From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001 From: James <> Date: Wed, 4 Nov 2015 11:49:21 +0000 Subject: trunk-47381 --- .../files-3.18/drivers/usb/host/adm5120-q.c | 964 +++++++++++++++++++++ 1 file changed, 964 insertions(+) create mode 100644 target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-q.c (limited to 'target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-q.c') diff --git a/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-q.c b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-q.c new file mode 100644 index 0000000..cd9c892 --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-q.c @@ -0,0 +1,964 @@ +/* + * ADM5120 HCD (Host Controller Driver) for USB + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: drivers/usb/host/ohci-q.c + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2002 David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include + +/*-------------------------------------------------------------------------*/ + +/* + * URB goes back to driver, and isn't reissued. + * It's completely gone from HC data structures. + * PRECONDITION: ahcd lock held, irqs blocked. + */ +static void +finish_urb(struct admhcd *ahcd, struct urb *urb, int status) +__releases(ahcd->lock) +__acquires(ahcd->lock) +{ + urb_priv_free(ahcd, urb->hcpriv); + + if (likely(status == -EINPROGRESS)) + status = 0; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_ISOCHRONOUS: + admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs--; + break; + case PIPE_INTERRUPT: + admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs--; + break; + } + +#ifdef ADMHC_VERBOSE_DEBUG + urb_print(ahcd, urb, "RET", usb_pipeout(urb->pipe), status); +#endif + + /* urb->complete() can reenter this HCD */ + usb_hcd_unlink_urb_from_ep(admhcd_to_hcd(ahcd), urb); + spin_unlock(&ahcd->lock); + usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb, status); + spin_lock(&ahcd->lock); +} + + +/*-------------------------------------------------------------------------* + * ED handling functions + *-------------------------------------------------------------------------*/ + +#if 0 /* FIXME */ +/* search for the right schedule branch to use for a periodic ed. + * does some load balancing; returns the branch, or negative errno. + */ +static int balance(struct admhcd *ahcd, int interval, int load) +{ + int i, branch = -ENOSPC; + + /* iso periods can be huge; iso tds specify frame numbers */ + if (interval > NUM_INTS) + interval = NUM_INTS; + + /* search for the least loaded schedule branch of that period + * that has enough bandwidth left unreserved. + */ + for (i = 0; i < interval ; i++) { + if (branch < 0 || ahcd->load[branch] > ahcd->load[i]) { + int j; + + /* usb 1.1 says 90% of one frame */ + for (j = i; j < NUM_INTS; j += interval) { + if ((ahcd->load[j] + load) > 900) + break; + } + if (j < NUM_INTS) + continue; + branch = i; + } + } + return branch; +} +#endif + +/*-------------------------------------------------------------------------*/ + +#if 0 /* FIXME */ +/* both iso and interrupt requests have periods; this routine puts them + * into the schedule tree in the apppropriate place. most iso devices use + * 1msec periods, but that's not required. + */ +static void periodic_link(struct admhcd *ahcd, struct ed *ed) +{ + unsigned i; + + admhc_vdbg(ahcd, "link %sed %p branch %d [%dus.], interval %d\n", + (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "", + ed, ed->branch, ed->load, ed->interval); + + for (i = ed->branch; i < NUM_INTS; i += ed->interval) { + struct ed **prev = &ahcd->periodic[i]; + __hc32 *prev_p = &ahcd->hcca->int_table[i]; + struct ed *here = *prev; + + /* sorting each branch by period (slow before fast) + * lets us share the faster parts of the tree. + * (plus maybe: put interrupt eds before iso) + */ + while (here && ed != here) { + if (ed->interval > here->interval) + break; + prev = &here->ed_next; + prev_p = &here->hwNextED; + here = *prev; + } + if (ed != here) { + ed->ed_next = here; + if (here) + ed->hwNextED = *prev_p; + wmb(); + *prev = ed; + *prev_p = cpu_to_hc32(ahcd, ed->dma); + wmb(); + } + ahcd->load[i] += ed->load; + } + admhcd_to_hcd(ahcd)->self.bandwidth_allocated += ed->load / ed->interval; +} +#endif + +/* link an ed into the HC chain */ + +static int ed_schedule(struct admhcd *ahcd, struct ed *ed) +{ + struct ed *old_tail; + + if (admhcd_to_hcd(ahcd)->state == HC_STATE_QUIESCING) + return -EAGAIN; + + ed->state = ED_OPER; + + old_tail = ahcd->ed_tails[ed->type]; + + ed->ed_next = old_tail->ed_next; + if (ed->ed_next) { + ed->ed_next->ed_prev = ed; + ed->hwNextED = cpu_to_hc32(ahcd, ed->ed_next->dma); + } + ed->ed_prev = old_tail; + + old_tail->ed_next = ed; + old_tail->hwNextED = cpu_to_hc32(ahcd, ed->dma); + + ahcd->ed_tails[ed->type] = ed; + + admhc_dma_enable(ahcd); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#if 0 /* FIXME */ +/* scan the periodic table to find and unlink this ED */ +static void periodic_unlink(struct admhcd *ahcd, struct ed *ed) +{ + int i; + + for (i = ed->branch; i < NUM_INTS; i += ed->interval) { + struct ed *temp; + struct ed **prev = &ahcd->periodic[i]; + __hc32 *prev_p = &ahcd->hcca->int_table[i]; + + while (*prev && (temp = *prev) != ed) { + prev_p = &temp->hwNextED; + prev = &temp->ed_next; + } + if (*prev) { + *prev_p = ed->hwNextED; + *prev = ed->ed_next; + } + ahcd->load[i] -= ed->load; + } + + admhcd_to_hcd(ahcd)->self.bandwidth_allocated -= ed->load / ed->interval; + admhc_vdbg(ahcd, "unlink %sed %p branch %d [%dus.], interval %d\n", + (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "", + ed, ed->branch, ed->load, ed->interval); +} +#endif + +/* unlink an ed from the HC chain. + * just the link to the ed is unlinked. + * the link from the ed still points to another operational ed or 0 + * so the HC can eventually finish the processing of the unlinked ed + * (assuming it already started that, which needn't be true). + * + * ED_UNLINK is a transient state: the HC may still see this ED, but soon + * it won't. ED_SKIP means the HC will finish its current transaction, + * but won't start anything new. The TD queue may still grow; device + * drivers don't know about this HCD-internal state. + * + * When the HC can't see the ED, something changes ED_UNLINK to one of: + * + * - ED_OPER: when there's any request queued, the ED gets rescheduled + * immediately. HC should be working on them. + * + * - ED_IDLE: when there's no TD queue. there's no reason for the HC + * to care about this ED; safe to disable the endpoint. + * + * When finish_unlinks() runs later, after SOF interrupt, it will often + * complete one or more URB unlinks before making that state change. + */ +static void ed_deschedule(struct admhcd *ahcd, struct ed *ed) +{ + +#ifdef ADMHC_VERBOSE_DEBUG + admhc_dump_ed(ahcd, "ED-DESCHED", ed, 1); +#endif + + ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP); + wmb(); + ed->state = ED_UNLINK; + + /* remove this ED from the HC list */ + ed->ed_prev->hwNextED = ed->hwNextED; + + /* and remove it from our list also */ + ed->ed_prev->ed_next = ed->ed_next; + + if (ed->ed_next) + ed->ed_next->ed_prev = ed->ed_prev; + + if (ahcd->ed_tails[ed->type] == ed) + ahcd->ed_tails[ed->type] = ed->ed_prev; +} + +/*-------------------------------------------------------------------------*/ + +static struct ed *ed_create(struct admhcd *ahcd, unsigned int type, u32 info) +{ + struct ed *ed; + struct td *td; + + ed = ed_alloc(ahcd, GFP_ATOMIC); + if (!ed) + goto err; + + /* dummy td; end of td list for this ed */ + td = td_alloc(ahcd, GFP_ATOMIC); + if (!td) + goto err_free_ed; + + switch (type) { + case PIPE_INTERRUPT: + info |= ED_INT; + break; + case