--- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -96,6 +96,19 @@ config AR7 Support for the Texas Instruments AR7 System-on-a-Chip family: TNETD7100, 7200 and 7300. +config ATH25 + bool "Atheros AR231x/AR531x SoC support" + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select IRQ_DOMAIN + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_32BIT_KERNEL + help + Support for Atheros AR231x and Atheros AR531x based boards + config ATH79 bool "Atheros AR71XX/AR724X/AR913X based boards" select ARCH_REQUIRE_GPIOLIB @@ -835,6 +848,7 @@ config MIPS_PARAVIRT endchoice source "arch/mips/alchemy/Kconfig" +source "arch/mips/ath25/Kconfig" source "arch/mips/ath79/Kconfig" source "arch/mips/bcm47xx/Kconfig" source "arch/mips/bcm63xx/Kconfig" --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -2,6 +2,7 @@ platforms += alchemy platforms += ar7 +platforms += ath25 platforms += ath79 platforms += bcm47xx platforms += bcm63xx --- /dev/null +++ b/arch/mips/ath25/Platform @@ -0,0 +1,6 @@ +# +# Atheros AR531X/AR231X WiSoC +# +platform-$(CONFIG_ATH25) += ath25/ +cflags-$(CONFIG_ATH25) += -I$(srctree)/arch/mips/include/asm/mach-ath25 +load-$(CONFIG_ATH25) += 0xffffffff80041000 --- /dev/null +++ b/arch/mips/ath25/Kconfig @@ -0,0 +1,9 @@ +config SOC_AR5312 + bool "Atheros AR5312/AR2312+ SoC support" + depends on ATH25 + default y + +config SOC_AR2315 + bool "Atheros AR2315+ SoC support" + depends on ATH25 + default y --- /dev/null +++ b/arch/mips/ath25/Makefile @@ -0,0 +1,13 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2006 FON Technology, SL. +# Copyright (C) 2006 Imre Kaloz +# Copyright (C) 2006-2009 Felix Fietkau +# + +obj-y += board.o prom.o devices.o +obj-$(CONFIG_SOC_AR5312) += ar5312.o +obj-$(CONFIG_SOC_AR2315) += ar2315.o --- /dev/null +++ b/arch/mips/ath25/board.c @@ -0,0 +1,234 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz + * Copyright (C) 2006-2009 Felix Fietkau + */ + +#include +#include +#include +#include +#include +#include + +#include +#include "devices.h" +#include "ar5312.h" +#include "ar2315.h" + +void (*ath25_irq_dispatch)(void); + +static inline bool check_radio_magic(const void __iomem *addr) +{ + addr += 0x7a; /* offset for flash magic */ + return (__raw_readb(addr) == 0x5a) && (__raw_readb(addr + 1) == 0xa5); +} + +static inline bool check_notempty(const void __iomem *addr) +{ + return __raw_readl(addr) != 0xffffffff; +} + +static inline bool check_board_data(const void __iomem *addr, bool broken) +{ + /* config magic found */ + if (__raw_readl(addr) == ATH25_BD_MAGIC) + return true; + + if (!broken) + return false; + + /* broken board data detected, use radio data to find the + * offset, user will fix this */ + + if (check_radio_magic(addr + 0x1000)) + return true; + if (check_radio_magic(addr + 0xf8)) + return true; + + return false; +} + +static const void __iomem * __init find_board_config(const void __iomem *limit, + const bool broken) +{ + const void __iomem *addr; + const void __iomem *begin = limit - 0x1000; + const void __iomem *end = limit - 0x30000; + + for (addr = begin; addr >= end; addr -= 0x1000) + if (check_board_data(addr, broken)) + return addr; + + return NULL; +} + +static const void __iomem * __init find_radio_config(const void __iomem *limit, + const void __iomem *bcfg) +{ + const void __iomem *rcfg, *begin, *end; + + /* + * Now find the start of Radio Configuration data, using heuristics: + * Search forward from Board Configuration data by 0x1000 bytes + * at a time until we find non-0xffffffff. + */ + begin = bcfg + 0x1000; + end = limit; + for (rcfg = begin; rcfg < end; rcfg += 0x1000) + if (check_notempty(rcfg) && check_radio_magic(rcfg)) + return rcfg; + + /* AR2316 relocates radio config to new location */ + begin = bcfg + 0xf8; + end = limit - 0x1000 + 0xf8; + for (rcfg = begin; rcfg < end; rcfg += 0x1000) + if (check_notempty(rcfg) && check_radio_magic(rcfg)) + return rcfg; + + return NULL; +} + +/* + * NB: Search region size could be larger than the actual flash size, + * but this shouldn't be a problem here, because the flash + * will simply be mapped multiple times. + */ +int __init ath25_find_config(phys_addr_t base, unsigned long size) +{ + const void __iomem *flash_base, *flash_limit; + struct ath25_boarddata *config; + unsigned int rcfg_size; + int broken_boarddata = 0; + const void __iomem *bcfg, *rcfg; + u8 *board_data; + u8 *radio_data; + u8 *mac_addr; + u32 offset; + + flash_base = ioremap_nocache(base, size); + flash_limit = flash_base + size; + + ath25_board.config = NULL; + ath25_board.radio = NULL; + + /* Copy the board and radio data to RAM, because accessing the mapped + * memory of the flash directly after booting is not safe */ + + /* Try to find valid board and radio data */ + bcfg = find_board_config(flash_limit, false); + + /* If that fails, try to at least find valid radio data */ + if (!bcfg) { + bcfg = find_board_config(flash_limit, true); + broken_boarddata = 1; + } + + if (!bcfg) { + pr_warn("WARNING: No board configuration data found!\n"); + goto error; + } + + board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL); + ath25_board.config = (struct ath25_boarddata *)board_data; + memcpy_fromio(board_data, bcfg, 0x100); + if (broken_boarddata) { + pr_warn("WARNING: broken board data detected\n"); + config = ath25_board.config; + if (is_zero_ether_addr(config->enet0_mac)) { + pr_info("Fixing up empty mac addresses\n"); + config->reset_config_gpio = 0xffff; + config->sys_led_gpio = 0xffff; + random_ether_addr(config->wlan0_mac); + config->wlan0_mac[0] &= ~0x06; + random_ether_addr(config->enet0_mac); + random_ether_addr(config->enet1_mac); + } + } + + /* Radio config starts 0x100 bytes after board config, regardless + * of what the physical layout on the flash chip looks like */ + + rcfg = find_radio_config(flash_limit, bcfg); + if (!rcfg) { + pr_warn("WARNING: Could not find Radio Configuration data\n"); + goto error; + } + + radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff); + ath25_board.radio = radio_data; + offset = radio_data - board_data; + pr_info("Radio config found at offset 0x%x (0x%x)\n", rcfg - bcfg, + offset); + rcfg_size = BOARD_CONFIG_BUFSZ - offset; + memcpy_fromio(radio_data, rcfg, rcfg_size); + + mac_addr = &radio_data[0x1d * 2]; + if (is_broadcast_ether_addr(mac_addr)) { + pr_info("Radio MAC is blank; using board-data\n"); + ether_addr_copy(mac_addr, ath25_board.config->wlan0_mac); + } + + iounmap(flash_base); + + return 0; + +error: + iounmap(flash_base); + return -ENODEV; +} + +static void ath25_halt(void) +{ + local_irq_disable(); + unreachable(); +} + +void __init plat_mem_setup(void) +{ + _machine_halt = ath25_halt; + pm_power_off = ath25_halt; + + if (is_ar5312()) + ar5312_plat_mem_setup(); + else + ar2315_plat_mem_setup(); + + /* Disable data watchpoints */ + write_c0_watchlo0(0); +} + +asmlinkage void plat_irq_dispatch(void) +{ + ath25_irq_dispatch(); +} + +void __init plat_time_init(void) +{ + if (is_ar5312()) + ar5312_plat_time_init(); + else + ar2315_plat_time_init(); +} + +unsigned int __cpuinit get_c0_compare_int(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} + +void __init arch_init_irq(void) +{ + clear_c0_status(ST0_IM); + mips_cpu_irq_init(); + + /* Initialize interrupt controllers */ + if (is_ar5312()) + ar5312_arch_init_irq(); + else + ar2315_arch_init_irq(); +} --- /dev/null +++ b/arch/mips/ath25/prom.c @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright MontaVista Software Inc + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz + * Copyright (C) 2006 Felix Fietkau + */ + +/* + * Prom setup file for AR5312/AR231x SoCs + */ + +#include +#include + +void __init prom_init(void) +{ +} + +void __init prom_free_prom_memory(void) +{ +} --- /dev/null +++ b/arch/mips/include/asm/mach-ath25/ath25_platform.h @@ -0,0 +1,73 @@ +#ifndef __ASM_MACH_ATH25_PLATFORM_H +#define __ASM_MACH_ATH25_PLATFORM_H + +#include + +/* + * This is board-specific data that is stored in a "fixed" location in flash. + * It is shared across operating systems, so it should not be changed lightly. + * The main reason we need it is in order to extract the ethernet MAC + * address(es). + */ +struct ath25_boarddata { + u32 magic; /* board data is valid */ +#define ATH25_BD_MAGIC 0x35333131 /* "5311", for all 531x/231x platforms */ + u16 cksum; /* checksum (starting with BD_REV 2) */ + u16 rev; /* revision of this struct */ +#define BD_REV 4 + char board_name[64]; /* Name of board */ + u16 major; /* Board major number */ + u16 minor; /* Board minor number */ + u32 flags; /* Board configuration */ +#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ +#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ +#define BD_UART1 0x00000004 /* UART1 is stuffed */ +#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ +#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ +#define BD_SYSLED 0x00000020 /* System LED stuffed */ +#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ +#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ +#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ +#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ +#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ mem_cap for testing */ +#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ +#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ +#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ +#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ +#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ +#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ +#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ + u16 reset_config_gpio; /* Reset factory GPIO pin */ + u16 sys_led_gpio; /* System LED GPIO pin */ + + u32 cpu_freq; /* CPU core frequency in Hz */ + u32 sys_freq; /* System frequency in Hz */ + u32 cnt_freq; /* Calculated C0_COUNT frequency */ + + u8 wlan0_mac[ETH_ALEN]; + u8 enet0_mac[ETH_ALEN]; + u8 enet1_mac[ETH_ALEN]; + + u16 pci_id; /* Pseudo PCIID for common code */ + u16 mem_cap; /* cap bank1 in MB */ + + /* version 3 */ + u8 wlan1_mac[ETH_ALEN]; /* (ar5212) */ +}; + +#define BOARD_CONFIG_BUFSZ 0x1000 + +/* + * Platform device information for the Wireless MAC + */ +struct ar231x_board_config { + u16 devid; + + /* board config data */ + struct ath25_boarddata *config; + + /* radio calibration data */ + const char *radio; +}; + +#endif /* __ASM_MACH_ATH25_PLATFORM_H */ --- /dev/null +++ b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h @@ -0,0 +1,64 @@ +/* + * Atheros AR231x/AR531x SoC specific CPU feature overrides + * + * Copyright (C) 2008 Gabor Juhos + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H + +/* + * The Atheros AR531x/AR231x SoCs have MIPS 4Kc/4KEc core. + */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_ejtag 1 + +#if !defined(CONFIG_SOC_AR5312) +# define cpu_has_llsc 1 +#else +/* + * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the + * ll/sc instructions. + */ +# define cpu_has_llsc 0 +#endif + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 + +#if !defined(CONFIG_SOC_AR5312) +# define cpu_has_mips32r2 1 +#endif + +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#endif /* __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H */ --- /dev/null +++ b/arch/mips/include/asm/mach-ath25/dma-coherence.h @@ -0,0 +1,82 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + * Copyright (C) 2007 Felix Fietkau + * + */ +#ifndef __ASM_MACH_ATH25_DMA_COHERENCE_H +#define __ASM_MACH_ATH25_DMA_COHERENCE_H + +#include + +/* + * We need some arbitrary non-zero value to be programmed to the BAR1 register + * of PCI host controller to enable DMA. The same value should be used as the + * offset to calculate the physical address of DMA buffer for PCI devices. + */ +#define AR2315_PCI_HOST_SDRAM_BASEADDR 0x20000000 + +static inline dma_addr_t ath25_dev_offset(struct device *dev) +{ +#ifdef CONFIG_PCI + extern struct bus_type pci_bus_type; + + if (dev && dev->bus == &pci_bus_type) + return AR2315_PCI_HOST_SDRAM_BASEADDR; +#endif + return 0; +} + +static inline dma_addr_t +plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + return virt_to_phys(addr) + ath25_dev_offset(dev); +} + +static inline dma_addr_t +plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + return page_to_phys(page) + ath25_dev_offset(dev); +} + +static inline unsigned long +plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr - ath25_dev_offset(dev); +} + +static inline void +plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ +} + +static inline int plat_dma_supported(struct device *dev, u64 mask) +{ + return 1; +} + +static inline void plat_extra_sync_for_device(struct device *dev) +{ +} + +static inline int plat_dma_mapping_error(struct device *dev, + dma_addr_t dma_addr) +{ + return 0; +} + +static inline int plat_device_is_coherent(struct device *dev) +{ +#ifdef CONFIG_DMA_COHERENT + return 1; +#endif +#ifdef CONFIG_DMA_NONCOHERENT + return 0; +#endif +} + +#endif /* __ASM_MACH_ATH25_DMA_COHERENCE_H */ --- /dev/null +++ b/arch/mips/include/asm/mach-ath25/gpio.h @@ -0,0 +1,16 @@ +#ifndef __ASM_MACH_ATH25_GPIO_H +#define __ASM_MACH_ATH25_GPIO_H + +#include + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +static inline int irq_to_gpio(unsigned irq) +{ + return -EINVAL; +} + +#endif /* __ASM_MACH_ATH25_GPIO_H */ --- /dev/null +++ b/arch/mips/include/asm/mach-ath25/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Felix Fietkau + */ +#ifndef __ASM_MACH_ATH25_WAR_H +#define __ASM_MACH_ATH25_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MACH_ATH25_WAR_H */ --- /dev/null +++ b/arch/mips/ath25/ar2315_regs.h @@ -0,0 +1,410 @@ +/* + * Register definitions for AR2315+ + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz + * Copyright (C) 2006-2008 Felix Fietkau + */ + +#ifndef __ASM_MACH_ATH25_AR2315_REGS_H +#define __ASM_MACH_ATH25_AR2315_REGS_H + +/* + * IRQs + */ +#define AR2315_IRQ_MISC (MIPS_CPU_IRQ_BASE + 2) /* C0_CAUSE: 0x0400 */ +#define AR2315_IRQ_WLAN0 (MIPS_CPU_IRQ_BASE + 3) /* C0_CAUSE: 0x0800 */ +#define AR2315_IRQ_ENET0 (MIPS_CPU_IRQ_BASE + 4) /* C0_CAUSE: 0x1000 */ +#define AR2315_IRQ_LCBUS_PCI (MIPS_CPU_IRQ_BASE + 5) /* C0_CAUSE: 0x2000 */ +#define AR2315_IRQ_WLAN0_POLL (MIPS_CPU_IRQ_BASE + 6) /* C0_CAUSE: 0x4000 */ + +/* + * Miscellaneous interrupts, which share IP2. + */ +#define AR2315_MISC_IRQ_UART0 0 +#define AR2315_MISC_IRQ_I2C_RSVD 1 +#define AR2315_MISC_IRQ_SPI 2 +#define AR2315_MISC_IRQ_AHB 3 +#define AR2315_MISC_IRQ_APB 4 +#define AR2315_MISC_IRQ_TIMER 5 +#define AR2315_MISC_IRQ_GPIO 6 +#define AR2315_MISC_IRQ_WATCHDOG 7 +#define AR2315_MISC_IRQ_IR_RSVD 8 +#define AR2315_MISC_IRQ_COUNT 9 + +/* + * Address map + */ +#define AR2315_SPI_READ_BASE 0x08000000 /* SPI flash */ +#define AR2315_SPI_READ_SIZE 0x01000000 +#define AR2315_WLAN0_BASE 0x10000000 /* Wireless MMR */ +#define AR2315_PCI_BASE 0x10100000 /* PCI MMR */ +#define AR2315_PCI_SIZE 0x00001000 +#define AR2315_SDRAMCTL_BASE 0x10300000 /* SDRAM MMR */ +#define AR2315_SDRAMCTL_SIZE 0x00000020 +#define AR2315_LOCAL_BASE 0x10400000 /* Local bus MMR */ +#define AR2315_ENET0_BASE 0x10500000 /* Ethernet MMR */ +#define AR2315_RST_BASE 