From 226eff10dc11af5d6b1bc31e5cedc079aa564fb3 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Thu, 13 Mar 2014 19:07:43 -0700 Subject: [PATCH 060/182] i2c: qup: New bus driver for the Qualcomm QUP I2C controller This bus driver supports the QUP i2c hardware controller in the Qualcomm SOCs. The Qualcomm Universal Peripheral Engine (QUP) is a general purpose data path engine with input/output FIFOs and an embedded i2c mini-core. The driver supports FIFO mode (for low bandwidth applications) and block mode (interrupt generated for each block-size data transfer). Signed-off-by: Ivan T. Ivanov Signed-off-by: Bjorn Andersson Reviewed-by: Andy Gross Tested-by: Philip Elcan [wsa: removed needless IS_ERR_VALUE] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-qup.c | 768 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 779 insertions(+) create mode 100644 drivers/i2c/busses/i2c-qup.c --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -649,6 +649,16 @@ config I2C_PXA_SLAVE is necessary for systems where the PXA may be a target on the I2C bus. +config I2C_QUP + tristate "Qualcomm QUP based I2C controller" + depends on ARCH_QCOM + help + If you say yes to this option, support will be included for the + built-in I2C interface on the Qualcomm SoCs. + + This driver can also be built as a module. If so, the module + will be called i2c-qup. + config I2C_RIIC tristate "Renesas RIIC adapter" depends on ARCH_SHMOBILE || COMPILE_TEST --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o +obj-$(CONFIG_I2C_QUP) += i2c-qup.o obj-$(CONFIG_I2C_RIIC) += i2c-riic.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_S6000) += i2c-s6000.o --- /dev/null +++ b/drivers/i2c/busses/i2c-qup.c @@ -0,0 +1,768 @@ +/* + * Copyright (c) 2009-2013, The Linux Foundation. All rights reserved. + * Copyright (c) 2014, Sony Mobile Communications AB. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* QUP Registers */ +#define QUP_CONFIG 0x000 +#define QUP_STATE 0x004 +#define QUP_IO_MODE 0x008 +#define QUP_SW_RESET 0x00c +#define QUP_OPERATIONAL 0x018 +#define QUP_ERROR_FLAGS 0x01c +#define QUP_ERROR_FLAGS_EN 0x020 +#define QUP_HW_VERSION 0x030 +#define QUP_MX_OUTPUT_CNT 0x100 +#define QUP_OUT_FIFO_BASE 0x110 +#define QUP_MX_WRITE_CNT 0x150 +#define QUP_MX_INPUT_CNT 0x200 +#define QUP_MX_READ_CNT 0x208 +#define QUP_IN_FIFO_BASE 0x218 +#define QUP_I2C_CLK_CTL 0x400 +#define QUP_I2C_STATUS 0x404 + +/* QUP States and reset values */ +#define QUP_RESET_STATE 0 +#define QUP_RUN_STATE 1 +#define QUP_PAUSE_STATE 3 +#define QUP_STATE_MASK 3 + +#define QUP_STATE_VALID BIT(2) +#define QUP_I2C_MAST_GEN BIT(4) + +#define QUP_OPERATIONAL_RESET 0x000ff0 +#define QUP_I2C_STATUS_RESET 0xfffffc + +/* QUP OPERATIONAL FLAGS */ +#define QUP_I2C_NACK_FLAG BIT(3) +#define QUP_OUT_NOT_EMPTY BIT(4) +#define QUP_IN_NOT_EMPTY BIT(5) +#define QUP_OUT_FULL BIT(6) +#define QUP_OUT_SVC_FLAG BIT(8) +#define QUP_IN_SVC_FLAG BIT(9) +#define QUP_MX_OUTPUT_DONE BIT(10) +#define QUP_MX_INPUT_DONE BIT(11) + +/* I2C mini core related values */ +#define QUP_CLOCK_AUTO_GATE BIT(13) +#define I2C_MINI_CORE (2 << 8) +#define I2C_N_VAL 15 +/* Most significant word offset in FIFO port */ +#define QUP_MSW_SHIFT (I2C_N_VAL + 1) + +/* Packing/Unpacking words in FIFOs, and IO modes */ +#define QUP_OUTPUT_BLK_MODE (1 << 10) +#define QUP_INPUT_BLK_MODE (1 << 12) +#define QUP_UNPACK_EN BIT(14) +#define QUP_PACK_EN BIT(15) + +#define QUP_REPACK_EN (QUP_UNPACK_EN | QUP_PACK_EN) + +#define QUP_OUTPUT_BLOCK_SIZE(x)(((x) >> 0) & 0x03) +#define QUP_OUTPUT_FIFO_SIZE(x) (((x) >> 2) & 0x07) +#define QUP_INPUT_BLOCK_SIZE(x) (((x) >> 