Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [v3,12/13] cpufreq: Add module to register cpufreq on Krait CPUs From: Stephen Boyd X-Patchwork-Id: 6063191 Message-Id: <1426920332-9340-13-git-send-email-sboyd@codeaurora.org> To: Mike Turquette , Stephen Boyd Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Viresh Kumar , Date: Fri, 20 Mar 2015 23:45:31 -0700 Register a cpufreq-generic device whenever we detect that a "qcom,krait" compatible CPU is present in DT. Cc: Signed-off-by: Stephen Boyd --- .../devicetree/bindings/arm/msm/qcom,pvs.txt | 38 ++++ drivers/cpufreq/Kconfig.arm | 9 + drivers/cpufreq/Makefile | 1 + drivers/cpufreq/qcom-cpufreq.c | 204 +++++++++++++++++++++ 4 files changed, 252 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt create mode 100644 drivers/cpufreq/qcom-cpufreq.c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt @@ -0,0 +1,38 @@ +Qualcomm Process Voltage Scaling Tables + +The node name is required to be "qcom,pvs". There shall only be one +such node present in the root of the tree. + +PROPERTIES + +- qcom,pvs-format-a or qcom,pvs-format-b: + Usage: required + Value type: + Definition: Indicates the format of qcom,speedX-pvsY-bin-vZ properties. + If qcom,pvs-format-a is used the table is two columns + (frequency and voltage in that order). If qcom,pvs-format-b is used the table is three columns (frequency, voltage, + and current in that order). + +- qcom,speedX-pvsY-bin-vZ: + Usage: required + Value type: + Definition: The PVS table corresponding to the speed bin X, pvs bin Y, + and version Z. +Example: + + qcom,pvs { + qcom,pvs-format-a; + qcom,speed0-pvs0-bin-v0 = + < 384000000 950000 >, + < 486000000 975000 >, + < 594000000 1000000 >, + < 702000000 1025000 >, + < 810000000 1075000 >, + < 918000000 1100000 >, + < 1026000000 1125000 >, + < 1134000000 1175000 >, + < 1242000000 1200000 >, + < 1350000000 1225000 >, + < 1458000000 1237500 >, + < 1512000000 1250000 >; + }; --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -129,6 +129,15 @@ config ARM_OMAP2PLUS_CPUFREQ depends on ARCH_OMAP2PLUS default ARCH_OMAP2PLUS +config ARM_QCOM_CPUFREQ + tristate "Qualcomm based" + depends on ARCH_QCOM + select PM_OPP + help + This adds the CPUFreq driver for Qualcomm SoC based boards. + + If in doubt, say N. + config ARM_S3C_CPUFREQ bool help --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -64,6 +64,7 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += o obj-$(CONFIG_PXA25x) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA27x) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o +obj-$(CONFIG_ARM_QCOM_CPUFREQ) += qcom-cpufreq.o obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o --- /dev/null +++ b/drivers/cpufreq/qcom-cpufreq.c @@ -0,0 +1,204 @@ +/* Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver) +{ + void __iomem *base; + u32 pte_efuse; + + *speed = *pvs = *pvs_ver = 0; + + base = ioremap(0x007000c0, 4); + if (!base) { + pr_warn("Unable to read efuse data. Defaulting to 0!\n"); + return; + } + + pte_efuse = readl_relaxed(base); + iounmap(base); + + *speed = pte_efuse & 0xf; + if (*speed == 0xf) + *speed = (pte_efuse >> 4) & 0xf; + + if (*speed == 0xf) { + *speed = 0; + pr_warn("Speed bin: Defaulting to %d\n", *speed); + } else { + pr_info("Speed bin: %d\n", *speed); + } + + *pvs = (pte_efuse >> 10) & 0x7; + if (*pvs == 0x7) + *pvs = (pte_efuse >> 13) & 0x7; + + if (*pvs == 0x7) { + *pvs = 0; + pr_warn("PVS bin: Defaulting to %d\n", *pvs); + } else { + pr_info("PVS bin: %d\n", *pvs); + } +} + +static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver) +{ + u32 pte_efuse, redundant_sel; + void __iomem *base; + + *speed = 0; + *pvs = 0; + *pvs_ver = 0; + + base = ioremap(0xfc4b80b0, 8); + if (!base) { + pr_warn("Unable to read efuse data. Defaulting to 0!