From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001 From: James <> Date: Wed, 4 Nov 2015 11:49:21 +0000 Subject: trunk-47381 --- .../patches/0005-add-nanonote-lcd-support.patch | 847 +++++++++++++++++++++ 1 file changed, 847 insertions(+) create mode 100644 package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch (limited to 'package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch') diff --git a/package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch b/package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch new file mode 100644 index 0000000..2c550f7 --- /dev/null +++ b/package/boot/uboot-xburst/patches/0005-add-nanonote-lcd-support.patch @@ -0,0 +1,847 @@ +From ca8c5216cfd3ad3fda9867ed2d157ae5a209834b Mon Sep 17 00:00:00 2001 +From: Xiangfu +Date: Wed, 10 Oct 2012 22:05:27 +0800 +Subject: [PATCH 5/6] add nanonote lcd support + +--- + arch/mips/include/asm/global_data.h | 1 + + arch/mips/include/asm/jz4740.h | 90 ++++++++ + arch/mips/lib/board.c | 6 + + common/lcd.c | 9 +- + drivers/video/Makefile | 1 + + drivers/video/nanonote_gpm940b0.c | 400 +++++++++++++++++++++++++++++++++++ + drivers/video/nanonote_gpm940b0.h | 135 ++++++++++++ + include/configs/qi_lb60.h | 7 + + include/lcd.h | 52 ++++- + 9 files changed, 697 insertions(+), 4 deletions(-) + create mode 100644 drivers/video/nanonote_gpm940b0.c + create mode 100644 drivers/video/nanonote_gpm940b0.h + +diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h +index cd03d7e..7cec2de 100644 +--- a/arch/mips/include/asm/global_data.h ++++ b/arch/mips/include/asm/global_data.h +@@ -44,6 +44,7 @@ typedef struct global_data { + unsigned long per_clk; /* Peripheral bus clock */ + unsigned long mem_clk; /* Memory bus clock */ + unsigned long dev_clk; /* Device clock */ ++ unsigned long fb_base; /* base address of framebuffer */ + /* "static data" needed by most of timer.c */ + unsigned long tbl; + unsigned long lastinc; +diff --git a/arch/mips/include/asm/jz4740.h b/arch/mips/include/asm/jz4740.h +index 68287fb..13724a2 100644 +--- a/arch/mips/include/asm/jz4740.h ++++ b/arch/mips/include/asm/jz4740.h +@@ -1312,5 +1312,95 @@ do { \ + while (REG_MSC_STAT & MSC_STAT_IS_RESETTING); \ + } while (0) + ++/************************************************************************* ++ * LCD (LCD Controller) ++ *************************************************************************/ ++#define REG32(addr) *((volatile u32 *)(addr)) ++ ++#define CPM_BASE 0xB0000000 ++#define CPM_CPCCR (CPM_BASE+0x00) ++#define REG_CPM_CPCCR REG32(CPM_CPCCR) ++ ++#define LCD_BASE 0xB3050000 ++#define LCD_CFG (LCD_BASE + 0x00) /* LCD Configure Register */ ++#define LCD_VSYNC (LCD_BASE + 0x04) /* Vertical Synchronize Register */ ++#define LCD_HSYNC (LCD_BASE + 0x08) /* Horizontal Synchronize Register */ ++#define LCD_VAT (LCD_BASE + 0x0c) /* Virtual Area Setting Register */ ++#define LCD_DAH (LCD_BASE + 0x10) /* Display Area Horizontal Start/End Point */ ++#define LCD_DAV (LCD_BASE + 0x14) /* Display Area Vertical Start/End Point */ ++#define LCD_PS (LCD_BASE + 0x18) /* PS Signal Setting */ ++#define LCD_CLS (LCD_BASE + 0x1c) /* CLS Signal Setting */ ++#define LCD_SPL (LCD_BASE + 0x20) /* SPL Signal Setting */ ++#define LCD_REV (LCD_BASE + 0x24) /* REV Signal