5) & 0x03) +#define QUP_INPUT_FIFO_SIZE(x) (((x) >> 7) & 0x07) + +/* QUP tags */ +#define QUP_TAG_START (1 << 8) +#define QUP_TAG_DATA (2 << 8) +#define QUP_TAG_STOP (3 << 8) +#define QUP_TAG_REC (4 << 8) + +/* Status, Error flags */ +#define I2C_STATUS_WR_BUFFER_FULL BIT(0) +#define I2C_STATUS_BUS_ACTIVE BIT(8) +#define I2C_STATUS_ERROR_MASK 0x38000fc +#define QUP_STATUS_ERROR_FLAGS 0x7c + +#define QUP_READ_LIMIT 256 + +struct qup_i2c_dev { + struct device *dev; + void __iomem *base; + int irq; + struct clk *clk; + struct clk *pclk; + struct i2c_adapter adap; + + int clk_ctl; + int out_fifo_sz; + int in_fifo_sz; + int out_blk_sz; + int in_blk_sz; + + unsigned long one_byte_t; + + struct i2c_msg *msg; + /* Current posion in user message buffer */ + int pos; + /* I2C protocol errors */ + u32 bus_err; + /* QUP core errors */ + u32 qup_err; + + struct completion xfer; +}; + +static irqreturn_t qup_i2c_interrupt(int irq, void *dev) +{ + struct qup_i2c_dev *qup = dev; + u32 bus_err; + u32 qup_err; + u32 opflags; + + bus_err = readl(qup->base + QUP_I2C_STATUS); + qup_err = readl(qup->base + QUP_ERROR_FLAGS); + opflags = readl(qup->base + QUP_OPERATIONAL); + + if (!qup->msg) { + /* Clear Error interrupt */ + writel(QUP_RESET_STATE, qup->base + QUP_STATE); + return IRQ_HANDLED; + } + + bus_err &= I2C_STATUS_ERROR_MASK; + qup_err &= QUP_STATUS_ERROR_FLAGS; + + if (qup_err) { + /* Clear Error interrupt */ + writel(qup_err, qup->base + QUP_ERROR_FLAGS); + goto done; + } + + if (bus_err) { + /* Clear Error interrupt */ + writel(QUP_RESET_STATE, qup->base + QUP_STATE); + goto done; + } + + if (opflags & QUP_IN_SVC_FLAG) + writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL); + + if (opflags & QUP_OUT_SVC_FLAG) + writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL); + +done: + qup->qup_err = qup_err; + qup->bus_err = bus_err; + complete(&qup->xfer); + return IRQ_HANDLED; +} + +static int qup_i2c_poll_state_mask(struct qup_i2c_dev *qup, + u32 req_state, u32 req_mask) +{ + int retries = 1; + u32 state; + + /* + * State transition takes 3 AHB clocks cycles + 3 I2C master clock + * cycles. So retry once after a 1uS delay. + */ + do { + state = readl(qup->base + QUP_STATE); + + if (state & QUP_STATE_VALID && + (state & req_mask) == req_state) + return 0; + + udelay(1); + } while (retries--); + + return -ETIMEDOUT; +} + +static int qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 req_state) +{ + return qup_i2c_poll_state_mask(qup, req_state, QUP_STATE_MASK); +} + +static int qup_i2c_poll_state_valid(struct qup_i2c_dev *qup) +{ + return qup_i2c_poll_state_mask(qup, 0, 0); +} + +static int qup_i2c_poll_state_i2c_master(struct qup_i2c_dev *qup) +{ + return qup_i2c_poll_state_mask(qup, QUP_I2C_MAST_GEN, QUP_I2C_MAST_GEN); +} + +static int qup_i2c_change_state(struct qup_i2c_dev *qup, u32 state) +{ + if (qup_i2c_poll_state_valid(qup) != 0) + return -EIO; + + writel(state, qup->base + QUP_STATE); + + if (qup_i2c_poll_state(qup, state) != 0) + return -EIO; + return 0; +} + +static int qup_i2c_wait_writeready(struct qup_i2c_dev *qup) +{ + unsigned long timeout; + u32 opflags; + u32 status; + + timeout = jiffies + HZ; + + for (;;) { + opflags = readl(qup->base + QUP_OPERATIONAL); + status = readl(qup->base + QUP_I2C_STATUS); + + if (!(opflags & QUP_OUT_NOT_EMPTY) && + !