From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001 From: James <> Date: Wed, 4 Nov 2015 11:49:21 +0000 Subject: trunk-47381 --- .../mips/include/asm/mach-adm5120/adm5120_defs.h | 53 ++++ .../mips/include/asm/mach-adm5120/adm5120_info.h | 129 +++++++++ .../mips/include/asm/mach-adm5120/adm5120_intc.h | 63 +++++ .../mips/include/asm/mach-adm5120/adm5120_mpmc.h | 92 +++++++ .../mips/include/asm/mach-adm5120/adm5120_nand.h | 89 ++++++ .../include/asm/mach-adm5120/adm5120_platform.h | 87 ++++++ .../mips/include/asm/mach-adm5120/adm5120_switch.h | 300 +++++++++++++++++++++ .../mips/include/asm/mach-adm5120/adm5120_uart.h | 64 +++++ .../arch/mips/include/asm/mach-adm5120/asm/sizes.h | 56 ++++ .../asm/mach-adm5120/cpu-feature-overrides.h | 71 +++++ .../arch/mips/include/asm/mach-adm5120/gpio.h | 115 ++++++++ .../arch/mips/include/asm/mach-adm5120/irq.h | 43 +++ .../mips/include/asm/mach-adm5120/prom/admboot.h | 17 ++ .../arch/mips/include/asm/mach-adm5120/prom/cfe.h | 18 ++ .../mips/include/asm/mach-adm5120/prom/generic.h | 18 ++ .../mips/include/asm/mach-adm5120/prom/myloader.h | 179 ++++++++++++ .../include/asm/mach-adm5120/prom/routerboot.h | 36 +++ .../mips/include/asm/mach-adm5120/prom/zynos.h | 86 ++++++ .../arch/mips/include/asm/mach-adm5120/war.h | 25 ++ 19 files changed, 1541 insertions(+) create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_defs.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_info.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_intc.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_nand.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_platform.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_switch.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_uart.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/asm/sizes.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/gpio.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/irq.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/admboot.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/cfe.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/generic.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/myloader.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/routerboot.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/zynos.h create mode 100644 target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/war.h (limited to 'target/linux/adm5120/files-3.18/arch/mips/include/asm') diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_defs.h new file mode 100644 index 0000000..bf220ff --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_defs.h @@ -0,0 +1,53 @@ +/* + * ADM5120 SoC definitions + * + * This file defines some constants specific to the ADM5120 SoC + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef _ASM_MIPS_MACH_ADM5120_DEFS_H +#define _ASM_MIPS_MACH_ADM5120_DEFS_H + +#define ADM5120_SDRAM0_BASE 0x00000000 +#define ADM5120_SDRAM1_BASE 0x01000000 +#define ADM5120_SRAM1_BASE 0x10000000 +#define ADM5120_EXTIO0_BASE 0x10C00000 +#define ADM5120_EXTIO0_SIZE 0x00200000 +#define ADM5120_EXTIO1_BASE 0x10E00000 +#define ADM5120_EXTIO1_SIZE 0x00200000 +#define ADM5120_MPMC_BASE 0x11000000 +#define ADM5120_MPMC_SIZE 0x00200000 +#define ADM5120_USBC_BASE 0x11200000 +#define ADM5120_USBC_SIZE 0x00200000 +#define ADM5120_PCIMEM_BASE 0x11400000 +#define ADM5120_PCIMEM_SIZE 0x00100000 +#define ADM5120_PCIIO_BASE 0x11500000 +#define ADM5120_PCIIO_SIZE 0x000FFFF0 +#define ADM5120_PCICFG_ADDR 0x115FFFF0 +#define ADM5120_PCICFG_DATA 0x115FFFF8 +#define ADM5120_PCICFG_SIZE 0x00000010 +#define ADM5120_SWITCH_BASE 0x12000000 +#define ADM5120_SWITCH_SIZE 0x00200000 +#define ADM5120_INTC_BASE 0x12200000 +#define ADM5120_INTC_SIZE 0x00200000 +#define ADM5120_UART0_BASE 0x12600000 +#define ADM5120_UART1_BASE 0x12800000 +#define ADM5120_UART_SIZE 0x00200000 +#define ADM5120_SRAM0_BASE 0x1FC00000 + +#define ADM5120_NAND_BASE ADM5120_SRAM1_BASE +#define ADM5120_NAND_SIZE 0xB + +#define ADM5120_CLK_175 175000000 +#define ADM5120_CLK_200 200000000 +#define ADM5120_CLK_225 225000000 +#define ADM5120_CLK_250 250000000 + +#define ADM5120_UART_CLOCK 62500000 + +#endif /* _ASM_MIPS_MACH_ADM5120_DEFS_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_info.h new file mode 100644 index 0000000..1d34d80 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_info.h @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2007-2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_INFO_H +#define _MACH_ADM5120_INFO_H + +#include + +extern unsigned int adm5120_prom_type; +#define ADM5120_PROM_GENERIC 0 +#define ADM5120_PROM_CFE 1 +#define ADM5120_PROM_MYLOADER 2 +#define ADM5120_PROM_ROUTERBOOT 3 +#define ADM5120_PROM_BOOTBASE 4 +#define ADM5120_PROM_UBOOT 5 +#define ADM5120_PROM_LAST 5 + +extern unsigned int adm5120_product_code; +extern unsigned int adm5120_revision; +extern unsigned int adm5120_nand_boot; + +extern unsigned long adm5120_speed; +#define ADM5120_SPEED_175 175000000 +#define ADM5120_SPEED_200 200000000 +#define ADM5120_SPEED_225 225000000 +#define ADM5120_SPEED_250 250000000 + +extern unsigned int adm5120_package; +#define ADM5120_PACKAGE_PQFP 0 +#define ADM5120_PACKAGE_BGA 1 + +extern unsigned long adm5120_memsize; + +enum { + MACH_ADM5120_GENERIC = 0, /* Generic board */ + MACH_ADM5120_5GXI, /* OSBRiDGE 5GXi/5XLi */ + MACH_ADM5120_BR6104K, /* Edimax BR-6104K */ + MACH_ADM5120_BR6104KP, /* Edimax BR-6104KP */ + MACH_ADM5120_BR61X4WG, /* Edimax BR-6104Wg/BR-6114WG */ + MACH_ADM5120_CAS630, /* Cellvision CAS-630/630W */ + MACH_ADM5120_CAS670, /* Cellvision CAS-670/670W */ + MACH_ADM5120_CAS700, /* Cellvision CAS-700/700W */ + MACH_ADM5120_CAS771, /* Cellvision CAS-771/771W */ + MACH_ADM5120_CAS790, /* Cellvision CAS-790 */ + MACH_ADM5120_CAS861, /* Cellvision CAS-861/861W */ + MACH_ADM5120_EASY5120PATA, /* Infineon EASY 5120P-ATA */ + MACH_ADM5120_EASY5120RT, /* Infineon EASY 5120-RT */ + MACH_ADM5120_EASY5120WVOIP, /* Infineon EASY 5120-WVoIP */ + MACH_ADM5120_EASY83000, /* Infineon EASY-83000 */ + MACH_ADM5120_ES2108, /* ZyXEL