From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001 From: James <> Date: Wed, 4 Nov 2015 11:49:21 +0000 Subject: trunk-47381 --- .../generic/patches-4.0/726-phy_rtl8366.patch | 45 ++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 target/linux/generic/patches-4.0/726-phy_rtl8366.patch (limited to 'target/linux/generic/patches-4.0/726-phy_rtl8366.patch') diff --git a/target/linux/generic/patches-4.0/726-phy_rtl8366.patch b/target/linux/generic/patches-4.0/726-phy_rtl8366.patch new file mode 100644 index 0000000..3213f1e --- /dev/null +++ b/target/linux/generic/patches-4.0/726-phy_rtl8366.patch @@ -0,0 +1,45 @@ +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -250,6 +250,30 @@ config MDIO_BCM_UNIMAC + controllers as well as some Broadcom Ethernet switches such as the + Starfighter 2 switches. + ++config RTL8366_SMI ++ tristate "Driver for the RTL8366 SMI interface" ++ depends on GPIOLIB ++ ---help--- ++ This module implements the SMI interface protocol which is used ++ by some RTL8366 ethernet switch devices via the generic GPIO API. ++ ++if RTL8366_SMI ++ ++config RTL8366_SMI_DEBUG_FS ++ bool "RTL8366 SMI interface debugfs support" ++ depends on DEBUG_FS ++ default n ++ ++config RTL8366S_PHY ++ tristate "Driver for the Realtek RTL8366S switch" ++ select SWCONFIG ++ ++config RTL8366RB_PHY ++ tristate "Driver for the Realtek RTL8366RB switch" ++ select SWCONFIG ++ ++endif # RTL8366_SMI ++ + endif # PHYLIB + + config MICREL_KS8995MA +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -24,6 +24,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o + obj-$(CONFIG_REALTEK_PHY) += realtek.o + obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o + obj-$(CONFIG_RTL8306_PHY) += rtl8306.o ++obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o ++obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o ++obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o + obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o + obj-$(CONFIG_FIXED_PHY) += fixed_phy.o + obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o -- cgit v1.2.3