From 4f09499bc1d9bb095caccbcd73ff951ee631e521 Mon Sep 17 00:00:00 2001 From: Mathieu Olivari Date: Fri, 8 May 2015 15:42:40 -0700 Subject: [PATCH 1/8] stmmac: add phy-handle support to the platform layer On stmmac driver, PHY specification in device-tree was done using the non-standard property "snps,phy-addr". Specifying a PHY on a different MDIO bus that the one within the stmmac controller doesn't seem to be possible when device-tree is used. This change adds support for the phy-handle property, as specified in Documentation/devicetree/bindings/net/ethernet.txt. Signed-off-by: Mathieu Olivari --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 28 ++++++++++++++-------- .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 6 ++++- include/linux/stmmac.h | 1 + 3 files changed, 24 insertions(+), 11 deletions(-) --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -52,6 +52,7 @@ #include "stmmac_ptp.h" #include "stmmac.h" #include +#include #define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x) @@ -818,18 +819,25 @@ static int stmmac_init_phy(struct net_de priv->speed = 0; priv->oldduplex = -1; - if (priv->plat->phy_bus_name) - snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x", - priv->plat->phy_bus_name, priv->plat->bus_id); - else - snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x", - priv->plat->bus_id); - - snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, - priv->plat->phy_addr); - pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id_fmt); + if (priv->plat->phy_node) { + phydev = of_phy_connect(dev, priv->plat->phy_node, + &stmmac_adjust_link, 0, interface); + } else { + if (priv->plat->phy_bus_name) + snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x", + priv->plat->phy_bus_name, priv->plat->bus_id); + else + snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x", + priv->plat->bus_id); + + snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, + priv->plat->phy_addr); + pr_debug("stmmac_init_phy: trying to attach to %s\n", + phy_id_fmt); - phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface); + phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, + interface); + } if (IS_ERR(phydev)) { pr_err("%s: Could not attach to PHY\n", dev->name); --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "stmmac.h" static const struct of_device_id stmmac_dt_ids[] = { @@ -155,13 +156,16 @@ static int stmmac_probe_config_dt(struct /* Default to phy auto-detection */ plat->phy_addr = -1; + /* If we find a phy-handle property, use it as the PHY */ + plat->phy_node = of_parse_phandle(np, "phy-handle", 0); + /* "snps,phy-addr" is not a standard property. Mark it as deprecated * and warn of its use. Remove this when phy node support is added. */ if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); - if (plat->phy_bus_name) + if (plat->phy_node || plat->phy_bus_name) plat->mdio_bus_data = NULL; else plat->mdio_bus_data = --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -99,6 +99,7 @@ struct plat_stmmacenet_data { int phy_addr; int interface; struct stmmac_mdio_bus_data *mdio_bus_data; + struct device_node *phy_node; struct stmmac_dma_cfg *dma_cfg; int clk_csr; int has_gmac;