From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001 From: James <> Date: Wed, 4 Nov 2015 11:49:21 +0000 Subject: trunk-47381 --- .../0051-rt5350-spi-second-device.patch | 368 +++++++++++++++++++++ 1 file changed, 368 insertions(+) create mode 100644 target/linux/ramips/patches-3.18/0051-rt5350-spi-second-device.patch (limited to 'target/linux/ramips/patches-3.18/0051-rt5350-spi-second-device.patch') diff --git a/target/linux/ramips/patches-3.18/0051-rt5350-spi-second-device.patch b/target/linux/ramips/patches-3.18/0051-rt5350-spi-second-device.patch new file mode 100644 index 0000000..2da8151 --- /dev/null +++ b/target/linux/ramips/patches-3.18/0051-rt5350-spi-second-device.patch @@ -0,0 +1,368 @@ +From 27b11d4f1888e1a3d6d75b46d4d5a4d86fc03891 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Wed, 6 Aug 2014 10:53:40 +0200 +Subject: [PATCH 51/57] SPI: MIPS: ralink: add rt5350 dual SPI support + +Signed-off-by: John Crispin +Signed-off-by: Felix Fietkau +--- + drivers/spi/spi-rt2880.c | 218 +++++++++++++++++++++++++++++++++++++++++++--- + 1 file changed, 205 insertions(+), 13 deletions(-) + +--- a/drivers/spi/spi-rt2880.c ++++ b/drivers/spi/spi-rt2880.c +@@ -21,19 +21,25 @@ + #include + #include + #include ++#include + #include + ++#include ++ ++#define SPI_BPW_MASK(bits) BIT((bits) - 1) ++ + #define DRIVER_NAME "spi-rt2880" +-/* only one slave is supported*/ +-#define RALINK_NUM_CHIPSELECTS 1 + /* in usec */ + #define RALINK_SPI_WAIT_MAX_LOOP 2000 + +-#define RAMIPS_SPI_STAT 0x00 +-#define RAMIPS_SPI_CFG 0x10 +-#define RAMIPS_SPI_CTL 0x14 +-#define RAMIPS_SPI_DATA 0x20 +-#define RAMIPS_SPI_FIFO_STAT 0x38 ++#define RAMIPS_SPI_DEV_OFFSET 0x40 ++ ++#define RAMIPS_SPI_STAT(cs) (0x00 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_CFG(cs) (0x10 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_CTL(cs) (0x14 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_DATA(cs) (0x20 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_FIFO_STAT(cs) (0x38 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_ARBITER 0xF0 + + /* SPISTAT register bit field */ + #define SPISTAT_BUSY BIT(0) +@@ -63,6 +69,19 @@ + /* SPIFIFOSTAT register bit field */ + #define SPIFIFOSTAT_TXFULL BIT(17) + ++#define SPICTL_ARB_EN BIT(31) ++#define SPI1_POR BIT(1) ++#define SPI0_POR BIT(0) ++ ++#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH) ++ ++struct rt2880_spi; ++ ++struct rt2880_spi_ops { ++ void (*init_hw)(struct rt2880_spi *rs); ++ int num_cs; ++}; ++ + struct rt2880_spi { + struct spi_master *master; + void __iomem *base; +@@ -70,6 +89,8 @@ struct rt2880_spi { + unsigned int speed; + struct clk *clk; + spinlock_t lock; ++ ++ struct rt2880_spi_ops *ops; + }; + + static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi) +@@ -115,6 +136,7 @@ static inline void rt2880_spi_clrbits(st + + static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed) + { ++ int cs = spi->chip_select; + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + u32 rate; + u32 prescale; +@@ -142,9 +164,9 @@ static int rt2880_spi_baudrate_set(struc + prescale = ilog2(rate / 2); + dev_dbg(&spi->dev, "prescale:%u\n", prescale); + +- reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG); ++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs)); + reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale); +- rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg); ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg); + rs->speed = speed; + return 0; + } +@@ -157,7 +179,8 @@ rt2880_spi_setup_transfer(struct spi_dev + { + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + unsigned int speed = spi->max_speed_hz; +- int rc; ++ int rc, cs = spi->chip_select; ++ u32 reg; + + if ((t != NULL) && t->speed_hz) + speed = t->speed_hz; +@@ -169,25 +192,68 @@ rt2880_spi_setup_transfer(struct spi_dev + return rc; + } + ++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs)); ++ ++ reg = (reg & ~SPICFG_MSBFIRST); ++ if (!