0x11000000 /* Reset control MMR */ +#define AR2315_RST_SIZE 0x00000100 +#define AR2315_UART0_BASE 0x11100000 /* UART MMR */ +#define AR2315_SPI_MMR_BASE 0x11300000 /* SPI flash MMR */ +#define AR2315_SPI_MMR_SIZE 0x00000010 +#define AR2315_PCI_EXT_BASE 0x80000000 /* PCI external */ +#define AR2315_PCI_EXT_SIZE 0x40000000 + +/* + * Configuration registers + */ + +/* Cold reset register */ +#define AR2315_COLD_RESET 0x0000 + +#define AR2315_RESET_COLD_AHB 0x00000001 +#define AR2315_RESET_COLD_APB 0x00000002 +#define AR2315_RESET_COLD_CPU 0x00000004 +#define AR2315_RESET_COLD_CPUWARM 0x00000008 +#define AR2315_RESET_SYSTEM (RESET_COLD_CPU |\ + RESET_COLD_APB |\ + RESET_COLD_AHB) /* full system */ +#define AR2317_RESET_SYSTEM 0x00000010 + +/* Reset register */ +#define AR2315_RESET 0x0004 + +#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ +#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BB */ +#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ +#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ +#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset mem control */ +#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */ +#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ +#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI iface */ +#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */ +#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR iface */ +#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ +#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 MAC */ + +/* AHB master arbitration control */ +#define AR2315_AHB_ARB_CTL 0x0008 + +#define AR2315_ARB_CPU 0x00000001 /* CPU, default */ +#define AR2315_ARB_WLAN 0x00000002 /* WLAN */ +#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ +#define AR2315_ARB_LOCAL 0x00000008 /* Local bus */ +#define AR2315_ARB_PCI 0x00000010 /* PCI bus */ +#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */ +#define AR2315_ARB_RETRY 0x00000100 /* Retry policy (debug) */ + +/* Config Register */ +#define AR2315_ENDIAN_CTL 0x000c + +#define AR2315_CONFIG_AHB 0x00000001 /* EC-AHB bridge endian */ +#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */ +#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ +#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */ +#define AR2315_CONFIG_MEMCTL 0x00000010 /* Mem controller endian */ +#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ +#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ +#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ +#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */ +#define AR2315_CONFIG_BIG 0x00000400 +#define AR2315_CONFIG_PCIAHB 0x00000800 +#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000 +#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */ +#define AR2315_CONFIG_CPU_DRAM 0x00010000 +#define AR2315_CONFIG_CPU_PCI 0x00020000 +#define AR2315_CONFIG_CPU_MMR 0x00040000 + +/* NMI control */ +#define AR2315_NMI_CTL 0x0010 + +#define AR2315_NMI_EN 1 + +/* Revision Register - Initial value is 0x3010 (WMAC 3.0, AR231X 1.0). */ +#define AR2315_SREV 0x0014 + +#define AR2315_REV_MAJ 0x000000f0 +#define AR2315_REV_MAJ_S 4 +#define AR2315_REV_MIN 0x0000000f +#define AR2315_REV_MIN_S 0 +#define AR2315_REV_CHIP (AR2315_REV_MAJ | AR2315_REV_MIN) + +/* Interface Enable */ +#define AR2315_IF_CTL 0x0018 + +#define AR2315_IF_MASK 0x00000007 +#define AR2315_IF_DISABLED 0 /* Disable all */ +#define AR2315_IF_PCI 1 /* PCI */ +#define AR2315_IF_TS_LOCAL 2 /* Local bus */ +#define AR2315_IF_ALL 3 /* Emulation only */ +#define AR2315_IF_LOCAL_HOST 0x00000008 +#define AR2315_IF_PCI_HOST 0x00000010 +#define AR2315_IF_PCI_INTR 0x00000020 +#define AR2315_IF_PCI_CLK_MASK 0x00030000 +#define AR2315_IF_PCI_CLK_INPUT 0 +#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1 +#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2 +#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3 +#define AR2315_IF_PCI_CLK_SHIFT 16 + +/* APB Interrupt control */ +#define AR2315_ISR 0x0020 +#define AR2315_IMR 0x0024 +#define AR2315_GISR 0x0028 + +#define AR2315_ISR_UART0 0x00000001 /* high speed UART */ +#define AR2315_ISR_I2C_RSVD 0x00000002 /* I2C bus */ +#define AR2315_ISR_SPI 0x00000004 /* SPI bus */ +#define AR2315_ISR_AHB 0x00000008 /* AHB error */ +#define AR2315_ISR_APB 0x00000010 /* APB error */ +#define AR2315_ISR_TIMER 0x00000020 /* Timer */ +#define AR2315_ISR_GPIO 0x00000040 /* GPIO */ +#define AR2315_ISR_WD 0x00000080 /* Watchdog */ +#define AR2315_ISR_IR_RSVD 0x00000100 /* IR */ + +#define AR2315_GISR_MISC 0x00000001 /* Misc */ +#define AR2315_GISR_WLAN0 0x00000002 /* WLAN0 */ +#define AR2315_GISR_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ +#define AR2315_GISR_LOCALPCI 0x00000008 /* Local/PCI bus */ +#define AR2315_GISR_WMACPOLL 0x00000010 +#define AR2315_GISR_TIMER 0x00000020 +#define AR2315_GISR_ETHERNET 0x00000040 /* Ethernet */ + +/* Generic timer */ +#define AR2315_TIMER 0x0030 +#define AR2315_RELOAD 0x0034 + +/* Watchdog timer */ +#define AR2315_WDT_TIMER 0x0038 +#define AR2315_WDT_CTRL 0x003c + +#define AR2315_WDT_CTRL_IGNORE 0x00000000 /* ignore expiration */ +#define AR2315_WDT_CTRL_NMI 0x00000001 /* NMI on watchdog */ +#define AR2315_WDT_CTRL_RESET 0x00000002 /* reset on watchdog */ + +/* CPU Performance Counters */ +#define AR2315_PERFCNT0 0x0048 +#define AR2315_PERFCNT1 0x004c + +#define AR2315_PERF0_DATAHIT 0x00000001 /* Count Data Cache Hits */ +#define AR2315_PERF0_DATAMISS 0x00000002 /* Count Data Cache Misses */ +#define AR2315_PERF0_INSTHIT 0x00000004 /* Count Instruction Cache Hits */ +#define AR2315_PERF0_INSTMISS 0x00000008 /* Count Instruction Cache Misses */ +#define AR2315_PERF0_ACTIVE 0x00000010 /* Count Active Processor Cycles */ +#define AR2315_PERF0_WBHIT 0x00000020 /* Count CPU Write Buffer Hits */ +#define AR2315_PERF0_WBMISS 0x00000040 /* Count CPU Write Buffer Misses */ + +#define AR2315_PERF1_EB_ARDY 0x00000001 /* Count EB_ARdy signal */ +#define AR2315_PERF1_EB_AVALID 0x00000002 /* Count EB_AValid signal */ +#define AR2315_PERF1_EB_WDRDY 0x00000004 /* Count EB_WDRdy signal */ +#define AR2315_PERF1_EB_RDVAL 0x00000008 /* Count EB_RdVal signal */ +#define AR2315_PERF1_VRADDR 0x00000010 /* Count valid read address cycles*/ +#define AR2315_PERF1_VWADDR 0x00000020 /* Count valid write address cycl.*/ +#define AR2315_PERF1_VWDATA 0x00000040 /* Count valid write data cycles */ + +/* AHB Error Reporting */ +#define AR2315_AHB_ERR0 0x0050 /* error */ +#define AR2315_AHB_ERR1 0x0054 /* haddr */ +#define AR2315_AHB_ERR2 0x0058 /* hwdata */ +#define AR2315_AHB_ERR3 0x005c /* hrdata */ +#define AR2315_AHB_ERR4 0x0060 /* status */ + +#define AR2315_AHB_ERROR_DET 1 /* AHB Error has been detected, */ + /* write 1 to clear all bits in ERR0 */ +#define AR2315_AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */ +#define AR2315_AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */ + +#define AR2315_PROCERR_HMAST 0x0000000f +#define AR2315_PROCERR_HMAST_DFLT 0 +#define AR2315_PROCERR_HMAST_WMAC 1 +#define AR2315_PROCERR_HMAST_ENET 2 +#define AR2315_PROCERR_HMAST_PCIENDPT 3 +#define AR2315_PROCERR_HMAST_LOCAL 4 +#define AR2315_PROCERR_HMAST_CPU 5 +#define AR2315_PROCERR_HMAST_PCITGT 6 +#define AR2315_PROCERR_HMAST_S 0 +#define AR2315_PROCERR_HWRITE 0x00000010 +#define AR2315_PROCERR_HSIZE 0x00000060 +#define AR2315_PROCERR_HSIZE_S 5 +#define AR2315_PROCERR_HTRANS 0x00000180 +#define AR2315_PROCERR_HTRANS_S 7 +#define AR2315_PROCERR_HBURST 0x00000e00 +#define AR2315_PROCERR_HBURST_S 9 + +/* Clock Control */ +#define AR2315_PLLC_CTL 0x0064 +#define