Ethernet Switch 2108 */ + MACH_ADM5120_ES2108F, /* ZyXEL Ethernet Switch 2108-F */ + MACH_ADM5120_ES2108G, /* ZyXEL Ethernet Switch 2108-G */ + MACH_ADM5120_ES2108LC, /* ZyXEL Ethernet Switch 2108-LC */ + MACH_ADM5120_ES2108PWR, /* ZyXEL Ethernet Switch 2108-PWR */ + MACH_ADM5120_ES2024A, /* ZyXEL Ethernet Switch 2024A */ + MACH_ADM5120_ES2024PWR, /* ZyXEL Ethernet Switch 2024PWR */ + MACH_ADM5120_HS100, /* ZyXEL HomeSafe 100/100W */ + MACH_ADM5120_NFS101U, /* Cellvision NFS-101U/101WU */ + MACH_ADM5120_NFS202U, /* Cellvision NFS-202U/202WU */ + MACH_ADM5120_NP28G, /* Compex NP28G */ + MACH_ADM5120_NP28GHS, /* Compex NP28G HotSpot */ + MACH_ADM5120_NP27G, /* Compex NP27G */ + MACH_ADM5120_RB_11X, /* Mikrotik RouterBOARD 111/112 */ + MACH_ADM5120_RB_133, /* Mikrotik RouterBOARD 133 */ + MACH_ADM5120_RB_133C, /* Mikrotik RouterBOARD 133c */ + MACH_ADM5120_RB_150, /* Mikrotik RouterBOARD 150 */ + MACH_ADM5120_RB_153, /* Mikrotik RouterBOARD 153 */ + MACH_ADM5120_RB_192, /* Mikrotik RouterBOARD 192 */ + MACH_ADM5120_P334U, /* ZyXEL Prestige 334U */ + MACH_ADM5120_P334W, /* ZyXEL Prestige 334W */ + MACH_ADM5120_P334WH, /* ZyXEL Prestige 334WH */ + MACH_ADM5120_P334WHD, /* ZyXEL Prestige 334WHD */ + MACH_ADM5120_P334WT, /* ZyXEL Prestige 334WT */ + MACH_ADM5120_P335, /* ZyXEL Prestige 335/335WT */ + MACH_ADM5120_P335PLUS, /* ZyXEL Prestige 335Plus */ + MACH_ADM5120_P335U, /* ZyXEL Prestige 335U */ + MACH_ADM5120_PMUGW, /* Motorola Powerline MU Gateway */ + MACH_ADM5120_WP54, /* Compex WP54G/WP54AG/WPP54G/WPP54AG */ + MACH_ADM5120_WP54G_WRT, /* Compex WP54G-WRT */ + MACH_ADM5120_WP54Gv1C, /* Compex WP54G version 1C */ + MACH_ADM5120_EB_214A, /* Generic EB-214A */ +}; + +/* + * TODO:remove adm5120_eth* variables when the switch driver will be + * converted into a real platform driver + */ +extern unsigned int adm5120_eth_num_ports; +extern unsigned char adm5120_eth_macs[6][6]; +extern unsigned char adm5120_eth_vlans[6]; + +extern void adm5120_soc_init(void) __init; +extern void adm5120_mem_init(void) __init; +extern void adm5120_ndelay(u32 ns); + +extern void (*adm5120_board_reset)(void); + +extern void adm5120_gpio_init(void) __init; +extern void adm5120_gpio_csx0_enable(void) __init; +extern void adm5120_gpio_csx1_enable(void) __init; +extern void adm5120_gpio_ew_enable(void) __init; + +static inline int adm5120_package_pqfp(void) +{ + return (adm5120_package == ADM5120_PACKAGE_PQFP); +} + +static inline int adm5120_package_bga(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +static inline int adm5120_has_pci(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +static inline int adm5120_has_gmii(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +#endif /* _MACH_ADM5120_INFO_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_intc.h new file mode 100644 index 0000000..70dd6bb --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_intc.h @@ -0,0 +1,63 @@ +/* + * ADM5120 interrupt controller definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in interrupt controller. + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_INTC_H +#define _MACH_ADM5120_INTC_H + +/* + * INTC register offsets + */ +#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */ +#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */ +#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */ +#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */ +#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR +#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */ +#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */ +#define INTC_REG_IRQ_TEST_SOURCE 0x1C +#define INTC_REG_IRQ_SOURCE_SELECT 0x20 +#define INTC_REG_INT_LEVEL 0x24 + +/* + * INTC IRQ numbers + */ +#define INTC_IRQ_TIMER 0 /* built in timer */ +#define INTC_IRQ_UART0 1 /* built-in UART0 */ +#define INTC_IRQ_UART1 2 /* built-in UART1 */ +#define INTC_IRQ_USBC 3 /* USB Host Controller */ +#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */ +#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */ +#define INTC_IRQ_PCI0 6 /* PCI slot 2 */ +#define INTC_IRQ_PCI1 7 /* PCI slot 3 */ +#define INTC_IRQ_PCI2 8 /* PCI slot 4 */ +#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */ +#define INTC_IRQ_LAST INTC_IRQ_SWITCH +#define INTC_IRQ_COUNT 10 + +/* + * INTC register bits + */ +#define INTC_INT_TIMER (1 << INTC_IRQ_TIMER) +#define INTC_INT_UART0 (1 << INTC_IRQ_UART0) +#define INTC_INT_UART1 (1 << INTC_IRQ_UART1) +#define INTC_INT_USBC (1 << INTC_IRQ_USBC) +#define INTC_INT_INTX0 (1 << INTC_IRQ_INTX0) +#define INTC_INT_INTX1 (1 << INTC_IRQ_INTX1) +#define INTC_INT_PCI0 (1 << INTC_IRQ_PCI0) +#define INTC_INT_PCI1 (1 << INTC_IRQ_PCI1) +#define INTC_INT_PCI2 (1 << INTC_IRQ_PCI2) +#define INTC_INT_SWITCH (1 << INTC_IRQ_SWITCH) +#define INTC_INT_ALL ((1 << INTC_IRQ_COUNT) - 1) + +#endif /* _MACH_ADM5120_INTC_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h new file mode 100644 index 0000000..c4e9591 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h @@ -0,0 +1,92 @@ +/* + * ADM5120 MPMC (Multiport Memory Controller) register definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_MPMC_H +#define _MACH_ADM5120_MPMC_H + +#define MPMC_READ_REG(r) __raw_readl( \ + (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r) +#define MPMC_WRITE_REG(r, v) __raw_writel((v), \ + (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r) + +#define MPMC_REG_CTRL 0x0000 +#define MPMC_REG_STATUS 0x0004 +#define MPMC_REG_CONF 0x0008 +#define MPMC_REG_DC 0x0020 +#define MPMC_REG_DR 0x0024 +#define MPMC_REG_DRP 0x0030 + +#define MPMC_REG_DC0 0x0100 +#define MPMC_REG_DRC0 0x0104 +#define MPMC_REG_DC1 0x0120 +#define MPMC_REG_DRC1 0x0124 +#define MPMC_REG_DC2 0x0140 +#define MPMC_REG_DRC2 0x0144 +#define MPMC_REG_DC3 0x0160 +#define MPMC_REG_DRC3 0x0164 +#define MPMC_REG_SC0 0x0200 /* for F_CS1_N */ +#define MPMC_REG_SC1 0x0220 /* for F_CS0_N */ +#define MPMC_REG_SC2 0x0240 +#define MPMC_REG_WEN2 0x0244 +#define MPMC_REG_OEN2 0x0248 +#define MPMC_REG_RD2 0x024C +#define MPMC_REG_PG2 0x0250 +#define MPMC_REG_WR2 