diff options
Diffstat (limited to 'package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch')
| -rw-r--r-- | package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch | 304 |
1 files changed, 304 insertions, 0 deletions
diff --git a/package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch b/package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch new file mode 100644 index 0000000..38d7856 --- /dev/null +++ b/package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch @@ -0,0 +1,304 @@ +From a18f994f373db4467a4680f83ead997c8122908e Mon Sep 17 00:00:00 2001 +From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> +Date: Wed, 22 May 2013 17:48:08 +0200 +Subject: MIPS: add board support for ZyXEL P-661HNU-Fx + +Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> + +--- /dev/null ++++ b/board/zyxel/p661hnufx/Makefile +@@ -0,0 +1,27 @@ ++# ++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).o ++ ++COBJS = $(BOARD).o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(call cmd_link_o_target, $(OBJS) $(SOBJS)) ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +--- /dev/null ++++ b/board/zyxel/p661hnufx/config.mk +@@ -0,0 +1,7 @@ ++# ++# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR) +--- /dev/null ++++ b/board/zyxel/p661hnufx/ddr_settings.h +@@ -0,0 +1,55 @@ ++/* ++ * Copyright (C) 2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com ++ * ++ * The values have been extracted from original ZyXEL U-Boot. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#define MC_DC00_VALUE 0x1B1B ++#define MC_DC01_VALUE 0x0 ++#define MC_DC02_VALUE 0x0 ++#define MC_DC03_VALUE 0x0 ++#define MC_DC04_VALUE 0x0 ++#define MC_DC05_VALUE 0x200 ++#define MC_DC06_VALUE 0x307 ++#define MC_DC07_VALUE 0x303 ++#define MC_DC08_VALUE 0x103 ++#define MC_DC09_VALUE 0x80B ++#define MC_DC10_VALUE 0x203 ++#define MC_DC11_VALUE 0xE02 ++#define MC_DC12_VALUE 0x2C8 ++#define MC_DC13_VALUE 0x1 ++#define MC_DC14_VALUE 0x0 ++#define MC_DC15_VALUE 0x100 ++#define MC_DC16_VALUE 0xC800 ++#define MC_DC17_VALUE 0xF ++#define MC_DC18_VALUE 0x301 ++#define MC_DC19_VALUE 0x200 ++#define MC_DC20_VALUE 0xA04 ++#define MC_DC21_VALUE 0x1600 ++#define MC_DC22_VALUE 0x1616 ++#define MC_DC23_VALUE 0x0 ++#define MC_DC24_VALUE 0x5D ++#define MC_DC25_VALUE 0x0 ++#define MC_DC26_VALUE 0x0 ++#define MC_DC27_VALUE 0x0 ++#define MC_DC28_VALUE 0x5FB ++#define MC_DC29_VALUE 0x35DF ++#define MC_DC30_VALUE 0x99E9 ++#define MC_DC31_VALUE 0x0 ++#define MC_DC32_VALUE 0x0 ++#define MC_DC33_VALUE 0x0 ++#define MC_DC34_VALUE 0x0 ++#define MC_DC35_VALUE 0x0 ++#define MC_DC36_VALUE 0x0 ++#define MC_DC37_VALUE 0x0 ++#define MC_DC38_VALUE 0x0 ++#define MC_DC39_VALUE 0x0 ++#define MC_DC40_VALUE 0x0 ++#define MC_DC41_VALUE 0x0 ++#define MC_DC42_VALUE 0x0 ++#define MC_DC43_VALUE 0x0 ++#define MC_DC44_VALUE 0x0 ++#define MC_DC45_VALUE 0x600 ++#define MC_DC46_VALUE 0x0 +--- /dev/null ++++ b/board/zyxel/p661hnufx/p661hnufx.c +@@ -0,0 +1,102 @@ ++/* ++ * Copyright (C) 2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include <common.h> ++#include <switch.h> ++#include <spi.h> ++#include <asm/gpio.h> ++#include <asm/lantiq/eth.h> ++#include <asm/lantiq/reset.h> ++#include <asm/lantiq/chipid.h> ++ ++static void gpio_init(void) ++{ ++ /* SPI CS 0.4 to serial flash */ ++ gpio_direction_output(10, 1); ++} ++ ++int board_early_init_f(void) ++{ ++ gpio_init(); ++ ++ return 0; ++} ++ ++int checkboard(void) ++{ ++ puts("Board: " CONFIG_BOARD_NAME "\n"); ++ ltq_chip_print_info(); ++ ++ return 0; ++} ++ ++static const struct ltq_eth_port_config eth_port_config[] = { ++ /* MAC0: Lantiq Tantos switch */ ++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII }, ++ /* MAC1: unused */ ++ { 1, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE }, ++}; ++ ++static const struct ltq_eth_board_config eth_board_config = { ++ .ports = eth_port_config, ++ .num_ports = ARRAY_SIZE(eth_port_config), ++}; ++ ++int board_eth_init(bd_t *bis) ++{ ++ return ltq_eth_initialize(ð_board_config); ++} ++ ++static struct switch_device psb697x_dev = { ++ .name = "psb697x", ++ .cpu_port = 5, ++ .port_mask = 0xF, ++}; ++ ++int board_switch_init(void) ++{ ++ printf("%s\n", __func__); ++ ++#if 0 ++ ltq_reset_once(LTQ_RESET_HARD, 200000); ++ __udelay(50000); ++#endif ++ ++ return switch_device_register(&psb697x_dev); ++} ++ ++int spi_cs_is_valid(unsigned int bus, unsigned int cs) ++{ ++ if (bus) ++ return 0; ++ ++ if (cs == 4) ++ return 1; ++ ++ return 0; ++} ++ ++void spi_cs_activate(struct spi_slave *slave) ++{ ++ switch (slave->cs) { ++ case 4: ++ gpio_set_value(10, 0); ++ break; ++ default: ++ break; ++ } ++} ++ ++void spi_cs_deactivate(struct spi_slave *slave) ++{ ++ switch (slave->cs) { ++ case 4: ++ gpio_set_value(10, 1); ++ break; ++ default: ++ break; ++ } ++} +--- a/boards.cfg ++++ b/boards.cfg +@@ -499,6 +499,9 @@ Active mips mips32 - + Active mips mips32 arx100 zte zxv10h201l zxv10h201l_nor zxv10h201l:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org> + Active mips mips32 arx100 zte zxv10h201l zxv10h201l_ram zxv10h201l:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org> + Active mips mips32 arx100 zte zxv10h201l zxv10h201l_zte zxv10h201l:SYS_BOOT_ZTE Luka Perkov <luka@openwrt.org> ++Active mips mips32 arx100 zyxel p661hnufx p661hnufx_ram p661hnufx:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org> ++Active mips mips32 arx100 zyxel p661hnufx p661hnufx_sfspl p661hnufx:SYS_BOOT_SFSPL Luka Perkov <luka@openwrt.org> ++Active mips mips32 arx100 zyxel p661hnufx p661hnufx_zyxel p661hnufx:SYS_BOOT_ZYXEL Luka Perkov <luka@openwrt.org> + Active mips mips32 au1x00 - dbau1x00 dbau1000 dbau1x00:DBAU1000 Thomas Lange <thomas@corelatus.se> + Active mips mips32 au1x00 - dbau1x00 dbau1100 dbau1x00:DBAU1100 Thomas Lange <thomas@corelatus.se> + Active mips mips32 au1x00 - dbau1x00 dbau1500 dbau1x00:DBAU1500 Thomas Lange <thomas@corelatus.se> +--- /dev/null ++++ b/include/configs/p661hnufx.h +@@ -0,0 +1,79 @@ ++/* ++ * Copyright (C) 2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#define CONFIG_MACH_TYPE "P-661HNU-Fx" ++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE ++#define CONFIG_BOARD_NAME "ZyXEL P-661HNU-Fx" ++ ++/* Configure SoC */ ++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */ ++ ++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */ ++ ++#define CONFIG_LTQ_SUPPORT_SPI_FLASH ++#define CONFIG_SPI_FLASH_MACRONIX /* Supports Macronix serial flash */ ++#define CONFIG_SPI_FLASH_4BYTE_MODE ++ ++#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */ ++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */ ++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */ ++ ++#define CONFIG_SPL_SPI_BUS 0 ++#define CONFIG_SPL_SPI_CS 4 ++#define CONFIG_SPL_SPI_MAX_HZ 25000000 ++#define CONFIG_SPL_SPI_MODE 0 ++ ++/* Switch devices */ ++#define CONFIG_SWITCH_MULTI ++#define CONFIG_SWITCH_PSB697X ++ ++/* Environment */ ++#define CONFIG_ENV_SPI_BUS CONFIG_SPL_SPI_BUS ++#define CONFIG_ENV_SPI_CS CONFIG_SPL_SPI_CS ++#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SPL_SPI_MAX_HZ ++#define CONFIG_ENV_SPI_MODE CONFIG_SPL_SPI_MODE ++ ++#if defined(CONFIG_SYS_BOOT_SFSPL) ++#define CONFIG_ENV_IS_IN_SPI_FLASH ++#define CONFIG_ENV_OVERWRITE ++#define CONFIG_ENV_OFFSET (512 * 1024) ++#define CONFIG_ENV_SECT_SIZE (256 * 1024) ++#else ++#define CONFIG_ENV_IS_NOWHERE ++#endif ++ ++#define CONFIG_ENV_SIZE (8 * 1024) ++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR ++ ++#if defined(CONFIG_SYS_BOOT_ZYXEL) ++#define CONFIG_SYS_TEXT_BASE 0x80800000 ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#endif ++ ++/* Console */ ++#define CONFIG_LTQ_ADVANCED_CONSOLE ++#define CONFIG_BAUDRATE 115200 ++#define CONFIG_CONSOLE_ASC 1 ++#define CONFIG_CONSOLE_DEV "ttyLTQ1" ++ ++/* Pull in default board configs for Lantiq XWAY Danube */ ++#include <asm/lantiq/config.h> ++#include <asm/arch/config.h> ++ ++/* Pull in default OpenWrt configs for Lantiq SoC */ ++#include "openwrt-lantiq-common.h" ++ ++#define CONFIG_ENV_UPDATE_UBOOT_SF \ ++ "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0" ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ CONFIG_ENV_LANTIQ_DEFAULTS \ ++ CONFIG_ENV_UPDATE_UBOOT_SF ++ ++#endif /* __CONFIG_H */ |