Setting */ ++#define LCD_CTRL (LCD_BASE + 0x30) /* LCD Control Register */ ++#define LCD_STATE (LCD_BASE + 0x34) /* LCD Status Register */ ++#define LCD_IID (LCD_BASE + 0x38) /* Interrupt ID Register */ ++#define LCD_DA0 (LCD_BASE + 0x40) /* Descriptor Address Register 0 */ ++#define LCD_SA0 (LCD_BASE + 0x44) /* Source Address Register 0 */ ++#define LCD_FID0 (LCD_BASE + 0x48) /* Frame ID Register 0 */ ++#define LCD_CMD0 (LCD_BASE + 0x4c) /* DMA Command Register 0 */ ++#define LCD_DA1 (LCD_BASE + 0x50) /* Descriptor Address Register 1 */ ++#define LCD_SA1 (LCD_BASE + 0x54) /* Source Address Register 1 */ ++#define LCD_FID1 (LCD_BASE + 0x58) /* Frame ID Register 1 */ ++#define LCD_CMD1 (LCD_BASE + 0x5c) /* DMA Command Register 1 */ ++ ++#define REG_LCD_CFG REG32(LCD_CFG) ++#define REG_LCD_VSYNC REG32(LCD_VSYNC) ++#define REG_LCD_HSYNC REG32(LCD_HSYNC) ++#define REG_LCD_VAT REG32(LCD_VAT) ++#define REG_LCD_DAH REG32(LCD_DAH) ++#define REG_LCD_DAV REG32(LCD_DAV) ++#define REG_LCD_PS REG32(LCD_PS) ++#define REG_LCD_CLS REG32(LCD_CLS) ++#define REG_LCD_SPL REG32(LCD_SPL) ++#define REG_LCD_REV REG32(LCD_REV) ++#define REG_LCD_CTRL REG32(LCD_CTRL) ++#define REG_LCD_STATE REG32(LCD_STATE) ++#define REG_LCD_IID REG32(LCD_IID) ++#define REG_LCD_DA0 REG32(LCD_DA0) ++#define REG_LCD_SA0 REG32(LCD_SA0) ++#define REG_LCD_FID0 REG32(LCD_FID0) ++#define REG_LCD_CMD0 REG32(LCD_CMD0) ++#define REG_LCD_DA1 REG32(LCD_DA1) ++#define REG_LCD_SA1 REG32(LCD_SA1) ++#define REG_LCD_FID1 REG32(LCD_FID1) ++#define REG_LCD_CMD1 REG32(LCD_CMD1) ++ ++#define LCD_CTRL_BPP_BIT 0 /* Bits Per Pixel */ ++#define LCD_CTRL_BPP_MASK (0x07 << LCD_CTRL_BPP_BIT) ++ #define LCD_CTRL_BPP_1 (0 << LCD_CTRL_BPP_BIT) /* 1 bpp */ ++ #define LCD_CTRL_BPP_2 (1 << LCD_CTRL_BPP_BIT) /* 2 bpp */ ++ #define LCD_CTRL_BPP_4 (2 << LCD_CTRL_BPP_BIT) /* 4 bpp */ ++ #define LCD_CTRL_BPP_8 (3 << LCD_CTRL_BPP_BIT) /* 8 bpp */ ++ #define LCD_CTRL_BPP_16 (4 << LCD_CTRL_BPP_BIT) /* 15/16 bpp */ ++ #define LCD_CTRL_BPP_18_24 (5 << LCD_CTRL_BPP_BIT) /* 18/24/32 bpp */ ++ ++#define LCD_CTRL_BST_BIT 28 /* Burst Length Selection */ ++#define LCD_CTRL_BST_MASK (0x03 << LCD_CTRL_BST_BIT) ++ #define LCD_CTRL_BST_4 (0 << LCD_CTRL_BST_BIT) /* 4-word */ ++ #define LCD_CTRL_BST_8 (1 << LCD_CTRL_BST_BIT) /* 8-word */ ++ #define LCD_CTRL_BST_16 (2 << LCD_CTRL_BST_BIT) /* 16-word */ ++#define LCD_CTRL_RGB565 (0 << 27) /* RGB565 mode */ ++#define LCD_CTRL_RGB555 (1 << 27) /* RGB555 mode */ ++#define LCD_CTRL_OFUP (1 << 26) /* Output FIFO underrun protection enable */ ++#define LCD_CTRL_FRC_BIT 24 /* STN FRC Algorithm Selection */ ++#define LCD_CTRL_FRC_MASK (0x03 << LCD_CTRL_FRC_BIT) ++ #define LCD_CTRL_FRC_16 (0 << LCD_CTRL_FRC_BIT) /* 16 grayscale */ ++ #define LCD_CTRL_FRC_4 (1 << LCD_CTRL_FRC_BIT) /* 4 grayscale */ ++ #define LCD_CTRL_FRC_2 (2 << LCD_CTRL_FRC_BIT) /* 2 grayscale */ ++ ++#define CPM_LPCDR (CPM_BASE+0x64) ++#define CPM_CLKGR (CPM_BASE+0x20) ++#define REG_CPM_LPCDR REG32(CPM_LPCDR) ++#define REG_CPM_CLKGR REG32(CPM_CLKGR) ++ ++#define __cpm_start_tcu() (REG_CPM_CLKGR &= ~CPM_CLKGR_TCU) ++#define __cpm_stop_lcd() (REG_CPM_CLKGR |= CPM_CLKGR_LCD) ++#define __cpm_set_pixdiv(v) \ ++ (REG_CPM_LPCDR = (REG_CPM_LPCDR & ~CPM_LPCDR_PIXDIV_MASK) | ((v) << (CPM_LPCDR_PIXDIV_BIT))) ++#define __cpm_set_ldiv(v) \ ++ (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_LDIV_MASK) | ((v) << (CPM_CPCCR_LDIV_BIT))) ++#define __cpm_start_lcd() (REG_CPM_CLKGR &= ~CPM_CLKGR_LCD) ++ + #endif /* !