From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001
From: James <>
Date: Wed, 4 Nov 2015 11:49:21 +0000
Subject: trunk-47381

---
 .../brcm63xx/patches-3.18/535-board_rta770w.patch  | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 target/linux/brcm63xx/patches-3.18/535-board_rta770w.patch

(limited to 'target/linux/brcm63xx/patches-3.18/535-board_rta770w.patch')

diff --git a/target/linux/brcm63xx/patches-3.18/535-board_rta770w.patch b/target/linux/brcm63xx/patches-3.18/535-board_rta770w.patch
new file mode 100644
index 0000000..0697299
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/535-board_rta770w.patch
@@ -0,0 +1,46 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -545,6 +545,27 @@ static struct board_info __initdata boar
+ 		.force_duplex_full	= 1,
+ 	},
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++	.name				= "RTA770W",
++	.expected_cpu_id		= 0x6345,
++
++	.has_uart0			= 1,
++
++	.has_enet0			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++};
+ #endif /* CONFIG_BCM63XX_CPU_6345 */
+ 
+ /*
+@@ -1796,6 +1817,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6345
+ 	&board_96345gw2,
+ 	&board_rta770bw,
++	&board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+ 	&board_96348r,
+@@ -1870,6 +1892,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6345
+ 	{ .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
+ 	{ .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
++	{ .compatible = "dynalink,rta770w", .data = &board_rta770w, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+ 	{ .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },
-- 
cgit v1.2.3