From a375beba066516ecafddebc765454ac6ec599f3d Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 6 Aug 2014 18:26:08 +0200 Subject: [PATCH 26/57] MIPS: ralink: add mt7628an support Signed-off-by: John Crispin --- arch/mips/include/asm/mach-ralink/mt7620.h | 11 ++ arch/mips/ralink/Kconfig | 2 +- arch/mips/ralink/mt7620.c | 266 +++++++++++++++++++++++----- 3 files changed, 232 insertions(+), 47 deletions(-) --- a/arch/mips/include/asm/mach-ralink/mt7620.h +++ b/arch/mips/include/asm/mach-ralink/mt7620.h @@ -13,6 +13,13 @@ #ifndef _MT7620_REGS_H_ #define _MT7620_REGS_H_ +enum mt762x_soc_type { + MT762X_SOC_UNKNOWN = 0, + MT762X_SOC_MT7620A, + MT762X_SOC_MT7620N, + MT762X_SOC_MT7628AN, +}; + #define MT7620_SYSC_BASE 0x10000000 #define SYSC_REG_CHIP_NAME0 0x00 @@ -27,6 +34,7 @@ #define MT7620_CHIP_NAME0 0x3637544d #define MT7620_CHIP_NAME1 0x20203032 +#define MT7628_CHIP_NAME1 0x20203832 #define SYSCFG0_XTAL_FREQ_SEL BIT(6) @@ -71,6 +79,9 @@ #define SYSCFG0_DRAM_TYPE_DDR1 1 #define SYSCFG0_DRAM_TYPE_DDR2 2 +#define SYSCFG0_DRAM_TYPE_DDR2_MT7628 0 +#define SYSCFG0_DRAM_TYPE_DDR1_MT7628 1 + #define MT7620_DRAM_BASE 0x0 #define MT7620_SDRAM_SIZE_MIN 2 #define MT7620_SDRAM_SIZE_MAX 64 --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -41,7 +41,7 @@ choice select HW_HAS_PCI config SOC_MT7620 - bool "MT7620" + bool "MT7620/8" config SOC_MT7621 bool "MT7621" --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -42,6 +42,8 @@ #define CLKCFG_FFRAC_MASK 0x001f #define CLKCFG_FFRAC_USB_VAL 0x0003 +enum mt762x_soc_type mt762x_soc; + /* does the board have sdram or ddram */ static int dram_type; @@ -159,6 +161,125 @@ struct ralink_pinmux rt_gpio_pinmux = { .uart_mask = MT7620_GPIO_MODE_UART0_MASK, }; +static struct rt2880_pmx_func pwm1_grp_mt7628[] = { + FUNC("sdxc", 3, 19, 1), + FUNC("utif", 2, 19, 1), + FUNC("gpio", 1, 19, 1), + FUNC("pwm", 0, 19, 1), +}; + +static struct rt2880_pmx_func pwm0_grp_mt7628[] = { + FUNC("sdxc", 3, 18, 1), + FUNC("utif", 2, 18, 1), + FUNC("gpio", 1, 18, 1), + FUNC("pwm", 0, 18, 1), +}; + +static struct rt2880_pmx_func uart2_grp_mt7628[] = { + FUNC("sdxc", 3, 20, 2), + FUNC("pwm", 2, 20, 2), + FUNC("gpio", 1, 20, 2), + FUNC("uart2", 0, 20, 2), +}; + +static struct rt2880_pmx_func uart1_grp_mt7628[] = { + FUNC("sdxc", 3, 45, 2), + FUNC("pwm", 2, 45, 2), + FUNC("gpio", 1, 45, 2), + FUNC("uart1", 0, 45, 2), +}; + +static struct rt2880_pmx_func i2c_grp_mt7628[] = { + FUNC("-", 3, 4, 2), + FUNC("debug", 2, 4, 2), + FUNC("gpio", 1, 4, 2), + FUNC("i2c", 0, 4, 2), +}; + +static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) }; +static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) }; +static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) }; +static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) }; + +static struct rt2880_pmx_func sd_mode_grp_mt7628[] = { + FUNC("jtag", 3, 22, 8), + FUNC("utif", 2, 22, 8), + FUNC("gpio", 1, 22, 8), + FUNC("sdxc", 0, 22, 8), +}; + +static struct rt2880_pmx_func uart0_grp_mt7628[] = { + FUNC("-", 3, 12, 2), + FUNC("-", 2, 12, 2), + FUNC("gpio", 1, 12, 2), + FUNC("uart0", 0, 12, 2), +}; + +static struct rt2880_pmx_func i2s_grp_mt7628[] = { + FUNC("antenna", 3, 0, 4), + FUNC("pcm", 2, 0, 4), + FUNC("gpio", 1, 0, 4), + FUNC("i2s", 0, 0, 4), +}; + +static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = { + FUNC("-", 3, 6, 1), + FUNC("refclk", 2, 6, 1), + FUNC("gpio", 1, 6, 1), + FUNC("spi", 0, 6, 1), +}; + +static struct rt2880_pmx_func spis_grp_mt7628[] = { + FUNC("pwm", 3, 14, 4), + FUNC("util", 2, 14, 4), + FUNC("gpio", 1, 14, 4), + FUNC("spis", 0, 14, 4), +}; + +static struct rt2880_pmx_func gpio_grp_mt7628[] = { + FUNC("pcie", 3, 11, 1), + FUNC("refclk", 2, 11, 1), + FUNC("gpio", 1, 11, 1), + FUNC("gpio", 0, 11, 1), +}; + +#define MT7628_GPIO_MODE_MASK 0x3 + +#define MT7628_GPIO_MODE_PWM1 30 +#define MT7628_GPIO_MODE_PWM0 28 +#define MT7628_GPIO_MODE_UART2 