0x0254 +#define MPMC_REG_TN2 0x0258 +#define MPMC_REG_SC3 0x0260 + +/* Control register bits */ +#define MPMC_CTRL_AM (1 << 1) /* Address Mirror */ +#define MPMC_CTRL_LPM (1 << 2) /* Low Power Mode */ +#define MPMC_CTRL_DWB (1 << 3) /* Drain Write Buffers */ + +/* Status register bits */ +#define MPMC_STATUS_BUSY (1 << 0) /* Busy */ +#define MPMC_STATUS_WBS (1 << 1) /* Write Buffer Status */ +#define MPMC_STATUS_SRA (1 << 2) /* Self-Refresh Acknowledge*/ + +/* Dynamic Control register bits */ +#define MPMC_DC_CE (1 << 0) +#define MPMC_DC_DMC (1 << 1) +#define MPMC_DC_SRR (1 << 2) +#define MPMC_DC_SI_SHIFT 7 +#define MPMC_DC_SI_MASK (3 << 7) +#define MPMC_DC_SI_NORMAL (0 << 7) +#define MPMC_DC_SI_MODE (1 << 7) +#define MPMC_DC_SI_PALL (2 << 7) +#define MPMC_DC_SI_NOP (3 << 7) + +#define SRAM_REG_CONF 0x00 +#define SRAM_REG_WWE 0x04 +#define SRAM_REG_WOE 0x08 +#define SRAM_REG_WRD 0x0C +#define SRAM_REG_WPG 0x10 +#define SRAM_REG_WWR 0x14 +#define SRAM_REG_WTR 0x18 + +/* Dynamic Configuration register bits */ +#define DC_BE (1 << 19) /* buffer enable */ +#define DC_RW_SHIFT 28 /* shift for number of rows */ +#define DC_RW_MASK 0x03 +#define DC_NB_SHIFT 26 /* shift for number of banks */ +#define DC_NB_MASK 0x01 +#define DC_CW_SHIFT 22 /* shift for number of columns */ +#define DC_CW_MASK 0x07 +#define DC_DW_SHIFT 7 /* shift for device width */ +#define DC_DW_MASK 0x03 + +/* Static Configuration register bits */ +#define SC_MW_MASK 0x03 /* memory width mask */ +#define SC_MW_8 0x00 /* 8 bit memory width */ +#define SC_MW_16 0x01 /* 16 bit memory width */ +#define SC_MW_32 0x02 /* 32 bit memory width */ + +#endif /* _MACH_ADM5120_MPMC_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_nand.h new file mode 100644 index 0000000..1e2f3bd --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_nand.h @@ -0,0 +1,89 @@ +/* + * ADM5120 NAND interface definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in NAND interface. + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * NAND interface routines was based on a driver for Linux 2.6.19+ which + * was derived from the driver for Linux 2.4.xx published by Mikrotik for + * their RouterBoard 1xx and 5xx series boards. + * Copyright (C) 2007 David Goodenough + * Copyright (C) 2007 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_NAND_H +#define _MACH_ADM5120_NAND_H + +#include +#include + +#include +#include + +/* NAND control registers */ +#define NAND_REG_DATA 0x0 /* data register */ +#define NAND_REG_SET_CEn 0x1 /* CE# low */ +#define NAND_REG_CLR_CEn 0x2 /* CE# high */ +#define NAND_REG_CLR_CLE 0x3 /* CLE low */ +#define NAND_REG_SET_CLE 0x4 /* CLE high */ +#define NAND_REG_CLR_ALE 0x5 /* ALE low */ +#define NAND_REG_SET_ALE 0x6 /* ALE high */ +#define NAND_REG_SET_SPn 0x7 /* SP# low (use spare area) */ +#define NAND_REG_CLR_SPn 0x8 /* SP# high (do not use spare area) */ +#define NAND_REG_SET_WPn 0x9 /* WP# low */ +#define NAND_REG_CLR_WPn 0xA /* WP# high */ +#define NAND_REG_STATUS 0xB /* Status register */ + +#define ADM5120_NAND_STATUS_READY 0x80 + +#define NAND_READ_REG(r) \ + readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r)) +#define NAND_WRITE_REG(r, v) \ + writeb((v), (void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r)) + +/*-------------------------------------------------------------------------*/ + +static inline void adm5120_nand_enable(void) +{ + SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE); + SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1); +} + +static inline void adm5120_nand_set_wpn(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1); +} + +static inline void adm5120_nand_set_spn(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1); +} + +static inline void adm5120_nand_set_cle(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1); +} + +static inline void adm5120_nand_set_ale(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1); +} + +static inline void adm5120_nand_set_cen(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1); +} + +static inline u8 adm5120_nand_get_status(void) +{ + return NAND_READ_REG(NAND_REG_STATUS); +} + +#endif /* _MACH_ADM5120_NAND_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_platform.h new file mode 100644 index 0000000..ed73b53 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_platform.h @@ -0,0 +1,87 @@ +/* + * ADM5120 specific platform definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ASM_MIPS_MACH_ADM5120_PLATFORM_H +#define _ASM_MIPS_MACH_ADM5120_PLATFORM_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct adm5120_flash_platform_data { + void (*set_vpp)(struct map_info *, int); + void (*switch_bank)(unsigned); + u32 window_size; + unsigned int nr_parts; + struct mtd_partition *parts; +}; + +struct adm5120_switch_platform_data { + /* TODO: not yet implemented */ +}; + +struct adm5120_pci_irq { + u8 slot; + u8 func; + u8 pin; + unsigned irq; +}; + +#define PCIIRQ(s, f, p, i) {.slot = (s), .func = (f), .pin = (p), .irq = (i)} + +#ifdef CONFIG_PCI +extern void adm5120_pci_set_irq_map(unsigned int nr_irqs, + struct adm5120_pci_irq *map) __init; +#else +static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs, + struct adm5120_pci_irq *map) +{ +} +#endif + +extern void adm5120_setup_eth_macs(u8 *mac_base) __init; + +extern struct adm5120_flash_platform_data adm5120_flash0_data; +extern struct adm5120_flash_platform_data adm5120_flash1_data; + +extern void adm5120_add_device_flash(unsigned id) __init; +extern void adm5120_add_device_usb(void) __init; +extern void adm5120_add_device_uart(unsigned id) __init; +extern void adm5120_add_device_nand(struct platform_nand_data *pdata) __init; +extern void adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map) __init; +extern void adm5120_register_gpio_buttons(int id, + unsigned poll_interval, + unsigned nbuttons, + struct gpio_keys_button *buttons); + +#define GPIO_LED_DEF(g, n, t, a) { \ + .name = (n), \ + .default_trigger = (t), \ + .gpio = (g), \ + .active_low = (a) \ +} + +#define GPIO_LED_STD(g, n, t) GPIO_LED_DEF((g), (n), (t), 