From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001 From: James <> Date: Wed, 4 Nov 2015 11:49:21 +0000 Subject: trunk-47381 --- .../ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c | 1522 ++++++++++++++++++++ 1 file changed, 1522 insertions(+) create mode 100644 target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c (limited to 'target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c') diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c new file mode 100644 index 0000000..6c5bc19 --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c @@ -0,0 +1,1522 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +#include "mvOs.h" +#include "sflash/mvSFlash.h" +#include "sflash/mvSFlashSpec.h" +#include "spi/mvSpi.h" +#include "spi/mvSpiCmnd.h" +#include "ctrlEnv/mvCtrlEnvLib.h" + +/*#define MV_DEBUG*/ +#ifdef MV_DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + +/* Globals */ +static MV_SFLASH_DEVICE_PARAMS sflash[] = { + /* ST M25P32 SPI flash, 4MB, 64 sectors of 64K each */ + { + MV_M25P_WREN_CMND_OPCD, + MV_M25P_WRDI_CMND_OPCD, + MV_M25P_RDID_CMND_OPCD, + MV_M25P_RDSR_CMND_OPCD, + MV_M25P_WRSR_CMND_OPCD, + MV_M25P_READ_CMND_OPCD, + MV_M25P_FAST_RD_CMND_OPCD, + MV_M25P_PP_CMND_OPCD, + MV_M25P_SE_CMND_OPCD, + MV_M25P_BE_CMND_OPCD, + MV_M25P_RES_CMND_OPCD, + MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */ + MV_M25P32_SECTOR_SIZE, + MV_M25P32_SECTOR_NUMBER, + MV_M25P_PAGE_SIZE, + "ST M25P32", + MV_M25PXXX_ST_MANF_ID, + MV_M25P32_DEVICE_ID, + MV_M25P32_MAX_SPI_FREQ, + MV_M25P32_MAX_FAST_SPI_FREQ, + MV_M25P32_FAST_READ_DUMMY_BYTES + }, + /* ST M25P64 SPI flash, 8MB, 128 sectors of 64K each */ + { + MV_M25P_WREN_CMND_OPCD, + MV_M25P_WRDI_CMND_OPCD, + MV_M25P_RDID_CMND_OPCD, + MV_M25P_RDSR_CMND_OPCD, + MV_M25P_WRSR_CMND_OPCD, + MV_M25P_READ_CMND_OPCD, + MV_M25P_FAST_RD_CMND_OPCD, + MV_M25P_PP_CMND_OPCD, + MV_M25P_SE_CMND_OPCD, + MV_M25P_BE_CMND_OPCD, + MV_M25P_RES_CMND_OPCD, + MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */ + MV_M25P64_SECTOR_SIZE, + MV_M25P64_SECTOR_NUMBER, + MV_M25P_PAGE_SIZE, + "ST M25P64", + MV_M25PXXX_ST_MANF_ID, + MV_M25P64_DEVICE_ID, + MV_M25P64_MAX_SPI_FREQ, + MV_M25P64_MAX_FAST_SPI_FREQ, + MV_M25P64_FAST_READ_DUMMY_BYTES + }, + /* ST M25P128 SPI flash, 16MB, 64 sectors of 256K each */ + { + MV_M25P_WREN_CMND_OPCD, + MV_M25P_WRDI_CMND_OPCD, + MV_M25P_RDID_CMND_OPCD, + MV_M25P_RDSR_CMND_OPCD, + MV_M25P_WRSR_CMND_OPCD, + MV_M25P_READ_CMND_OPCD, + MV_M25P_FAST_RD_CMND_OPCD, + MV_M25P_PP_CMND_OPCD, + MV_M25P_SE_CMND_OPCD, + MV_M25P_BE_CMND_OPCD, + MV_M25P_RES_CMND_OPCD, + MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */ + MV_M25P128_SECTOR_SIZE, + MV_M25P128_SECTOR_NUMBER, + MV_M25P_PAGE_SIZE, + "ST M25P128", + MV_M25PXXX_ST_MANF_ID, + MV_M25P128_DEVICE_ID, + MV_M25P128_MAX_SPI_FREQ, + MV_M25P128_MAX_FAST_SPI_FREQ, + MV_M25P128_FAST_READ_DUMMY_BYTES + }, + /* Macronix MXIC MX25L6405 SPI flash, 8MB, 128 sectors of 64K each */ + { + MV_MX25L_WREN_CMND_OPCD, + MV_MX25L_WRDI_CMND_OPCD, + MV_MX25L_RDID_CMND_OPCD, + MV_MX25L_RDSR_CMND_OPCD, + MV_MX25L_WRSR_CMND_OPCD, + MV_MX25L_READ_CMND_OPCD, + MV_MX25L_FAST_RD_CMND_OPCD, + MV_MX25L_PP_CMND_OPCD, + MV_MX25L_SE_CMND_OPCD, + MV_MX25L_BE_CMND_OPCD, + MV_MX25L_RES_CMND_OPCD, + MV_MX25L_DP_CMND_OPCD, + MV_MX25L6405_SECTOR_SIZE, + MV_MX25L6405_SECTOR_NUMBER, + MV_MXIC_PAGE_SIZE, + "MXIC MX25L6405", + MV_MXIC_MANF_ID, + MV_MX25L6405_DEVICE_ID, + MV_MX25L6405_MAX_SPI_FREQ, + MV_MX25L6405_MAX_FAST_SPI_FREQ, + MV_MX25L6405_FAST_READ_DUMMY_BYTES + }, + /* SPANSION S25FL128P SPI flash, 16MB, 64 sectors of 256K each */ + { + MV_S25FL_WREN_CMND_OPCD, + MV_S25FL_WRDI_CMND_OPCD, + MV_S25FL_RDID_CMND_OPCD, + MV_S25FL_RDSR_CMND_OPCD, + MV_S25FL_WRSR_CMND_OPCD, + MV_S25FL_READ_CMND_OPCD, + MV_S25FL_FAST_RD_CMND_OPCD, + MV_S25FL_PP_CMND_OPCD, + MV_S25FL_SE_CMND_OPCD, + MV_S25FL_BE_CMND_OPCD, + MV_S25FL_RES_CMND_OPCD, + MV_S25FL_DP_CMND_OPCD, + MV_S25FL128_SECTOR_SIZE, + MV_S25FL128_SECTOR_NUMBER, + MV_S25FL_PAGE_SIZE, + "SPANSION S25FL128", + MV_SPANSION_MANF_ID, + MV_S25FL128_DEVICE_ID, + MV_S25FL128_MAX_SPI_FREQ, + MV_M25P128_MAX_FAST_SPI_FREQ, + MV_M25P128_FAST_READ_DUMMY_BYTES + } +}; + +/* Static Functions */ +static MV_STATUS mvWriteEnable (MV_SFLASH_INFO * pFlinfo); +static MV_STATUS mvStatusRegGet (MV_SFLASH_INFO * pFlinfo, MV_U8 * pStatReg); +static MV_STATUS mvStatusRegSet (MV_SFLASH_INFO * pFlinfo, MV_U8 sr); +static MV_STATUS mvWaitOnWipClear(MV_SFLASH_INFO * pFlinfo); +static MV_STATUS mvSFlashPageWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, \ + MV_U8* pPageBuff, MV_U32 buffSize); +static MV_STATUS mvSFlashWithDefaultsIdGet (MV_SFLASH_INFO * pFlinfo, \ + MV_U8* manId, MV_U16* devId); + +/******************************************************************************* +* mvWriteEnable - serialize the write enable sequence +* +* DESCRIPTION: +* transmit the sequence for write enable +* +********************************************************************************/ +static MV_STATUS mvWriteEnable(MV_SFLASH_INFO * pFlinfo) +{ + MV_U8 cmd[MV_SFLASH_WREN_CMND_LENGTH]; + + + cmd[0] = sflash[pFlinfo->index].opcdWREN; + + return mvSpiWriteThenRead(cmd, MV_SFLASH_WREN_CMND_LENGTH, NULL, 0, 0); +} + +/******************************************************************************* +* mvStatusRegGet - Retrieve the value of the status register +* +* DESCRIPTION: +* perform the RDSR sequence to get the 8bit status register +* +********************************************************************************/ +static MV_STATUS mvStatusRegGet(MV_SFLASH_INFO * pFlinfo, MV_U8 * pStatReg) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_RDSR_CMND_LENGTH]; + MV_U8 sr[MV_SFLASH_RDSR_REPLY_LENGTH]; + + + + + cmd[0] = sflash[pFlinfo->index].opcdRDSR; + + if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_RDSR_CMND_LENGTH, sr, + MV_SFLASH_RDSR_REPLY_LENGTH,0)) != MV_OK) + return ret; + + *pStatReg = sr[0]; + + return MV_OK; +} + +/******************************************************************************* +* mvWaitOnWipClear - Block waiting for the WIP (write in progress) to be cleared +* +* DESCRIPTION: +* Block waiting for the WIP (write in progress) to be cleared +* +********************************************************************************/ +static MV_STATUS mvWaitOnWipClear(MV_SFLASH_INFO * pFlinfo) +{ + MV_STATUS ret; + MV_U32 i; + MV_U8 stat; + + for (i=0; iindex].opcdWRSR; + cmd[1] = sr; + + if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_WRSR_CMND_LENGTH, NULL, 0, 0)) != MV_OK) + return ret; + + if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK) + return ret; + + mvOsDelay(1); + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashPageWr - Write up to 256 Bytes in the same page +* +* DESCRIPTION: +* Write a buffer up to the page size in length provided that the whole address +* range is within the same page (alligned to page bounderies) +* +*******************************************************************************/ +static MV_STATUS mvSFlashPageWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, + MV_U8* pPageBuff, MV_U32 buffSize) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_PP_CMND_LENGTH]; + + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invalid parameter device index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* check that we do not cross the page bounderies */ + if (((offset & (sflash[pFlinfo->index].pageSize - 1)) + buffSize) > + sflash[pFlinfo->index].pageSize) + { + DB(mvOsPrintf("%s WARNING: Page allignment problem!\n", __FUNCTION__);) + return MV_OUT_OF_RANGE; + } + + /* Issue the Write enable command prior the page program command */ + if ((ret = mvWriteEnable(pFlinfo)) != MV_OK) + return ret; + + cmd[0] = sflash[pFlinfo->index].opcdPP; + cmd[1] = ((offset >> 16) & 0xFF); + cmd[2] = ((offset >> 8) & 0xFF); + cmd[3] = (offset & 0xFF); + + if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_PP_CMND_LENGTH, pPageBuff, buffSize)) != MV_OK) + return ret; + + if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK) + return ret; + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashWithDefaultsIdGet - Try to read the manufacturer