From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001 From: James <> Date: Wed, 4 Nov 2015 11:49:21 +0000 Subject: trunk-47381 --- package/network/utils/uqmi/Makefile | 50 ++++ .../utils/uqmi/files/lib/netifd/proto/qmi.sh | 257 +++++++++++++++++++++ 2 files changed, 307 insertions(+) create mode 100644 package/network/utils/uqmi/Makefile create mode 100755 package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh (limited to 'package/network/utils/uqmi') diff --git a/package/network/utils/uqmi/Makefile b/package/network/utils/uqmi/Makefile new file mode 100644 index 0000000..7ccf549 --- /dev/null +++ b/package/network/utils/uqmi/Makefile @@ -0,0 +1,50 @@ +include $(TOPDIR)/rules.mk + +PKG_NAME:=uqmi +PKG_VERSION:=2015-09-17 +PKG_RELEASE=$(PKG_SOURCE_VERSION) + +PKG_SOURCE_PROTO:=git +PKG_SOURCE_URL:=git://nbd.name/uqmi.git +PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) +PKG_SOURCE_VERSION:=8a97586e9445a60e355dea13aa87885ab3dcb277 +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz +PKG_MAINTAINER:=Matti Laakso +# PKG_MIRROR_MD5SUM:= +# CMAKE_INSTALL:=1 + +PKG_LICENSE:=GPL-2.0 +PKG_LICENSE_FILES:= + +PKG_BUILD_PARALLEL:=1 + +include $(INCLUDE_DIR)/package.mk +include $(INCLUDE_DIR)/cmake.mk + +define Package/uqmi + SECTION:=net + CATEGORY:=Network + DEPENDS:=+libubox +libblobmsg-json +kmod-usb-net +kmod-usb-net-qmi-wwan +wwan + TITLE:=Control utility for mobile broadband modems +endef + +define Package/uqmi/description + uqmi is a command line tool for controlling mobile broadband modems using + the QMI-protocol. +endef + +TARGET_CFLAGS += \ + -I$(STAGING_DIR)/usr/include -ffunction-sections -fdata-sections + +TARGET_LDFLAGS += -Wl,--gc-sections + +CMAKE_OPTIONS += \ + -DDEBUG=1 + +define Package/uqmi/install + $(INSTALL_DIR) $(1)/sbin + $(INSTALL_BIN) $(PKG_BUILD_DIR)/uqmi $(1)/sbin/ + $(CP) ./files/* $(1)/ +endef + +$(eval $(call BuildPackage,uqmi)) diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh new file mode 100755 index 0000000..48864be --- /dev/null +++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh @@ -0,0 +1,257 @@ +#!/bin/sh + +[ -n "$INCLUDE_ONLY" ] || { + . /lib/functions.sh + . ../netifd-proto.sh + init_proto "$@" +} + +proto_qmi_init_config() { + available=1 + no_device=1 + proto_config_add_string "device:device" + proto_config_add_string apn + proto_config_add_string auth + proto_config_add_string username + proto_config_add_string password + proto_config_add_string pincode + proto_config_add_string delay + proto_config_add_string modes + proto_config_add_boolean ipv6 + proto_config_add_boolean dhcp +} + +proto_qmi_setup() { + local interface="$1" + + local device apn auth username password pincode delay modes ipv6 dhcp + local cid_4 pdh_4 cid_6 pdh_6 ipv4 + local ip subnet gateway dns1 dns2 ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6 + json_get_vars device apn auth username password pincode delay modes ipv6 dhcp + + ipv4=1 + + if [ "$ipv6" = 0 ]; then + ipv6="" + else + ipv6=1 + fi + + [ -n "$ctl_device" ] && device=$ctl_device + + [ -n "$device" ] || { + echo "No control device specified" + proto_notify_error "$interface" NO_DEVICE + proto_set_available "$interface" 0 + return 1 + } + [ -c "$device" ] || { + echo "The specified control device does not exist" + proto_notify_error "$interface" NO_DEVICE + proto_set_available "$interface" 0 + return 1 + } + + devname="$(basename "$device")" + devpath="$(readlink -f /sys/class/usbmisc/$devname/device/)" + ifname="$( ls "$devpath"/net )" + [ -n "$ifname" ] || { + echo "The interface could not be found." + proto_notify_error "$interface" NO_IFACE + proto_set_available "$interface" 0 + return 1 + } + + [ -n "$delay" ] && sleep "$delay" + + while uqmi -s -d "$device" --get-pin-status | grep '"UIM uninitialized"' > /dev/null; do + sleep 1; + done + + [ -n "$pincode" ] && { + uqmi -s -d "$device" --verify-pin1 "$pincode" || { + echo "Unable to verify PIN" + proto_notify_error "$interface" PIN_FAILED + proto_block_restart "$interface" + return 1 + } + } + + [ -n "$apn" ] || { + echo "No APN specified" + proto_notify_error "$interface" NO_APN + return 1 + } + + uqmi -s -d "$device" --set-data-format 802.3 + uqmi -s -d "$device" --wda-set-data-format 802.3 + + echo "Waiting for network registration" + while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do + sleep 5; + done + + [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" + + echo "Starting network $apn" + + cid_4=`uqmi -s -d "$device" --get-client-id wds` + [ $? -ne 0 ] && { + echo "Unable to obtain client ID" + proto_notify_error "$interface" NO_CID + return 1 + } + + pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \ + --start-network "$apn" \ + ${auth:+--auth-type $auth} \ + ${username:+--username $username} \ + ${password:+--password $password} \ + --ip-family ipv4` + [ $? -ne 0 ] && { + echo "Unable to connect IPv4" + uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds + ipv4="" + } + + [ -n "$ipv6" ] && { + cid_6=`uqmi -s -d "$device" --get-client-id wds` + if [ $? = 0 ]; then + pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \ + --start-network "$apn" \ + ${auth:+--auth-type $auth} \ + ${username:+--username $username} \ + ${password:+--password $password} \ + --ip-family ipv6` + [ $? -ne 0 ] && { + echo "Unable to connect IPv6" + uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds + ipv6="" + } + else + echo "Unable to connect IPv6" + ipv6="" + fi + } + + [ -z "$ipv4" -a -z "$ipv6" ] && { + echo "Unable to connect" + proto_notify_error "$interface" CALL_FAILED + return 1 + } + + if [ -z "$dhcp" -o "$dhcp" = 0 ]; then + echo "Setting up $ifname" + [ -n "$ipv4" ] && { + json_load "$(uqmi -s -d $device --set-client-id wds,$cid_4 --get-current-settings)" + json_select ipv4 + json_get_vars ip subnet gateway dns1 dns2 + + proto_init_update "$ifname" 1 + proto_set_keep 1 + proto_add_ipv4_address "$ip" "$subnet" + proto_add_dns_server "$dns1" + proto_add_dns_server "$dns2" + proto_add_ipv4_route "0.0.0.0" 0 "$gateway" + proto_add_data + json_add_string "cid_4" "$cid_4" + json_add_string "pdh_4" "$pdh_4" + proto_close_data + proto_send_update "$interface" + } + + [ -n "$ipv6" ] && { + json_load "$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)" + json_select ipv6 + json_get_var ip_6 ip + json_get_var gateway_6 gateway + json_get_var dns1_6 dns1 + json_get_var dns2_6 dns2 + json_get_var ip_prefix_length ip-prefix-length + + proto_init_update "$ifname" 1 + proto_set_keep 1 + # RFC 7278: Extend an IPv6 /64 Prefix to LAN + proto_add_ipv6_address "$ip_6" "128" + proto_add_ipv6_prefix "${ip_6}/${ip_prefix_length}" + proto_add_ipv6_route "$gateway_6" "128" + proto_add_ipv6_route "::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}" + proto_add_dns_server "$dns1_6" + proto_add_dns_server "$dns2_6" + proto_add_data + json_add_string "cid_6" "$cid_6" + json_add_string "pdh_6" "$pdh_6" + proto_close_data + proto_send_update "$interface" + } + else + echo "Starting DHCP on $ifname" + proto_init_update "$ifname" 1 + proto_add_data + [ -n "$ipv4" ] && { + json_add_string "cid_4" "$cid_4" + json_add_string "pdh_4" "$pdh_4" + } + [ -n "$ipv6" ] && { + json_add_string "cid_6" "$cid_6" + json_add_string "pdh_6" "$pdh_6" + } + proto_close_data + proto_send_update "$interface" + + [ -n "$ipv4" ] && { + json_init + json_add_string name "${interface}_4" + json_add_string ifname "@$interface" + json_add_string proto "dhcp" + json_close_object + ubus call network add_dynamic "$(json_dump)" + } + + [ -n "$ipv6" ] && { + json_init + json_add_string name "${interface}_6" + json_add_string ifname "@$interface" + json_add_string proto "dhcpv6" + # RFC 7278: Extend an IPv6 /64 Prefix to LAN + json_add_string extendprefix 1 + json_close_object + ubus call network add_dynamic "$(json_dump)" + } + fi +} + +proto_qmi_teardown() { + local interface="$1" + + local device cid_4 pdh_4 cid_6 pdh_6 + json_get_vars device + + [ -n "$ctl_device" ] && device=$ctl_device + + echo "Stopping network" + + json_load "$(ubus call network.interface.$interface status)" + json_select data + json_get_vars cid_4 pdh_4 cid_6 pdh_6 + + [ -n "$cid_4" ] && { + [ -n "$pdh_4" ] && { + uqmi -s -d "$device" --set-client-id wds,"$cid_4" --stop-network "$pdh_4" + uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds + } + } + [ -n "$cid_6" ] && { + [ -n "$pdh_6" ] && { + uqmi -s -d "$device" --set-client-id wds,"$cid_6" --stop-network "$pdh_6" + uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds + } + } + + proto_init_update "*" 0 + proto_send_update "$interface" +} + +[ -n "$INCLUDE_ONLY" ] || { + add_protocol qmi +} -- cgit v1.2.3