(status & I2C_STATUS_BUS_ACTIVE)) + return 0; + + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + + usleep_range(qup->one_byte_t, qup->one_byte_t * 2); + } +} + +static void qup_i2c_set_write_mode(struct qup_i2c_dev *qup, struct i2c_msg *msg) +{ + /* Number of entries to shift out, including the start */ + int total = msg->len + 1; + + if (total < qup->out_fifo_sz) { + /* FIFO mode */ + writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); + writel(total, qup->base + QUP_MX_WRITE_CNT); + } else { + /* BLOCK mode (transfer data on chunks) */ + writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN, + qup->base + QUP_IO_MODE); + writel(total, qup->base + QUP_MX_OUTPUT_CNT); + } +} + +static void qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg) +{ + u32 addr = msg->addr << 1; + u32 qup_tag; + u32 opflags; + int idx; + u32 val; + + if (qup->pos == 0) { + val = QUP_TAG_START | addr; + idx = 1; + } else { + val = 0; + idx = 0; + } + + while (qup->pos < msg->len) { + /* Check that there's space in the FIFO for our pair */ + opflags = readl(qup->base + QUP_OPERATIONAL); + if (opflags & QUP_OUT_FULL) + break; + + if (qup->pos == msg->len - 1) + qup_tag = QUP_TAG_STOP; + else + qup_tag = QUP_TAG_DATA; + + if (idx & 1) + val |= (qup_tag | msg->buf[qup->pos]) << QUP_MSW_SHIFT; + else + val = qup_tag | msg->buf[qup->pos]; + + /* Write out the pair and the last odd value */ + if (idx & 1 || qup->pos == msg->len - 1) + writel(val, qup->base + QUP_OUT_FIFO_BASE); + + qup->pos++; + idx++; + } +} + +static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg) +{ + unsigned long left; + int ret; + + qup->msg = msg; + qup->pos = 0; + + enable_irq(qup->irq); + + qup_i2c_set_write_mode(qup, msg); + + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + goto err; + + writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); + + do { + ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); + if (ret) + goto err; + + qup_i2c_issue_write(qup, msg); + + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + goto err; + + left = wait_for_completion_timeout(&qup->xfer, HZ); + if (!left) { + writel(1, qup->base + QUP_SW_RESET); + ret = -ETIMEDOUT; + goto err; + } + + if (qup->bus_err || qup->qup_err) { + if (qup->bus_err & QUP_I2C_NACK_FLAG) + dev_err(qup->dev, "NACK from %x\n", msg->addr); + ret = -EIO; + goto err; + } + } while (qup->pos < msg->len); + + /* Wait for the outstanding data in the fifo to drain */ + ret = qup_i2c_wait_writeready(qup); + +err: + disable_irq(qup->irq); + qup->msg = NULL; + + return ret; +} + +static void qup_i2c_set_read_mode(struct qup_i2c_dev *qup, int len) +{ + if (len < qup->in_fifo_sz) { + /* FIFO mode */ + writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); + writel(len, qup->base + QUP_MX_READ_CNT); + } else { + /* BLOCK mode (transfer data on chunks) */ + writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN, + qup->base + QUP_IO_MODE); + writel(len, qup->base + QUP_MX_INPUT_CNT); + } +} + +static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg) +{ + u32 addr, len, val; + + addr = (msg->addr << 1) | 1; + + /* 0 is used to specify a length 256 (QUP_READ_LIMIT) */ + len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len; + + val = ((QUP_TAG_REC | len) << QUP_MSW_SHIFT) | QUP_TAG_START | addr; + writel(val, qup->base + QUP_OUT_FIFO_BASE); +} + + +static void qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg) +{ + u32 opflags; + u32 val = 0; + int idx; + + for (idx = 0; qup->pos < msg->len; idx++) { + if ((idx & 1) == 0) { + /* Check that FIFO have data */ + opflags = readl(qup->base + QUP_OPERATIONAL); + if (!