--- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -160,6 +160,14 @@ config ARCH_PRPMC1100 PrPCM1100 Processor Mezanine Module. For more information on this platform, see . +config MACH_TW5334 + bool "Titan Wireless TW-533-4" + select PCI + help + Say 'Y' here if you want your kernel to support the Titan + Wireless TW533-4. For more information on this platform, + see http://openwrt.org + config MACH_NAS100D bool prompt "NAS100D" --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o +obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o obj-y += common.o @@ -49,6 +50,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o +obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h @@ -44,7 +44,7 @@ static __inline__ void __arch_decomp_set machine_is_gateway7001() || machine_is_wg302v2() || machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() || machine_is_pronghorn() || machine_is_pronghorn_metro() || - machine_is_wrt300nv2()) + machine_is_wrt300nv2() || machine_is_tw5334()) uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; else uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; --- /dev/null +++ b/arch/arm/mach-ixp4xx/tw5334-pci.c @@ -0,0 +1,68 @@ +/* + * arch/arch/mach-ixp4xx/tw5334-pci.c + * + * PCI setup routines for the Titan Wireless TW-533-4 + * + * Copyright (C) 2008 Imre Kaloz + * + * based on coyote-pci.c: + * Copyright (C) 2002 Jungo Software Technologies. + * Copyright (C) 2003 MontaVista Softwrae, Inc. + * + * Maintainer: Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include + +#include + +void __init tw5334_pci_preinit(void) +{ + irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_LEVEL_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init tw5334_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 12) + return IRQ_IXP4XX_GPIO6; + else if (slot == 13) + return IRQ_IXP4XX_GPIO2; + else if (slot == 14) + return IRQ_IXP4XX_GPIO1; + else if (slot == 15) + return IRQ_IXP4XX_GPIO0; + else return -1; +} + +struct hw_pci tw5334_pci __initdata = { + .nr_controllers = 1, + .preinit = tw5334_pci_preinit, + .ops = &ixp4xx_ops, + .setup = ixp4xx_setup, + .map_irq = tw5334_map_irq, +}; + +int __init tw5334_pci_init(void) +{ + if (machine_is_tw5334()) + pci_common_init(&tw5334_pci); + return 0; +} + +subsys_initcall(tw5334_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/tw5334-setup.c @@ -0,0 +1,167 @@ +/* + * arch/arm/mach-ixp4xx/tw5334-setup.c + * + * Board setup for the Titan Wireless TW-533-4 + * + * Copyright (C) 2008 Imre Kaloz + * + * based on coyote-setup.c: + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Imre Kaloz + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct flash_platform_data tw5334_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource tw5334_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device tw5334_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &tw5334_flash_data, + }, + .num_resources = 1, + .resource = &tw5334_flash_resource, +}; + +static struct resource tw5334_uart_resource = { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, +}; + +static struct plat_serial8250_port tw5334_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device tw5334_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = tw5334_uart_data, + }, + .num_resources = 1, + .resource = &tw5334_uart_resource, +}; + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info tw5334_plat_eth[] = { + { + .phy = 0, + .rxq = 3, + .txreadyq = 20, + }, { + .phy = 1, + .rxq = 4, + .txreadyq = 21, + } +}; + +static struct platform_device tw5334_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = tw5334_plat_eth, + .dev.coherent_dma_mask = DMA_BIT_MASK(32), + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = tw5334_plat_eth + 1, + .dev.coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +static struct platform_device *tw5334_devices[] __initdata = { + &tw5334_flash, + &tw5334_uart, + &tw5334_eth[0], + &tw5334_eth[1], +}; + +static void __init tw5334_init(void) +{ + uint8_t __iomem *f; + int i; + + ixp4xx_sys_init(); + + tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices)); + + /* + * Map in a portion of the flash and read the MAC addresses. + * Since it is stored in BE in the flash itself, we need to + * byteswap it if we're in LE mode. + */ + f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000); + if (f) { + for (i = 0; i < 6; i++) { +#ifdef __ARMEB__ + tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i); + tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i); +#else + tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3)); + tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3)); +#endif + } + iounmap(f); + } + + printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 0\n", + tw5334_plat_eth[0].hwaddr); + printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 1\n", + tw5334_plat_eth[1].hwaddr); +} + +#ifdef CONFIG_MACH_TW5334 +MACHINE_START(TW5334, "Titan Wireless TW-533-4") + /* Maintainer: Imre Kaloz */ + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .init_time = ixp4xx_timer_init, + .atag_offset = 0x0100, + .init_machine = tw5334_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif + .restart = ixp4xx_restart, +MACHINE_END +#endif