0) +#define GPIO_LED_INV(g, n, t) GPIO_LED_DEF((g), (n), (t), 1) + +extern void adm5120_add_device_gpio_leds(unsigned num_leds, + struct gpio_led *leds) __init; + +#endif /* _ASM_MIPS_MACH_ADM5120_PLATFORM_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_switch.h new file mode 100644 index 0000000..91adc5b --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_switch.h @@ -0,0 +1,300 @@ +/* + * ADM5120 ethernet switch definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in Ethernet switch. + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_SWITCH_H +#define _MACH_ADM5120_SWITCH_H + +#ifndef BIT +# define BIT(at) (1 << (at)) +#endif +#define BITMASK(len) (BIT(len)-1) + +#define SW_READ_REG(r) __raw_readl( \ + (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) +#define SW_WRITE_REG(r, v) __raw_writel((v), \ + (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) + +/* Switch register offsets */ +#define SWITCH_REG_CODE 0x0000 +#define SWITCH_REG_SOFT_RESET 0x0004 /* Soft Reset */ +#define SWITCH_REG_BOOT_DONE 0x0008 /* Boot Done */ +#define SWITCH_REG_SW_RESET 0x000C /* Switch Reset */ +#define SWITCH_REG_PHY_STATUS 0x0014 /* PHY Status */ +#define SWITCH_REG_MEMCTRL 0x001C /* Memory Control */ +#define SWITCH_REG_CPUP_CONF 0x0024 /* CPU Port Configuration */ +#define SWITCH_REG_PORT_CONF0 0x0028 /* Port Configuration 0 */ +#define SWITCH_REG_PORT_CONF1 0x002C /* Port Configuration 1 */ +#define SWITCH_REG_PORT_CONF2 0x0030 /* Port Configuration 2 */ +#define SWITCH_REG_VLAN_G1 0x0040 /* VLAN group 1 */ +#define SWITCH_REG_VLAN_G2 0x0044 /* VLAN group 2 */ +#define SWITCH_REG_SEND_TRIG 0x0048 /* Send Trigger */ +#define SWITCH_REG_MAC_WT0 0x0058 /* MAC Write Address 0 */ +#define SWITCH_REG_MAC_WT1 0x005C /* MAC Write Address 1 */ +#define SWITCH_REG_BW_CNTL0 0x0060 /* Bandwidth Control 0 */ +#define SWITCH_REG_BW_CNTL1 0x0064 /* Bandwidth Control 1 */ +#define SWITCH_REG_PHY_CNTL0 0x0068 /* PHY Control 0 */ +#define SWITCH_REG_PHY_CNTL1 0x006C /* PHY Control 1 */ +#define SWITCH_REG_PORT_TH 0x0078 /* Port Threshold */ +#define SWITCH_REG_PHY_CNTL2 0x007C /* PHY Control 2 */ +#define SWITCH_REG_PHY_CNTL3 0x0080 /* PHY Control 3 */ +#define SWITCH_REG_PRI_CNTL 0x0084 /* Priority Control */ +#define SWITCH_REG_PHY_CNTL4 0x00A0 /* PHY Control 4 */ +#define SWITCH_REG_EMPTY_CNT 0x00A4 /* Empty Count */ +#define SWITCH_REG_PORT_CNTLS 0x00A8 /* Port Control Select */ +#define SWITCH_REG_PORT_CNTL 0x00AC /* Port Control */ +#define SWITCH_REG_INT_STATUS 0x00B0 /* Interrupt Status */ +#define SWITCH_REG_INT_MASK 0x00B4 /* Interrupt Mask */ +#define SWITCH_REG_GPIO_CONF0 0x00B8 /* GPIO Configuration 0 */ +#define SWITCH_REG_GPIO_CONF2 0x00BC /* GPIO Configuration 1 */ +#define SWITCH_REG_WDOG0 0x00C0 /* Watchdog 0 */ +#define SWITCH_REG_WDOG1 0x00C4 /* Watchdog 1 */ + +#define SWITCH_REG_SHDA 0x00D0 /* Send High Descriptors Address */ +#define SWITCH_REG_SLDA 0x00D4 /* Send Low Descriptors Address */ +#define SWITCH_REG_RHDA 0x00D8 /* Receive High Descriptor Address */ +#define SWITCH_REG_RLDA 0x00DC /* Receive Low Descriptor Address */ +#define SWITCH_REG_SHWA 0x00E0 /* Send High Working Address */ +#define SWITCH_REG_SLWA 0x00E4 /* Send Low Working Address */ +#define SWITCH_REG_RHWA 0x00E8 /* Receive High Working Address */ +#define SWITCH_REG_RLWA 0x00EC /* Receive Low Working Address */ + +#define SWITCH_REG_TIMER_INT 0x00F0 /* Timer */ +#define SWITCH_REG_TIMER 0x00F4 /* Timer Interrupt */ + +#define SWITCH_REG_PORT0_LED 0x0100 +#define SWITCH_REG_PORT1_LED 0x0104 +#define SWITCH_REG_PORT2_LED 0x0108 +#define SWITCH_REG_PORT3_LED 0x010C +#define SWITCH_REG_PORT4_LED 0x0110 + +/* CODE register bits */ +#define CODE_PC_MASK BITMASK(16) /* Product Code */ +#define CODE_REV_SHIFT 16 +#define CODE_REV_MASK BITMASK(4) /* Product Revision */ +#define CODE_CLKS_SHIFT 20 +#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */ +#define CODE_CLKS_175 0 /* 175 MHz */ +#define CODE_CLKS_200 1 /* 200 MHz */ +#define CODE_CLKS_225 2 /* 225 MHz */ +#define CODE_CLKS_250 3 /* 250 MHz */ +#define CODE_NAB BIT(24) /* NAND boot */ +#define CODE_PK_MASK BITMASK(1) /* Package type */ +#define CODE_PK_SHIFT 29 +#define CODE_PK_BGA 0 /* BGA package */ +#define CODE_PK_PQFP 1 /* PQFP package */ + +/* MEMCTRL register bits */ +#define MEMCTRL_SDRS_MASK BITMASK(3) /* SDRAM bank size */ +#define MEMCTRL_SDRS_4M 0x01 +#define MEMCTRL_SDRS_8M 0x02 +#define MEMCTRL_SDRS_16M 0x03 +#define MEMCTRL_SDRS_64M 0x04 +#define MEMCTRL_SDRS_128M 0x05 +#define MEMCTRL_SDR1_ENABLE BIT(5) /* enable SDRAM bank 1 */ + +#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */ +#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */ +#define MEMCTRL_SRS_MASK BITMASK(3) /* SRAM size mask */ +#define MEMCTRL_SRS_DISABLED 0x00 /* Disabled */ +#define MEMCTRL_SRS_512K 0x01 /* 512KB*/ +#define MEMCTRL_SRS_1M 0x02 /* 1MB */ +#define MEMCTRL_SRS_2M 0x03 /* 2MB */ +#define MEMCTRL_SRS_4M 0x04 /* 4MB */ + +/* Port bits used in various registers */ +#define SWITCH_PORT_PHY0 BIT(0) +#define SWITCH_PORT_PHY1 BIT(1) +#define SWITCH_PORT_PHY2 BIT(2) +#define SWITCH_PORT_PHY3 BIT(3) +#define SWITCH_PORT_PHY4 BIT(4) +#define SWITCH_PORT_MII BIT(5) +#define SWITCH_PORT_CPU BIT(6) + +/* Port bit shorthands */ +#define SWITCH_PORTS_PHY 0x1F /* phy ports */ +#define SWITCH_PORTS_NOCPU 0x3F /* physical ports */ +#define SWITCH_PORTS_ALL 0x7F /* all ports */ + +/* CPUP_CONF register bits */ +#define CPUP_CONF_DCPUP BIT(0) /* Disable CPU port */ +#define CPUP_CONF_CRCP BIT(1) /* CRC padding from CPU */ +#define CPUP_CONF_BTM BIT(2) /* Bridge Testing Mode */ +#define CPUP_CONF_DUNP_SHIFT 9 /* Disable Unknown Packets for portX */ +#define CPUP_CONF_DMCP_SHIFT 16 /* Disable Mcast Packets form portX */ +#define CPUP_CONF_DBCP_SHIFT 24 /* Disable Bcast Packets form portX */ + +/* PORT_CONF0 register bits */ +#define PORT_CONF0_DP_SHIFT 0 /* Disable Port */ +#define PORT_CONF0_EMCP_SHIFT 8 /* Enable All MC Packets */ +#define PORT_CONF0_BP_SHIFT 16 /* Enable Back Pressure */ + +/* PORT_CONF1 