--- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts @@ -0,0 +1,287 @@ +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "ZyXEL NSA310S"; + compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-names = "default"; + + pmx_sata0: pmx-sata0 { + marvell,pins; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins; + marvell,function = "sata1"; + }; + pmx_usb_power: pmx-usb-power { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + pmx_pwr_off: pmx-pwr-off { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + pmx_btn_copy: pmx-btn-copy { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + pmx_btn_power: pmx-btn-power { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + pmx_led_hdd2_green: pmx-led-hdd2-green { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_hdd2_red: pmx-led-hdd2-red { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_led_copy_green: pmx-led-copy-green { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + pmx_led_copy_red: pmx-led-copy-red { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_led_sys_orange: pmx-led-sys-orange { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_hdd1_green: pmx-led-hdd1-green { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_led_hdd1_red: pmx-led-hdd1-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + pmx_pwr_sata1: pmx-pwr-sata1 { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + rtc@10300 { + status = "disabled"; + }; + + i2c@11000 { + status = "okay"; + ht1382: rtc@68 { + compatible = "htk,ht1382"; + reg = <0x68>; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>; + + usb0_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + }; + + sata1_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + }; + }; + + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; + pinctrl-names = "default"; + + button@1 { + label = "Power Button"; + linux,code = ; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + }; + button@2 { + label = "Copy Button"; + linux,code = ; + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; + button@3 { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red + &pmx_led_usb_green + &pmx_led_sys_green &pmx_led_sys_orange + &pmx_led_copy_green &pmx_led_copy_red + &pmx_led_hdd1_green &pmx_led_hdd1_red>; + pinctrl-names = "default"; + + green-sys { + label = "nsa310s:green:sys"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + orange-sys { + label = "nsa310s:orange:sys"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + green-hdd1 { + label = "nsa310s:green:hdd1"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + red-hdd1 { + label = "nsa310s:red:hdd1"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + green-hdd2 { + label = "nsa310s:green:hdd2"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; + red-hdd2 { + label = "nsa310s:red:hdd2"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + green-usb { + label = "nsa310s:green:usb"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + green-copy { + label = "nsa310s:green:copy"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ide-disk"; + }; + red-copy { + label = "nsa310s:red:copy"; + gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_pwr_off>; + pinctrl-names = "default"; + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; + }; +}; + +&nand { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0xe0000>; + }; + + partition@e0000 { + label = "u-boot environment"; + reg = <0xe0000 0x100000>; + }; + + partition@100000 { + label = "second stage u-boot"; + reg = <0x100000 0x200000>; + }; + + partition@200000 { + label = "root"; + reg = <0x200000 0xfe00000>; + }; +}; + +&mdio { + status = "okay"; + ethphy0: ethernet-phy@1 { + compatible = "marvell,88e1318s"; + reg = <1>; + marvell,reg-init = <0x1 0x16 0x0 0x3>, + <0x1 0x10 0x0 0x1017>, + <0x1 0x11 0x0 0x4408>, + <0x1 0x16 0x0 0x0>, + <0x1 0x4 0x0 0x1e1>, + <0x1 0x9 0x0 0x300>, + <0x1 0x10 0x0 0x3860>, + <0x1 0x0 0x0 0x9140>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -145,6 +145,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood- kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ kirkwood-nsa310a.dtb \ + kirkwood-nsa310s.dtb \ kirkwood-openblocks_a6.dtb \ kirkwood-openblocks_a7.dtb \ kirkwood-openrd-base.dtb \