and Device IDs from +* the device using the default RDID opcode and the default WREN opcode. +* +* DESCRIPTION: +* This is used to detect a generic device that uses the default opcodes +* for the WREN and RDID. +* +********************************************************************************/ +static MV_STATUS mvSFlashWithDefaultsIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* manId, MV_U16* devId) +{ + MV_STATUS ret; + MV_U8 cmdRDID[MV_SFLASH_RDID_CMND_LENGTH]; + MV_U8 id[MV_SFLASH_RDID_REPLY_LENGTH]; + + + + /* Use the default RDID opcode to read the IDs */ + cmdRDID[0] = MV_SFLASH_DEFAULT_RDID_OPCD; /* unknown model try default */ + if ((ret = mvSpiWriteThenRead(cmdRDID, MV_SFLASH_RDID_CMND_LENGTH, id, MV_SFLASH_RDID_REPLY_LENGTH, 0)) != MV_OK) + return ret; + + *manId = id[0]; + *devId = 0; + *devId |= (id[1] << 8); + *devId |= id[2]; + + return MV_OK; +} + +/* +##################################################################################### +##################################################################################### +*/ + +/******************************************************************************* +* mvSFlashInit - Initialize the serial flash device +* +* DESCRIPTION: +* Perform the neccessary initialization and configuration +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* pFlinfo->baseAddr: base address in fast mode. +* pFlinfo->index: Index of the flash in the sflash tabel. If the SPI +* flash device does not support read Id command with +* the standard opcode, then the user should supply this +* as an input to skip the autodetection process!!!! +* +* OUTPUT: +* pFlinfo: pointer to the Flash information structure after detection +* pFlinfo->manufacturerId: Manufacturer ID +* pFlinfo->deviceId: Device ID +* pFlinfo->sectorSize: size of the sector (all sectors are the same). +* pFlinfo->sectorNumber: number of sectors. +* pFlinfo->pageSize: size of the page. +* pFlinfo->index: Index of the detected flash in the sflash tabel +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashInit (MV_SFLASH_INFO * pFlinfo) +{ + MV_STATUS ret; + MV_U8 manf; + MV_U16 dev; + MV_U32 indx; + MV_BOOL detectFlag = MV_FALSE; + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Initialize the SPI interface with low frequency to make sure that the read ID succeeds */ + if ((ret = mvSpiInit(MV_SFLASH_BASIC_SPI_FREQ)) != MV_OK) + { + mvOsPrintf("%s ERROR: Failed to initialize the SPI interface!\n", __FUNCTION__); + return ret; + } + + /* First try to read the Manufacturer and Device IDs */ + if ((ret = mvSFlashIdGet(pFlinfo, &manf, &dev)) != MV_OK) + { + mvOsPrintf("%s ERROR: Failed to get the SFlash ID!\n", __FUNCTION__); + return ret; + } + + /* loop over the whole table and look for the appropriate SFLASH */ + for (indx=0; indxmanufacturerId = manf; + pFlinfo->deviceId = dev; + pFlinfo->index = indx; + detectFlag = MV_TRUE; + } + } + + if(!detectFlag) + { + mvOsPrintf("%s ERROR: Unknown SPI flash device!\n", __FUNCTION__); + return MV_FAIL; + } + + /* fill the info based on the model detected */ + pFlinfo->sectorSize = sflash[pFlinfo->index].sectorSize; + pFlinfo->sectorNumber = sflash[pFlinfo->index].sectorNumber; + pFlinfo->pageSize = sflash[pFlinfo->index].pageSize; + + /* Set the SPI frequency to the MAX allowed for the device for best performance */ + if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFreq)) != MV_OK) + { + mvOsPrintf("%s ERROR: Failed to set the SPI frequency!\n", __FUNCTION__); + return ret; + } + + /* As default lock the SR */ + if ((ret = mvSFlashStatRegLock(pFlinfo, MV_TRUE)) != MV_OK) + return ret; + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashSectorErase - Erasse a single sector of the serial flash +* +* DESCRIPTION: +* Issue the erase sector command and address +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* secNumber: sector Number to erase (0 -> (sectorNumber-1)) +* +* OUTPUT: +* None +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashSectorErase (MV_SFLASH_INFO * pFlinfo, MV_U32 secNumber) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_SE_CMND_LENGTH]; + + MV_U32 secAddr = (secNumber * pFlinfo->sectorSize); +#if 0 + MV_U32 i; + MV_U32 * pW = (MV_U32*) (secAddr + pFlinfo->baseAddr); + MV_U32 erasedWord = 0xFFFFFFFF; + MV_U32 wordsPerSector = (pFlinfo->sectorSize / sizeof(MV_U32)); + MV_BOOL eraseNeeded = MV_FALSE; +#endif + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* check that the sector number is valid */ + if (secNumber >= pFlinfo->sectorNumber) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter sector number!