AR2315_PLLV_CTL 0x0068 +#define AR2315_CPUCLK 0x006c +#define AR2315_AMBACLK 0x0070 +#define AR2315_SYNCCLK 0x0074 +#define AR2315_DSL_SLEEP_CTL 0x0080 +#define AR2315_DSL_SLEEP_DUR 0x0084 + +/* PLLc Control fields */ +#define AR2315_PLLC_REF_DIV_M 0x00000003 +#define AR2315_PLLC_REF_DIV_S 0 +#define AR2315_PLLC_FDBACK_DIV_M 0x0000007c +#define AR2315_PLLC_FDBACK_DIV_S 2 +#define AR2315_PLLC_ADD_FDBACK_DIV_M 0x00000080 +#define AR2315_PLLC_ADD_FDBACK_DIV_S 7 +#define AR2315_PLLC_CLKC_DIV_M 0x0001c000 +#define AR2315_PLLC_CLKC_DIV_S 14 +#define AR2315_PLLC_CLKM_DIV_M 0x00700000 +#define AR2315_PLLC_CLKM_DIV_S 20 + +/* CPU CLK Control fields */ +#define AR2315_CPUCLK_CLK_SEL_M 0x00000003 +#define AR2315_CPUCLK_CLK_SEL_S 0 +#define AR2315_CPUCLK_CLK_DIV_M 0x0000000c +#define AR2315_CPUCLK_CLK_DIV_S 2 + +/* AMBA CLK Control fields */ +#define AR2315_AMBACLK_CLK_SEL_M 0x00000003 +#define AR2315_AMBACLK_CLK_SEL_S 0 +#define AR2315_AMBACLK_CLK_DIV_M 0x0000000c +#define AR2315_AMBACLK_CLK_DIV_S 2 + +/* PCI Clock Control */ +#define AR2315_PCICLK 0x00a4 + +#define AR2315_PCICLK_INPUT_M 0x00000003 +#define AR2315_PCICLK_INPUT_S 0 +#define AR2315_PCICLK_PLLC_CLKM 0 +#define AR2315_PCICLK_PLLC_CLKM1 1 +#define AR2315_PCICLK_PLLC_CLKC 2 +#define AR2315_PCICLK_REF_CLK 3 +#define AR2315_PCICLK_DIV_M 0x0000000c +#define AR2315_PCICLK_DIV_S 2 +#define AR2315_PCICLK_IN_FREQ 0 +#define AR2315_PCICLK_IN_FREQ_DIV_6 1 +#define AR2315_PCICLK_IN_FREQ_DIV_8 2 +#define AR2315_PCICLK_IN_FREQ_DIV_10 3 + +/* Observation Control Register */ +#define AR2315_OCR 0x00b0 + +#define AR2315_OCR_GPIO0_IRIN 0x00000040 +#define AR2315_OCR_GPIO1_IROUT 0x00000080 +#define AR2315_OCR_GPIO3_RXCLR 0x00000200 + +/* General Clock Control */ +#define AR2315_MISCCLK 0x00b4 + +#define AR2315_MISCCLK_PLLBYPASS_EN 0x00000001 +#define AR2315_MISCCLK_PROCREFCLK 0x00000002 + +/* + * SDRAM Controller + * - No read or write buffers are included. + */ +#define AR2315_MEM_CFG 0x0000 +#define AR2315_MEM_CTRL 0x000c +#define AR2315_MEM_REF 0x0010 + +#define AR2315_MEM_CFG_DATA_WIDTH_M 0x00006000 +#define AR2315_MEM_CFG_DATA_WIDTH_S 13 +#define AR2315_MEM_CFG_COL_WIDTH_M 0x00001e00 +#define AR2315_MEM_CFG_COL_WIDTH_S 9 +#define AR2315_MEM_CFG_ROW_WIDTH_M 0x000001e0 +#define AR2315_MEM_CFG_ROW_WIDTH_S 5 +#define AR2315_MEM_CFG_BANKADDR_BITS_M 0x00000018 +#define AR2315_MEM_CFG_BANKADDR_BITS_S 3 + +/* + * Local Bus Interface Registers + */ +#define AR2315_LB_CONFIG 0x0000 + +#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */ +#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ +#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ +#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ +#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ +#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ +#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ +#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ +#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ +#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ +#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ +#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ +#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ +#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ +#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ +#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ +#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ +#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */ +#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ +#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ +#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ +#define AR2315_LBCONF_INT_CTR3 0x000c0000 /* GND drive, Vdd drive */ +#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ +#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ +#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ + +#define AR2315_LB_CLKSEL 0x0004 + +#define AR2315_LBCLK_EXT 0x00000001 /* use external clk for lb */ + +#define AR2315_LB_1MS 0x0008 + +#define AR2315_LB1MS_MASK 0x0003ffff /* # of AHB clk cycles in 1ms */ + +#define AR2315_LB_MISCCFG 0x000c + +#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ +#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ +#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ +#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ +#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ +#define AR2315_LBM_TIMEOUT_M 0x00ffff80 +#define AR2315_LBM_TIMEOUT_S 7 +#define AR2315_LBM_PORTMUX 0x07000000 + +#define AR2315_LB_RXTSOFF 0x0010 + +#define AR2315_LB_TX_CHAIN_EN 0x0100 + +#define AR2315_LB_TXEN_0 0x00000001 +#define AR2315_LB_TXEN_1 0x00000002 +#define AR2315_LB_TXEN_2 0x00000004 +#define AR2315_LB_TXEN_3 0x00000008 + +#define AR2315_LB_TX_CHAIN_DIS 0x0104 +#define AR2315_LB_TX_DESC_PTR 0x0200 + +#define AR2315_LB_RX_CHAIN_EN 0x0400 + +#define AR2315_LB_RXEN 0x00000001 + +#define AR2315_LB_RX_CHAIN_DIS 0x0404 +#define AR2315_LB_RX_DESC_PTR 0x0408 + +#define AR2315_LB_INT_STATUS 0x0500 + +#define AR2315_LB_INT_TX_DESC 0x00000001 +#define AR2315_LB_INT_TX_OK 0x00000002 +#define AR2315_LB_INT_TX_ERR 0x00000004 +#define AR2315_LB_INT_TX_EOF 0x00000008 +#define AR2315_LB_INT_RX_DESC 0x00000010 +#define AR2315_LB_INT_RX_OK 0x00000020 +#define AR2315_LB_INT_RX_ERR 0x00000040 +#define AR2315_LB_INT_RX_EOF 0x00000080 +#define AR2315_LB_INT_TX_TRUNC 0x00000100 +#define AR2315_LB_INT_TX_STARVE 0x00000200 +#define AR2315_LB_INT_LB_TIMEOUT 0x00000400 +#define AR2315_LB_INT_LB_ERR 0x00000800 +#define AR2315_LB_INT_MBOX_WR 0x00001000 +#define AR2315_LB_INT_MBOX_RD 0x00002000 + +/* Bit definitions for INT MASK are the same as INT_STATUS */ +#define AR2315_LB_INT_MASK 0x0504 + +#define AR2315_LB_INT_EN 0x0508 +#define AR2315_LB_MBOX 0x0600 + +#endif /* __ASM_MACH_ATH25_AR2315_REGS_H */ --- /dev/null +++ b/arch/mips/ath25/ar5312_regs.h @@ -0,0 +1,224 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 Imre Kaloz + * Copyright (C) 2006 Felix Fietkau + */ + +#ifndef __ASM_MACH_ATH25_AR5312_REGS_H +#define __ASM_MACH_ATH25_AR5312_REGS_H + +/* + * IRQs + */ +#define AR5312_IRQ_WLAN0 (MIPS_CPU_IRQ_BASE + 2) /* C0_CAUSE: 0x0400 */ +#define AR5312_IRQ_ENET0 (MIPS_CPU_IRQ_BASE + 3) /* C0_CAUSE: 0x0800 */ +#define AR5312_IRQ_ENET1 (MIPS_CPU_IRQ_BASE + 4) /* C0_CAUSE: 0x1000 */ +#define AR5312_IRQ_WLAN1 (MIPS_CPU_IRQ_BASE + 5) /* C0_CAUSE: 0x2000 */ +#define AR5312_IRQ_MISC (MIPS_CPU_IRQ_BASE + 6) /* C0_CAUSE: 0x4000 */ + +/* + * Miscellaneous interrupts, which share IP6. + */ +#define AR5312_MISC_IRQ_TIMER 0 +#define AR5312_MISC_IRQ_AHB_PROC 1 +#define AR5312_MISC_IRQ_AHB_DMA 2 +#define AR5312_MISC_IRQ_GPIO 3 +#define AR5312_MISC_IRQ_UART0 4 +#define AR5312_MISC_IRQ_UART0_DMA 5 +#define AR5312_MISC_IRQ_WATCHDOG 6 +#define AR5312_MISC_IRQ_LOCAL 7 +#define AR5312_MISC_IRQ_SPI 8 +#define AR5312_MISC_IRQ_COUNT 9 + +/* + * Address Map + * + * The AR5312 supports 2 enet MACS, even though many reference boards only + * actually use 1 of them (i.e. Only MAC 0 is actually connected to an enet + * PHY or PHY switch. The AR2312 supports 1 enet MAC. + */ +#define AR5312_WLAN0_BASE 0x18000000 +#define AR5312_ENET0_BASE 0x18100000 +#define AR5312_ENET1_BASE 0x18200000 +#define AR5312_SDRAMCTL_BASE 0x18300000 +#define AR5312_SDRAMCTL_SIZE 0x00000010 +#define AR5312_FLASHCTL_BASE 0x18400000 +#define AR5312_FLASHCTL_SIZE 0x00000010 +#define AR5312_WLAN1_BASE 0x18500000 +#define AR5312_UART0_BASE 0x1c000000 /* UART MMR */ +#define AR5312_GPIO_BASE 0x1c002000 +#define AR5312_GPIO_SIZE 0x00000010 +#define AR5312_RST_BASE 0x1c003000 +#define