register bits */ +#define PORT_CONF1_DISL_SHIFT 0 /* Disable Learning */ +#define PORT_CONF1_BS_SHIFT 6 /* Blocking State */ +#define PORT_CONF1_BM_SHIFT 12 /* Blocking Mode */ + +/* SEND_TRIG register bits */ +#define SEND_TRIG_STL BIT(0) /* Send Trigger Low */ +#define SEND_TRIG_STH BIT(1) /* Send Trigger High */ + +/* MAC_WT0 register bits */ +#define MAC_WT0_MAWC BIT(0) /* MAC address write command */ +#define MAC_WT0_MWD_SHIFT 1 +#define MAC_WT0_MWD BIT(1) /* MAC write done */ +#define MAC_WT0_WFB BIT(2) /* Write Filter Bit */ +#define MAC_WT0_WVN_SHIFT 3 /* Write Vlan Number shift */ +#define MAC_WT0_WVE BIT(6) /* Write VLAN enable */ +#define MAC_WT0_WPMN_SHIFT 7 +#define MAC_WT0_WAF_SHIFT 13 /* Write Age Field shift */ +#define MAC_WT0_WAF_EMPTY 0 +#define MAC_WT0_WAF_STATIC 7 /* age: static */ +#define MAC_WT0_MAC0_SHIFT 16 +#define MAC_WT0_MAC1_SHIFT 24 + +/* MAC_WT1 register bits */ +#define MAC_WT1_MAC2_SHIFT 0 +#define MAC_WT1_MAC3_SHIFT 8 +#define MAC_WT1_MAC4_SHIFT 16 +#define MAC_WT1_MAC5_SHIFT 24 + +/* BW_CNTL0/BW_CNTL1 register bits */ +#define BW_CNTL_DISABLE 0x00 +#define BW_CNTL_64K 0x01 +#define BW_CNTL_128K 0x02 +#define BW_CNTL_256K 0x03 +#define BW_CNTL_512K 0x04 +#define BW_CNTL_1M 0x05 +#define BW_CNTL_4M 0x06 +#define BW_CNTL_10M 0x07 + +#define P4TBC_SHIFT 0 +#define P4RBC_SHIFT 4 +#define P5TBC_SHIFT 8 +#define P5RBC_SHIFT 12 + +#define BW_CNTL1_NAND_ENABLE 0x100 + +/* PHY_CNTL0 register bits */ +#define PHY_CNTL0_PHYA_MASK BITMASK(5) +#define PHY_CNTL0_PHYR_MASK BITMASK(5) +#define PHY_CNTL0_PHYR_SHIFT 8 +#define PHY_CNTL0_WC BIT(13) /* Write Command */ +#define PHY_CNTL0_RC BIT(14) /* Read Command */ +#define PHY_CNTL0_WTD_MASK BIT(16) /* Read Command */ +#define PHY_CNTL0_WTD_SHIFT 16 + +/* PHY_CNTL1 register bits */ +#define PHY_CNTL1_WOD BIT(0) /* Write Operation Done */ +#define PHY_CNTL1_ROD BIT(1) /* Read Operation Done */ +#define PHY_CNTL1_RD_MASK BITMASK(16) +#define PHY_CNTL1_RD_SHIFT 16 + +/* PHY_CNTL2 register bits */ +#define PHY_CNTL2_ANE_SHIFT 0 /* Auto Negotiation Enable */ +#define PHY_CNTL2_SC_SHIFT 5 /* Speed Control */ +#define PHY_CNTL2_DC_SHIFT 10 /* Duplex Control */ +#define PHY_CNTL2_FNCV_SHIFT 15 /* Recommended FC Value */ +#define PHY_CNTL2_PHYR_SHIFT 20 /* PHY reset */ +#define PHY_CNTL2_AMDIX_SHIFT 25 /* Auto MDIX enable */ +/* PHY_CNTL2_RMAE is bad in datasheet */ +#define PHY_CNTL2_RMAE BIT(31) /* Recommended MCC Average enable */ + +/* PHY_CNTL3 register bits */ +#define PHY_CNTL3_RNT BIT(10) /* Recommend Normal Threshold */ + +/* PORT_TH register bits */ +#define PORT_TH_PPT_MASK BITMASK(8) /* Per Port Threshold */ +#define PORT_TH_CPUT_SHIFT 8 /* CPU Port Buffer Threshold */ +#define PORT_TH_CPUT_MASK BITMASK(8) +#define PORT_TH_CPUHT_SHIFT 16 /* CPU Hold Threshold */ +#define PORT_TH_CPUHT_MASK BITMASK(8) +#define PORT_TH_CPURT_SHIFT 24 /* CPU Release Threshold */ +#define PORT_TH_CPURT_MASK BITMASK(8) + +/* EMPTY_CNT register bits */ +#define EMPTY_CNT_EBGB_MASK BITMASK(9) /* Empty Blocks in the Global Buffer */ + +/* GPIO_CONF0 register bits */ +#define GPIO_CONF0_MASK BITMASK(8) +#define GPIO_CONF0_IM_SHIFT 0 +#define GPIO_CONF0_IV_SHIFT 8 +#define GPIO_CONF0_OE_SHIFT 16 +#define GPIO_CONF0_OV_SHIFT 24 +#define GPIO_CONF0_IM_MASK (0xFF << GPIO_CONF0_IM_SHIFT) +#define GPIO_CONF0_IV_MASK (0xFF << GPIO_CONF0_IV_SHIFT) +#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT) +#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT) + +/* GPIO_CONF2 register bits */ +#define GPIO_CONF2_CSX0 BIT(4) /* enable CSX0:INTX0 on GPIO 1:2 */ +#define GPIO_CONF2_CSX1 BIT(5) /* enable CSX1:INTX1 on GPIO 3:4 */ +#define GPIO_CONF2_EW BIT(6) /* enable wait state pin for CSX0/1 */ + +/* INT_STATUS/INT_MASK register bits */ +#define SWITCH_INT_SHD BIT(0) /* Send High Done */ +#define SWITCH_INT_SLD BIT(1) /* Send Low Done */ +#define SWITCH_INT_RHD BIT(2) /* Receive High Done */ +#define SWITCH_INT_RLD BIT(3) /* Receive Low Done */ +#define SWITCH_INT_HDF BIT(4) /* High Descriptor Full */ +#define SWITCH_INT_LDF BIT(5) /* Low Descriptor Full */ +#define SWITCH_INT_P0QF BIT(6) /* Port0 Queue Full */ +#define SWITCH_INT_P1QF BIT(7) /* Port1 Queue Full */ +#define SWITCH_INT_P2QF BIT(8) /* Port2 Queue Full */ +#define SWITCH_INT_P3QF BIT(9) /* Port3 Queue Full */ +#define SWITCH_INT_P4QF BIT(10) /* Port4 Queue Full */ +#define SWITCH_INT_P5QF BIT(11) /* Port5 Queue Full */ +#define SWITCH_INT_CPQF BIT(13) /* CPU Queue Full */ +#define SWITCH_INT_GQF BIT(14) /* Global Queue Full */ +#define SWITCH_INT_MD BIT(15) /* Must Drop */ +#define SWITCH_INT_BCS BIT(16) /* BC Storm */ +#define SWITCH_INT_PSC BIT(18) /* Port Status Change */ +#define SWITCH_INT_ID BIT(19) /* Intruder Detected */ +#define SWITCH_INT_W0TE BIT(20) /* Watchdog 0 Timer Expired */ +#define SWITCH_INT_W1TE BIT(21) /* Watchdog 1 Timer Expired */ +#define SWITCH_INT_RDE BIT(22) /* Receive Descriptor Error */ +#define SWITCH_INT_SDE BIT(23) /* Send Descriptor Error */ +#define SWITCH_INT_CPUH BIT(24) /* CPU Hold */ + +/* TIMER_INT register bits */ +#define TIMER_INT_TOS BIT(0) /* time-out status */ +#define TIMER_INT_TOM BIT(16) /* mask time-out interrupt */ + +/* TIMER register bits */ +#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */ +#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */ +#define TIMER_TE BIT(16) /* timer enable bit */ + +/* PORTx_LED register bits */ +#define LED_MODE_MASK BITMASK(4) +#define LED_MODE_INPUT 0 +#define LED_MODE_FLASH 1 +#define LED_MODE_OUT_HIGH 2 +#define LED_MODE_OUT_LOW 3 +#define LED_MODE_LINK 4 +#define LED_MODE_SPEED 5 +#define LED_MODE_DUPLEX 6 +#define LED_MODE_ACT 7 +#define LED_MODE_COLL 8 +#define LED_MODE_LINK_ACT 9 +#define LED_MODE_DUPLEX_COLL 10 +#define LED_MODE_10M_ACT 11 +#define LED_MODE_100M_ACT 12 +#define LED0_MODE_SHIFT 0 /* LED0 mode shift */ +#define LED1_MODE_SHIFT 4 /* LED1 mode shift */ +#define LED2_MODE_SHIFT 8 /* LED2 mode shift */ +#define LED0_IV_SHIFT 12 /* LED0 input value shift */ +#define LED1_IV_SHIFT 13 /* LED1 input value shift */ +#define