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* we don't want to access SPI in direct mode from in-direct API, + becasue of timing issue between CS asserts. */ +#if 0 + /* First compare to FF and check if erase is needed */ + for (i=0; iindex].opcdSE; + cmd[1] = ((secAddr >> 16) & 0xFF); + cmd[2] = ((secAddr >> 8) & 0xFF); + cmd[3] = (secAddr & 0xFF); + + /* Issue the Write enable command prior the sector erase command */ + if ((ret = mvWriteEnable(pFlinfo)) != MV_OK) + return ret; + + if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_SE_CMND_LENGTH, NULL, 0)) != MV_OK) + return ret; + + if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK) + return ret; + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashChipErase - Erasse the whole serial flash +* +* DESCRIPTION: +* Issue the bulk (chip) erase command +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* +* OUTPUT: +* None +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashChipErase (MV_SFLASH_INFO * pFlinfo) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_BE_CMND_LENGTH]; + + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + cmd[0] = sflash[pFlinfo->index].opcdBE; + + /* Issue the Write enable command prior the Bulk erase command */ + if ((ret = mvWriteEnable(pFlinfo)) != MV_OK) + return ret; + + if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_BE_CMND_LENGTH, NULL, 0)) != MV_OK) + return ret; + + if ((ret = mvWaitOnChipEraseDone(pFlinfo)) != MV_OK) + return ret; + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashBlockRd - Read from the serial flash +* +* DESCRIPTION: +* Issue the read command and address then perfom the needed read +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* offset: byte offset with the flash to start reading from +* pReadBuff: pointer to the buffer to read the data in +* buffSize: size of the buffer to read. +* +* OUTPUT: +* pReadBuff: pointer to the buffer containing the read data +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, + MV_U8* pReadBuff, MV_U32 buffSize) +{ + MV_U8 cmd[MV_SFLASH_READ_CMND_LENGTH]; + + + /* check for NULL pointer */ + if ((pFlinfo == NULL) || (pReadBuff == NULL)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + cmd[0] = sflash[pFlinfo->index].opcdREAD; + cmd[1] = ((offset >> 16) & 0xFF); + cmd[2] = ((offset >> 8) & 0xFF); + cmd[3] = (offset & 0xFF); + + return mvSpiWriteThenRead(cmd, MV_SFLASH_READ_CMND_LENGTH, pReadBuff, buffSize, 0); +} + +/******************************************************************************* +* mvSFlashFastBlockRd - Fast read from the serial flash +* +* DESCRIPTION: +* Issue the fast read command and address then perfom the needed read +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* offset: byte offset with the flash to start reading from +* pReadBuff: pointer to the buffer to read the data in +* buffSize: size of the buffer to read. +* +* OUTPUT: +* pReadBuff: pointer to the buffer containing the read data +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashFastBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, + MV_U8* pReadBuff, MV_U32 buffSize) +{ + MV_U8 cmd[MV_SFLASH_READ_CMND_LENGTH]; + MV_STATUS ret; + + /* check for NULL pointer */ + if ((pFlinfo == NULL) || (pReadBuff == NULL)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* Set the SPI frequency to the MAX allowed for fast-read operations */ + mvOsPrintf("Setting freq to %d.\n",sflash[pFlinfo->index].spiMaxFastFreq); + if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFastFreq)) != MV_OK) + { + mvOsPrintf("%s ERROR: Failed to set the SPI fast frequency!