From c25b23b8a387e7d31f7a74af8e37b61e9e6ebb21 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 20 Mar 2015 23:14:31 +0100 Subject: [PATCH] bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On ARM SoCs with bgmac Ethernet hardware we don't have any normal PHY. There is always a switch attached but it's not even controlled over MDIO like in case of MIPS devices. We need a fixed PHY to be able to send/receive packets from the switch. Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -1330,13 +1331,46 @@ static void bgmac_adjust_link(struct net } } +static int bgmac_fixed_phy_register(struct bgmac *bgmac) +{ + struct fixed_phy_status fphy_status = { + .link = 1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, + }; + struct phy_device *phy_dev; + int err; + + phy_dev = fixed_phy_register(PHY_POLL, &fphy_status, NULL); + if (!phy_dev || IS_ERR(phy_dev)) { + bgmac_err(bgmac, "Failed to register fixed PHY device\n"); + return -ENODEV; + } + + err = phy_connect_direct(bgmac->net_dev, phy_dev, bgmac_adjust_link, + PHY_INTERFACE_MODE_MII); + if (err) { + bgmac_err(bgmac, "Connecting PHY failed\n"); + return err; + } + + bgmac->phy_dev = phy_dev; + + return err; +} + static int bgmac_mii_register(struct bgmac *bgmac) { + struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; struct mii_bus *mii_bus; struct phy_device *phy_dev; char bus_id[MII_BUS_ID_SIZE + 3]; int i, err = 0; + if (ci->id == BCMA_CHIP_ID_BCM4707 || + ci->id == BCMA_CHIP_ID_BCM53018) + return bgmac_fixed_phy_register(bgmac); + mii_bus = mdiobus_alloc(); if (!mii_bus) return -ENOMEM;