From 626d9efa74685720020e816f3a917b7591d3cf7a Mon Sep 17 00:00:00 2001
From: James <>
Date: Sat, 26 Sep 2015 12:29:31 +0100
Subject: trunk-47048

---
 target/linux/ramips/dts/WHR-1166D.dts | 172 ++++++++++++++++++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644 target/linux/ramips/dts/WHR-1166D.dts

(limited to 'target/linux/ramips/dts/WHR-1166D.dts')

diff --git a/target/linux/ramips/dts/WHR-1166D.dts b/target/linux/ramips/dts/WHR-1166D.dts
new file mode 100644
index 0000000..69b8641
--- /dev/null
+++ b/target/linux/ramips/dts/WHR-1166D.dts
@@ -0,0 +1,172 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "ralink,mt7620a-soc";
+	model = "Buffalo WHR-1166D";
+
+	palmbus@10000000 {
+		gpio2: gpio@660 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "en25q64";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "mx25l6405d";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0xfb0000>;
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "uartf", "wled", "nd_sd";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+		port@5 {
+			status = "okay";
+			phy-handle = <&phy5>;
+			phy-mode = "rgmii";
+		};
+
+		mdio-bus {
+			status = "okay";
+
+			phy5: ethernet-phy@5 {
+				reg = <5>;
+				phy-mode = "rgmii";
+			};
+		};
+	};
+
+	gsw@10110000 {
+		ralink,port4 = "ephy";
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	pcie@10140000 {
+		status = "okay";
+
+		pcie-bridge {
+			mt76@0,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 32768>;
+				mediatek,2ghz = <0>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "whr-1166d:red:power";
+			gpios = <&gpio0 7 1>;
+		};
+
+		wifi {
+			label = "whr-1166d:green:wifi";
+			gpios = <&gpio0 8 1>;
+		};
+
+		power2 {
+			label = "whr-1166d:green:power";
+			gpios = <&gpio0 9 1>;
+		};
+
+		wifi2 {
+			label = "whr-1166d:orange:wifi";
+			gpios = <&gpio0 10 1>;
+		};
+
+		internet {
+			label = "whr-1166d:green:internet";
+			gpios = <&gpio2 17 1>;
+		};
+
+		router {
+			label = "whr-1166d:orange:router";
+			gpios = <&gpio2 18 1>;
+		};
+
+		router2 {
+			label = "whr-1166d:green:router";
+			gpios = <&gpio2 19 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio2 12 1>;
+			linux,code = <0x198>;
+		};
+
+		aoss {
+			label = "aoss";
+			gpios = <&gpio2 13 1>;
+			linux,code = <0x211>;
+		};
+
+		ap {
+			label = "ap";
+			gpios = <&gpio2 14 1>;
+			linux,code = <0x100>;
+			linux,input-type = <5>; /* EV_SW */
+		};
+
+		bridge {
+			label = "bridge";
+			gpios = <&gpio2 15 1>;
+			linux,code = <0x100>;
+			linux,input-type = <5>; /* EV_SW */
+		};
+	};
+};
-- 
cgit v1.2.3