__ASSEMBLY__ */ + #endif /* __JZ4740_H__ */ +diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c +index b14b33e..c2e64d9 100644 +--- a/arch/mips/lib/board.c ++++ b/arch/mips/lib/board.c +@@ -172,6 +172,12 @@ void board_init_f(ulong bootflag) + addr &= ~(4096 - 1); + debug("Top of RAM usable for U-Boot at: %08lx\n", addr); + ++#ifdef CONFIG_LCD ++ /* reserve memory for LCD display (always full pages) */ ++ addr = lcd_setmem (addr); ++ gd->fb_base = addr; ++#endif /* CONFIG_LCD */ ++ + /* Reserve memory for U-Boot code, data & bss + * round down to next 16 kB limit + */ +diff --git a/common/lcd.c b/common/lcd.c +index b6be800..af1281a 100644 +--- a/common/lcd.c ++++ b/common/lcd.c +@@ -263,6 +263,13 @@ static void lcd_drawchars(ushort x, ushort y, uchar *str, int count) + lcd_color_fg : lcd_color_bg; + bits <<= 1; + } ++#elif LCD_BPP == LCD_COLOR32 ++ uint *m = (uint *)d; ++ for (c=0; c<32; ++c) { ++ *m++ = (bits & 0x80) ? ++ lcd_color_fg : lcd_color_bg; ++ bits <<= 1; ++ } + #endif + } + #if LCD_BPP == LCD_MONOCHROME +@@ -509,7 +516,7 @@ static inline ushort *configuration_get_cmap(void) + return (ushort *)&(cp->lcd_cmap[255 * sizeof(ushort)]); + #elif defined(CONFIG_ATMEL_LCD) + return (ushort *)(panel_info.mmio + ATMEL_LCDC_LUT(0)); +-#elif !defined(CONFIG_ATMEL_HLCD) && !defined(CONFIG_EXYNOS_FB) ++#elif !defined(CONFIG_ATMEL_HLCD) && !defined(CONFIG_EXYNOS_FB) && !defined(CONFIG_VIDEO_GPM940B0) + return panel_info.cmap; + #else + #if defined(CONFIG_LCD_LOGO) +diff --git a/drivers/video/Makefile b/drivers/video/Makefile +index ebb6da8..03625bc 100644 +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -50,6 +50,7 @@ COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o + COBJS-$(CONFIG_VIDEO_SM501) += sm501.o + COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o + COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o ++COBJS-$(CONFIG_VIDEO_GPM940B0) += nanonote_gpm940b0.o + + COBJS := $(sort $(COBJS-y)) + SRCS := $(COBJS:.o=.c) +diff --git a/drivers/video/nanonote_gpm940b0.c b/drivers/video/nanonote_gpm940b0.c +new file mode 100644 +index 0000000..11efb72 +--- /dev/null ++++ b/drivers/video/nanonote_gpm940b0.c +@@ -0,0 +1,400 @@ ++/* ++ * JzRISC lcd controller ++ * ++ * Xiangfu Liu ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++ ++#include /* virt_to_phys() */ ++#include ++ ++#include "nanonote_gpm940b0.h" ++ ++#define align2(n) (n)=((((n)+1)>>1)<<1) ++#define align4(n) (n)=((((n)+3)>>2)<<2) ++#define align8(n) (n)=((((n)+7)>>3)<<3) ++ ++struct jzfb_info { ++ unsigned int cfg; /* panel mode and pin usage etc. */ ++ unsigned int w; ++ unsigned int h; ++ unsigned int bpp; /* bit per pixel */ ++ unsigned int fclk; /* frame clk */ ++ unsigned int hsw; /* hsync width, in pclk */ ++ unsigned int vsw; /* vsync width, in line count */ ++ unsigned int elw; /* end of line, in pclk */ ++ unsigned int blw; /* begin of line, in pclk */ ++ unsigned int efw; /* end of frame, in line count */ ++ unsigned int bfw; /* begin of frame, in line count */ ++}; ++ ++static struct jzfb_info jzfb = { ++ MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N, ++ 320, 240, 32, 70, 1, 1, 273, 140, 1, 20 ++}; ++ ++vidinfo_t panel_info = { ++ 320, 240, LCD_BPP, ++}; ++ ++void *lcd_base; ++void *lcd_console_address; ++int lcd_line_length; ++int lcd_color_fg; ++int lcd_color_bg; ++short console_col; ++short console_row; ++ ++static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid) ++{ ++ u_long palette_mem_size; ++ struct jz_fb_info *fbi = &vid->jz_fb; ++ int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8; ++ ++ fbi->screen = (u_long)lcdbase; ++ fbi->palette_size = 256; ++ palette_mem_size = fbi->palette_size * sizeof(u16); ++ ++ debug("jz_lcd.c palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); ++ /* locate palette and descs at end of page following fb */ ++ fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size; ++ ++ return 0; ++} ++ ++static void jz_lcd_desc_init(vidinfo_t *vid) ++{ ++ struct jz_fb_info * fbi; ++ fbi = &vid->jz_fb; ++ fbi->dmadesc_fblow = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 3*16); ++ fbi->dmadesc_fbhigh = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 2*16); ++ fbi->dmadesc_palette = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 1*16); ++ ++ #define BYTES_PER_PANEL (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8) ++ ++ /* populate descriptors */ ++ fbi->dmadesc_fblow->fdadr = virt_to_phys(fbi->dmadesc_fblow); ++ fbi->dmadesc_fblow->fsadr = virt_to_phys((void *)(fbi->screen + BYTES_PER_PANEL)); ++ fbi->dmadesc_fblow->fidr = 0; ++ fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL / 4 ; ++ ++ fbi->fdadr1 = virt_to_phys(fbi->dmadesc_fblow); /* only used in dual-panel mode */ ++ ++ fbi->dmadesc_fbhigh->fsadr = virt_to_phys((void *)fbi->screen); ++ fbi->dmadesc_fbhigh->fidr = 0; ++ fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL / 4; /* length in word */ ++ ++ fbi->dmadesc_palette->fsadr = virt_to_phys((void *)fbi->palette); ++ fbi->dmadesc_palette->fidr = 0; ++ fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2)/4 | (1<<28); ++ ++ if(NBITS(vid->vl_bpix) < 12) { ++ /* assume any mode with <12 bpp is palette driven */ ++ fbi->dmadesc_palette->fdadr = virt_to_phys(fbi->dmadesc_fbhigh); ++ fbi->dmadesc_fbhigh->fdadr = virt_to_phys(fbi->dmadesc_palette); ++ /* flips back and forth between pal and fbhigh */ ++ fbi->fdadr0 = virt_to_phys(fbi->dmadesc_palette); ++ } else { ++ /* palette shouldn't be loaded in true-color mode */ ++ fbi->dmadesc_fbhigh->fdadr = virt_to_phys((void *)fbi->dmadesc_fbhigh); ++ fbi->fdadr0 = virt_to_phys(fbi->dmadesc_fbhigh); /* no pal just fbhigh */ ++ } ++} ++ ++static int jz_lcd_hw_init(vidinfo_t *vid) ++{ ++ struct jz_fb_info *fbi = &vid->jz_fb; ++ unsigned int val = 0; ++ unsigned int pclk; ++ unsigned int stnH; ++ int pll_div; ++ ++ /* Setting Control register */ ++ switch (jzfb.bpp) { ++ case 1: ++ val |= LCD_CTRL_BPP_1; ++ break; ++ case 2: ++ val |= LCD_CTRL_BPP_2; ++ break; ++ case 4: ++ val |= LCD_CTRL_BPP_4; ++ break; ++ case 8: ++ val |= LCD_CTRL_BPP_8; ++ break; ++ case 15: ++ val |= LCD_CTRL_RGB555; ++ case 16: ++ val |= LCD_CTRL_BPP_16; ++ break; ++ case 17 ... 