(spi->mode & SPI_LSB_FIRST)) ++ reg |= SPICFG_MSBFIRST; ++ ++ reg = (reg & ~(SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING |SPICFG_TXCLKEDGE_FALLING)); ++ switch(spi->mode & (SPI_CPOL | SPI_CPHA)) { ++ case SPI_MODE_0: ++ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_1: ++ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_2: ++ reg |= SPICFG_RXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_3: ++ reg |= SPICFG_TXCLKEDGE_FALLING; ++ break; ++ } ++ ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg); ++ ++ reg = SPICTL_ARB_EN; ++ if (spi->mode & SPI_CS_HIGH) { ++ switch(cs) { ++ case 0: ++ reg |= SPI0_POR; ++ break; ++ case 1: ++ reg |= SPI1_POR; ++ break; ++ } ++ } ++ ++ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER, reg); ++ + return 0; + } + +-static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable) ++static void rt2880_spi_set_cs(struct spi_device *spi, int enable) + { ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ int cs = spi->chip_select; ++ + if (enable) +- rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); ++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA); + else +- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA); + } + +-static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs) ++static inline int rt2880_spi_wait_till_ready(struct spi_device *spi) + { ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ int cs = spi->chip_select; + int i; + + for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) { + u32 status; + +- status = rt2880_spi_read(rs, RAMIPS_SPI_STAT); ++ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT(cs)); + if ((status & SPISTAT_BUSY) == 0) + return 0; + +@@ -199,9 +265,10 @@ static inline int rt2880_spi_wait_till_r + } + + static unsigned int +-rt2880_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) ++rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer) + { + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ int cs = spi->chip_select; + unsigned count = 0; + u8 *rx = xfer->rx_buf; + const u8 *tx = xfer->tx_buf; +@@ -213,9 +280,9 @@ rt2880_spi_write_read(struct spi_device + + if (tx) { + for (count = 0; count < xfer->len; count++) { +- rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]); +- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR); +- err = rt2880_spi_wait_till_ready(rs); ++ rt2880_spi_write(rs, RAMIPS_SPI_DATA(cs), tx[count]); ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTWR); ++ err = rt2880_spi_wait_till_ready(spi); + if (err) { + dev_err(&spi->dev, "TX failed, err=%d\n", err); + goto out; +@@ -225,13 +292,13 @@ rt2880_spi_write_read(struct spi_device + + if (rx) { + for (count = 0; count < xfer->len; count++) { +- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD); +- err = rt2880_spi_wait_till_ready(rs); ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTRD); ++ err = rt2880_spi_wait_till_ready(spi); + if (err) { + dev_err(&spi->dev, "RX failed, err=%d\n", err); + goto out; + } +- rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA); ++ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA(cs)); + } + } + +@@ -280,25 +347,25 @@ static int rt2880_spi_transfer_one_messa + } + + if (!cs_active) { +- rt2880_spi_set_cs(rs, 1); ++ rt2880_spi_set_cs(spi, 1); + cs_active = 1; + } + + if (t->len) +- m->actual_length += rt2880_spi_write_read(spi, t); ++ m->actual_length += rt2880_spi_write_read(spi, &m->transfers, t); + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (t->cs_change) { +- rt2880_spi_set_cs(rs, 