From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001 From: James <> Date: Wed, 4 Nov 2015 11:49:21 +0000 Subject: trunk-47381 --- ...pci-Increase-headroom-on-received-packets.patch | 54 ++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 target/linux/generic/patches-4.1/081-solos-pci-Increase-headroom-on-received-packets.patch (limited to 'target/linux/generic/patches-4.1/081-solos-pci-Increase-headroom-on-received-packets.patch') diff --git a/target/linux/generic/patches-4.1/081-solos-pci-Increase-headroom-on-received-packets.patch b/target/linux/generic/patches-4.1/081-solos-pci-Increase-headroom-on-received-packets.patch new file mode 100644 index 0000000..605f57a --- /dev/null +++ b/target/linux/generic/patches-4.1/081-solos-pci-Increase-headroom-on-received-packets.patch @@ -0,0 +1,54 @@ +From: David Woodhouse +Date: Thu, 17 Sep 2015 11:19:53 +0100 +Subject: [PATCH] solos-pci: Increase headroom on received packets +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +A comment in include/linux/skbuff.h says that: + + * Various parts of the networking layer expect at least 32 bytes of + * headroom, you should not reduce this. + +This was demonstrated by a panic when handling fragmented IPv6 packets: +http://marc.info/?l=linux-netdev&m=144236093519172&w=2 + +It's not entirely clear if that comment is still valid — and if it is, +perhaps netif_rx() ought to be enforcing it with a warning. + +But either way, it is rather stupid from a performance point of view +for us to be receiving packets into a buffer which doesn't have enough +room to prepend an Ethernet header — it means that *every* incoming +packet is going to be need to be reallocated. So let's fix that. + +Signed-off-by: David Woodhouse +--- + +--- a/drivers/atm/solos-pci.c ++++ b/drivers/atm/solos-pci.c +@@ -805,7 +805,12 @@ static void solos_bh(unsigned long card_ + continue; + } + +- skb = alloc_skb(size + 1, GFP_ATOMIC); ++ /* Use netdev_alloc_skb() because it adds NET_SKB_PAD of ++ * headroom, and ensures we can route packets back out an ++ * Ethernet interface (for example) without having to ++ * reallocate. Adding NET_IP_ALIGN also ensures that both ++ * PPPoATM and PPPoEoBR2684 packets end up aligned. */ ++ skb = netdev_alloc_skb_ip_align(NULL, size + 1); + if (!skb) { + if (net_ratelimit()) + dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n"); +@@ -869,7 +874,10 @@ static void solos_bh(unsigned long card_ + /* Allocate RX skbs for any ports which need them */ + if (card->using_dma && card->atmdev[port] && + !card->rx_skb[port]) { +- struct sk_buff *skb = alloc_skb(RX_DMA_SIZE, GFP_ATOMIC); ++ /* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN ++ * here; the FPGA can only DMA to addresses which are ++ * aligned to 4 bytes. */ ++ struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE); + if (skb) { + SKB_CB(skb)->dma_addr = + dma_map_single(&card->dev->dev, skb->data, -- cgit v1.2.3