PIPE_ISOCHRONOUS: + info |= ED_ISO; + break; + } + + ed->dummy = td; + ed->state = ED_IDLE; + ed->type = type; + + ed->hwINFO = cpu_to_hc32(ahcd, info); + ed->hwTailP = cpu_to_hc32(ahcd, td->td_dma); + ed->hwHeadP = ed->hwTailP; /* ED_C, ED_H zeroed */ + + return ed; + +err_free_ed: + ed_free(ahcd, ed); +err: + return NULL; +} + +/* get and maybe (re)init an endpoint. init _should_ be done only as part + * of enumeration, usb_set_configuration() or usb_set_interface(). + */ +static struct ed *ed_get(struct admhcd *ahcd, struct usb_host_endpoint *ep, + struct usb_device *udev, unsigned int pipe, int interval) +{ + struct ed *ed; + unsigned long flags; + + spin_lock_irqsave(&ahcd->lock, flags); + + ed = ep->hcpriv; + if (!ed) { + u32 info; + + /* FIXME: usbcore changes dev->devnum before SET_ADDRESS + * succeeds ... otherwise we wouldn't need "pipe". + */ + info = usb_pipedevice(pipe); + info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << ED_EN_SHIFT; + info |= le16_to_cpu(ep->desc.wMaxPacketSize) << ED_MPS_SHIFT; + if (udev->speed == USB_SPEED_FULL) + info |= ED_SPEED_FULL; + + ed = ed_create(ahcd, usb_pipetype(pipe), info); + if (ed) + ep->hcpriv = ed; + } + + spin_unlock_irqrestore(&ahcd->lock, flags); + + return ed; +} + +/*-------------------------------------------------------------------------*/ + +/* request unlinking of an endpoint from an operational HC. + * put the ep on the rm_list + * real work is done at the next start frame (SOFI) hardware interrupt + * caller guarantees HCD is running, so hardware access is safe, + * and that ed->state is ED_OPER + */ +static void start_ed_unlink(struct admhcd *ahcd, struct ed *ed) +{ + +#ifdef ADMHC_VERBOSE_DEBUG + admhc_dump_ed(ahcd, "ED-UNLINK", ed, 1); +#endif + + ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE); + ed_deschedule(ahcd, ed); + + /* add this ED into the remove list */ + ed->ed_rm_next = ahcd->ed_rm_list; + ahcd->ed_rm_list = ed; + + /* enable SOF interrupt */ + admhc_intr_ack(ahcd, ADMHC_INTR_SOFI); + admhc_intr_enable(ahcd, ADMHC_INTR_SOFI); + /* flush those writes */ + admhc_writel_flush(ahcd); + + /* SOF interrupt might get delayed; record the frame counter value that + * indicates when the HC isn't looking at it, so concurrent unlinks + * behave. frame_no wraps every 2^16 msec, and changes right before + * SOF is triggered. + */ + ed->tick = admhc_frame_no(ahcd) + 1; +} + +/*-------------------------------------------------------------------------* + * TD handling functions + *-------------------------------------------------------------------------*/ + +/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */ + +static void +td_fill(struct admhcd *ahcd, u32 info, dma_addr_t data, int len, + struct urb *urb, int index) +{ + struct td *td, *td_pt; + struct urb_priv *urb_priv = urb->hcpriv; + int hash; + u32 cbl = 0; + +#if 1 + if (index == (urb_priv->td_cnt - 1) && + ((urb->transfer_flags & URB_NO_INTERRUPT) == 0)) + cbl |= TD_IE; +#else + if (index == (urb_priv->td_cnt - 1)) + cbl |= TD_IE; +#endif + + /* use this td as the next dummy */ + td_pt = urb_priv->td[index]; + + /* fill the old dummy TD */ + td = urb_priv->td[index] = urb_priv->ed->dummy; + urb_priv->ed->dummy = td_pt; + + td->ed = urb_priv->ed; + td->next_dl_td = NULL; + td->index = index; + td->urb = urb; + td->data_dma = data; + if (!len) + data = 0; + + if (data) + cbl |= (len & TD_BL_MASK); + + info |= TD_OWN; + + /* setup hardware specific fields */ + td->hwINFO = cpu_to_hc32(ahcd, info); + td->hwDBP = cpu_to_hc32(ahcd, data); + td->hwCBL = cpu_to_hc32(ahcd, cbl); + td->hwNextTD = cpu_to_hc32(ahcd, td_pt->td_dma); + + /* append to queue */ + list_add_tail(&td->td_list, &td->ed->td_list); + + /* hash it for later reverse mapping */ + hash = TD_HASH_FUNC(td->td_dma); + td->td_hash = ahcd->td_hash[hash]; + ahcd->td_hash[hash] = td; + + /* HC