--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt @@ -6,7 +6,8 @@ configuration settings. The mode settin the 4 GSBI IOs. Required properties: -- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064 +- compatible: Should contain "qcom,gsbi-v1.0.0" +- cell-index: Should contain the GSBI index - reg: Address range for GSBI registers - clocks: required clock - clock-names: must contain "iface" entry @@ -16,6 +17,8 @@ Required properties: Optional properties: - qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. +- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses + dma. Required properties if child node exists: - #address-cells: Must be 1 @@ -39,6 +42,7 @@ Example for APQ8064: gsbi4@16300000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; reg = <0x16300000 0x100>; clocks = <&gcc GSBI4_H_CLK>; clock-names = "iface"; @@ -48,6 +52,8 @@ Example for APQ8064: qcom,mode = ; qcom,crci = ; + syscon-tcsr = <&tcsr>; + /* child nodes go under here */ i2c_qup4: i2c@16380000 { @@ -76,3 +82,9 @@ Example for APQ8064: }; }; + tcsr: syscon@1a400000 { + compatible = "qcom,apq8064-tcsr", "syscon"; + reg = <0x1a400000 0x100>; + }; + + --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -4,6 +4,7 @@ config QCOM_GSBI tristate "QCOM General Serial Bus Interface" depends on ARCH_QCOM + select MFD_SYSCON help Say y here to enable GSBI support. The GSBI provides control functions for connecting the underlying serial UART, SPI, and I2C --- a/drivers/soc/qcom/qcom_gsbi.c +++ b/drivers/soc/qcom/qcom_gsbi.c @@ -18,22 +18,129 @@ #include #include #include +#include +#include +#include #define GSBI_CTRL_REG 0x0000 #define GSBI_PROTOCOL_SHIFT 4 +#define MAX_GSBI 12 + +#define TCSR_ADM_CRCI_BASE 0x70 + +struct crci_config { + u32 num_rows; + const u32 (*array)[MAX_GSBI]; +}; + +static const u32 crci_ipq8064[][MAX_GSBI] = { + { + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, + { + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, +}; + +static const struct crci_config config_ipq8064 = { + .num_rows = ARRAY_SIZE(crci_ipq8064), + .array = crci_ipq8064, +}; + +static const unsigned int crci_apq8064[][MAX_GSBI] = { + { + 0x001800, 0x006000, 0x000030, 0x0000c0, + 0x000300, 0x000400, 0x000000, 0x000000, + 0x000000, 0x000000, 0x000000, 0x000000 + }, + { + 0x000000, 0x000000, 0x000000, 0x000000, + 0x000000, 0x000020, 0x0000c0, 0x000000, + 0x000000, 0x000000, 0x000000, 0x000000 + }, +}; + +static const struct crci_config config_apq8064 = { + .num_rows = ARRAY_SIZE(crci_apq8064), + .array = crci_apq8064, +}; + +static const unsigned int crci_msm8960[][MAX_GSBI] = { + { + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000400, 0x000000, 0x000000, + 0x000000, 0x000000, 0x000000, 0x000000 + }, + { + 0x000000, 0x000000, 0x000000, 0x000000, + 0x000000, 0x000020, 0x0000c0, 0x000300, + 0x001800, 0x006000, 0x000000, 0x000000 + }, +}; + +static const struct crci_config config_msm8960 = { + .num_rows = ARRAY_SIZE(crci_msm8960), + .array = crci_msm8960, +}; + +static const unsigned int crci_msm8660[][MAX_GSBI] = { + { /* ADM 0 - B */ + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, + { /* ADM 0 - B */ + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, + { /* ADM 1 - A */ + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, + { /* ADM 1 - B */ + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, +}; + +static const struct crci_config config_msm8660 = { + .num_rows = ARRAY_SIZE(crci_msm8660), + .array = crci_msm8660, +}; struct gsbi_info { struct clk *hclk; u32 mode; u32 crci; + struct regmap *tcsr; +}; + +static const struct of_device_id tcsr_dt_match[] = { + { .compatible = "qcom,tcsr-ipq8064", .data = &config_ipq8064}, + { .compatible = "qcom,tcsr-apq8064", .data = &config_apq8064}, + { .compatible = "qcom,tcsr-msm8960", .data = &config_msm8960}, + { .compatible = "qcom,tcsr-msm8660", .data = &config_msm8660}, + { }, }; static int gsbi_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; + struct device_node *tcsr_node; + const struct of_device_id *match; struct resource *res; void __iomem *base; struct gsbi_info *gsbi; + int i; + u32 mask, gsbi_num; + const struct crci_config *config = NULL; gsbi = devm_kzalloc(&pdev->dev, sizeof(*gsbi), GFP_KERNEL); @@ -45,6 +152,32 @@ static int gsbi_probe(struct platform_de if (IS_ERR(base)) return PTR_ERR(base); + /* get the tcsr node and setup the config and regmap */ + gsbi->tcsr = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr"); + + if (!IS_ERR(gsbi->tcsr)) { + tcsr_node = of_parse_phandle(node, "syscon-tcsr", 0); + if (tcsr_node) { + match = of_match_node(tcsr_dt_match, tcsr_node); + if (match) + config = match->data; + else + dev_warn(&pdev->dev, "no matching TCSR\n"); + + of_node_put(tcsr_node); + } + } + + if (of_property_read_u32(node, "cell-index", &gsbi_num)) { + dev_err(&pdev->dev, "missing cell-index\n"); + return -EINVAL; + } + + if (gsbi_num < 1 || gsbi_num > MAX_GSBI) { + dev_err(&pdev->dev, "invalid cell-index\n"); + return -EINVAL; + } + if (of_property_read_u32(node, "qcom,mode", &gsbi->mode)) { dev_err(&pdev->dev, "missing mode configuration\n"); return -EINVAL; @@ -64,6 +197,25 @@ static int gsbi_probe(struct platform_de writel_relaxed((gsbi->mode << GSBI_PROTOCOL_SHIFT) | gsbi->crci, base + GSBI_CTRL_REG); + /* + * modify tcsr to reflect mode and ADM CRCI mux + * Each gsbi contains a pair of bits, one for RX and one for TX + * SPI mode requires both bits cleared, otherwise they are set + */ + if (config) { + for (i = 0; i < config->num_rows; i++) { + mask = config->array[i][gsbi_num - 1]; + + if (gsbi->mode == GSBI_PROT_SPI) + regmap_update_bits(gsbi->tcsr, + TCSR_ADM_CRCI_BASE + 4 * i, mask, 0); + else + regmap_update_bits(gsbi->tcsr, + TCSR_ADM_CRCI_BASE + 4 * i, mask, mask); + + } + } + /* make sure the gsbi control write is not reordered */ wmb();