(opflags & QUP_IN_NOT_EMPTY)) + break; + + /* Reading 2 words at time */ + val = readl(qup->base + QUP_IN_FIFO_BASE); + + msg->buf[qup->pos++] = val & 0xFF; + } else { + msg->buf[qup->pos++] = val >> QUP_MSW_SHIFT; + } + } +} + +static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg) +{ + unsigned long left; + int ret; + + /* + * The QUP block will issue a NACK and STOP on the bus when reaching + * the end of the read, the length of the read is specified as one byte + * which limits the possible read to 256 (QUP_READ_LIMIT) bytes. + */ + if (msg->len > QUP_READ_LIMIT) { + dev_err(qup->dev, "HW not capable of reads over %d bytes\n", + QUP_READ_LIMIT); + return -EINVAL; + } + + qup->msg = msg; + qup->pos = 0; + + enable_irq(qup->irq); + + qup_i2c_set_read_mode(qup, msg->len); + + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + goto err; + + writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); + + ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); + if (ret) + goto err; + + qup_i2c_issue_read(qup, msg); + + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + goto err; + + do { + left = wait_for_completion_timeout(&qup->xfer, HZ); + if (!left) { + writel(1, qup->base + QUP_SW_RESET); + ret = -ETIMEDOUT; + goto err; + } + + if (qup->bus_err || qup->qup_err) { + if (qup->bus_err & QUP_I2C_NACK_FLAG) + dev_err(qup->dev, "NACK from %x\n", msg->addr); + ret = -EIO; + goto err; + } + + qup_i2c_read_fifo(qup, msg); + } while (qup->pos < msg->len); + +err: + disable_irq(qup->irq); + qup->msg = NULL; + + return ret; +} + +static int qup_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg msgs[], + int num) +{ + struct qup_i2c_dev *qup = i2c_get_adapdata(adap); + int ret, idx; + + ret = pm_runtime_get_sync(qup->dev); + if (ret) + goto out; + + writel(1, qup->base + QUP_SW_RESET); + ret = qup_i2c_poll_state(qup, QUP_RESET_STATE); + if (ret) + goto out; + + /* Configure QUP as I2C mini core */ + writel(I2C_MINI_CORE | I2C_N_VAL, qup->base + QUP_CONFIG); + + for (idx = 0; idx < num; idx++) { + if (msgs[idx].len == 0) { + ret = -EINVAL; + goto out; + } + + if (qup_i2c_poll_state_i2c_master(qup)) { + ret = -EIO; + goto out; + } + + if (msgs[idx].flags & I2C_M_RD) + ret = qup_i2c_read_one(qup, &msgs[idx]); + else + ret = qup_i2c_write_one(qup, &msgs[idx]); + + if (ret) + break; + + ret = qup_i2c_change_state(qup, QUP_RESET_STATE); + if (ret) + break; + } + + if (ret == 0) + ret = num; +out: + + pm_runtime_mark_last_busy(qup->dev); + pm_runtime_put_autosuspend(qup->dev); + + return ret; +} + +static u32 qup_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); +} + +static const struct i2c_algorithm qup_i2c_algo = { + .master_xfer = qup_i2c_xfer, + .functionality = qup_i2c_func, +}; + +static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup) +{ + clk_prepare_enable(qup->clk); + clk_prepare_enable(qup->pclk); +} + +static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup) +{ + u32 config; + + qup_i2c_change_state(qup, QUP_RESET_STATE); + clk_disable_unprepare(qup->clk); + config = readl(qup->base + QUP_CONFIG); + config |= QUP_CLOCK_AUTO_GATE; + writel(config, qup->base + QUP_CONFIG); + clk_disable_unprepare(qup->pclk); +} + +static int qup_i2c_probe(struct platform_device *pdev) +{ + static const int blk_sizes[] = {4, 16, 32}; + struct device_node *node = pdev->dev.of_node; + struct qup_i2c_dev *qup; + unsigned long one_bit_t; + struct resource *res; + u32 io_mode, hw_ver, size; + int ret, fs_div, hs_div; + int src_clk_freq; + int clk_freq = 100000; + + qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL); + if (!qup) + return -ENOMEM; + + qup->dev = &pdev->dev; + init_completion(&qup->xfer); + platform_set_drvdata(pdev, qup); + + of_property_read_u32(node, "clock-frequency", &clk_freq); + + /* We support frequencies up to FAST Mode (400KHz) */ + if (!clk_freq || clk_freq > 