From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001 From: James <> Date: Wed, 4 Nov 2015 11:49:21 +0000 Subject: trunk-47381 --- .../880-gateworks_system_controller.patch | 339 +++++++++++++++++++++ 1 file changed, 339 insertions(+) create mode 100644 target/linux/generic/patches-4.0/880-gateworks_system_controller.patch (limited to 'target/linux/generic/patches-4.0/880-gateworks_system_controller.patch') diff --git a/target/linux/generic/patches-4.0/880-gateworks_system_controller.patch b/target/linux/generic/patches-4.0/880-gateworks_system_controller.patch new file mode 100644 index 0000000..32796d5 --- /dev/null +++ b/target/linux/generic/patches-4.0/880-gateworks_system_controller.patch @@ -0,0 +1,339 @@ +--- a/drivers/hwmon/Kconfig ++++ b/drivers/hwmon/Kconfig +@@ -507,6 +507,15 @@ config SENSORS_G762 + This driver can also be built as a module. If so, the module + will be called g762. + ++config SENSORS_GSC ++ tristate "Gateworks System Controller" ++ depends on I2C ++ help ++ If you say yes here you get support for the Gateworks System Controller. ++ ++ This driver can also be built as a module. If so, the module ++ will be called gsc. ++ + config SENSORS_GPIO_FAN + tristate "GPIO fan" + depends on GPIOLIB +--- a/drivers/hwmon/Makefile ++++ b/drivers/hwmon/Makefile +@@ -155,6 +155,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l7 + obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o + obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o + obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o ++obj-$(CONFIG_SENSORS_GSC) += gsc.o + + obj-$(CONFIG_PMBUS) += pmbus/ + +--- /dev/null ++++ b/drivers/hwmon/gsc.c +@@ -0,0 +1,308 @@ ++/* ++ * A hwmon driver for the Gateworks System Controller ++ * Copyright (C) 2009 Gateworks Corporation ++ * ++ * Author: Chris Lang ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License, ++ * as published by the Free Software Foundation - version 2. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRV_VERSION "0.2" ++ ++enum chips { gsp }; ++ ++/* AD7418 registers */ ++#define GSP_REG_TEMP_IN 0x00 ++#define GSP_REG_VIN 0x02 ++#define GSP_REG_3P3 0x05 ++#define GSP_REG_BAT 0x08 ++#define GSP_REG_5P0 0x0b ++#define GSP_REG_CORE 0x0e ++#define GSP_REG_CPU1 0x11 ++#define GSP_REG_CPU2 0x14 ++#define GSP_REG_DRAM 0x17 ++#define GSP_REG_EXT_BAT 0x1a ++#define GSP_REG_IO1 0x1d ++#define GSP_REG_IO2 0x20 ++#define GSP_REG_PCIE 0x23 ++#define GSP_REG_CURRENT 0x26 ++#define GSP_FAN_0 0x2C ++#define GSP_FAN_1 0x2E ++#define GSP_FAN_2 0x30 ++#define GSP_FAN_3 0x32 ++#define GSP_FAN_4 0x34 ++#define GSP_FAN_5 0x36 ++ ++struct gsp_sensor_info { ++ const char* name; ++ int reg; ++}; ++ ++static const struct gsp_sensor_info gsp_sensors[] = { ++ {"temp", GSP_REG_TEMP_IN}, ++ {"vin", GSP_REG_VIN}, ++ {"3p3", GSP_REG_3P3}, ++ {"bat", GSP_REG_BAT}, ++ {"5p0", GSP_REG_5P0}, ++ {"core", GSP_REG_CORE}, ++ {"cpu1", GSP_REG_CPU1}, ++ {"cpu2", GSP_REG_CPU2}, ++ {"dram", GSP_REG_DRAM}, ++ {"ext_bat", GSP_REG_EXT_BAT}, ++ {"io1", GSP_REG_IO1}, ++ {"io2", GSP_REG_IO2}, ++ {"pci2", GSP_REG_PCIE}, ++ {"current", GSP_REG_CURRENT}, ++ {"fan_point0", GSP_FAN_0}, ++ {"fan_point1", GSP_FAN_1}, ++ {"fan_point2", GSP_FAN_2}, ++ {"fan_point3", GSP_FAN_3}, ++ {"fan_point4", GSP_FAN_4}, ++ {"fan_point5", GSP_FAN_5}, ++}; ++ ++struct gsp_data { ++ struct device *hwmon_dev; ++ struct attribute_group attrs; ++ enum chips type; ++}; ++ ++static int gsp_probe(struct i2c_client *client, ++ const struct i2c_device_id *id); ++static int gsp_remove(struct i2c_client *client); ++ ++static const struct i2c_device_id gsp_id[] = { ++ { "gsp", 0 }, ++ { } ++}; ++MODULE_DEVICE_TABLE(i2c, gsp_id); ++ ++static struct i2c_driver gsp_driver = { ++ .driver = { ++ .name = "gsp", ++ }, ++ .probe = gsp_probe, ++ .remove = gsp_remove, ++ .id_table = gsp_id, ++}; ++ ++/* All registers are