\n", __FUNCTION__); + return ret; + } + + cmd[0] = sflash[pFlinfo->index].opcdFSTRD; + cmd[1] = ((offset >> 16) & 0xFF); + cmd[2] = ((offset >> 8) & 0xFF); + cmd[3] = (offset & 0xFF); + + + ret = mvSpiWriteThenRead(cmd, MV_SFLASH_READ_CMND_LENGTH, pReadBuff, buffSize, + sflash[pFlinfo->index].spiFastRdDummyBytes); + + /* Reset the SPI frequency to the MAX allowed for the device for best performance */ + if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFreq)) != MV_OK) + { + mvOsPrintf("%s ERROR: Failed to set the SPI frequency!\n", __FUNCTION__); + return ret; + } + + return ret; +} + + +/******************************************************************************* +* mvSFlashBlockWr - Write a buffer with any size +* +* DESCRIPTION: +* write regardless of the page boundaries and size limit per Page +* program command +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* offset: byte offset within the flash region +* pWriteBuff: pointer to the buffer holding the data to program +* buffSize: size of the buffer to write +* +* OUTPUT: +* None +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashBlockWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, + MV_U8* pWriteBuff, MV_U32 buffSize) +{ + MV_STATUS ret; + MV_U32 data2write = buffSize; + MV_U32 preAllOffset = (offset & MV_SFLASH_PAGE_ALLIGN_MASK(MV_M25P_PAGE_SIZE)); + MV_U32 preAllSz = (preAllOffset ? (MV_M25P_PAGE_SIZE - preAllOffset) : 0); + MV_U32 writeOffset = offset; + + /* check for NULL pointer */ +#ifndef CONFIG_MARVELL + if(NULL == pWriteBuff) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } +#endif + + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* check that the buffer size does not exceed the flash size */ + if ((offset + buffSize) > mvSFlashSizeGet(pFlinfo)) + { + DB(mvOsPrintf("%s WARNING: Write exceeds flash size!\n", __FUNCTION__);) + return MV_OUT_OF_RANGE; + } + + /* check if the total block size is less than the first chunk remainder */ + if (data2write < preAllSz) + preAllSz = data2write; + + /* check if programing does not start at a 64byte alligned offset */ + if (preAllSz) + { + if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, preAllSz)) != MV_OK) + return ret; + + /* increment pointers and counters */ + writeOffset += preAllSz; + data2write -= preAllSz; + pWriteBuff += preAllSz; + } + + /* program the data that fits in complete page chunks */ + while (data2write >= sflash[pFlinfo->index].pageSize) + { + if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, sflash[pFlinfo->index].pageSize)) != MV_OK) + return ret; + + /* increment pointers and counters */ + writeOffset += sflash[pFlinfo->index].pageSize; + data2write -= sflash[pFlinfo->index].pageSize; + pWriteBuff += sflash[pFlinfo->index].pageSize; + } + + /* program the last partial chunk */ + if (data2write) + { + if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, data2write)) != MV_OK) + return ret; + } + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashIdGet - Get the manufacturer and device IDs. +* +* DESCRIPTION: +* Get the Manufacturer and device IDs from the serial flash through +* writing the RDID command then reading 3 bytes of data. In case that +* this command was called for the first time in order to detect the +* manufacturer and device IDs, then the default RDID opcode will be used +* unless the device index is indicated by the user (in case the SPI flash +* does not use the default RDID opcode). +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* pManId: pointer to the 8bit variable to hold the manufacturing ID +* pDevId: pointer to the 16bit variable to hold the device ID +* +* OUTPUT: +* pManId: pointer to the 8bit variable holding the manufacturing ID +* pDevId: pointer to the 16bit variable holding the device ID +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* pManId, MV_U16* pDevId) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_RDID_CMND_LENGTH]; + MV_U8 id[MV_SFLASH_RDID_REPLY_LENGTH]; + + + + /* check for NULL pointer */ + if ((pFlinfo == NULL) || (pManId == NULL) || (pDevId == NULL)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + return mvSFlashWithDefaultsIdGet(pFlinfo, pManId, pDevId); + else + cmd[0] = sflash[pFlinfo->index].opcdRDID; + + if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_RDID_CMND_LENGTH, id, MV_SFLASH_RDID_REPLY_LENGTH, 0)) != MV_OK) + return ret; + + *pManId = id[0]; + *pDevId = 0; + *pDevId |= (id[1] << 8); + *pDevId |= id[2]; + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashWpRegionSet - Set the Write-Protected region +* +* DESCRIPTION: +* Set the Write-Protected region +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* wpRegion: which region will be protected +* +* OUTPUT: +* None +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashWpRegionSet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION wpRegion) +{ + MV_U8 wpMask; + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* Check if the chip is an ST flash; then WP supports only 3 bits */ + if (pFlinfo->manufacturerId == MV_M25PXXX_ST_MANF_ID) + { + switch (wpRegion) + { + case MV_WP_NONE: + wpMask = MV_M25P_STATUS_BP_NONE; + break; + + case MV_WP_UPR_1OF128: + DB(mvOsPrintf("%s WARNING: Invaild option for this flash chip!\n", __FUNCTION__);) + return MV_NOT_SUPPORTED; + + case MV_WP_UPR_1OF64: + wpMask = MV_M25P_STATUS_BP_1_OF_64; + break; + + case MV_WP_UPR_1OF32: + wpMask = MV_M25P_STATUS_BP_1_OF_32; + break; + + case MV_WP_UPR_1OF16: + wpMask = MV_M25P_STATUS_BP_1_OF_16; + break; + + case MV_WP_UPR_1OF8: + wpMask = MV_M25P_STATUS_BP_1_OF_8; + break; + + case MV_WP_UPR_1OF4: + wpMask = MV_M25P_STATUS_BP_1_OF_4; + break; + + case MV_WP_UPR_1OF2: + wpMask = MV_M25P_STATUS_BP_1_OF_2; + break; + + case MV_WP_ALL: + wpMask = MV_M25P_STATUS_BP_ALL; + break; + + default: + DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + } + /* check if the manufacturer is MXIC then the WP is 4bits */ + else if (pFlinfo->manufacturerId == MV_MXIC_MANF_ID) + { + switch (wpRegion) + { + case MV_WP_NONE: + wpMask = MV_MX25L_STATUS_BP_NONE; + break; + + case MV_WP_UPR_1OF128: + wpMask = MV_MX25L_STATUS_BP_1_OF_128; + break; + + case MV_WP_UPR_1OF64: + wpMask = MV_MX25L_STATUS_BP_1_OF_64; + break; + + case MV_WP_UPR_1OF32: + wpMask = MV_MX25L_STATUS_BP_1_OF_32; + break; + + case MV_WP_UPR_1OF16: + wpMask = MV_MX25L_STATUS_BP_1_OF_16; + break; + + case MV_WP_UPR_1OF8: + wpMask = MV_MX25L_STATUS_BP_1_OF_8; + break; + + case MV_WP_UPR_1OF4: + wpMask = MV_MX25L_STATUS_BP_1_OF_4; + break; + + case MV_WP_UPR_1OF2: + wpMask = MV_MX25L_STATUS_BP_1_OF_2; + break; + + case MV_WP_ALL: + wpMask = MV_MX25L_STATUS_BP_ALL; + break; + + default: + DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + } + /* check if the manufacturer is SPANSION then the WP is 4bits */ + else if (pFlinfo->manufacturerId == MV_SPANSION_MANF_ID) + { + switch (wpRegion) + { + case MV_WP_NONE: + wpMask = MV_S25FL_STATUS_BP_NONE; + break; + + case MV_WP_UPR_1OF128: + DB(mvOsPrintf("%s WARNING: Invaild option for this flash chip!\n", __FUNCTION__);) + return MV_NOT_SUPPORTED; + + case MV_WP_UPR_1OF64: + wpMask = MV_S25FL_STATUS_BP_1_OF_64; + break; + + case MV_WP_UPR_1OF32: + wpMask = MV_S25FL_STATUS_BP_1_OF_32; + break; + + case MV_WP_UPR_1OF16: + wpMask = MV_S25FL_STATUS_BP_1_OF_16; + break; + + case MV_WP_UPR_1OF8: + wpMask = MV_S25FL_STATUS_BP_1_OF_8; + break; + + case MV_WP_UPR_1OF4: + wpMask = MV_S25FL_STATUS_BP_1_OF_4; + break; + + case MV_WP_UPR_1OF2: + wpMask = MV_S25FL_STATUS_BP_1_OF_2; + break; + + case MV_WP_ALL: + wpMask = MV_S25FL_STATUS_BP_ALL; + break; + + + default: + DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + } + else + { + DB(mvOsPrintf("%s WARNING: Invaild parameter Manufacturer ID!