From 716ca530e1c4515d8683c9d5be3d56b301758b66 Mon Sep 17 00:00:00 2001
From: James <>
Date: Wed, 4 Nov 2015 11:49:21 +0000
Subject: trunk-47381

---
 package/network/utils/comgt/files/ncm.sh | 192 +++++++++++++++++++++++++++++++
 1 file changed, 192 insertions(+)
 create mode 100644 package/network/utils/comgt/files/ncm.sh

(limited to 'package/network/utils/comgt/files/ncm.sh')

diff --git a/package/network/utils/comgt/files/ncm.sh b/package/network/utils/comgt/files/ncm.sh
new file mode 100644
index 0000000..571cfaa
--- /dev/null
+++ b/package/network/utils/comgt/files/ncm.sh
@@ -0,0 +1,192 @@
+#!/bin/sh
+
+[ -n "$INCLUDE_ONLY" ] || {
+	. /lib/functions.sh
+	. ../netifd-proto.sh
+	init_proto "$@"
+}
+
+proto_ncm_init_config() {
+	no_device=1
+	available=1
+	proto_config_add_string "device:device"
+	proto_config_add_string apn
+	proto_config_add_string auth
+	proto_config_add_string username
+	proto_config_add_string password
+	proto_config_add_string pincode
+	proto_config_add_string delay
+	proto_config_add_string mode
+	proto_config_add_string pdptype
+	proto_config_add_boolean ipv6
+}
+
+proto_ncm_setup() {
+	local interface="$1"
+
+	local manufacturer initialize setmode connect ifname devname devpath
+
+	local device apn auth username password pincode delay mode pdptype ipv6
+	json_get_vars device apn auth username password pincode delay mode pdptype ipv6
+	
+	if [ "$ipv6" = 0 ]; then
+		ipv6=""
+	else
+		ipv6=1
+	fi
+	
+	[ -z "$pdptype" ] && {
+		if [ -n "$ipv6" ]; then
+			pdptype="IPV4V6"
+		else
+			pdptype="IP"
+		fi
+	}
+
+	[ -n "$ctl_device" ] && device=$ctl_device
+
+	[ -n "$device" ] || {
+		echo "No control device specified"
+		proto_notify_error "$interface" NO_DEVICE
+		proto_set_available "$interface" 0
+		return 1
+	}
+	[ -e "$device" ] || {
+		echo "Control device not valid"
+		proto_set_available "$interface" 0
+		return 1
+	}
+	[ -n "$apn" ] || {
+		echo "No APN specified"
+		proto_notify_error "$interface" NO_APN
+		return 1
+	}
+
+	devname="$(basename "$device")"
+	case "$devname" in
+	'tty'*)
+		devpath="$(readlink -f /sys/class/tty/$devname/device)"
+		ifname="$( ls "$devpath"/../../*/net )"
+		;;
+	*)
+		devpath="$(readlink -f /sys/class/usbmisc/$devname/device/)"
+		ifname="$( ls "$devpath"/net )"
+		;;
+	esac
+	[ -n "$ifname" ] || {
+		echo "The interface could not be found."
+		proto_notify_error "$interface" NO_IFACE
+		proto_set_available "$interface" 0
+		return 1
+	}
+
+	[ -n "$delay" ] && sleep "$delay"
+
+	manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print tolower($2) }'`
+	[ $? -ne 0 ] && {
+		echo "Failed to get modem information"
+		proto_notify_error "$interface" GETINFO_FAILED
+		return 1
+	}
+
+	json_load "$(cat /etc/gcom/ncm.json)"
+	json_select "$manufacturer"
+	[ $? -ne 0 ] && {
+		echo "Unsupported modem"
+		proto_notify_error "$interface" UNSUPPORTED_MODEM
+		proto_set_available "$interface" 0
+		return 1
+	}
+	json_get_values initialize initialize
+	for i in $initialize; do
+		eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+			echo "Failed to initialize modem"
+			proto_notify_error "$interface" INITIALIZE_FAILED
+			return 1
+		}
+	done
+
+	[ -n "$pincode" ] && {
+		PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+			echo "Unable to verify PIN"
+			proto_notify_error "$interface" PIN_FAILED
+			proto_block_restart "$interface"
+			return 1
+		}
+	}
+	[ -n "$mode" ] && {
+		json_select modes
+		json_get_var setmode "$mode"
+		COMMAND="$setmode" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+			echo "Failed to set operating mode"
+			proto_notify_error "$interface" SETMODE_FAILED
+			return 1
+		}
+		json_select ..
+	}
+
+	json_get_vars connect
+	eval COMMAND="$connect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+		echo "Failed to connect"
+		proto_notify_error "$interface" CONNECT_FAILED
+		return 1
+	}
+
+	echo "Connected, starting DHCP on $ifname"
+	
+	proto_init_update "$ifname" 1
+	proto_send_update "$interface"
+
+	json_init
+	json_add_string name "${interface}_4"
+	json_add_string ifname "@$interface"
+	json_add_string proto "dhcp"
+	ubus call network add_dynamic "$(json_dump)"
+
+	[ -n "$ipv6" ] && {
+		json_init
+		json_add_string name "${interface}_6"
+		json_add_string ifname "@$interface"
+		json_add_string proto "dhcpv6"
+		json_add_string extendprefix 1
+		ubus call network add_dynamic "$(json_dump)"
+	}
+}
+
+proto_ncm_teardown() {
+	local interface="$1"
+
+	local manufacturer disconnect
+
+	local device
+	json_get_vars device
+
+	echo "Stopping network"
+
+	manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print tolower($2) }'`
+	[ $? -ne 0 ] && {
+		echo "Failed to get modem information"
+		proto_notify_error "$interface" GETINFO_FAILED
+		return 1
+	}
+
+	json_load "$(cat /etc/gcom/ncm.json)"
+	json_select "$manufacturer" || {
+		echo "Unsupported modem"
+		proto_notify_error "$interface" UNSUPPORTED_MODEM
+		return 1
+	}
+
+	json_get_vars disconnect
+	COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+		echo "Failed to disconnect"
+		proto_notify_error "$interface" DISCONNECT_FAILED
+		return 1
+	}
+
+	proto_init_update "*" 0
+	proto_send_update "$interface"
+}
+[ -n "$INCLUDE_ONLY" ] || {
+	add_protocol ncm
+}
-- 
cgit v1.2.3