From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001 From: James <> Date: Wed, 4 Nov 2015 11:49:21 +0000 Subject: trunk-47381 --- package/base-files/image-config.in | 291 +++++++++++++++++++++++++++++++++++++ 1 file changed, 291 insertions(+) create mode 100644 package/base-files/image-config.in (limited to 'package/base-files/image-config.in') diff --git a/package/base-files/image-config.in b/package/base-files/image-config.in new file mode 100644 index 0000000..c1c0924 --- /dev/null +++ b/package/base-files/image-config.in @@ -0,0 +1,291 @@ +# Copyright (C) 2006-2012 OpenWrt.org +# Copyright (C) 2010 Vertical Communications +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +menuconfig PREINITOPT + bool "Preinit configuration options" if IMAGEOPT + default n + help + These options are used to control the environment used to initialize + the system before running init (which typically mean /sbin/init which + switches to multiuser mode). + +config TARGET_PREINIT_SUPPRESS_STDERR + bool "Suppress stderr messages during preinit" if PREINITOPT + default y + help + Sends stderr to null during preinit. This is the default behaviour + in previous versions of OpenWrt. This also prevents init process + itself from displaying stderr, however processes launched by init + in multiuser through inittab will use the current terminal (e.g. + the ash shell launched by inittab will display stderr). That's + the same behaviour as seen in previous version of OpenWrt. + +config TARGET_PREINIT_TIMEOUT + int + prompt "Failsafe wait timeout" if PREINITOPT + default 2 + help + How long to wait for failsafe mode to be entered before + continuing with a regular boot if failsafe not selected. + +config TARGET_PREINIT_SHOW_NETMSG + bool + prompt "Show all preinit network messages" if PREINITOPT + default n + help + Show preinit all network messages (via netmsg broadcast), not only + the message indicating to press reset to enter failsafe. Note that + if the architecture doesn't define an interface, and there is no + 'Preinit network interface' defined, then no messages will be + emitted, even if this is set. + +config TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG + bool + prompt "Suppress network message indicating failsafe" if PREINITOPT + default n + help + If "Show all preinit network messages" above is not set, then + setting this option suppresses the only message that would be + emitted otherwise, name the network message to enter failsafe + (via netmsg). + +config TARGET_PREINIT_IFNAME + string + prompt "Preinit network interface" if PREINITOPT + default "" + help + Interface for sending preinit messages to network, and any other + default networking in failsafe or preinit. If empty + uses $ifname (if defined in /etc/preinit.arch). + +config TARGET_PREINIT_IP + string + prompt "IP address for preinit network messages" if PREINITOPT + default "192.168.1.1" + help + IP address used to configure interface for preinit network + messages, including failsafe messages + +config TARGET_PREINIT_NETMASK + string + prompt "Netmask for preinit network messages" if PREINITOPT + default "255.255.255.0" + help + Netmask used to configure interface for preinit network + messages, including failsafes messages + +config TARGET_PREINIT_BROADCAST + string + prompt "Broadcast address for preinit network messages" if PREINITOPT + default "192.168.1.255" + help + Broadcast address to which to send preinit network messages, as + as failsafe messages + + +menuconfig INITOPT + bool "Init configuration options" if IMAGEOPT + default n + help + These option choose the command that will run as the 'init' command + (that is which is responsible for controlling the system once preinit + transfers control to it) as well as some options controlling its + behaviour. Normally init is /sbin/init. + + config TARGET_INIT_PATH + string + prompt "PATH for regular boot" if INITOPT + default "/bin:/sbin:/usr/bin:/usr/sbin" + help + Default PATH used during normal operation + + config TARGET_INIT_ENV + string + prompt "Environment variables to set when starting init (start with none)" if INITOPT + default "" + help + Should be a space seperated list of variable assignments. These + variables will be present in the environment. Spaces may not be + present (including through expansion) even in a quoted string + (env doesn't understanding quoting). + + config TARGET_INIT_CMD + string + prompt "Init command" if INITOPT + default "/sbin/init" + help + The executable to run as the init process. Is 'exec'd by + preinit (which is the init that the kernel launches on boot). + + config TARGET_INIT_SUPPRESS_STDERR + bool + prompt "Suppress stderr messages of init" if INITOPT + default y + help + Prevents showing stderr messages for init command if not already + suppressed during preinit. This is the default behaviour in + previous versions of