26 +#define MT7628_GPIO_MODE_UART1 24 +#define MT7628_GPIO_MODE_I2C 20 +#define MT7628_GPIO_MODE_REFCLK 18 +#define MT7628_GPIO_MODE_PERST 16 +#define MT7628_GPIO_MODE_WDT 14 +#define MT7628_GPIO_MODE_SPI 12 +#define MT7628_GPIO_MODE_SDMODE 10 +#define MT7628_GPIO_MODE_UART0 8 +#define MT7628_GPIO_MODE_I2S 6 +#define MT7628_GPIO_MODE_CS1 4 +#define MT7628_GPIO_MODE_SPIS 2 +#define MT7628_GPIO_MODE_GPIO 0 + +static struct rt2880_pmx_group mt7628an_pinmux_data[] = { + GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM1), + GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM0), + GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART2), + GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART1), + GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_I2C), + GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK), + GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST), + GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT), + GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI), + GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_SDMODE), + GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART0), + GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_I2S), + GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_CS1), + GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_SPIS), + GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_GPIO), + { 0 } +}; + static __init u32 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) { @@ -309,29 +430,42 @@ void __init ralink_clk_init(void) xtal_rate = mt7620_get_xtal_rate(); - cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate); - pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate); - - cpu_rate = mt7620_get_cpu_rate(pll_rate); - dram_rate = mt7620_get_dram_rate(pll_rate); - sys_rate = mt7620_get_sys_rate(cpu_rate); - periph_rate = mt7620_get_periph_rate(xtal_rate); - #define RFMT(label) label ":%lu.%03luMHz " #define RINT(x) ((x) / 1000000) #define RFRAC(x) (((x) / 1000) % 1000) - pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"), - RINT(xtal_rate), RFRAC(xtal_rate), - RINT(cpu_pll_rate), RFRAC(cpu_pll_rate), - RINT(pll_rate), RFRAC(pll_rate)); + if (mt762x_soc == MT762X_SOC_MT7628AN) { + if (xtal_rate == MHZ(40)) + cpu_rate = MHZ(580); + else + cpu_rate = MHZ(575); + dram_rate = sys_rate = cpu_rate / 3; + periph_rate = MHZ(40); + + ralink_clk_add("10000d00.uartlite", periph_rate); + ralink_clk_add("10000e00.uartlite", periph_rate); + } else { + cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate); + pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate); + + cpu_rate = mt7620_get_cpu_rate(pll_rate); + dram_rate = mt7620_get_dram_rate(pll_rate); + sys_rate = mt7620_get_sys_rate(cpu_rate); + periph_rate = mt7620_get_periph_rate(xtal_rate); + + pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"), + RINT(xtal_rate), RFRAC(xtal_rate), + RINT(cpu_pll_rate), RFRAC(cpu_pll_rate), + RINT(pll_rate), RFRAC(pll_rate)); + + ralink_clk_add("10000500.uart", periph_rate); + } pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"), RINT(cpu_rate), RFRAC(cpu_rate), RINT(dram_rate), RFRAC(dram_rate), RINT(sys_rate), RFRAC(sys_rate), RINT(periph_rate), RFRAC(periph_rate)); - #undef RFRAC #undef RINT #undef RFMT @@ -339,12 +473,13 @@ void __init ralink_clk_init(void) ralink_clk_add("cpu", cpu_rate); ralink_clk_add("10000100.timer", periph_rate); ralink_clk_add("10000120.watchdog", periph_rate); - ralink_clk_add("10000500.uart", periph_rate); ralink_clk_add("10000b00.spi", sys_rate); ralink_clk_add("10000c00.uartlite", periph_rate); + ralink_clk_add("10000d00.uart1", periph_rate); + ralink_clk_add("10000e00.uart2", periph_rate); ralink_clk_add("10180000.wmac", xtal_rate); - if (IS_ENABLED(CONFIG_USB)) { + if (IS_ENABLED(CONFIG_USB) && mt762x_soc != MT762X_SOC_MT7628AN) { /* * When the CPU goes into sleep mode, the BUS clock will be too