--- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -93,6 +93,14 @@ config MACH_COMPEXWP18 WP18 or NP18A boards. For more information on this platform, see http://www.compex.com.sg/home/OEM/product_ap.htm +config MACH_WRT300NV2 + bool "Linksys WRT300N v2" + select PCI + help + Say 'Y' here if you want your kernel to support Linksys' + WRT300N v2 router. For more information on this + platform, see http://openwrt.org + config ARCH_IXDP425 bool "IXDP425" help --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += v obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o +obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o obj-y += common.o @@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulca obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o +obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h @@ -43,7 +43,8 @@ static __inline__ void __arch_decomp_set if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() || - machine_is_pronghorn() || machine_is_pronghorn_metro()) + machine_is_pronghorn() || machine_is_pronghorn_metro() || + machine_is_wrt300nv2()) uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; else uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; --- /dev/null +++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c @@ -0,0 +1,64 @@ +/* + * arch/arch/mach-ixp4xx/wrt300nv2-pci.c + * + * PCI setup routines for Linksys WRT300N v2 + * + * Copyright (C) 2007 Imre Kaloz + * + * based on coyote-pci.c: + * Copyright (C) 2002 Jungo Software Technologies. + * Copyright (C) 2003 MontaVista Softwrae, Inc. + * + * Maintainer: Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include + +extern void ixp4xx_pci_preinit(void); +extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); +extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); + +void __init wrt300nv2_pci_preinit(void) +{ + irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init wrt300nv2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 1) + return IRQ_IXP4XX_GPIO8; + else return -1; +} + +struct hw_pci wrt300nv2_pci __initdata = { + .nr_controllers = 1, + .preinit = wrt300nv2_pci_preinit, + .ops = &ixp4xx_ops, + .setup = ixp4xx_setup, + .map_irq = wrt300nv2_map_irq, +}; + +int __init wrt300nv2_pci_init(void) +{ + if (machine_is_wrt300nv2()) + pci_common_init(&wrt300nv2_pci); + return 0; +} + +subsys_initcall(wrt300nv2_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c @@ -0,0 +1,110 @@ +/* + * arch/arm/mach-ixp4xx/wrt300nv2-setup.c + * + * Board setup for the Linksys WRT300N v2 + * + * Copyright (C) 2007 Imre Kaloz + * + * based on coyote-setup.c: + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Imre Kaloz + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct flash_platform_data wrt300nv2_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource wrt300nv2_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device wrt300nv2_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &wrt300nv2_flash_data, + }, + .num_resources = 1, + .resource = &wrt300nv2_flash_resource, +}; + +static struct resource wrt300nv2_uart_resource = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, +}; + +static struct plat_serial8250_port wrt300nv2_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device wrt300nv2_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = wrt300nv2_uart_data, + }, + .num_resources = 1, + .resource = &wrt300nv2_uart_resource, +}; + +static struct platform_device *wrt300nv2_devices[] __initdata = { + &wrt300nv2_flash, + &wrt300nv2_uart +}; + +static void __init wrt300nv2_init(void) +{ + ixp4xx_sys_init(); + + wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices)); +} + +#ifdef CONFIG_MACH_WRT300NV2 +MACHINE_START(WRT300NV2, "Linksys WRT300N v2") + /* Maintainer: Imre Kaloz */ + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x0100, + .init_machine = wrt300nv2_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END +#endif