LED2_IV_SHIFT 14 /* LED2 input value shift */ + +#endif /* _MACH_ADM5120_SWITCH_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_uart.h new file mode 100644 index 0000000..81d3067 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_uart.h @@ -0,0 +1,64 @@ +/* + * ADM5120 UART definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in UARTs. + * + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_UART_H +#define _MACH_ADM5120_UART_H + +#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1) + +#define UART_REG_DATA 0x00 +#define UART_REG_RSR 0x04 +#define UART_REG_ECR UART_REG_RSR +#define UART_REG_LCRH 0x08 +#define UART_REG_LCRM 0x0C +#define UART_REG_LCRL 0x10 +#define UART_REG_CTRL 0x14 +#define UART_REG_FLAG 0x18 + +/* Receive Status Register bits */ +#define UART_RSR_FE (1 << 0) +#define UART_RSR_PE (1 << 1) +#define UART_RSR_BE (1 << 2) +#define UART_RSR_OE (1 << 3) +#define UART_RSR_ERR (UART_RSR_FE | UART_RSR_PE | UART_RSR_BE) + +#define UART_ECR_ALL 0xFF + +/* Line Control High register bits */ +#define UART_LCRH_BRK (1 << 0) /* send break */ +#define UART_LCRH_PEN (1 << 1) /* parity enable */ +#define UART_LCRH_EPS (1 << 2) /* even parity select */ +#define UART_LCRH_STP1 (0 << 3) /* one stop bits select */ +#define UART_LCRH_STP2 (1 << 3) /* two stop bits select */ +#define UART_LCRH_FEN (1 << 4) /* FIFO enable */ + +#define UART_LCRH_WLEN5 (0 << 5) +#define UART_LCRH_WLEN6 (1 << 5) +#define UART_LCRH_WLEN7 (2 << 5) +#define UART_LCRH_WLEN8 (3 << 5) + +/* Control register bits */ +#define UART_CTRL_EN (1 << 0) + +/* Flag register bits */ +#define UART_FLAG_CTS (1 << 0) +#define UART_FLAG_DSR (1 << 1) +#define UART_FLAG_DCD (1 << 2) +#define UART_FLAG_BUSY (1 << 3) +#define UART_FLAG_RXFE (1 << 4) +#define UART_FLAG_TXFF (1 << 5) +#define UART_FLAG_RXFF (1 << 6) +#define UART_FLAG_TXFE (1 << 7) + +#endif /* _MACH_ADM5120_UART_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/asm/sizes.h new file mode 100644 index 0000000..503843d --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/asm/sizes.h @@ -0,0 +1,56 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* DO NOT EDIT!! - this file automatically generated + * from .s file by awk -f s2h.awk + */ +/* Size definitions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_16 0x00000010 +#define SZ_256 0x00000100 +#define SZ_512 0x00000200 + +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif + +/* END */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h new file mode 100644 index 0000000..c6310cc --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h @@ -0,0 +1,71 @@ +/* + * ADM5120 specific CPU feature overrides + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H + +/* + * The ADM5120 SOC has a built-in MIPS 4Kc core. + */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 +/* #define cpu_has_vce ? */ +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +#define cpu_has_prefetch 1 +/* #define cpu_has_mcheck ? */ +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +/* #define cpu_has_pindexed_dcache ? */ + +/* #define cpu_icache_snoops_remote_store ? */ + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +/* #define cpu_has_nofpuex ? */ +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +/* #define cpu_has_inclusive_pcaches ? */ + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 + +#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/gpio.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/gpio.h new file mode 100644 index 0000000..7ba7efc --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/gpio.h @@ -0,0 +1,115 @@ +/* + * ADM5120 GPIO wrappers for arch-neutral GPIO calls + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ASM_MIPS_MACH_ADM5120_GPIO_H +#define _ASM_MIPS_MACH_ADM5120_GPIO_H + +#define ARCH_NR_GPIOS 64 + +#include + +#include + +#define ADM5120_GPIO_PIN0 0 +#define ADM5120_GPIO_PIN1 1 +#define ADM5120_GPIO_PIN2 2 +#define ADM5120_GPIO_PIN3 3 +#define ADM5120_GPIO_PIN4 4 +#define ADM5120_GPIO_PIN5 5 +#define ADM5120_GPIO_PIN6 6 +#define ADM5120_GPIO_PIN7 7 +#define ADM5120_GPIO_P0L0 8 +#define ADM5120_GPIO_P0L1 9 +#define ADM5120_GPIO_P0L2 10 +#define ADM5120_GPIO_P1L0 11 +#define ADM5120_GPIO_P1L1 12 +#define ADM5120_GPIO_P1L2 13 +#define ADM5120_GPIO_P2L0 14 +#define ADM5120_GPIO_P2L1 15 +#define ADM5120_GPIO_P2L2 16 +#define ADM5120_GPIO_P3L0 17 +#define ADM5120_GPIO_P3L1 18 +#define ADM5120_GPIO_P3L2 19 +#define ADM5120_GPIO_P4L0 20 +#define ADM5120_GPIO_P4L1 21 +#define ADM5120_GPIO_P4L2 22 +#define ADM5120_GPIO_MAX 22 +#define ADM5120_GPIO_COUNT ADM5120_GPIO_MAX+1 + +#define ADM5120_GPIO_LOW 0 +#define ADM5120_GPIO_HIGH 1 + +#define ADM5120_GPIO_SWITCH 0x10 +#define ADM5120_GPIO_FLASH (ADM5120_GPIO_SWITCH | LED_MODE_FLASH) +#define ADM5120_GPIO_LINK (ADM5120_GPIO_SWITCH | LED_MODE_LINK) +#define ADM5120_GPIO_SPEED (ADM5120_GPIO_SWITCH | LED_MODE_SPEED) +#define ADM5120_GPIO_DUPLEX (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX) +#define ADM5120_GPIO_ACT (ADM5120_GPIO_SWITCH | LED_MODE_ACT) +#define ADM5120_GPIO_COLL (ADM5120_GPIO_SWITCH | LED_MODE_COLL) +#define ADM5120_GPIO_LINK_ACT (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT) +#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL) +#define ADM5120_GPIO_10M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT) +#define ADM5120_GPIO_100M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT) + +extern int __adm5120_gpio0_get_value(unsigned gpio); +extern void __adm5120_gpio0_set_value(unsigned gpio, int value); +extern int __adm5120_gpio1_get_value(unsigned gpio); +extern void __adm5120_gpio1_set_value(unsigned gpio, int value); +extern int adm5120_gpio_to_irq(unsigned gpio); +extern int adm5120_irq_to_gpio(unsigned irq); + +static inline int gpio_get_value(unsigned gpio) +{ + int ret; + + switch (gpio) { + case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7: + ret = __adm5120_gpio0_get_value(gpio); + break; + case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2: + ret = __adm5120_gpio1_get_value(gpio - ADM5120_GPIO_P0L0); + break; + default: + ret = __gpio_get_value(gpio); + break; + } + + return ret; +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + switch (gpio) { + case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7: + __adm5120_gpio0_set_value(gpio, value); + break; + case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2: + __adm5120_gpio1_set_value(gpio - ADM5120_GPIO_P0L0, value); + break; + default: + __gpio_set_value(gpio, value); + break; + } +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return adm5120_gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned irq) +{ + return adm5120_irq_to_gpio(irq); +} + +#define gpio_cansleep __gpio_cansleep + +#endif /* _ASM_MIPS_MACH_ADM5120_GPIO_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/irq.