AR5312_RST_SIZE 0x00000100 +#define AR5312_FLASH_BASE 0x1e000000 +#define AR5312_FLASH_SIZE 0x00800000 + +/* + * Need these defines to determine true number of ethernet MACs + */ +#define AR5312_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ + +/* Reset/Timer Block Address Map */ +#define AR5312_TIMER 0x0000 /* countdown timer */ +#define AR5312_RELOAD 0x0004 /* timer reload value */ +#define AR5312_WDT_CTRL 0x0008 /* watchdog cntrl */ +#define AR5312_WDT_TIMER 0x000c /* watchdog timer */ +#define AR5312_ISR 0x0010 /* Intr Status Reg */ +#define AR5312_IMR 0x0014 /* Intr Mask Reg */ +#define AR5312_RESET 0x0020 +#define AR5312_CLOCKCTL1 0x0064 +#define AR5312_SCRATCH 0x006c +#define AR5312_PROCADDR 0x0070 +#define AR5312_PROC1 0x0074 +#define AR5312_DMAADDR 0x0078 +#define AR5312_DMA1 0x007c +#define AR5312_ENABLE 0x0080 /* interface enb */ +#define AR5312_REV 0x0090 /* revision */ + +/* AR5312_WDT_CTRL register bit field definitions */ +#define AR5312_WDT_CTRL_IGNORE 0x00000000 /* ignore expiration */ +#define AR5312_WDT_CTRL_NMI 0x00000001 +#define AR5312_WDT_CTRL_RESET 0x00000002 + +/* AR5312_ISR register bit field definitions */ +#define AR5312_ISR_TIMER 0x00000001 +#define AR5312_ISR_AHBPROC 0x00000002 +#define AR5312_ISR_AHBDMA 0x00000004 +#define AR5312_ISR_GPIO 0x00000008 +#define AR5312_ISR_UART0 0x00000010 +#define AR5312_ISR_UART0DMA 0x00000020 +#define AR5312_ISR_WD 0x00000040 +#define AR5312_ISR_LOCAL 0x00000080 + +/* AR5312_RESET register bit field definitions */ +#define AR5312_RESET_SYSTEM 0x00000001 /* cold reset full system */ +#define AR5312_RESET_PROC 0x00000002 /* cold reset MIPS core */ +#define AR5312_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC/BB */ +#define AR5312_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ +#define AR5312_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ +#define AR5312_RESET_ENET0 0x00000020 /* cold reset ENET0 MAC */ +#define AR5312_RESET_ENET1 0x00000040 /* cold reset ENET1 MAC */ +#define AR5312_RESET_UART0 0x00000100 /* cold reset UART0 */ +#define AR5312_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ +#define AR5312_RESET_APB 0x00000400 /* cold reset APB ar5312 */ +#define AR5312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ +#define AR5312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ +#define AR5312_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BB */ +#define AR5312_RESET_NMI 0x00010000 /* send an NMI to the CPU */ +#define AR5312_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 MAC */ +#define AR5312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 BB */ +#define AR5312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ +#define AR5312_RESET_WDOG 0x00100000 /* last reset was a wdt */ + +#define AR5312_RESET_WMAC0_BITS (AR5312_RESET_WLAN0 |\ + AR5312_RESET_WARM_WLAN0_MAC |\ + AR5312_RESET_WARM_WLAN0_BB) + +#define AR5312_RESET_WMAC1_BITS (AR5312_RESET_WLAN1 |\ + AR5312_RESET_WARM_WLAN1_MAC |\ + AR5312_RESET_WARM_WLAN1_BB) + +/* AR5312_CLOCKCTL1 register bit field definitions */ +#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 +#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 +#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 +#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 +#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 + +/* Valid for AR5312 and AR2312 */ +#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 +#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 +#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 +#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 +#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 + +/* Valid for AR2313 */ +#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 +#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 +#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 +#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 +#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 + +/* AR5312_ENABLE register bit field definitions */ +#define AR5312_ENABLE_WLAN0 0x00000001 +#define AR5312_ENABLE_ENET0 0x00000002 +#define AR5312_ENABLE_ENET1 0x00000004 +#define AR5312_ENABLE_UART_AND_WLAN1_PIO 0x00000008/* UART & WLAN1 PIO */ +#define AR5312_ENABLE_WLAN1_DMA 0x00000010/* WLAN1 DMAs */ +#define AR5312_ENABLE_WLAN1 (AR5312_ENABLE_UART_AND_WLAN1_PIO |\ + AR5312_ENABLE_WLAN1_DMA) + +/* AR5312_REV register bit field definitions */ +#define AR5312_REV_WMAC_MAJ 0x0000f000 +#define AR5312_REV_WMAC_MAJ_S 12 +#define AR5312_REV_WMAC_MIN 0x00000f00 +#define AR5312_REV_WMAC_MIN_S 8 +#define AR5312_REV_MAJ 0x000000f0 +#define AR5312_REV_MAJ_S 4 +#define AR5312_REV_MIN 0x0000000f +#define AR5312_REV_MIN_S 0 +#define AR5312_REV_CHIP (AR5312_REV_MAJ|AR5312_REV_MIN) + +/* Major revision numbers, bits 7..4 of Revision ID register */ +#define AR5312_REV_MAJ_AR5312 0x4 +#define AR5312_REV_MAJ_AR2313 0x5 + +/* Minor revision numbers, bits 3..0 of Revision ID register */ +#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ +#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ + +/* + * ARM Flash Controller -- 3 flash banks with either x8 or x16 devices + */ +#define AR5312_FLASHCTL0 0x0000 +#define AR5312_FLASHCTL1 0x0004 +#define AR5312_FLASHCTL2 0x0008 + +/* AR5312_FLASHCTL register bit field definitions */ +#define AR5312_FLASHCTL_IDCY 0x0000000f /* Idle cycle turnaround time */ +#define AR5312_FLASHCTL_IDCY_S 0 +#define AR5312_FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ +#define AR5312_FLASHCTL_WST1_S 5 +#define AR5312_FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ +#define AR5312_FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ +#define AR5312_FLASHCTL_WST2_S 11 +#define AR5312_FLASHCTL_AC 0x00070000 /* Flash addr check (added) */ +#define AR5312_FLASHCTL_AC_S 16 +#define AR5312_FLASHCTL_AC_128K 0x00000000 +#define AR5312_FLASHCTL_AC_256K 0x00010000 +#define AR5312_FLASHCTL_AC_512K 0x00020000 +#define AR5312_FLASHCTL_AC_1M 0x00030000 +#define AR5312_FLASHCTL_AC_2M 0x00040000 +#define AR5312_FLASHCTL_AC_4M 0x00050000 +#define AR5312_FLASHCTL_AC_8M 0x00060000 +#define AR5312_FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ +#define AR5312_FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ +#define AR5312_FLASHCTL_BUSERR 0x01000000 /* Bus transfer error flag */ +#define AR5312_FLASHCTL_WPERR 0x02000000 /* Write protect error flag */ +#define AR5312_FLASHCTL_WP 0x04000000 /* Write protect */ +#define AR5312_FLASHCTL_BM 0x08000000 /* Burst mode */ +#define AR5312_FLASHCTL_MW 0x30000000 /* Mem width */ +#define AR5312_FLASHCTL_MW8 0x00000000 /* Mem width x8 */ +#define AR5312_FLASHCTL_MW16 0x10000000 /* Mem width x16 */ +#define AR5312_FLASHCTL_MW32 0x20000000 /* Mem width x32 (not supp) */ +#define AR5312_FLASHCTL_ATNR 0x00000000 /* Access == no retry */ +#define AR5312_FLASHCTL_ATR 0x80000000 /* Access == retry every */ +#define AR5312_FLASHCTL_ATR4 0xc0000000 /* Access == retry every 4 */ + +/* + * ARM SDRAM Controller -- just enough to determine memory size + */ +#define AR5312_MEM_CFG1 0x0004 + +#define AR5312_MEM_CFG1_AC0_M 0x00000700 /* bank 0: SDRAM addr check */ +#define AR5312_MEM_CFG1_AC0_S 8 +#define AR5312_MEM_CFG1_AC1_M 0x00007000 /* bank 1: SDRAM addr check */ +#define AR5312_MEM_CFG1_AC1_S 12 + +#endif /* __ASM_MACH_ATH25_AR5312_REGS_H */ --- /dev/null +++ b/arch/mips/ath25/ar5312.c @@ -0,0 +1,393 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz + * Copyright (C) 2006-2009 Felix Fietkau + * Copyright (C) 2012 Alexandros C. Couloumbis + */ + +/* + * Platform devices for Atheros AR5312 