From 6632619d49f0f90c4d74caad67749864f154cae4 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Fri, 31 Jan 2014 16:21:56 +0200 Subject: [PATCH 090/182] ARM: dts: msm: Add SDHC controller nodes for MSM8974 and DB8074 board Add support for the 2 SDHC controllers on the DB8074 board. The first controller (at 0xf9824900) is connected to an on board soldered eMMC. The second controller (at 0xf98a4900) is connected to a uSD card slot. Signed-off-by: Georgi Djakov Signed-off-by: Kumar Gala --- arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 13 +++++++++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 22 ++++++++++++++++++++++ 2 files changed, 35 insertions(+) --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -3,4 +3,17 @@ / { model = "Qualcomm APQ8074 Dragonboard"; compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; + + soc: soc { + sdhci@f9824900 { + bus-width = <8>; + non-removable; + status = "ok"; + }; + + sdhci@f98a4900 { + cd-gpios = <&msmgpio 62 0x1>; + bus-width = <4>; + }; + }; }; --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -192,6 +192,28 @@ clock-names = "core", "iface"; }; + sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + rng@f9bff000 { compatible = "qcom,prng"; reg = <0xf9bff000 0x200>;