OpenWrt. Removing this does nothing if + stderr is suppressed during preinit (which is the default). + + +menuconfig VERSIONOPT + bool "Version configuration options" if IMAGEOPT + default n + help + These options allow to override the version information embedded in + the /etc/openwrt_version, /etc/openwrt_release, /etc/banner and + /etc/opkg.conf files. Usually there is no need to set these, but + they're useful for release builds or custom OpenWrt redistributions + that should carry custom version tags. + +if VERSIONOPT + + config VERSION_DIST + string + prompt "Release distribution" + default "OpenWrt" + help + This is the name of the release distribution. + If unspecified, it defaults to OpenWrt. + + config VERSION_NICK + string + prompt "Release version nickname" + help + This is the release codename embedded in the image. + If unspecified, it defaults to the name of source branch. + + config VERSION_NUMBER + string + prompt "Release version number" + help + This is the release version number embedded in the image. + If unspecified, it defaults to the svn or git-svn revision + of the build tree. + + config VERSION_REPO + string + prompt "Release repository" + default "http://downloads.openwrt.org/snapshots/trunk/%S/packages" + help + This is the repository address embedded in the image, it defaults + to the trunk snapshot repo; the url may contain the following placeholders: + %R .. Revision number + %V .. Release version or revision number, uppercase + %v .. Release version or revision number, lowercase + %C .. Release version or "Bleeding Edge", uppercase + %c .. Release version or "bleeding_edge", lowercase + %N .. Release name, uppercase + %n .. Release name, lowercase + %D .. Distribution name or "OpenWrt", uppercase + %d .. Distribution name or "openwrt", lowercase + %T .. Target name + %S .. Target/Subtarget name + %t .. Build taint flags, e.g. "no-all busybox" + %M .. Manufacturer name or "OpenWrt" + %P .. Product name or "Generic" + %h .. Hardware revision or "v0" + + config VERSION_MANUFACTURER + string + prompt "Manufacturer name" + help + This is the manufacturer name embedded in /etc/device_info + Useful for OEMs building OpenWrt based firmware + + config VERSION_MANUFACTURER_URL + string + prompt "Manufacturer URL" + help + This is an URL to the manufacturer's website embedded in /etc/device_info + Useful for OEMs building OpenWrt based firmware + + config VERSION_PRODUCT + string + prompt "Product name" + help + This is the product name embedded in /etc/device_info + Useful for OEMs building OpenWrt based firmware + + config VERSION_HWREV + string + prompt "Hardware revision" + help + This is the hardware revision string embedded in /etc/device_info + Useful for OEMs building OpenWrt based firmware + + config VERSION_FILENAMES + bool + prompt "Version number in filenames" + default y + help + Enable this to include the version number in firmware image, SDK- + and Image Builder archive file names +endif + + +menuconfig PER_FEED_REPO + bool "Separate feed repositories" if IMAGEOPT + default y + help + If set, a separate repository is generated within bin/*/packages/ + for the core packages and each enabled feed. + + config PER_FEED_REPO_ADD_DISABLED + bool "Add available but not enabled feeds to opkg.conf" + default y + depends on PER_FEED_REPO + help + Add not installed or disabled feeds from feeds.conf to opkg.conf. + + config PER_FEED_REPO_ADD_COMMENTED + bool "Comment out not enabled feeds" + default y + depends on PER_FEED_REPO && PER_FEED_REPO_ADD_DISABLED + help + Add not enabled feeds as commented out source lines to opkg.conf. + +source "tmp/.config-feeds.in" + + +menuconfig SMIMEOPT + bool "Package signing options" if IMAGEOPT + default n + help + These options configure the signing key and certificate to + be used for signing and verifying packages. + + config OPKGSMIME_CERT + string + prompt "Path to certificate (PEM certificate format)" if SMIMEOPT + help + Path to the certificate to use for signature verification + + config OPKGSMIME_KEY + string + prompt "Path to signing key (PEM private key format)" if SMIMEOPT + help + Path to the key to use for signing packages + + config OPKGSMIME_PASSPHRASE + bool + default y + prompt "Wait for a passphrase when signing packages?" if SMIMEOPT + help + If this value is set, then the build will pause and request a passphrase + from the command line when signing packages. This SHOULD NOT be used with + automatic builds. If this value is not set, a file can be specified from + which the passphrase will be read. + + config OPKGSMIME_PASSFILE + string + prompt "Path to a file containing the passphrase" if SMIMEOPT + depends on !OPKGSMIME_PASSPHRASE + help + Path to a file containing the passphrase for the signing key. + If the signing key is not encrypted and does not require a passphrase, + this option may be left blank. -- cgit v1.2.3