low for * USB to function properly @@ -367,6 +502,52 @@ void __init ralink_of_remap(void) panic("Failed to remap core resources"); } +static __init void +mt7620_dram_init(struct ralink_soc_info *soc_info) +{ + switch (dram_type) { + case SYSCFG0_DRAM_TYPE_SDRAM: + pr_info("Board has SDRAM\n"); + soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN; + soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX; + break; + + case SYSCFG0_DRAM_TYPE_DDR1: + pr_info("Board has DDR1\n"); + soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; + soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; + break; + + case SYSCFG0_DRAM_TYPE_DDR2: + pr_info("Board has DDR2\n"); + soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; + soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; + break; + default: + BUG(); + } +} + +static __init void +mt7628_dram_init(struct ralink_soc_info *soc_info) +{ + switch (dram_type) { + case SYSCFG0_DRAM_TYPE_DDR1_MT7628: + pr_info("Board has DDR1\n"); + soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; + soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; + break; + + case SYSCFG0_DRAM_TYPE_DDR2_MT7628: + pr_info("Board has DDR2\n"); + soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; + soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; + break; + default: + BUG(); + } +} + void prom_soc_init(struct ralink_soc_info *soc_info) { void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE); @@ -384,18 +565,25 @@ void prom_soc_init(struct ralink_soc_inf rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK; - if (n0 != MT7620_CHIP_NAME0 || n1 != MT7620_CHIP_NAME1) - panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1); - - if (bga) { - name = "MT7620A"; - soc_info->compatible = "ralink,mt7620a-soc"; - } else { - name = "MT7620N"; - soc_info->compatible = "ralink,mt7620n-soc"; + if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) { + if (bga) { + mt762x_soc = MT762X_SOC_MT7620A; + name = "MT7620A"; + soc_info->compatible = "ralink,mt7620a-soc"; + } else { + mt762x_soc = MT762X_SOC_MT7620N; + name = "MT7620N"; + soc_info->compatible = "ralink,mt7620n-soc"; #ifdef CONFIG_PCI - panic("mt7620n is only supported for non pci kernels"); + panic("mt7620n is only supported for non pci kernels"); #endif + } + } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) { + mt762x_soc = MT762X_SOC_MT7628AN; + name = "MT7628AN"; + soc_info->compatible = "ralink,mt7628an-soc"; + } else { + panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); } snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, @@ -407,28 +595,11 @@ void prom_soc_init(struct ralink_soc_inf cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; - switch (dram_type) { - case SYSCFG0_DRAM_TYPE_SDRAM: - pr_info("Board has SDRAM\n"); - soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN; - soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX; - break; - - case SYSCFG0_DRAM_TYPE_DDR1: - pr_info("Board has DDR1\n"); - soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; - soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; - break; - - case SYSCFG0_DRAM_TYPE_DDR2: - pr_info("Board has DDR2\n"); - soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; - soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; - break; - default: - BUG(); - } soc_info->mem_base = MT7620_DRAM_BASE; + if (mt762x_soc == MT762X_SOC_MT7628AN) + mt7628_dram_init(soc_info); + else + mt7620_dram_init(soc_info); pmu0 = __raw_readl(sysc + PMU0_CFG); pmu1 = __raw_readl(sysc + PMU1_CFG); @@ -437,4 +608,9 @@ void prom_soc_init(struct ralink_soc_inf (pmu0 & PMU_SW_SET) ? ("sw") : ("hw")); pr_info("Digital PMU set to %s control\n", (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); + + if (mt762x_soc == MT762X_SOC_MT7628AN) + rt2880_pinmux_data = mt7628an_pinmux_data; + else + rt2880_pinmux_data = mt7620a_pinmux_data; }