word-sized, except for the configuration registers. ++ * AD7418 uses a high-byte first convention. Do NOT use those functions to ++ * access the configuration registers CONF and CONF2, as they are byte-sized. ++ */ ++static inline int gsp_read(struct i2c_client *client, u8 reg) ++{ ++ unsigned int adc = 0; ++ if (reg == GSP_REG_TEMP_IN || reg > GSP_REG_CURRENT) ++ { ++ adc |= i2c_smbus_read_byte_data(client, reg); ++ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8; ++ return adc; ++ } ++ else ++ { ++ adc |= i2c_smbus_read_byte_data(client, reg); ++ adc |= i2c_smbus_read_byte_data(client, reg + 1) << 8; ++ adc |= i2c_smbus_read_byte_data(client, reg + 2) << 16; ++ return adc; ++ } ++} ++ ++static inline int gsp_write(struct i2c_client *client, u8 reg, u16 value) ++{ ++ i2c_smbus_write_byte_data(client, reg, value & 0xff); ++ i2c_smbus_write_byte_data(client, reg + 1, ((value >> 8) & 0xff)); ++ return 1; ++} ++ ++static ssize_t show_adc(struct device *dev, struct device_attribute *devattr, ++ char *buf) ++{ ++ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); ++ struct i2c_client *client = to_i2c_client(dev); ++ return sprintf(buf, "%d\n", gsp_read(client, gsp_sensors[attr->index].reg)); ++} ++ ++static ssize_t show_label(struct device *dev, ++ struct device_attribute *devattr, char *buf) ++{ ++ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); ++ ++ return sprintf(buf, "%s\n", gsp_sensors[attr->index].name); ++} ++ ++static ssize_t store_fan(struct device *dev, ++ struct device_attribute *devattr, const char *buf, size_t count) ++{ ++ u16 val; ++ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); ++ struct i2c_client *client = to_i2c_client(dev); ++ val = simple_strtoul(buf, NULL, 10); ++ gsp_write(client, gsp_sensors[attr->index].reg, val); ++ return count; ++} ++ ++static SENSOR_DEVICE_ATTR(temp0_input, S_IRUGO, show_adc, NULL, 0); ++static SENSOR_DEVICE_ATTR(temp0_label, S_IRUGO, show_label, NULL, 0); ++ ++static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_adc, NULL, 1); ++static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL, 1); ++static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_adc, NULL, 2); ++static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_label, NULL, 2); ++static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_adc, NULL, 3); ++static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_label, NULL, 3); ++static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 4); ++static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 4); ++static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 5); ++static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_label, NULL, 5); ++static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_adc, NULL, 6); ++static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_label, NULL, 6); ++static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_adc, NULL, 7); ++static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_label, NULL, 7); ++static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_adc, NULL, 8); ++static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 8); ++static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_adc, NULL, 9); ++static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 9); ++static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_adc, NULL, 10); ++static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 10); ++static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_adc, NULL, 11); ++static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_label, NULL, 11); ++static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_adc, NULL, 12); ++static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_label, NULL, 12); ++static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_adc, NULL, 13); ++static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_label, NULL, 