From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Sun, 3 Jul 2011 15:00:38 +0200
Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
 arch/mips/bcm63xx/dev-flash.c                     |   35 +++++++++++++++++++-
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
 2 files changed, 33 insertions(+), 2 deletions(-)

--- a/arch/mips/bcm63xx/dev-flash.c
+++ b/arch/mips/bcm63xx/dev-flash.c
@@ -17,9 +17,12 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/spi-nor.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
 
 #include <bcm63xx_cpu.h>
 #include <bcm63xx_dev_flash.h>
+#include <bcm63xx_dev_hsspi.h>
 #include <bcm63xx_regs.h>
 #include <bcm63xx_io.h>
 
@@ -66,6 +69,21 @@ void __init bcm63xx_flash_force_phys_bas
 	mtd_resources[0].end = end;
 }
 
+static struct flash_platform_data bcm63xx_flash_data = {
+	.part_probe_types	= bcm63xx_part_types,
+};
+
+static struct spi_board_info bcm63xx_spi_flash_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= 0,
+		.max_speed_hz	= 781000,
+		.modalias	= "m25p80",
+		.platform_data	= &bcm63xx_flash_data,
+	},
+};
+
 static int __init bcm63xx_detect_flash_type(void)
 {
 	u32 val;
@@ -73,9 +91,15 @@ static int __init bcm63xx_detect_flash_t
 	switch (bcm63xx_get_cpu_id()) {
 	case BCM6318_CPU_ID:
 		/* only support serial flash */
+		bcm63xx_spi_flash_info[0].max_speed_hz = 62500000;
 		return BCM63XX_FLASH_TYPE_SERIAL;
 	case BCM6328_CPU_ID:
 		val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
+		if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
+			bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
+		else
+			bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
+
 		if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
 			return BCM63XX_FLASH_TYPE_SERIAL;
 		else
@@ -94,12 +118,20 @@ static int __init bcm63xx_detect_flash_t
 			return BCM63XX_FLASH_TYPE_SERIAL;
 	case BCM6362_CPU_ID:
 		val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
+		if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
+			bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
+		else
+			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
+
 		if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
 			return BCM63XX_FLASH_TYPE_SERIAL;
 		else
 			return BCM63XX_FLASH_TYPE_NAND;
 	case BCM6368_CPU_ID:
 		val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
+		if (val & STRAPBUS_6368_SPI_CLK_FAST)
+			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
+
 		switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
 		case STRAPBUS_6368_BOOT_SEL_NAND:
 			return BCM63XX_FLASH_TYPE_NAND;
@@ -110,6 +142,11 @@ static int __init bcm63xx_detect_flash_t
 		}
 	case BCM63268_CPU_ID:
 		val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
+		if (val & STRAPBUS_63268_HSSPI_CLK_FAST)
+			bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
+		else
+			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
+
 		if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
 			return BCM63XX_FLASH_TYPE_SERIAL;
 		else
@@ -195,8 +232,17 @@ int __init bcm63xx_flash_register(void)
 
 		return platform_device_register(&mtd_dev);
 	case BCM63XX_FLASH_TYPE_SERIAL:
-		pr_warn("unsupported serial flash detected\n");
-		return -ENODEV;
+		if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
+		    BCMCPU_IS_63268()) {
+			bcm63xx_spi_flash_info[0].bus_num = 1;
+			bcm63xx_spi_flash_info[0].mode = SPI_RX_DUAL;
+		}
+
+		if (BCMCPU_IS_6358() || BCMCPU_IS_6368())
+			bcm63xx_flash_data.max_transfer_len = SPI_6358_MSG_DATA_SIZE;
+
+		return spi_register_board_info(bcm63xx_spi_flash_info,
+					ARRAY_SIZE(bcm63xx_spi_flash_info));
 	case BCM63XX_FLASH_TYPE_NAND:
 		pr_warn("unsupported NAND flash detected\n");
 		return -ENODEV;
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -708,6 +708,7 @@
 #define GPIO_STRAPBUS_REG		0x40
 #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
 #define STRAPBUS_6358_BOOT_SEL_SERIAL	(0 << 1)
+#define STRAPBUS_6368_SPI_CLK_FAST	(1 << 6)
 #define STRAPBUS_6368_BOOT_SEL_MASK	0x3
 #define STRAPBUS_6368_BOOT_SEL_NAND	0
 #define STRAPBUS_6368_BOOT_SEL_SERIAL	1
@@ -1564,6 +1565,7 @@
 #define IDDQ_CTRL_63268_USBH		(1 << 4)
 
 #define MISC_STRAPBUS_6328_REG		0x240
+#define STRAPBUS_6328_HSSPI_CLK_FAST	(1 << 4)
 #define STRAPBUS_6328_FCVO_SHIFT	7
 #define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
 #define STRAPBUS_6328_BOOT_SEL_SERIAL	(1 << 28)