might read the TD (or cachelines) right away ... */ + wmb(); + td->ed->hwTailP = td->hwNextTD; +} + +/*-------------------------------------------------------------------------*/ + +/* Prepare all TDs of a transfer, and queue them onto the ED. + * Caller guarantees HC is active. + * Usually the ED is already on the schedule, so TDs might be + * processed as soon as they're queued. + */ +static void td_submit_urb(struct admhcd *ahcd, struct urb *urb) +{ + struct urb_priv *urb_priv = urb->hcpriv; + dma_addr_t data; + int data_len = urb->transfer_buffer_length; + int cnt = 0; + u32 info = 0; + int is_out = usb_pipeout(urb->pipe); + u32 toggle = 0; + + /* OHCI handles the bulk/interrupt data toggles itself. We just + * use the device toggle bits for resetting, and rely on the fact + * that resetting toggle is meaningless if the endpoint is active. + */ + + if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), is_out)) { + toggle = TD_T_CARRY; + } else { + toggle = TD_T_DATA0; + usb_settoggle(urb->dev, usb_pipeendpoint (urb->pipe), + is_out, 1); + } + + urb_priv->td_idx = 0; + list_add(&urb_priv->pending, &ahcd->pending); + + if (data_len) + data = urb->transfer_dma; + else + data = 0; + + /* NOTE: TD_CC is set so we can tell which TDs the HC processed by + * using TD_CC_GET, as well as by seeing them on the done list. + * (CC = NotAccessed ... 0x0F, or 0x0E in PSWs for ISO.) + */ + switch (urb_priv->ed->type) { + case PIPE_INTERRUPT: + info = is_out + ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT + : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN; + + /* setup service interval and starting frame number */ + info |= (urb->start_frame & TD_FN_MASK); + info |= (urb->interval & TD_ISI_MASK) << TD_ISI_SHIFT; + + td_fill(ahcd, info, data, data_len, urb, cnt); + cnt++; + + admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs++; + break; + + case PIPE_BULK: + info = is_out + ? TD_SCC_NOTACCESSED | TD_DP_OUT + : TD_SCC_NOTACCESSED | TD_DP_IN; + + /* TDs _could_ transfer up to 8K each */ + while (data_len > TD_DATALEN_MAX) { + td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), + data, TD_DATALEN_MAX, urb, cnt); + data += TD_DATALEN_MAX; + data_len -= TD_DATALEN_MAX; + cnt++; + } + + td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), data, + data_len, urb, cnt); + cnt++; + + if ((urb->transfer_flags & URB_ZERO_PACKET) + && (cnt < urb_priv->td_cnt)) { + td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), + 0, 0, urb, cnt); + cnt++; + } + break; + + /* control manages DATA0/DATA1 toggle per-request; SETUP resets it, + * any DATA phase works normally, and the STATUS ack is special. + */ + case PIPE_CONTROL: + /* fill a TD for the setup */ + info = TD_SCC_NOTACCESSED | TD_DP_SETUP | TD_T_DATA0; + td_fill(ahcd, info, urb->setup_dma, 8, urb, cnt++); + + if (data_len > 0) { + /* fill a TD for the data */ + info = TD_SCC_NOTACCESSED | TD_T_DATA1; + info |= is_out ? TD_DP_OUT : TD_DP_IN; + /* NOTE: mishandles transfers >8K, some >4K */ + td_fill(ahcd, info, data, data_len, urb, cnt++); + } + + /* fill a TD for the ACK */ + info = (is_out || data_len == 0) + ? TD_SCC_NOTACCESSED | TD_DP_IN | TD_T_DATA1 + : TD_SCC_NOTACCESSED | TD_DP_OUT | TD_T_DATA1; + td_fill(ahcd, info, data, 0, urb, cnt++); + + break; + + /* ISO has no retransmit, so no toggle; + * Each TD could handle multiple consecutive frames (interval 1); + * we could often reduce the number of TDs here. + */ + case PIPE_ISOCHRONOUS: + info = is_out + ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT + : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN; + + for (cnt = 0; cnt < urb->number_of_packets; cnt++) { + int frame = urb->start_frame; + + frame += cnt * urb->interval; + frame &= TD_FN_MASK; + td_fill(ahcd, info | frame, + data + urb->iso_frame_desc[cnt].offset, + urb->iso_frame_desc[cnt].length, urb, cnt); + } + admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs++; + break; + } + + if (urb_priv->td_cnt != cnt) + admhc_err(ahcd, "bad number of tds created for urb %p\n", urb); +} + +/*-------------------------------------------------------------------------* + * Done List handling functions + *-------------------------------------------------------------------------*/ + +/* calculate transfer length/status and update the urb */ +static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td) +{ + struct urb_priv *urb_priv = urb->hcpriv; + u32 info; + u32 bl; + u32 tdDBP; + int type = usb_pipetype(urb->pipe); + int cc; + int status = -EINPROGRESS; + + info = hc32_to_cpup(ahcd, &td->hwINFO); + tdDBP = hc32_to_cpup(ahcd, &td->hwDBP); + bl = TD_BL_GET(hc32_to_cpup(ahcd, &td->hwCBL)); + cc = TD_CC_GET(info); + + /* ISO ... drivers see per-TD length/status */ + if (type == PIPE_ISOCHRONOUS) { + /* TODO */ + int dlen = 0; + + /* NOTE: assumes FC in tdINFO == 0, and that + * only the first of 0..MAXPSW psws is used. + */ + if (info & TD_CC) /* hc didn't touch? */ + return status; + + if (usb_pipeout(urb->pipe)) + dlen = urb->iso_frame_desc[td->index].length; + else { + /* short reads are always OK for ISO */ + if (cc == TD_CC_DATAUNDERRUN) + cc = TD_CC_NOERROR; + dlen = tdDBP - td->data_dma + bl; + } + + urb->actual_length += dlen; + urb->iso_frame_desc[td->index].actual_length = dlen; + urb->iso_frame_desc[td->index].status = cc_to_error[cc]; + + if (cc != TD_CC_NOERROR) + admhc_vdbg(ahcd, + "urb %p iso td %p (%d) len %d cc %d\n", + urb, td, 1 + td->index, dlen, cc); + + /* BULK, INT, CONTROL ... drivers see aggregate length/status, + * except that "setup" bytes aren't counted and "short" transfers + * might not be reported as errors. + */ + } else { + /* update packet status if needed (short is normally ok) */ + if (cc == TD_CC_DATAUNDERRUN + && !(urb->transfer_flags & URB_SHORT_NOT_OK)) + cc = TD_CC_NOERROR; + + if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0) + status = cc_to_error[cc]; + + + /* count all non-empty packets except control SETUP packet */ + if ((type != PIPE_CONTROL || td->index != 0) && tdDBP != 0) + urb->actual_length += tdDBP - td->data_dma + bl; + + if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0) + admhc_vdbg(ahcd, + "urb %p td %p (%d) cc %d, len=%d/%d\n", + urb, td, td->index, cc, + urb->actual_length, + urb->transfer_buffer_length); + } + + list_del(&td->td_list); + urb_priv->td_idx++; + + return status; +} + +/*-------------------------------------------------------------------------*/ + +static void ed_halted(struct admhcd *ahcd, struct td *td, int cc) +{ + struct urb *urb = td->urb; + struct urb_priv *urb_priv = urb->hcpriv; + struct ed *ed = td->ed; + struct list_head *tmp = td->td_list.next; + __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C); + + admhc_dump_ed(ahcd, "ed halted", td->ed, 1); + /* clear ed halt; this is the td that caused it, but keep it inactive + * until its urb->complete() has a chance to clean up. + */ + ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP); + wmb(); + ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H); + + /* Get rid of all later tds from this urb. We don't have + * to be careful: no errors and nothing was transferred. + * Also patch the ed so it looks as if those tds completed normally. + */ + while (tmp != &ed->td_list) { + struct td *next; + + next = list_entry(tmp, struct td, td_list); + tmp = next->td_list.next; + + if (next->urb != urb) + break; + + /* NOTE: if multi-td control DATA segments get supported, + * this urb had one of them, this td wasn't the last td + * in that segment (TD_R clear), this ed halted because + * of a short read, _and_ URB_SHORT_NOT_OK is clear ... + * then we need to leave the control STATUS packet queued + * and clear ED_SKIP. + */ + list_del(&next->td_list); + urb_priv->td_cnt++; + ed->hwHeadP = next->hwNextTD | toggle; + } + + /* help for troubleshooting: report anything that + * looks odd ... that doesn't include protocol stalls + * (or maybe some other things) + */ + switch (cc) { + case TD_CC_DATAUNDERRUN: + if ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0) + break; + /* fallthrough */ + case TD_CC_STALL: + if (usb_pipecontrol(urb->pipe)) + break; + /* fallthrough */ + default: + admhc_dbg(ahcd, + "urb %p path %s ep%d%s %08x cc %d --> status %d\n", + urb, urb->dev->devpath, + usb_pipeendpoint (urb->pipe), + usb_pipein(urb->pipe) ? "in" : "out", + hc32_to_cpu(ahcd, td->hwINFO), + cc, cc_to_error[cc]); + } +} + +/*-------------------------------------------------------------------------*/ + +/* there are some urbs/eds to unlink; called in_irq(), with HCD locked */ +static void +finish_unlinks(struct admhcd *ahcd, u16 tick) +{ + struct ed *ed, **last; + +rescan_all: + for (last = &ahcd->ed_rm_list, ed = *last; ed != NULL; ed = *last) { + struct list_head *entry, *tmp; + int completed, modified; + __hc32 *prev; + + /* only take off EDs that the HC isn't using, accounting for + * frame counter wraps and EDs with partially retired TDs + */ + if (likely(HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))) { + if (tick_before(tick, ed->tick)) { +skip_ed: + last = &ed->ed_rm_next; + continue; + } +#if 0 + if (!list_empty(&ed->td_list)) { + struct td *td; + u32 head; + + td = list_entry(ed->td_list.next, struct td, + td_list); + head = hc32_to_cpu(ahcd, ed->hwHeadP) & + TD_MASK; + + /* INTR_WDH may need to clean up first */ + if (td->td_dma != head) + goto skip_ed; + } +#endif + } + + /* reentrancy: if we drop the schedule lock, someone might + * have modified this list. normally it's just prepending + * entries (which we'd ignore), but paranoia won't hurt. + */ + *last = ed->ed_rm_next; + ed->ed_rm_next = NULL; + modified = 0; + + /* unlink urbs as requested, but rescan the list after + * we call a completion since it might have unlinked + * another (earlier) urb + * + * When we get here, the HC doesn't see this ed. But it + * must not be rescheduled until all completed URBs have + * been given back to the driver. + */ +rescan_this: + completed = 0; + prev = &ed->hwHeadP; + list_for_each_safe(entry, tmp, &ed->td_list) { + struct td *td; + struct urb *urb; + struct urb_priv *urb_priv; + __hc32 savebits; + u32 tdINFO; + int status; + + td = list_entry(entry, struct td, td_list); + urb = td->urb; + urb_priv = td->urb->hcpriv; + + if (!urb->unlinked) { + prev = &td->hwNextTD; + continue; + } + + if ((urb_priv) == NULL) + continue; + + /* patch pointer hc uses */ + savebits = *prev & ~cpu_to_hc32(ahcd, TD_MASK); + *prev = td->hwNextTD | savebits; + /* If this was unlinked, the TD may not have been + * retired ... so manually save dhe data toggle. + * The controller ignores the value we save for + * control and ISO endpoints. + */ + tdINFO = hc32_to_cpup(ahcd, &td->hwINFO); + if ((tdINFO & TD_T) == TD_T_DATA0) + ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_C); + else if ((tdINFO & TD_T) == TD_T_DATA1) + ed->hwHeadP |= cpu_to_hc32(ahcd, ED_C); + + /* HC may have partly processed this TD */ +#ifdef ADMHC_VERBOSE_DEBUG + urb_print(ahcd, urb, "PARTIAL", 0); +#endif + status = td_done(ahcd, urb, td); + + /* if URB is done, clean up */ + if (urb_priv->td_idx == urb_priv->td_cnt) { + modified = completed = 1; + finish_urb(ahcd, urb, status); + } + } + if (completed && !list_empty(&ed->td_list)) + goto rescan_this; + + /* ED's now officially unlinked, hc doesn't see */ + ed->state = ED_IDLE; + ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H); + ed->hwNextED = 0; + wmb(); + ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP | ED_DEQUEUE); + + /* but if there's work queued, reschedule */ + if (!list_empty(&ed->td_list)) { + if (HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state)) + ed_schedule(ahcd, ed); + } + + if (modified) + goto rescan_all; + } +} + +/*-------------------------------------------------------------------------*/ +/* + * Process normal completions (error or success) and clean the schedules. + * + * This is the main path for handing urbs back to drivers. The only other + * normal path is finish_unlinks(), which unlinks URBs using ed_rm_list, + * instead of scanning the (re-reversed) donelist as this does. + */ + +static void ed_unhalt(struct admhcd *ahcd, struct ed *ed, struct urb *urb) +{ + struct list_head *entry, *tmp; + __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C); + +#ifdef ADMHC_VERBOSE_DEBUG + admhc_dump_ed(ahcd, "UNHALT", ed, 0); +#endif + /* clear ed halt; this is the td that caused it, but keep it inactive + * until its urb->complete() has a chance to clean up. + */ + ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP); + wmb(); + ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H); + + list_for_each_safe(entry, tmp, &ed->td_list) { + struct td *td = list_entry(entry, struct td, td_list); + __hc32 info; + + if (td->urb != urb) + break; + + info = td->hwINFO; + info &= ~cpu_to_hc32(ahcd, TD_CC | TD_OWN); + td->hwINFO = info; + + ed->hwHeadP = td->hwNextTD | toggle; + wmb(); + } + +} + +static void ed_intr_refill(struct admhcd *ahcd, struct ed *ed) +{ + __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C); + + ed->hwHeadP = ed->hwTailP | toggle; +} + + +static inline int is_ed_halted(struct admhcd *ahcd, struct ed *ed) +{ + return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_H) == ED_H); +} + +static inline int is_td_halted(struct admhcd *ahcd, struct ed *ed, + struct td *td) +{ + return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & TD_MASK) == + (hc32_to_cpup(ahcd, &td->hwNextTD) & TD_MASK)); +} + +static void ed_update(struct admhcd *ahcd, struct ed *ed) +{ + struct list_head *entry, *tmp; + +#ifdef ADMHC_VERBOSE_DEBUG + admhc_dump_ed(ahcd, "UPDATE", ed, 1); +#endif + + list_for_each_safe(entry, tmp, &ed->td_list) { + struct td *td = list_entry(entry, struct td, td_list); + struct urb *urb = td->urb; + struct urb_priv *urb_priv = urb->hcpriv; + int status; + + if (hc32_to_cpup(ahcd, &td->hwINFO) & TD_OWN) + break; + + /* update URB's length and status from TD */ + status = td_done(ahcd, urb, td); + if (is_ed_halted(ahcd, ed) && is_td_halted(ahcd, ed, td)) + ed_unhalt(ahcd, ed, urb); + + if (ed->type == PIPE_INTERRUPT) + ed_intr_refill(ahcd, ed); + + /* If all this urb's TDs are done, call complete() */ + if (urb_priv->td_idx == urb_priv->td_cnt) + finish_urb(ahcd, urb, status); + + /* clean schedule: unlink EDs that are no longer busy */ + if (list_empty(&ed->td_list)) { + if (ed->state == ED_OPER) + start_ed_unlink(ahcd, ed); + + /* ... reenabling halted EDs only after fault cleanup */ + } else if ((ed->hwINFO & cpu_to_hc32(ahcd, + ED_SKIP | ED_DEQUEUE)) + == cpu_to_hc32(ahcd, ED_SKIP)) { + td = list_entry(ed->td_list.next, struct td, td_list); +#if 0 + if (!(td->hwINFO & cpu_to_hc32(ahcd, TD_DONE))) { + ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP); + /* ... hc may need waking-up */ + switch (ed->type) { + case PIPE_CONTROL: + admhc_writel(ahcd, OHCI_CLF, + &ahcd->regs->cmdstatus); + break; + case PIPE_BULK: + admhc_writel(ahcd, OHCI_BLF, + &ahcd->regs->cmdstatus); + break; + } + } +#else + if ((td->hwINFO & cpu_to_hc32(ahcd, TD_OWN))) + ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP); +#endif + } + + } +} + +/* there are some tds completed; called in_irq(), with HCD locked */ +static void admhc_td_complete(struct admhcd *ahcd) +{ + struct ed *ed; + + for (ed = ahcd->ed_head; ed; ed = ed->ed_next) { + if (ed->state != ED_OPER) + continue; + + ed_update(ahcd, ed); + } +} -- cgit v1.2.3