13); ++ ++static SENSOR_DEVICE_ATTR(fan0_point0, S_IRUGO | S_IWUSR, show_adc, store_fan, 14); ++static SENSOR_DEVICE_ATTR(fan0_point1, S_IRUGO | S_IWUSR, show_adc, store_fan, 15); ++static SENSOR_DEVICE_ATTR(fan0_point2, S_IRUGO | S_IWUSR, show_adc, store_fan, 16); ++static SENSOR_DEVICE_ATTR(fan0_point3, S_IRUGO | S_IWUSR, show_adc, store_fan, 17); ++static SENSOR_DEVICE_ATTR(fan0_point4, S_IRUGO | S_IWUSR, show_adc, store_fan, 18); ++static SENSOR_DEVICE_ATTR(fan0_point5, S_IRUGO | S_IWUSR, show_adc, store_fan, 19); ++ ++static struct attribute *gsp_attributes[] = { ++ &sensor_dev_attr_temp0_input.dev_attr.attr, ++ &sensor_dev_attr_in0_input.dev_attr.attr, ++ &sensor_dev_attr_in1_input.dev_attr.attr, ++ &sensor_dev_attr_in2_input.dev_attr.attr, ++ &sensor_dev_attr_in3_input.dev_attr.attr, ++ &sensor_dev_attr_in4_input.dev_attr.attr, ++ &sensor_dev_attr_in5_input.dev_attr.attr, ++ &sensor_dev_attr_in6_input.dev_attr.attr, ++ &sensor_dev_attr_in7_input.dev_attr.attr, ++ &sensor_dev_attr_in8_input.dev_attr.attr, ++ &sensor_dev_attr_in9_input.dev_attr.attr, ++ &sensor_dev_attr_in10_input.dev_attr.attr, ++ &sensor_dev_attr_in11_input.dev_attr.attr, ++ &sensor_dev_attr_in12_input.dev_attr.attr, ++ ++ &sensor_dev_attr_temp0_label.dev_attr.attr, ++ &sensor_dev_attr_in0_label.dev_attr.attr, ++ &sensor_dev_attr_in1_label.dev_attr.attr, ++ &sensor_dev_attr_in2_label.dev_attr.attr, ++ &sensor_dev_attr_in3_label.dev_attr.attr, ++ &sensor_dev_attr_in4_label.dev_attr.attr, ++ &sensor_dev_attr_in5_label.dev_attr.attr, ++ &sensor_dev_attr_in6_label.dev_attr.attr, ++ &sensor_dev_attr_in7_label.dev_attr.attr, ++ &sensor_dev_attr_in8_label.dev_attr.attr, ++ &sensor_dev_attr_in9_label.dev_attr.attr, ++ &sensor_dev_attr_in10_label.dev_attr.attr, ++ &sensor_dev_attr_in11_label.dev_attr.attr, ++ &sensor_dev_attr_in12_label.dev_attr.attr, ++ ++ &sensor_dev_attr_fan0_point0.dev_attr.attr, ++ &sensor_dev_attr_fan0_point1.dev_attr.attr, ++ &sensor_dev_attr_fan0_point2.dev_attr.attr, ++ &sensor_dev_attr_fan0_point3.dev_attr.attr, ++ &sensor_dev_attr_fan0_point4.dev_attr.attr, ++ &sensor_dev_attr_fan0_point5.dev_attr.attr, ++ NULL ++}; ++ ++ ++static int gsp_probe(struct i2c_client *client, ++ const struct i2c_device_id *id) ++{ ++ struct i2c_adapter *adapter = client->adapter; ++ struct gsp_data *data; ++ int err; ++ ++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | ++ I2C_FUNC_SMBUS_WORD_DATA)) { ++ err = -EOPNOTSUPP; ++ goto exit; ++ } ++ ++ if (!(data = kzalloc(sizeof(struct gsp_data), GFP_KERNEL))) { ++ err = -ENOMEM; ++ goto exit; ++ } ++ ++ i2c_set_clientdata(client, data); ++ ++ data->type = id->driver_data; ++ ++ switch (data->type) { ++ case 0: ++ data->attrs.attrs = gsp_attributes; ++ break; ++ } ++ ++ dev_info(&client->dev, "%s chip found\n", client->name); ++ ++ /* Register sysfs hooks */ ++ if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs))) ++ goto exit_free; ++ ++ data->hwmon_dev = hwmon_device_register(&client->dev); ++ if (IS_ERR(data->hwmon_dev)) { ++ err = PTR_ERR(data->hwmon_dev); ++ goto exit_remove; ++ } ++ ++ return 0; ++ ++exit_remove: ++ sysfs_remove_group(&client->dev.kobj, &data->attrs); ++exit_free: ++ kfree(data); ++exit: ++ return err; ++} ++ ++static int gsp_remove(struct i2c_client *client) ++{ ++ struct gsp_data *data = i2c_get_clientdata(client); ++ hwmon_device_unregister(data->hwmon_dev); ++ sysfs_remove_group(&client->dev.kobj, &data->attrs); ++ kfree(data); ++ return 0; ++} ++ ++static int __init gsp_init(void) ++{ ++ return i2c_add_driver(&gsp_driver); ++} ++ ++static void __exit gsp_exit(void) ++{ ++ i2c_del_driver(&gsp_driver); ++} ++ ++module_init(gsp_init); ++module_exit(gsp_exit); ++ ++MODULE_AUTHOR("Chris Lang "); ++MODULE_DESCRIPTION("GSC HWMON driver"); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(DRV_VERSION); ++ -- cgit v1.2.3