From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001
From: James <>
Date: Wed, 4 Nov 2015 11:49:21 +0000
Subject: trunk-47381

---
 .../112-bcm53xx-sprom-add-sprom-driver.patch       | 69 ++++++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 target/linux/bcm53xx/patches-4.3/112-bcm53xx-sprom-add-sprom-driver.patch

(limited to 'target/linux/bcm53xx/patches-4.3/112-bcm53xx-sprom-add-sprom-driver.patch')

diff --git a/target/linux/bcm53xx/patches-4.3/112-bcm53xx-sprom-add-sprom-driver.patch b/target/linux/bcm53xx/patches-4.3/112-bcm53xx-sprom-add-sprom-driver.patch
new file mode 100644
index 0000000..70ab039
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/112-bcm53xx-sprom-add-sprom-driver.patch
@@ -0,0 +1,69 @@
+From 4e0ab3269a6d260a41a3673157753147f5f71341 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 4 May 2014 13:19:20 +0200
+Subject: [PATCH 03/17] bcm47xx-sprom: add Broadcom sprom parser driver
+
+This driver needs an nvram driver and fetches the sprom values from the
+nvram and provides it to any other driver. The calibration data for the
+wifi chip the mac address and some more board description data is
+stores in the sprom.
+
+This is based on a copy of arch/mips/bcm47xx/sprom.c and my plan is to
+make the bcm47xx MIPS SoCs also use this driver some time later.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ .../devicetree/bindings/misc/bcm47xx-sprom.txt     |  16 +
+ drivers/misc/Kconfig                               |  11 +
+ drivers/misc/Makefile                              |   1 +
+ drivers/misc/bcm47xx-sprom.c                       | 690 +++++++++++++++++++++
+ 4 files changed, 718 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
+ create mode 100644 drivers/misc/bcm47xx-sprom.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
+@@ -0,0 +1,16 @@
++Broadcom bcm47xx/bcm53xx sprom converter
++
++This driver provbides an sprom based on a given nvram.
++
++Required properties:
++
++- compatible : brcm,bcm47xx-sprom
++
++- nvram : reference to a nvram driver, e.g. bcm47xx-nvram
++
++Example:
++
++sprom0: sprom@0 {
++	compatible = "brcm,bcm47xx-sprom";
++	nvram = <&nvram0>;
++};
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -525,6 +525,17 @@ config VEXPRESS_SYSCFG
+ 	  bus. System Configuration interface is one of the possible means
+ 	  of generating transactions on this bus.
+ 
++config BCM47XX_SPROM
++	tristate "BCM47XX sprom driver"
++	help
++	  This driver parses the sprom from a given nvram which is found on
++	  Broadcom bcm47xx and bcm53xx SoCs.
++
++	  The sprom contains board configuration data like the
++	  calibration data fro the wifi chips, the mac addresses used
++	  by the board and many other board configuration data. This
++	  driver will provide the sprom to bcma.
++
+ source "drivers/misc/c2port/Kconfig"
+ source "drivers/misc/eeprom/Kconfig"
+ source "drivers/misc/cb710/Kconfig"
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE)		+= genwqe/
+ obj-$(CONFIG_ECHO)		+= echo/
+ obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
+ obj-$(CONFIG_CXL_BASE)		+= cxl/
++obj-$(CONFIG_BCM47XX_SPROM)	+= bcm47xx-sprom.o
-- 
cgit v1.2.3