\n"); + return; + } + + pte_efuse = readl_relaxed(base); + redundant_sel = (pte_efuse >> 24) & 0x7; + *speed = pte_efuse & 0x7; + /* 4 bits of PVS are in efuse register bits 31, 8-6. */ + *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); + *pvs_ver = (pte_efuse >> 4) & 0x3; + + switch (redundant_sel) { + case 1: + *speed = (pte_efuse >> 27) & 0xf; + break; + case 2: + *pvs = (pte_efuse >> 27) & 0xf; + break; + } + + /* Check SPEED_BIN_BLOW_STATUS */ + if (pte_efuse & BIT(3)) { + pr_info("Speed bin: %d\n", *speed); + } else { + pr_warn("Speed bin not set. Defaulting to 0!\n"); + *speed = 0; + } + + /* Check PVS_BLOW_STATUS */ + pte_efuse = readl_relaxed(base + 0x4) & BIT(21); + if (pte_efuse) { + pr_info("PVS bin: %d\n", *pvs); + } else { + pr_warn("PVS bin not set. Defaulting to 0!\n"); + *pvs = 0; + } + + pr_info("PVS version: %d\n", *pvs_ver); + iounmap(base); +} + +static int __init qcom_cpufreq_populate_opps(void) +{ + int len, rows, cols, i, k, speed, pvs, pvs_ver; + char table_name[] = "qcom,speedXX-pvsXX-bin-vXX"; + struct device_node *np; + struct device *dev; + int cpu = 0; + + np = of_find_node_by_name(NULL, "qcom,pvs"); + if (!np) + return -ENODEV; + + if (of_property_read_bool(np, "qcom,pvs-format-a")) { + get_krait_bin_format_a(&speed, &pvs, &pvs_ver); + cols = 2; + } else if (of_property_read_bool(np, "qcom,pvs-format-b")) { + get_krait_bin_format_b(&speed, &pvs, &pvs_ver); + cols = 3; + } else { + return -ENODEV; + } + + snprintf(table_name, sizeof(table_name), + "qcom,speed%d-pvs%d-bin-v%d", speed, pvs, pvs_ver); + + if (!of_find_property(np, table_name, &len)) + return -EINVAL; + + len /= sizeof(u32); + if (len % cols || len == 0) + return -EINVAL; + + rows = len / cols; + + for (i = 0, k = 0; i < rows; i++) { + u32 freq, volt; + + of_property_read_u32_index(np, table_name, k++, &freq); + of_property_read_u32_index(np, table_name, k++, &volt); + while (k % cols) + k++; /* Skip uA entries if present */ + for (cpu = 0; cpu < num_possible_cpus(); cpu++) { + dev = get_cpu_device(cpu); + if (!dev) + return -ENODEV; + if (dev_pm_opp_add(dev, freq, volt)) + pr_warn("failed to add OPP %u\n", freq); + } + } + + return 0; +} + +static int __init qcom_cpufreq_driver_init(void) +{ + struct cpufreq_dt_platform_data pdata = { .independent_clocks = true }; + struct platform_device_info devinfo = { + .name = "cpufreq-dt", + .data = &pdata, + .size_data = sizeof(pdata), + }; + struct device *cpu_dev; + struct device_node *np; + int ret; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) + return -ENODEV; + + np = of_node_get(cpu_dev->of_node); + if (!np) + return -ENOENT; + + if (!of_device_is_compatible(np, "qcom,krait")) { + of_node_put(np); + return -ENODEV; + } + of_node_put(np); + + ret = qcom_cpufreq_populate_opps(); + if (ret) + return ret; + + return PTR_ERR_OR_ZERO(platform_device_register_full(&devinfo)); +} +module_init(qcom_cpufreq_driver_init); + +MODULE_DESCRIPTION("Qualcomm CPUfreq driver"); +MODULE_LICENSE("GPL v2");