32: ++ val |= LCD_CTRL_BPP_18_24; /* target is 4bytes/pixel */ ++ break; ++ ++ default: ++ printf("jz_lcd.c The BPP %d is not supported\n", jzfb.bpp); ++ val |= LCD_CTRL_BPP_16; ++ break; ++ } ++ ++ switch (jzfb.cfg & MODE_MASK) { ++ case MODE_STN_MONO_DUAL: ++ case MODE_STN_COLOR_DUAL: ++ case MODE_STN_MONO_SINGLE: ++ case MODE_STN_COLOR_SINGLE: ++ switch (jzfb.bpp) { ++ case 1: ++ /* val |= LCD_CTRL_PEDN; */ ++ case 2: ++ val |= LCD_CTRL_FRC_2; ++ break; ++ case 4: ++ val |= LCD_CTRL_FRC_4; ++ break; ++ case 8: ++ default: ++ val |= LCD_CTRL_FRC_16; ++ break; ++ } ++ break; ++ } ++ ++ val |= LCD_CTRL_BST_16; /* Burst Length is 16WORD=64Byte */ ++ val |= LCD_CTRL_OFUP; /* OutFIFO underrun protect */ ++ ++ switch (jzfb.cfg & MODE_MASK) { ++ case MODE_STN_MONO_DUAL: ++ case MODE_STN_COLOR_DUAL: ++ case MODE_STN_MONO_SINGLE: ++ case MODE_STN_COLOR_SINGLE: ++ switch (jzfb.cfg & STN_DAT_PINMASK) { ++ case STN_DAT_PIN1: ++ /* Do not adjust the hori-param value. */ ++ break; ++ case STN_DAT_PIN2: ++ align2(jzfb.hsw); ++ align2(jzfb.elw); ++ align2(jzfb.blw); ++ break; ++ case STN_DAT_PIN4: ++ align4(jzfb.hsw); ++ align4(jzfb.elw); ++ align4(jzfb.blw); ++ break; ++ case STN_DAT_PIN8: ++ align8(jzfb.hsw); ++ align8(jzfb.elw); ++ align8(jzfb.blw); ++ break; ++ } ++ break; ++ } ++ ++ REG_LCD_CTRL = val; ++ ++ switch (jzfb.cfg & MODE_MASK) { ++ case MODE_STN_MONO_DUAL: ++ case MODE_STN_COLOR_DUAL: ++ case MODE_STN_MONO_SINGLE: ++ case MODE_STN_COLOR_SINGLE: ++ if (((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL) || ++ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL)) ++ stnH = jzfb.h >> 1; ++ else ++ stnH = jzfb.h; ++ ++ REG_LCD_VSYNC = (0 << 16) | jzfb.vsw; ++ REG_LCD_HSYNC = ((jzfb.blw+jzfb.w) << 16) | (jzfb.blw+jzfb.w+jzfb.hsw); ++ ++ /* Screen setting */ ++ REG_LCD_VAT = ((jzfb.blw + jzfb.w + jzfb.hsw + jzfb.elw) << 16) | (stnH + jzfb.vsw + jzfb.bfw + jzfb.efw); ++ REG_LCD_DAH = (jzfb.blw << 16) | (jzfb.blw + jzfb.w); ++ REG_LCD_DAV = (0 << 16) | (stnH); ++ ++ /* AC BIAs signal */ ++ REG_LCD_PS = (0 << 16) | (stnH+jzfb.vsw+jzfb.efw+jzfb.bfw); ++ ++ break; ++ ++ case MODE_TFT_GEN: ++ case MODE_TFT_SHARP: ++ case MODE_TFT_CASIO: ++ case MODE_TFT_SAMSUNG: ++ case MODE_8BIT_SERIAL_TFT: ++ case MODE_TFT_18BIT: ++ REG_LCD_VSYNC = (0 << 16) | jzfb.vsw; ++ REG_LCD_HSYNC = (0 << 16) | jzfb.hsw; ++ REG_LCD_DAV =((jzfb.vsw+jzfb.bfw) << 16) | (jzfb.vsw +jzfb.bfw+jzfb.h); ++ REG_LCD_DAH = ((jzfb.hsw + jzfb.blw) << 16) | (jzfb.hsw + jzfb.blw + jzfb.w ); ++ REG_LCD_VAT = (((jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw)) << 16) \ ++ | (jzfb.vsw + jzfb.bfw + jzfb.h + jzfb.efw); ++ break; ++ } ++ ++ switch (jzfb.cfg & MODE_MASK) { ++ case MODE_TFT_SAMSUNG: ++ { ++ unsigned int total, tp_s, tp_e, ckv_s, ckv_e; ++ unsigned int rev_s, rev_e, inv_s, inv_e; ++ ++ pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) * ++ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */ ++ ++ total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw; ++ tp_s = jzfb.blw + jzfb.w + 1; ++ tp_e = tp_s + 1; ++ ckv_s = tp_s - pclk/(1000000000/4100); ++ ckv_e = tp_s + total; ++ rev_s = tp_s - 11; /* -11.5 clk */ ++ rev_e = rev_s + total; ++ inv_s = tp_s; ++ inv_e = inv_s + total; ++ REG_LCD_CLS = (tp_s << 16) | tp_e; ++ REG_LCD_PS = (ckv_s << 16) | ckv_e; ++ REG_LCD_SPL = (rev_s << 16) | rev_e; ++ REG_LCD_REV = (inv_s << 16) | inv_e; ++ jzfb.cfg |= STFT_REVHI | STFT_SPLHI; ++ break; ++ } ++ case MODE_TFT_SHARP: ++ { ++ unsigned int total, cls_s, cls_e, ps_s, ps_e; ++ unsigned int spl_s, spl_e, rev_s, rev_e; ++ total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw; ++ spl_s = 1; ++ spl_e = spl_s + 1; ++ cls_s = 0; ++ cls_e = total - 60; /* > 4us (pclk = 80ns) */ ++ ps_s = cls_s; ++ ps_e = cls_e; ++ rev_s = total - 40; /* > 3us (pclk = 80ns) */ ++ rev_e = rev_s + total; ++ jzfb.cfg |= STFT_PSHI; ++ REG_LCD_SPL = (spl_s << 16) | spl_e; ++ REG_LCD_CLS = (cls_s << 16) | cls_e; ++ REG_LCD_PS = (ps_s << 16) | ps_e; ++ REG_LCD_REV = (rev_s << 16) | rev_e; ++ break; ++ } ++ case MODE_TFT_CASIO: ++ break; ++ } ++ ++ /* Configure the LCD panel */ ++ REG_LCD_CFG = jzfb.cfg; ++ ++ /* Timing setting */ ++ __cpm_stop_lcd(); ++ ++ val = jzfb.fclk; /* frame clk */ ++ if ( (jzfb.cfg & MODE_MASK) != MODE_8BIT_SERIAL_TFT) { ++ pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) * ++ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */ ++ } else { ++ /* serial mode: Hsync period = 3*Width_Pixel */ ++ pclk = val * (jzfb.w*3 + jzfb.hsw + jzfb.elw + jzfb.blw) * ++ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */ ++ } ++ ++ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) || ++ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL)) ++ pclk = (pclk * 3); ++ ++ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) || ++ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) || ++ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_SINGLE) || ++ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL)) ++ pclk = pclk >> ((jzfb.cfg & STN_DAT_PINMASK) >> 4); ++ ++ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) || ++ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL)) ++ pclk >>= 1; ++ ++ pll_div = (REG_CPM_CPCCR & CPM_CPCCR_PCS); /* clock source,0:pllout/2 1: pllout */ ++ pll_div = pll_div ? 1 : 2; ++ val = (__cpm_get_pllout() / pll_div) / pclk; ++ val--; ++ if (val > 0x1ff) { ++ printf("CPM_LPCDR too large, set it to 0x1ff\n"); ++ val = 0x1ff; ++ } ++ __cpm_set_pixdiv(val); ++ ++ val = pclk * 3 ; /* LCDClock > 2.5*Pixclock */ ++ if (val > 150000000) { ++ printf("Warning: LCDClock=%d\n, LCDClock must less or equal to 150MHz.\n", val); ++ printf("Change LCDClock to 150MHz\n"); ++ val = 150000000; ++ } ++ val = (__cpm_get_pllout() / pll_div) / val; ++ val--; ++ if (val > 0x1f) { ++ printf("CPM_CPCCR.LDIV too large, set it to 0x1f\n"); ++ val = 0x1f; ++ } ++ __cpm_set_ldiv( val ); ++ REG_CPM_CPCCR |= CPM_CPCCR_CE ; /* update divide */ ++ ++ __cpm_start_lcd(); ++ udelay(1000); ++ ++ REG_LCD_DA0 = fbi->fdadr0; /* frame descripter*/ ++ ++ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) || ++ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL)) ++ REG_LCD_DA1 = fbi->fdadr1; /* frame descripter*/ ++ ++ return 0; ++} ++ ++void lcd_ctrl_init (void *lcdbase) ++{ ++ __lcd_display_pin_init(); ++ __lcd_display_on() ; ++ ++ jz_lcd_init_mem(lcdbase, &panel_info); ++ jz_lcd_desc_init(&panel_info); ++ jz_lcd_hw_init(&panel_info); ++ ++} ++ ++/* ++ * Before enabled lcd controller, lcd registers should be configured correctly. ++ */ ++void lcd_enable (void) ++{ ++ REG_LCD_CTRL &= ~(1<<4); /* LCDCTRL.DIS */ ++ REG_LCD_CTRL |= 1<<3; /* LCDCTRL.ENA*/ ++} ++ ++void lcd_disable (void) ++{ ++ REG_LCD_CTRL |= (1<<4); ++} ++ ++void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) ++{ ++} ++ ++void lcd_initcolregs (void) ++{ ++} +diff --git a/drivers/video/nanonote_gpm940b0.h b/drivers/video/nanonote_gpm940b0.h +new file mode 100644 +index 0000000..efe491e +--- /dev/null ++++ b/drivers/video/nanonote_gpm940b0.h +@@ -0,0 +1,135 @@ ++/* ++ * JzRISC lcd controller ++ * ++ * Xiangfu Liu ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __QI_LB60_GPM940B0_H__ ++#define __QI_LB60_GPM940B0_H__ ++ ++struct lcd_desc{ ++ unsigned int next_desc; /* LCDDAx */ ++ unsigned int databuf; /* LCDSAx */ ++ unsigned int frame_id; /* LCDFIDx */ ++ unsigned int cmd; /* LCDCMDx */ ++}; ++ ++#define MODE_MASK 0x0f ++#define MODE_TFT_GEN 0x00 ++#define MODE_TFT_SHARP 0x01 ++#define MODE_TFT_CASIO 0x02 ++#define MODE_TFT_SAMSUNG 0x03 ++#define MODE_CCIR656_NONINT 0x04 ++#define MODE_CCIR656_INT 0x05 ++#define MODE_STN_COLOR_SINGLE 0x08 ++#define MODE_STN_MONO_SINGLE 0x09 ++#define MODE_STN_COLOR_DUAL 0x0a ++#define MODE_STN_MONO_DUAL 0x0b ++#define MODE_8BIT_SERIAL_TFT 0x0c ++ ++#define MODE_TFT_18BIT (1<<7) ++ ++#define STN_DAT_PIN1 (0x00 << 4) ++#define STN_DAT_PIN2 (0x01 << 4) ++#define STN_DAT_PIN4 (0x02 << 4) ++#define STN_DAT_PIN8 (0x03 << 4) ++#define STN_DAT_PINMASK STN_DAT_PIN8 ++ ++#define STFT_PSHI (1 << 15) ++#define STFT_CLSHI (1 << 14) ++#define STFT_SPLHI (1 << 13) ++#define STFT_REVHI (1 << 12) ++ ++#define SYNC_MASTER (0 << 16) ++#define SYNC_SLAVE (1 << 16) ++ ++#define DE_P (0 << 9) ++#define DE_N (1 << 9) ++ ++#define PCLK_P (0 << 10) ++#define PCLK_N (1 << 10) ++ ++#define HSYNC_P (0 << 11) ++#define HSYNC_N (1 << 11) ++ ++#define VSYNC_P (0 << 8) ++#define VSYNC_N (1 << 8) ++ ++#define DATA_NORMAL (0 << 17) ++#define DATA_INVERSE (1 << 17) ++ ++ ++/* Jz LCDFB supported I/O controls. */ ++#define FBIOSETBACKLIGHT 0x4688 ++#define FBIODISPON 0x4689 ++#define FBIODISPOFF 0x468a ++#define FBIORESET 0x468b ++#define FBIOPRINT_REG 0x468c ++ ++/* ++ * LCD panel specific definition ++ */ ++#define MODE (0xc9) /* 8bit serial RGB */ ++ ++#define __spi_write_reg1(reg, val) \ ++do { \ ++ unsigned char no; \ ++ unsigned short value; \ ++ unsigned char a=reg; \ ++ unsigned char b=val; \ ++ __gpio_set_pin(SPEN); \ ++ __gpio_set_pin(SPCK); \ ++ __gpio_clear_pin(SPDA); \ ++ __gpio_clear_pin(SPEN); \ ++ value=((a<<8)|(b&0xFF)); \ ++ for(no=0;no<16;no++) \ ++ { \ ++ __gpio_clear_pin(SPCK); \ ++ if((value&0x8000)==0x8000) \ ++ __gpio_set_pin(SPDA); \ ++ else \ ++ __gpio_clear_pin(SPDA); \ ++ __gpio_set_pin(SPCK); \ ++ value=(value<<1); \ ++ } \ ++ __gpio_set_pin(SPEN); \ ++} while (0) ++ ++#define __lcd_display_pin_init() \ ++do { \ ++ __cpm_start_tcu(); \ ++ __gpio_as_output(SPEN); /* use SPDA */ \ ++ __gpio_as_output(SPCK); /* use SPCK */ \ ++ __gpio_as_output(SPDA); /* use SPDA */ \ ++} while (0) ++ ++#define __lcd_display_on() \ ++do { \ ++ __spi_write_reg1(0x05, 0x1e); \ ++ __spi_write_reg1(0x05, 0x5e); \ ++ __spi_write_reg1(0x07, 0x8d); \ ++ __spi_write_reg1(0x13, 0x01); \ ++ __spi_write_reg1(0x05, 0x5f); \ ++} while (0) ++ ++#define __lcd_display_off() \ ++do { \ ++ __spi_write_reg1(0x05, 0x5e); \ ++} while (0) ++ ++#endif /* __QI_LB60_GPM940B0_H__ */ +diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h +index 52b370c..d3e78ad 100644 +--- a/include/configs/qi_lb60.h ++++ b/include/configs/qi_lb60.h +@@ -32,6 +32,13 @@ + * Miscellaneous configurable options + */ + #define CONFIG_NANONOTE ++ ++#define CONFIG_LCD ++#define CONFIG_SYS_WHITE_ON_BLACK ++#define LCD_BPP LCD_COLOR32 ++#define CONFIG_VIDEO_GPM940B0 ++ ++ + #define CONFIG_JZ4740_MMC + #define CONFIG_MMC 1 + #define CONFIG_FAT 1 +diff --git a/include/lcd.h b/include/lcd.h +index 42070d7..6de5482 100644 +--- a/include/lcd.h ++++ b/include/lcd.h +@@ -263,8 +263,44 @@ typedef struct vidinfo { + + void init_panel_info(vidinfo_t *vid); + +-#else ++#elif defined(CONFIG_JZSOC) ++/* ++ * LCD controller stucture for JZSOC: JZ4740 ++ */ ++struct jz_fb_dma_descriptor { ++ u_long fdadr; /* Frame descriptor address register */ ++ u_long fsadr; /* Frame source address register */ ++ u_long fidr; /* Frame ID register */ ++ u_long ldcmd; /* Command register */ ++}; ++ ++/* ++ * Jz LCD info ++ */ ++struct jz_fb_info { ++ ++ u_long fdadr0; /* physical address of frame/palette descriptor */ ++ u_long fdadr1; /* physical address of frame descriptor */ ++ ++ /* DMA descriptors */ ++ struct jz_fb_dma_descriptor * dmadesc_fblow; ++ struct jz_fb_dma_descriptor * dmadesc_fbhigh; ++ struct jz_fb_dma_descriptor * dmadesc_palette; ++ u_long screen; /* address of frame buffer */ ++ u_long palette; /* address of palette memory */ ++ u_int palette_size; ++}; ++typedef struct vidinfo { ++ ushort vl_col; /* Number of columns (i.e. 640) */ ++ ushort vl_row; /* Number of rows (i.e. 480) */ ++ u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */ ++ ++ struct jz_fb_info jz_fb; ++} vidinfo_t; ++ ++extern vidinfo_t panel_info; + ++#else + typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 160) */ + ushort vl_row; /* Number of rows (i.e. 100) */ +@@ -318,6 +354,7 @@ void lcd_show_board_info(void); + #define LCD_COLOR4 2 + #define LCD_COLOR8 3 + #define LCD_COLOR16 4 ++#define LCD_COLOR32 5 + + /*----------------------------------------------------------------------*/ + #if defined(CONFIG_LCD_INFO_BELOW_LOGO) +@@ -369,7 +406,7 @@ void lcd_show_board_info(void); + # define CONSOLE_COLOR_GREY 14 + # define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ + +-#else ++#elif LCD_BPP == LCD_COLOR16 + + /* + * 16bpp color definitions +@@ -377,6 +414,15 @@ void lcd_show_board_info(void); + # define CONSOLE_COLOR_BLACK 0x0000 + # define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */ + ++#elif LCD_BPP == LCD_COLOR32 ++/* ++ * 18,24,32 bpp color definitions ++ */ ++# define CONSOLE_COLOR_BLACK 0x00000000 ++# define CONSOLE_COLOR_WHITE 0xffffffff /* Must remain last / highest */ ++ ++#else ++ + #endif /* color definitions */ + + /************************************************************************/ +@@ -406,7 +452,7 @@ void lcd_show_board_info(void); + #if LCD_BPP == LCD_MONOCHROME + # define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \ + (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7) +-#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16) ++#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16) || (LCD_BPP == LCD_COLOR32) + # define COLOR_MASK(c) (c) + #else + # error Unsupported LCD BPP. +-- +1.7.9.5 + -- cgit v1.2.3