data, + }, + .num_resources = 1, + .resource = &ap42x_uart_resource, +}; + +static struct eth_plat_info ap42x_plat_eth[] = { + { + .phy = 2, + .rxq = 3, + .txreadyq = 20, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + } +}; + +static struct platform_device ap42x_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = ap42x_plat_eth, + .dev.coherent_dma_mask = DMA_BIT_MASK(32), + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = ap42x_plat_eth + 1, + .dev.coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +static struct platform_device *ap42x_devices[] __initdata = { + &ap42x_flash, + &ap42x_uart, + &ap42x_eth[0], + &ap42x_eth[1], +}; + +static void __init ap42x_init(void) +{ + ixp4xx_sys_init(); + + ap42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + ap42x_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + platform_add_devices(ap42x_devices, ARRAY_SIZE(ap42x_devices)); +} + +#ifdef CONFIG_MACH_AP42X +MACHINE_START(AP42X, "Tonze AP-422/425") + /* Maintainer: Imre Kaloz */ + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x100, + .init_machine = ap42x_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END +#endif --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h @@ -45,7 +45,8 @@ static __inline__ void __arch_decomp_set machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() || machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() || machine_is_tw5334() || - machine_is_usr8200() || machine_is_tw2662()) + machine_is_usr8200() || machine_is_tw2662() || + machine_is_ap42x()) uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; else uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;