0); ++ rt2880_spi_set_cs(spi, 0); + cs_active = 0; + } + } + + msg_done: + if (cs_active) +- rt2880_spi_set_cs(rs, 0); ++ rt2880_spi_set_cs(spi, 0); + + m->status = status; + spi_finalize_current_message(master); +@@ -311,7 +378,7 @@ static int rt2880_spi_setup(struct spi_d + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + + if ((spi->max_speed_hz == 0) || +- (spi->max_speed_hz > (rs->sys_freq / 2))) ++ (spi->max_speed_hz > (rs->sys_freq / 2))) + spi->max_speed_hz = (rs->sys_freq / 2); + + if (spi->max_speed_hz < (rs->sys_freq / 128)) { +@@ -328,14 +395,47 @@ static int rt2880_spi_setup(struct spi_d + + static void rt2880_spi_reset(struct rt2880_spi *rs) + { +- rt2880_spi_write(rs, RAMIPS_SPI_CFG, ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(0), + SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING | + SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL); +- rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA); ++ rt2880_spi_write(rs, RAMIPS_SPI_CTL(0), SPICTL_HIZSDO | SPICTL_SPIENA); + } + ++static void rt5350_spi_reset(struct rt2880_spi *rs) ++{ ++ int cs; ++ ++ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER, ++ SPICTL_ARB_EN); ++ ++ for (cs = 0; cs < rs->ops->num_cs; cs++) { ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), ++ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING | ++ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL); ++ rt2880_spi_write(rs, RAMIPS_SPI_CTL(cs), SPICTL_HIZSDO | SPICTL_SPIENA); ++ } ++} ++ ++static struct rt2880_spi_ops spi_ops[] = { ++ { ++ .init_hw = rt2880_spi_reset, ++ .num_cs = 1, ++ }, { ++ .init_hw = rt5350_spi_reset, ++ .num_cs = 2, ++ }, ++}; ++ ++static const struct of_device_id rt2880_spi_match[] = { ++ { .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]}, ++ { .compatible = "ralink,rt5350-spi", .data = &spi_ops[1]}, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rt2880_spi_match); ++ + static int rt2880_spi_probe(struct platform_device *pdev) + { ++ const struct of_device_id *match; + struct spi_master *master; + struct rt2880_spi *rs; + unsigned long flags; +@@ -343,6 +443,12 @@ static int rt2880_spi_probe(struct platf + struct resource *r; + int status = 0; + struct clk *clk; ++ struct rt2880_spi_ops *ops; ++ ++ match = of_match_device(rt2880_spi_match, &pdev->dev); ++ if (!match) ++ return -EINVAL; ++ ops = (struct rt2880_spi_ops *)match->data; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, r); +@@ -366,14 +472,13 @@ static int rt2880_spi_probe(struct platf + return -ENOMEM; + } + +- /* we support only mode 0, and no options */ +- master->mode_bits = 0; ++ master->mode_bits = RT2880_SPI_MODE_BITS; + + master->setup = rt2880_spi_setup; + master->transfer_one_message = rt2880_spi_transfer_one_message; +- master->num_chipselect = RALINK_NUM_CHIPSELECTS; + master->bits_per_word_mask = SPI_BPW_MASK(8); + master->dev.of_node = pdev->dev.of_node; ++ master->num_chipselect = ops->num_cs; + + dev_set_drvdata(&pdev->dev, master); + +@@ -382,12 +487,13 @@ static int rt2880_spi_probe(struct platf + rs->clk = clk; + rs->master = master; + rs->sys_freq = clk_get_rate(rs->clk); ++ rs->ops = ops; + dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq); + spin_lock_irqsave(&rs->lock, flags); + + device_reset(&pdev->dev); + +- rt2880_spi_reset(rs); ++ rs->ops->init_hw(rs); + + return spi_register_master(master); + } +@@ -408,12 +514,6 @@ static int rt2880_spi_remove(struct plat + + MODULE_ALIAS("platform:" DRIVER_NAME); + +-static const struct of_device_id rt2880_spi_match[] = { +- { .compatible = "ralink,rt2880-spi" }, +- {}, +-}; +-MODULE_DEVICE_TABLE(of, rt2880_spi_match); +- + static struct platform_driver rt2880_spi_driver = { + .driver = { + .name = DRIVER_NAME, -- cgit v1.2.3