SoCs + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "devices.h" +#include "ar5312.h" +#include "ar5312_regs.h" + +static void __iomem *ar5312_rst_base; +static struct irq_domain *ar5312_misc_irq_domain; + +static inline u32 ar5312_rst_reg_read(u32 reg) +{ + return __raw_readl(ar5312_rst_base + reg); +} + +static inline void ar5312_rst_reg_write(u32 reg, u32 val) +{ + __raw_writel(val, ar5312_rst_base + reg); +} + +static inline void ar5312_rst_reg_mask(u32 reg, u32 mask, u32 val) +{ + u32 ret = ar5312_rst_reg_read(reg); + + ret &= ~mask; + ret |= val; + ar5312_rst_reg_write(reg, ret); +} + +static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id) +{ + u32 proc1 = ar5312_rst_reg_read(AR5312_PROC1); + u32 proc_addr = ar5312_rst_reg_read(AR5312_PROCADDR); /* clears error */ + u32 dma1 = ar5312_rst_reg_read(AR5312_DMA1); + u32 dma_addr = ar5312_rst_reg_read(AR5312_DMAADDR); /* clears error */ + + pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", + proc_addr, proc1, dma_addr, dma1); + + machine_restart("AHB error"); /* Catastrophic failure */ + return IRQ_HANDLED; +} + +static struct irqaction ar5312_ahb_err_interrupt = { + .handler = ar5312_ahb_err_handler, + .name = "ar5312-ahb-error", +}; + +static void ar5312_misc_irq_handler(unsigned irq, struct irq_desc *desc) +{ + u32 pending = ar5312_rst_reg_read(AR5312_ISR) & + ar5312_rst_reg_read(AR5312_IMR); + unsigned nr, misc_irq = 0; + + if (pending) { + struct irq_domain *domain = irq_get_handler_data(irq); + + nr = __ffs(pending); + misc_irq = irq_find_mapping(domain, nr); + } + + if (misc_irq) { + generic_handle_irq(misc_irq); + if (nr == AR5312_MISC_IRQ_TIMER) + ar5312_rst_reg_read(AR5312_TIMER); + } else { + spurious_interrupt(); + } +} + +/* Enable the specified AR5312_MISC_IRQ interrupt */ +static void ar5312_misc_irq_unmask(struct irq_data *d) +{ + ar5312_rst_reg_mask(AR5312_IMR, 0, BIT(d->hwirq)); +} + +/* Disable the specified AR5312_MISC_IRQ interrupt */ +static void ar5312_misc_irq_mask(struct irq_data *d) +{ + ar5312_rst_reg_mask(AR5312_IMR, BIT(d->hwirq), 0); + ar5312_rst_reg_read(AR5312_IMR); /* flush write buffer */ +} + +static struct irq_chip ar5312_misc_irq_chip = { + .name = "ar5312-misc", + .irq_unmask = ar5312_misc_irq_unmask, + .irq_mask = ar5312_misc_irq_mask, +}; + +static int ar5312_misc_irq_map(struct irq_domain *d, unsigned irq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(irq, &ar5312_misc_irq_chip, handle_level_irq); + return 0; +} + +static struct irq_domain_ops ar5312_misc_irq_domain_ops = { + .map = ar5312_misc_irq_map, +}; + +static void ar5312_irq_dispatch(void) +{ + u32 pending = read_c0_status() & read_c0_cause(); + + if (pending & CAUSEF_IP2) + do_IRQ(AR5312_IRQ_WLAN0); + else if (pending & CAUSEF_IP5) + do_IRQ(AR5312_IRQ_WLAN1); + else if (pending & CAUSEF_IP6) + do_IRQ(AR5312_IRQ_MISC); + else if (pending & CAUSEF_IP7) + do_IRQ(ATH25_IRQ_CPU_CLOCK); + else + spurious_interrupt(); +} + +void __init ar5312_arch_init_irq(void) +{ + struct irq_domain *domain; + unsigned irq; + + ath25_irq_dispatch = ar5312_irq_dispatch; + + domain = irq_domain_add_linear(NULL, AR5312_MISC_IRQ_COUNT, + &ar5312_misc_irq_domain_ops, NULL); + if (!domain) + panic("Failed to add IRQ domain"); + + irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC); + setup_irq(irq, &ar5312_ahb_err_interrupt); + + irq_set_chained_handler(AR5312_IRQ_MISC, ar5312_misc_irq_handler); + irq_set_handler_data(AR5312_IRQ_MISC, domain); + + ar5312_misc_irq_domain = domain; +} + +static struct physmap_flash_data ar5312_flash_data = { + .width = 2, +}; + +static struct resource ar5312_flash_resource = { + .start = AR5312_FLASH_BASE, + .end = AR5312_FLASH_BASE + AR5312_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ar5312_physmap_flash = { + .name = "physmap-flash", + .id = 0, + .dev.platform_data = &ar5312_flash_data, + .resource = &ar5312_flash_resource, + .num_resources = 1, +}; + +static void __init ar5312_flash_init(void) +{ + void __iomem *flashctl_base; + u32 ctl; + + flashctl_base = ioremap_nocache(AR5312_FLASHCTL_BASE, + AR5312_FLASHCTL_SIZE); + + ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL0); + ctl &= AR5312_FLASHCTL_MW; + + /* fixup flash width */ + switch (ctl) { + case AR5312_FLASHCTL_MW16: + ar5312_flash_data.width = 2; + break; + case AR5312_FLASHCTL_MW8: + default: + ar5312_flash_data.width = 1; + break; + } + + /* + * Configure flash bank 0. + * Assume 8M window size. Flash will be aliased if it's smaller + */ + ctl |= AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC_8M | AR5312_FLASHCTL_RBLE; + ctl |= 0x01 << AR5312_FLASHCTL_IDCY_S; + ctl |= 0x07 << AR5312_FLASHCTL_WST1_S; + ctl |= 0x07 << AR5312_FLASHCTL_WST2_S; + __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL0); + + /* Disable other flash banks */ + ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL1); + ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC); + __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL1); + ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL2); + ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC); + __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL2); + + iounmap(flashctl_base); +} + +void __init ar5312_init_devices(void) +{ + struct ath25_boarddata *config; + + ar5312_flash_init(); + + /* Locate board/radio config data */ + ath25_find_config(AR5312_FLASH_BASE, AR5312_FLASH_SIZE); + config = ath25_board.config; + + /* AR2313 has CPU minor rev. 10 */ + if ((current_cpu_data.processor_id & 0xff) == 0x0a) + ath25_soc = ATH25_SOC_AR2313; + + /* AR2312 shares the same Silicon ID as AR5312 */ + else if (config->flags & BD_ISCASPER) + ath25_soc = ATH25_SOC_AR2312; + + /* Everything else is probably AR5312 or compatible */ + else + ath25_soc = ATH25_SOC_AR5312; + + platform_device_register(&ar5312_physmap_flash); + + switch (ath25_soc) { + case ATH25_SOC_AR5312: + if (!ath25_board.radio) + return; + + if (!(config->flags & BD_WLAN0)) + break; + + ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0); + break; + case ATH25_SOC_AR2312: + case ATH25_SOC_AR2313: + if (!ath25_board.radio) + return; + break; + default: + break; + } + + if (config->flags & BD_WLAN1) + ath25_add_wmac(1, AR5312_WLAN1_BASE, AR5312_IRQ_WLAN1); +} + +static void ar5312_restart(char *command) +{ + /* reset the system */ + local_irq_disable(); + while (1) + ar5312_rst_reg_write(AR5312_RESET, AR5312_RESET_SYSTEM); +} + +/* + * This table is indexed by bits 5..4 of the CLOCKCTL1 register + * to determine the predevisor value. + */ +static unsigned clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 }; + +static unsigned __init ar5312_cpu_frequency(void) +{ + u32 scratch, devid, clock_ctl1; + u32 predivide_mask, multiplier_mask, doubler_mask; + unsigned predivide_shift, multiplier_shift; + unsigned predivide_select, predivisor, multiplier; + + /* Trust the bootrom's idea of cpu frequency. */ + scratch = ar5312_rst_reg_read(AR5312_SCRATCH); + if (scratch) + return scratch; + + devid = ar5312_rst_reg_read(AR5312_REV); + devid = (devid & AR5312_REV_MAJ) >> AR5312_REV_MAJ_S; + if (devid == AR5312_REV_MAJ_AR2313) { + predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK; + predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; + multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK; + multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; + doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK; + } else { /* AR5312 and AR2312 */ + predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; + predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; + multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; + multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; + doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; + } + + /* + * Clocking is derived from a fixed 40MHz input clock. + * + * cpu_freq = input_clock * MULT (where MULT is PLL multiplier) + * sys_freq = cpu_freq / 4 (used for APB clock, serial, + * flash, Timer, Watchdog Timer) + * + * cnt_freq = cpu_freq / 2 (use for CPU count/compare) + * + * So, for example, with a PLL multiplier of 5, we have + * + * cpu_freq = 200MHz + * sys_freq = 50MHz + * cnt_freq = 100MHz + * + * We compute the CPU frequency, based on PLL settings. + */ + + clock_ctl1 = ar5312_rst_reg_read(AR5312_CLOCKCTL1); + predivide_select = (clock_ctl1 & predivide_mask) >> predivide_shift; + predivisor = clockctl1_predivide_table[predivide_select]; + multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift; + + if (clock_ctl1 & doubler_mask) + multiplier <<= 1; + + return (40000000 / predivisor) * multiplier; +} + +static inline unsigned ar5312_sys_frequency(void) +{ + return ar5312_cpu_frequency() / 4; +} + +void __init ar5312_plat_time_init(void) +{ + mips_hpt_frequency = ar5312_cpu_frequency() / 2; +} + +void __init ar5312_plat_mem_setup(void) +{ + void __iomem *sdram_base; + u32 memsize, memcfg, bank0_ac, bank1_ac; + u32 devid; + + /* Detect memory size */ + sdram_base = ioremap_nocache(AR5312_SDRAMCTL_BASE, + AR5312_SDRAMCTL_SIZE); + memcfg = __raw_readl(sdram_base + AR5312_MEM_CFG1); + bank0_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC0); + bank1_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC1); + memsize = (bank0_ac ? (1 << (bank0_ac + 1)) : 0) + + (bank1_ac ? (1 << (bank1_ac + 1)) : 0); + memsize <<= 20; + add_memory_region(0, memsize, BOOT_MEM_RAM); + iounmap(sdram_base); + + ar5312_rst_base = ioremap_nocache(AR5312_RST_BASE, AR5312_RST_SIZE); + + devid = ar5312_rst_reg_read(AR5312_REV); + devid >>= AR5312_REV_WMAC_MIN_S; + devid &= AR5312_REV_CHIP; + ath25_board.devid = (u16)devid; + + /* Clear any lingering AHB errors */ + ar5312_rst_reg_read(AR5312_PROCADDR); + ar5312_rst_reg_read(AR5312_DMAADDR); + ar5312_rst_reg_write(AR5312_WDT_CTRL, AR5312_WDT_CTRL_IGNORE); + + _machine_restart = ar5312_restart; +} + +void __init ar5312_arch_init(void) +{ + unsigned irq = irq_create_mapping(ar5312_misc_irq_domain, + AR5312_MISC_IRQ_UART0); + + ath25_serial_setup(AR5312_UART0_BASE, irq, ar5312_sys_frequency()); +} --- /dev/null +++ b/arch/mips/ath25/ar2315.c @@ -0,0 +1,308 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz + * Copyright (C) 2006 Felix Fietkau + * Copyright (C) 2012 Alexandros C. Couloumbis + */ + +/* + * Platform devices for Atheros AR2315 SoCs + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "devices.h" +#include "ar2315.h" +#include "ar2315_regs.h" + +static void __iomem *ar2315_rst_base; +static struct irq_domain *ar2315_misc_irq_domain; + +static inline u32 ar2315_rst_reg_read(u32 reg) +{ + return __raw_readl(ar2315_rst_base + reg); +} + +static inline void ar2315_rst_reg_write(u32 reg, u32 val) +{ + __raw_writel(val, ar2315_rst_base + reg); +} + +static inline void ar2315_rst_reg_mask(u32 reg, u32 mask, u32 val) +{ + u32 ret = ar2315_rst_reg_read(reg); + + ret &= ~mask; + ret |= val; + ar2315_rst_reg_write(reg, ret); +} + +static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id) +{ + ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET); + ar2315_rst_reg_read(AR2315_AHB_ERR1); + + pr_emerg("AHB fatal error\n"); + machine_restart("AHB error"); /* Catastrophic failure */ + + return IRQ_HANDLED; +} + +static struct irqaction ar2315_ahb_err_interrupt = { + .handler = ar2315_ahb_err_handler, + .name = "ar2315-ahb-error", +}; + +static void ar2315_misc_irq_handler(unsigned irq, struct irq_desc *desc) +{ + u32 pending = ar2315_rst_reg_read(AR2315_ISR) & + ar2315_rst_reg_read(AR2315_IMR); + unsigned nr, misc_irq = 0; + + if (pending) { + struct irq_domain *domain = irq_get_handler_data(irq); + + nr = __ffs(pending); + misc_irq = irq_find_mapping(domain, nr); + } + + if (misc_irq) { + if (nr == AR2315_MISC_IRQ_GPIO) + ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_GPIO); + else if (nr == AR2315_MISC_IRQ_WATCHDOG) + ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_WD); + generic_handle_irq(misc_irq); + } else { + spurious_interrupt(); + } +} + +static void ar2315_misc_irq_unmask(struct irq_data *d) +{ + ar2315_rst_reg_mask(AR2315_IMR, 0, BIT(d->hwirq)); +} + +static void ar2315_misc_irq_mask(struct irq_data *d) +{ + ar2315_rst_reg_mask(AR2315_IMR, BIT(d->hwirq), 0); +} + +static struct irq_chip ar2315_misc_irq_chip = { + .name = "ar2315-misc", + .irq_unmask = ar2315_misc_irq_unmask, + .irq_mask = ar2315_misc_irq_mask, +}; + +static int ar2315_misc_irq_map(struct irq_domain *d, unsigned irq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(irq, &ar2315_misc_irq_chip, handle_level_irq); + return 0; +} + +static struct irq_domain_ops ar2315_misc_irq_domain_ops = { + .map = ar2315_misc_irq_map, +}; + +/* + * Called when an interrupt is received, this function + * determines exactly which interrupt it was, and it + * invokes the appropriate handler. + * + * Implicitly, we also define interrupt priority by + * choosing which to dispatch first. + */ +static void ar2315_irq_dispatch(void) +{ + u32 pending = read_c0_status() & read_c0_cause(); + + if (pending & CAUSEF_IP3) + do_IRQ(AR2315_IRQ_WLAN0); + else if (pending & CAUSEF_IP2) + do_IRQ(AR2315_IRQ_MISC); + else if (pending & CAUSEF_IP7) + do_IRQ(ATH25_IRQ_CPU_CLOCK); + else + spurious_interrupt(); +} + +void __init ar2315_arch_init_irq(void) +{ + struct irq_domain *domain; + unsigned irq; + + ath25_irq_dispatch = ar2315_irq_dispatch; + + domain = irq_domain_add_linear(NULL, AR2315_MISC_IRQ_COUNT, + &ar2315_misc_irq_domain_ops, NULL); + if (!domain) + panic("Failed to add IRQ domain"); + + irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB); + setup_irq(irq, &ar2315_ahb_err_interrupt); + + irq_set_chained_handler(AR2315_IRQ_MISC, ar2315_misc_irq_handler); + irq_set_handler_data(AR2315_IRQ_MISC, domain); + + ar2315_misc_irq_domain = domain; +} + +void __init ar2315_init_devices(void) +{ + /* Find board configuration */ + ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE); + + ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0); +} + +static void ar2315_restart(char *command) +{ + void (*mips_reset_vec)(void) = (void *)0xbfc00000; + + local_irq_disable(); + + /* try reset the system via reset control */ + ar2315_rst_reg_write(AR2315_COLD_RESET, AR2317_RESET_SYSTEM); + + /* Cold reset does not work on the AR2315/6, use the GPIO reset bits + * a workaround. Give it some time to attempt a gpio based hardware + * reset (atheros reference design workaround) */ + + /* TODO: implement the GPIO reset workaround */ + + /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic + * workaround. Attempt to jump to the mips reset location - + * the boot loader itself might be able to recover the system */ + mips_reset_vec(); +} + +/* + * This table is indexed by bits 5..4 of the CLOCKCTL1 register + * to determine the predevisor value. + */ +static int clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 }; +static int pllc_divide_table[5] __initdata = { 2, 3, 4, 6, 3 }; + +static unsigned __init ar2315_sys_clk(u32 clock_ctl) +{ + unsigned int pllc_ctrl, cpu_div; + unsigned int pllc_out, refdiv, fdiv, divby2; + unsigned int clk_div; + + pllc_ctrl = ar2315_rst_reg_read(AR2315_PLLC_CTL); + refdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_REF_DIV); + refdiv = clockctl1_predivide_table[refdiv]; + fdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_FDBACK_DIV); + divby2 = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_ADD_FDBACK_DIV) + 1; + pllc_out = (40000000 / refdiv) * (2 * divby2) * fdiv; + + /* clkm input selected */ + switch (clock_ctl & AR2315_CPUCLK_CLK_SEL_M) { + case 0: + case 1: + clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKM_DIV); + clk_div = pllc_divide_table[clk_div]; + break; + case 2: + clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKC_DIV); + clk_div = pllc_divide_table[clk_div]; + break; + default: + pllc_out = 40000000; + clk_div = 1; + break; + } + + cpu_div = ATH25_REG_MS(clock_ctl, AR2315_CPUCLK_CLK_DIV); + cpu_div = cpu_div * 2 ?: 1; + + return pllc_out / (clk_div * cpu_div); +} + +static inline unsigned ar2315_cpu_frequency(void) +{ + return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_CPUCLK)); +} + +static inline unsigned ar2315_apb_frequency(void) +{ + return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_AMBACLK)); +} + +void __init ar2315_plat_time_init(void) +{ + mips_hpt_frequency = ar2315_cpu_frequency() / 2; +} + +void __init ar2315_plat_mem_setup(void) +{ + void __iomem *sdram_base; + u32 memsize, memcfg; + u32 devid; + u32 config; + + /* Detect memory size */ + sdram_base = ioremap_nocache(AR2315_SDRAMCTL_BASE, + AR2315_SDRAMCTL_SIZE); + memcfg = __raw_readl(sdram_base + AR2315_MEM_CFG); + memsize = 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_DATA_WIDTH); + memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_COL_WIDTH); + memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_ROW_WIDTH); + memsize <<= 3; + add_memory_region(0, memsize, BOOT_MEM_RAM); + iounmap(sdram_base); + + ar2315_rst_base = ioremap_nocache(AR2315_RST_BASE, AR2315_RST_SIZE); + + /* Detect the hardware based on the device ID */ + devid = ar2315_rst_reg_read(AR2315_SREV) & AR2315_REV_CHIP; + switch (devid) { + case 0x91: /* Need to check */ + ath25_soc = ATH25_SOC_AR2318; + break; + case 0x90: + ath25_soc = ATH25_SOC_AR2317; + break; + case 0x87: + ath25_soc = ATH25_SOC_AR2316; + break; + case 0x86: + default: + ath25_soc = ATH25_SOC_AR2315; + break; + } + ath25_board.devid = devid; + + /* Clear any lingering AHB errors */ + config = read_c0_config(); + write_c0_config(config & ~0x3); + ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET); + ar2315_rst_reg_read(AR2315_AHB_ERR1); + ar2315_rst_reg_write(AR2315_WDT_CTRL, AR2315_WDT_CTRL_IGNORE); + + _machine_restart = ar2315_restart; +} + +void __init ar2315_arch_init(void) +{ + unsigned irq = irq_create_mapping(ar2315_misc_irq_domain, + AR2315_MISC_IRQ_UART0); + + ath25_serial_setup(AR2315_UART0_BASE, irq, ar2315_apb_frequency()); +} --- /dev/null +++ b/arch/mips/ath25/ar2315.h @@ -0,0 +1,22 @@ +#ifndef __AR2315_H +#define __AR2315_H + +#ifdef CONFIG_SOC_AR2315 + +void ar2315_arch_init_irq(void); +void ar2315_init_devices(void); +void ar2315_plat_time_init(void); +void ar2315_plat_mem_setup(void); +void ar2315_arch_init(void); + +#else + +static inline void ar2315_arch_init_irq(void) {} +static inline void ar2315_init_devices(void) {} +static inline void ar2315_plat_time_init(void) {} +static inline void ar2315_plat_mem_setup(void) {} +static inline void ar2315_arch_init(void) {} + +#endif + +#endif /* __AR2315_H */ --- /dev/null +++ b/arch/mips/ath25/ar5312.h @@ -0,0 +1,22 @@ +#ifndef __AR5312_H +#define __AR5312_H + +#ifdef CONFIG_SOC_AR5312 + +void ar5312_arch_init_irq(void); +void ar5312_init_devices(void); +void ar5312_plat_time_init(void); +void ar5312_plat_mem_setup(void); +void ar5312_arch_init(void); + +#else + +static inline void ar5312_arch_init_irq(void) {} +static inline void ar5312_init_devices(void) {} +static inline void ar5312_plat_time_init(void) {} +static inline void ar5312_plat_mem_setup(void) {} +static inline void ar5312_arch_init(void) {} + +#endif + +#endif /* __AR5312_H */ --- /dev/null +++ b/arch/mips/ath25/devices.h @@ -0,0 +1,43 @@ +#ifndef __ATH25_DEVICES_H +#define __ATH25_DEVICES_H + +#include + +#define ATH25_REG_MS(_val, _field) (((_val) & _field##_M) >> _field##_S) + +#define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */ + +enum ath25_soc_type { + /* handled by ar5312.c */ + ATH25_SOC_AR2312, + ATH25_SOC_AR2313, + ATH25_SOC_AR5312, + + /* handled by ar2315.c */ + ATH25_SOC_AR2315, + ATH25_SOC_AR2316, + ATH25_SOC_AR2317, + ATH25_SOC_AR2318, + + ATH25_SOC_UNKNOWN +}; + +extern enum ath25_soc_type ath25_soc; +extern struct ar231x_board_config ath25_board; +extern void (*ath25_irq_dispatch)(void); + +int ath25_find_config(phys_addr_t offset, unsigned long size); +void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk); +int ath25_add_wmac(int nr, u32 base, int irq); + +static inline bool is_ar2315(void) +{ + return (current_cpu_data.cputype == CPU_4KEC); +} + +static inline bool is_ar5312(void) +{ + return !is_ar2315(); +} + +#endif --- /dev/null +++ b/arch/mips/ath25/devices.c @@ -0,0 +1,125 @@ +#include +#include +#include +#include +#include + +#include +#include "devices.h" +#include "ar5312.h" +#include "ar2315.h" + +struct ar231x_board_config ath25_board; +enum ath25_soc_type ath25_soc = ATH25_SOC_UNKNOWN; + +static struct resource ath25_wmac0_res[] = { + { + .name = "wmac0_membase", + .flags = IORESOURCE_MEM, + }, + { + .name = "wmac0_irq", + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource ath25_wmac1_res[] = { + { + .name = "wmac1_membase", + .flags = IORESOURCE_MEM, + }, + { + .name = "wmac1_irq", + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device ath25_wmac[] = { + { + .id = 0, + .name = "ar231x-wmac", + .resource = ath25_wmac0_res, + .num_resources = ARRAY_SIZE(ath25_wmac0_res), + .dev.platform_data = &ath25_board, + }, + { + .id = 1, + .name = "ar231x-wmac", + .resource = ath25_wmac1_res, + .num_resources = ARRAY_SIZE(ath25_wmac1_res), + .dev.platform_data = &ath25_board, + }, +}; + +static const char * const soc_type_strings[] = { + [ATH25_SOC_AR5312] = "Atheros AR5312", + [ATH25_SOC_AR2312] = "Atheros AR2312", + [ATH25_SOC_AR2313] = "Atheros AR2313", + [ATH25_SOC_AR2315] = "Atheros AR2315", + [ATH25_SOC_AR2316] = "Atheros AR2316", + [ATH25_SOC_AR2317] = "Atheros AR2317", + [ATH25_SOC_AR2318] = "Atheros AR2318", + [ATH25_SOC_UNKNOWN] = "Atheros (unknown)", +}; + +const char *get_system_type(void) +{ + if ((ath25_soc >= ARRAY_SIZE(soc_type_strings)) || + !soc_type_strings[ath25_soc]) + return soc_type_strings[ATH25_SOC_UNKNOWN]; + return soc_type_strings[ath25_soc]; +} + +void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk) +{ + struct uart_port s; + + memset(&s, 0, sizeof(s)); + + s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP; + s.iotype = UPIO_MEM32; + s.irq = irq; + s.regshift = 2; + s.mapbase = mapbase; + s.uartclk = uartclk; + + early_serial_setup(&s); +} + +int __init ath25_add_wmac(int nr, u32 base, int irq) +{ + struct resource *res; + + ath25_wmac[nr].dev.platform_data = &ath25_board; + res = &ath25_wmac[nr].resource[0]; + res->start = base; + res->end = base + 0x10000 - 1; + res++; + res->start = irq; + res->end = irq; + return platform_device_register(&ath25_wmac[nr]); +} + +static int __init ath25_register_devices(void) +{ + if (is_ar5312()) + ar5312_init_devices(); + else + ar2315_init_devices(); + + return 0; +} + +device_initcall(ath25_register_devices); + +static int __init ath25_arch_init(void) +{ + if (is_ar5312()) + ar5312_arch_init(); + else + ar2315_arch_init(); + + return 0; +} + +arch_initcall(ath25_arch_init);