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* Verify that the SRWD bit is always set - register is s/w locked */ + wpMask |= MV_SFLASH_STATUS_REG_SRWD_MASK; + + return mvStatusRegSet(pFlinfo, wpMask); +} + +/******************************************************************************* +* mvSFlashWpRegionGet - Get the Write-Protected region configured +* +* DESCRIPTION: +* Get from the chip the Write-Protected region configured +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* pWpRegion: pointer to the variable to return the WP region in +* +* OUTPUT: +* wpRegion: pointer to the variable holding the WP region configured +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashWpRegionGet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION * pWpRegion) +{ + MV_STATUS ret; + MV_U8 reg; + + /* check for NULL pointer */ + if ((pFlinfo == NULL) || (pWpRegion == NULL)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + if ((ret = mvStatusRegGet(pFlinfo, ®)) != MV_OK) + return ret; + + /* Check if the chip is an ST flash; then WP supports only 3 bits */ + if (pFlinfo->manufacturerId == MV_M25PXXX_ST_MANF_ID) + { + switch ((reg & MV_M25P_STATUS_REG_WP_MASK)) + { + case MV_M25P_STATUS_BP_NONE: + *pWpRegion = MV_WP_NONE; + break; + + case MV_M25P_STATUS_BP_1_OF_64: + *pWpRegion = MV_WP_UPR_1OF64; + break; + + case MV_M25P_STATUS_BP_1_OF_32: + *pWpRegion = MV_WP_UPR_1OF32; + break; + + case MV_M25P_STATUS_BP_1_OF_16: + *pWpRegion = MV_WP_UPR_1OF16; + break; + + case MV_M25P_STATUS_BP_1_OF_8: + *pWpRegion = MV_WP_UPR_1OF8; + break; + + case MV_M25P_STATUS_BP_1_OF_4: + *pWpRegion = MV_WP_UPR_1OF4; + break; + + case MV_M25P_STATUS_BP_1_OF_2: + *pWpRegion = MV_WP_UPR_1OF2; + break; + + case MV_M25P_STATUS_BP_ALL: + *pWpRegion = MV_WP_ALL; + break; + + default: + DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);) + return MV_BAD_VALUE; + } + } + /* check if the manufacturer is MXIC then the WP is 4bits */ + else if (pFlinfo->manufacturerId == MV_MXIC_MANF_ID) + { + switch ((reg & MV_MX25L_STATUS_REG_WP_MASK)) + { + case MV_MX25L_STATUS_BP_NONE: + *pWpRegion = MV_WP_NONE; + break; + + case MV_MX25L_STATUS_BP_1_OF_128: + *pWpRegion = MV_WP_UPR_1OF128; + break; + + case MV_MX25L_STATUS_BP_1_OF_64: + *pWpRegion = MV_WP_UPR_1OF64; + break; + + case MV_MX25L_STATUS_BP_1_OF_32: + *pWpRegion = MV_WP_UPR_1OF32; + break; + + case MV_MX25L_STATUS_BP_1_OF_16: + *pWpRegion = MV_WP_UPR_1OF16; + break; + + case MV_MX25L_STATUS_BP_1_OF_8: + *pWpRegion = MV_WP_UPR_1OF8; + break; + + case MV_MX25L_STATUS_BP_1_OF_4: + *pWpRegion = MV_WP_UPR_1OF4; + break; + + case MV_MX25L_STATUS_BP_1_OF_2: + *pWpRegion = MV_WP_UPR_1OF2; + break; + + case MV_MX25L_STATUS_BP_ALL: + *pWpRegion = MV_WP_ALL; + break; + + default: + DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);) + return MV_BAD_VALUE; + } + } + /* Check if the chip is an SPANSION flash; then WP supports only 3 bits */ + else if (pFlinfo->manufacturerId == MV_SPANSION_MANF_ID) + { + switch ((reg & MV_S25FL_STATUS_REG_WP_MASK)) + { + case MV_S25FL_STATUS_BP_NONE: + *pWpRegion = MV_WP_NONE; + break; + + case MV_S25FL_STATUS_BP_1_OF_64: + *pWpRegion = MV_WP_UPR_1OF64; + break; + + case MV_S25FL_STATUS_BP_1_OF_32: + *pWpRegion = MV_WP_UPR_1OF32; + break; + + case MV_S25FL_STATUS_BP_1_OF_16: + *pWpRegion = MV_WP_UPR_1OF16; + break; + + case MV_S25FL_STATUS_BP_1_OF_8: + *pWpRegion = MV_WP_UPR_1OF8; + break; + + case MV_S25FL_STATUS_BP_1_OF_4: + *pWpRegion = MV_WP_UPR_1OF4; + break; + + case MV_S25FL_STATUS_BP_1_OF_2: + *pWpRegion = MV_WP_UPR_1OF2; + break; + + case MV_S25FL_STATUS_BP_ALL: + *pWpRegion = MV_WP_ALL; + break; + + default: + DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);) + return MV_BAD_VALUE; + } + } + else + { + DB(mvOsPrintf("%s WARNING: Invaild parameter Manufacturer ID!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashStatRegLock - Lock the status register for writing - W/Vpp +* pin should be low to take effect +* +* DESCRIPTION: +* Lock the access to the Status Register for writing. This will +* cause the flash to enter the hardware protection mode if the W/Vpp +* is low. If the W/Vpp is hi, the chip will be in soft protection mode, but +* the register will continue to be writable if WREN sequence was used. +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* srLock: enable/disable (MV_TRUE/MV_FALSE) status registor lock mechanism +* +* OUTPUT: +* None +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashStatRegLock (MV_SFLASH_INFO * pFlinfo, MV_BOOL srLock) +{ + MV_STATUS ret; + MV_U8 reg; + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + if ((ret = mvStatusRegGet(pFlinfo, ®)) != MV_OK) + return ret; + + if (srLock) + reg |= MV_SFLASH_STATUS_REG_SRWD_MASK; + else + reg &= ~MV_SFLASH_STATUS_REG_SRWD_MASK; + + return mvStatusRegSet(pFlinfo, reg); +} + +/******************************************************************************* +* mvSFlashSizeGet - Get the size of the SPI flash +* +* DESCRIPTION: +* based on the sector number and size of each sector calculate the total +* size of the flash memory. +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* +* OUTPUT: +* None. +* +* RETURN: +* Size of the flash in bytes. +* +* +*******************************************************************************/ +MV_U32 mvSFlashSizeGet (MV_SFLASH_INFO * pFlinfo) +{ + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return 0; + } + + return (pFlinfo->sectorSize * pFlinfo->sectorNumber); +} + +/******************************************************************************* +* mvSFlashPowerSaveEnter - Cause the falsh device to go into power save mode +* +* DESCRIPTION: +* Enter a special power save mode. +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* +* OUTPUT: +* None. +* +* RETURN: +* Size of the flash in bytes. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashPowerSaveEnter(MV_SFLASH_INFO * pFlinfo) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_DP_CMND_LENGTH]; + + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return 0; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* check that power save mode is supported in the specific device */ + if (sflash[pFlinfo->index].opcdPwrSave == MV_SFLASH_NO_SPECIFIC_OPCD) + { + DB(mvOsPrintf("%s WARNING: Power save not supported for this device!\n", __FUNCTION__);) + return MV_NOT_SUPPORTED; + } + + cmd[0] = sflash[pFlinfo->index].opcdPwrSave; + + if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_DP_CMND_LENGTH, NULL, 0)) != MV_OK) + return ret; + + return MV_OK; + +} + +/******************************************************************************* +* mvSFlashPowerSaveExit - Cause the falsh device to exit the power save mode +* +* DESCRIPTION: +* Exit the deep power save mode. +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* +* OUTPUT: +* None. +* +* RETURN: +* Size of the flash in bytes. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashPowerSaveExit (MV_SFLASH_INFO * pFlinfo) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_RES_CMND_LENGTH]; + + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return 0; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* check that power save mode is supported in the specific device */ + if (sflash[pFlinfo->index].opcdRES == MV_SFLASH_NO_SPECIFIC_OPCD) + { + DB(mvOsPrintf("%s WARNING: Read Electronic Signature not supported for this device!\n", __FUNCTION__);) + return MV_NOT_SUPPORTED; + } + + cmd[0] = sflash[pFlinfo->index].opcdRES; + + if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_RES_CMND_LENGTH, NULL, 0)) != MV_OK) + return ret; + + /* add the delay needed for the device to wake up */ + mvOsDelay(MV_MXIC_DP_EXIT_DELAY); /* 30 ms */ + + return MV_OK; + +} + +/******************************************************************************* +* mvSFlashModelGet - Retreive the string with the device manufacturer and model +* +* DESCRIPTION: +* Retreive the string with the device manufacturer and model +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* +* OUTPUT: +* None. +* +* RETURN: +* pointer to the string indicating the device manufacturer and model +* +* +*******************************************************************************/ +const MV_8 * mvSFlashModelGet (MV_SFLASH_INFO * pFlinfo) +{ + static const MV_8 * unknModel = (const MV_8 *)"Unknown"; + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return 0; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return unknModel; + } + + return sflash[pFlinfo->index].deviceModel; +} + -- cgit v1.2.3