From 626d9efa74685720020e816f3a917b7591d3cf7a Mon Sep 17 00:00:00 2001 From: James <> Date: Sat, 26 Sep 2015 12:29:31 +0100 Subject: trunk-47048 --- target/linux/ramips/dts/AR670W.dts | 105 +++++++++++++++++++++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 target/linux/ramips/dts/AR670W.dts (limited to 'target/linux/ramips/dts/AR670W.dts') diff --git a/target/linux/ramips/dts/AR670W.dts b/target/linux/ramips/dts/AR670W.dts new file mode 100644 index 0000000..0e29d89 --- /dev/null +++ b/target/linux/ramips/dts/AR670W.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +/include/ "rt2880.dtsi" + +/ { + compatible = "AR670W", "ralink,rt2880-soc"; + model = "Airlink101 AR670W"; + + palmbus@300000 { + gpio0: gpio@600 { + status = "okay"; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi", "uartlite"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@400000 { + status = "okay"; + mtd-mac-address = <&factory 0x2004>; + + port@0 { + phy-handle = <&phy0>; + phy-mode = "mii"; + }; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@0 { + phy-mode = "mii"; + reg = <0>; + }; + }; + }; + + wmac@480000 { + status = "okay"; + ralink,mtd-eeprom = <&factory 0x2000>; + }; + + cfi@bdc00000 { + compatible = "cfi-flash"; + reg = <0xbc400000 0x800000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0x30000>; + label = "u-boot"; + read-only; + }; + + factory: factory@30000 { + reg = <0x30000 0x10000>; + label = "factory"; + read-only; + }; + + firmware@40000 { + reg = <0x40000 0x3c0000>; + label = "firmware"; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status { + label = "ar670w:green:power"; + gpios = <&gpio0 7 1>; + }; + + wpsblue { + label = "ar670w:blue:wps"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + + reset { + label = "reset"; + gpios = <&gpio0 9 1>; + linux,code = <0x198>; + }; + }; +}; -- cgit v1.2.3