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/irq.h new file mode 100644 index 0000000..b0350c8 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/irq.h @@ -0,0 +1,43 @@ +/* + * ADM5120 specific IRQ numbers + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef _ASM_MIPS_MACH_ADM5120_IRQ_H +#define _ASM_MIPS_MACH_ADM5120_IRQ_H + +#define MIPS_CPU_IRQ_BASE 0 +#define NR_IRQS 24 + +#include_next + +#include + +#define NO_IRQ (-1) + +#define MIPS_CPU_IRQ_COUNT 8 +#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x)) + +#define ADM5120_INTC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_IRQ_COUNT) +#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x)) + +#define ADM5120_IRQ_INTC MIPS_CPU_IRQ(2) +#define ADM5120_IRQ_COUNTER MIPS_CPU_IRQ(7) + +#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER) +#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0) +#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1) +#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC) +#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2) +#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4) +#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0) +#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1) +#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2) +#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH) + +#endif /* _ASM_MIPS_MACH_ADM5120_IRQ_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/admboot.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/admboot.h new file mode 100644 index 0000000..fa42bf7 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/admboot.h @@ -0,0 +1,17 @@ +/* + * ADMBoot specific definitions + * + * Copyright (C) 2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ADMBOOT_H +#define _ADMBOOT_H + +extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init; + +#endif /* _ADMBOOT_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/cfe.h new file mode 100644 index 0000000..0cb3eee --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/cfe.h @@ -0,0 +1,18 @@ +/* + * Broadcom's CFE definitions + * + * Copyright (C) 2006-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _PROM_CFE_H_ +#define _PROM_CFE_H_ + +extern int cfe_present(void) __init; +extern char *cfe_getenv(char *); + +#endif /*_PROM_CFE_H_*/ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/generic.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/generic.h new file mode 100644 index 0000000..778df24 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/generic.h @@ -0,0 +1,18 @@ +/* + * Generic prom definitions + * + * Copyright (C) 2006-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _PROM_GENERIC_H_ +#define _PROM_GENERIC_H_ + +extern int generic_prom_present(void) __init; +extern char *generic_prom_getenv(char *); + +#endif /*_PROM_GENERIC_H_*/ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/myloader.h new file mode 100644 index 0000000..ea8db81 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/myloader.h @@ -0,0 +1,179 @@ +/* + * Compex's MyLoader specific definitions + * + * Copyright (C) 2006-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MYLOADER_H_ +#define _MYLOADER_H_ + +/* + * Firmware file format: + * + *
+ * [] + * ... + * [] + * + * [] + * ... + * [] + * + * + */ + +/* Myloader specific magic numbers */ +#define MYLO_MAGIC_FIRMWARE 0x4C594D00 +#define MYLO_MAGIC_20021103 0x20021103 +#define MYLO_MAGIC_20021107 0x20021107 + +#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107 +#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103 +#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103 + +/* + * Addresses of the data structures provided by MyLoader + */ +#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */ +#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */ +#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */ +#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */ + +/* Vendor ID's (seems to be same as the PCI vendor ID's) */ +#define VENID_COMPEX 0x11F6 + +/* Devices based on the ADM5120 */ +#define DEVID_COMPEX_NP27G 0x0078 +#define DEVID_COMPEX_NP28G 0x044C +#define DEVID_COMPEX_NP28GHS 0x044E +#define DEVID_COMPEX_WP54Gv1C 0x0514 +#define DEVID_COMPEX_WP54G 0x0515 +#define DEVID_COMPEX_WP54AG 0x0546 +#define DEVID_COMPEX_WPP54AG 0x0550 +#define DEVID_COMPEX_WPP54G 0x0555 + +/* Devices based on the IXP422 */ +#define DEVID_COMPEX_WP18 0x047E +#define DEVID_COMPEX_NP18A 0x0489 + +/* Other devices */ +#define DEVID_COMPEX_NP26G8M 0x03E8 +#define DEVID_COMPEX_NP26G16M 0x03E9 + +struct mylo_fw_header { + uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */ + uint32_t crc; /* CRC of the whole firmware */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint16_t vid; /* vendor ID */ + uint16_t did; /* device ID */ + uint16_t svid; /* sub vendor ID */ + uint16_t sdid; /* sub device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; /* FIXME: firmware version high? */ + uint32_t fwlo; /* FIXME: firmware version low? */ + uint32_t flags; /* firmware flags */ +}; + +#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */ +#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */ + +struct mylo_fw_blockdesc { + uint32_t type; /* block type */ + uint32_t addr; /* relative address to flash start */ + uint32_t dlen; /* size of block data in bytes */ + uint32_t blen; /* total size of block in bytes */ +}; + +#define FW_DESC_TYPE_UNUSED 0 +#define FW_DESC_TYPE_USED 1 + +struct mylo_partition { + uint16_t flags; /* partition flags */ + uint16_t type; /* type of the partition */ + uint32_t addr; /* relative address of the partition from the + flash start */ + uint32_t size; /* size of the partition in bytes */ + uint32_t param; /* if this is the active partition, the + MyLoader load code to this address */ +}; + +#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, + * MyLoader loads firmware from here */ +#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ +#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ +#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM + * before decompression */ +#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ + +#define PARTITION_TYPE_FREE 0 +#define PARTITION_TYPE_USED 1 + +#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the + partition table */ + +struct mylo_partition_table { + uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint32_t res2; /* unknown/unused */ + struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; +}; + +struct mylo_partition_header { + uint32_t len; /* length of the partition data */ + uint32_t crc; /* CRC value of the partition data */ +}; + +struct mylo_system_params { + uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t mylo_ver; + uint16_t vid; /* Vendor ID */ + uint16_t did; /* Device ID */ + uint16_t svid; /* Sub Vendor ID */ + uint16_t sdid; /* Sub Device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; + uint32_t fwlo; + uint32_t tftp_addr; + uint32_t prog_start; + uint32_t flash_size; /* Size of boot FLASH in bytes */ + uint32_t dram_size; /* Size of onboard RAM in bytes */ +}; + + +struct mylo_eth_addr { + uint8_t mac[6]; + uint8_t csum[2]; +}; + +#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address + in the board parameters */ + +struct mylo_board_params { + uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t res2; + struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; +}; + +struct myloader_info { + u32 vid; + u32 did; + u32 svid; + u32 sdid; + uint8_t macs[MYLO_ETHADDR_COUNT][6]; +}; + +extern struct myloader_info myloader_info; +extern int myloader_present(void) __init; + +#endif /* _MYLOADER_H_*/ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/routerboot.h new file mode 100644 index 0000000..91ac05a --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/routerboot.h @@ -0,0 +1,36 @@ +/* + * Mikrotik's RouterBOOT definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _PROM_ROUTERBOOT_H_ +#define _PROM_ROUTERBOOT_H_ + +struct rb_bios_settings { + u32 hs_offs; /* hard settings offset */ + u32 hs_size; /* hard settings size */ + u32 fw_offs; /* firmware offset */ + u32 ss_offs; /* soft settings offset */ + u32 ss_size; /* soft settings size */ +}; + +struct rb_hard_settings { + char *name; /* board name */ + char *bios_ver; /* BIOS version */ + u32 mem_size; /* memory size in bytes */ + u32 mac_count; /* number of mac addresses */ + u8 *mac_base; /* mac address base */ +}; + +extern int routerboot_present(void) __init; +extern char *routerboot_get_boardname(void); + +extern struct rb_hard_settings rb_hs; + +#endif /* _PROM_ROUTERBOOT_H_ */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/zynos.h new file mode 100644 index 0000000..d1e3e5b --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/zynos.h @@ -0,0 +1,86 @@ +/* + * ZyNOS (ZyXEL's Networking OS) definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ZYNOS_H +#define _ZYNOS_H + +#define ZYNOS_NAME_LEN 32 +#define ZYNOS_FEAT_BYTES 22 +#define ZYNOS_MAC_LEN 6 + +struct zynos_board_info { + unsigned char vendor[ZYNOS_NAME_LEN]; + unsigned char product[ZYNOS_NAME_LEN]; + u32 bootext_addr; + u32 res0; + u16 board_id; + u8 res1[6]; + u8 feat_other[ZYNOS_FEAT_BYTES]; + u8 feat_main; + u8 res2; + u8 mac[ZYNOS_MAC_LEN]; + u8 country; + u8 dbgflag; +} __attribute__ ((packed)); + +/* + * Vendor IDs + */ +#define ZYNOS_VENDOR_ID_ZYXEL 0 +#define ZYNOS_VENDOR_ID_NETGEAR 1 +#define ZYNOS_VENDOR_ID_DLINK 2 +#define ZYNOS_VENDOR_ID_OTHER 3 +#define ZYNOS_VENDOR_ID_LUCENT 4 + +/* + * Vendor names + */ +#define ZYNOS_VENDOR_DLINK "D-Link" +#define ZYNOS_VENDOR_LUCENT "LUCENT" +#define ZYNOS_VENDOR_NETGEAR "NetGear" +#define ZYNOS_VENDOR_ZYXEL "ZyXEL" + +/* + * Board IDs (big-endian) + */ +#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */ +#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */ +#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */ +#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */ +#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */ +#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */ +#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */ +#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */ +#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */ +#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */ +#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */ +#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */ +#define ZYNOS_BOARD_P334WT_ALT 0x9F02 /* Prestige 334WT alternative*/ +#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */ +#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */ +#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */ + +/* + * Some magic numbers (big-endian) + */ +#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */ +#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */ + +struct bootbase_info { + u16 vendor_id; + u16 board_id; + u8 mac[6]; +}; + +extern struct bootbase_info bootbase_info; +extern int bootbase_present(void) __init; + +#endif /* _ZYNOS_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/war.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/war.h new file mode 100644 index 0000000..87c35f3 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H +#define __ASM_MIPS_MACH_ADM5120_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */ -- cgit v1.2.3