400000) { + dev_err(qup->dev, "clock frequency not supported %d\n", + clk_freq); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + qup->base = devm_ioremap_resource(qup->dev, res); + if (IS_ERR(qup->base)) + return PTR_ERR(qup->base); + + qup->irq = platform_get_irq(pdev, 0); + if (qup->irq < 0) { + dev_err(qup->dev, "No IRQ defined\n"); + return qup->irq; + } + + qup->clk = devm_clk_get(qup->dev, "core"); + if (IS_ERR(qup->clk)) { + dev_err(qup->dev, "Could not get core clock\n"); + return PTR_ERR(qup->clk); + } + + qup->pclk = devm_clk_get(qup->dev, "iface"); + if (IS_ERR(qup->pclk)) { + dev_err(qup->dev, "Could not get iface clock\n"); + return PTR_ERR(qup->pclk); + } + + qup_i2c_enable_clocks(qup); + + /* + * Bootloaders might leave a pending interrupt on certain QUP's, + * so we reset the core before registering for interrupts. + */ + writel(1, qup->base + QUP_SW_RESET); + ret = qup_i2c_poll_state_valid(qup); + if (ret) + goto fail; + + ret = devm_request_irq(qup->dev, qup->irq, qup_i2c_interrupt, + IRQF_TRIGGER_HIGH, "i2c_qup", qup); + if (ret) { + dev_err(qup->dev, "Request %d IRQ failed\n", qup->irq); + goto fail; + } + disable_irq(qup->irq); + + hw_ver = readl(qup->base + QUP_HW_VERSION); + dev_dbg(qup->dev, "Revision %x\n", hw_ver); + + io_mode = readl(qup->base + QUP_IO_MODE); + + /* + * The block/fifo size w.r.t. 'actual data' is 1/2 due to 'tag' + * associated with each byte written/received + */ + size = QUP_OUTPUT_BLOCK_SIZE(io_mode); + if (size > ARRAY_SIZE(blk_sizes)) + return -EIO; + qup->out_blk_sz = blk_sizes[size] / 2; + + size = QUP_INPUT_BLOCK_SIZE(io_mode); + if (size > ARRAY_SIZE(blk_sizes)) + return -EIO; + qup->in_blk_sz = blk_sizes[size] / 2; + + size = QUP_OUTPUT_FIFO_SIZE(io_mode); + qup->out_fifo_sz = qup->out_blk_sz * (2 << size); + + size = QUP_INPUT_FIFO_SIZE(io_mode); + qup->in_fifo_sz = qup->in_blk_sz * (2 << size); + + src_clk_freq = clk_get_rate(qup->clk); + fs_div = ((src_clk_freq / clk_freq) / 2) - 3; + hs_div = 3; + qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff); + + /* + * Time it takes for a byte to be clocked out on the bus. + * Each byte takes 9 clock cycles (8 bits + 1 ack). + */ + one_bit_t = (USEC_PER_SEC / clk_freq) + 1; + qup->one_byte_t = one_bit_t * 9; + + dev_dbg(qup->dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n", + qup->in_blk_sz, qup->in_fifo_sz, + qup->out_blk_sz, qup->out_fifo_sz); + + i2c_set_adapdata(&qup->adap, qup); + qup->adap.algo = &qup_i2c_algo; + qup->adap.dev.parent = qup->dev; + qup->adap.dev.of_node = pdev->dev.of_node; + strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name)); + + ret = i2c_add_adapter(&qup->adap); + if (ret) + goto fail; + + pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC); + pm_runtime_use_autosuspend(qup->dev); + pm_runtime_set_active(qup->dev); + pm_runtime_enable(qup->dev); + return 0; + +fail: + qup_i2c_disable_clocks(qup); + return ret; +} + +static int qup_i2c_remove(struct platform_device *pdev) +{ + struct qup_i2c_dev *qup = platform_get_drvdata(pdev); + + disable_irq(qup->irq); + qup_i2c_disable_clocks(qup); + i2c_del_adapter(&qup->adap); + pm_runtime_disable(qup->dev); + pm_runtime_set_suspended(qup->dev); + return 0; +} + +#ifdef CONFIG_PM +static int qup_i2c_pm_suspend_runtime(struct device *device) +{ + struct qup_i2c_dev *qup = dev_get_drvdata(device); + + dev_dbg(device, "pm_runtime: suspending...\n"); + qup_i2c_disable_clocks(qup); + return 0; +} + +static int qup_i2c_pm_resume_runtime(struct device *device) +{ + struct qup_i2c_dev *qup = dev_get_drvdata(device); + + dev_dbg(device, "pm_runtime: resuming...\n"); + qup_i2c_enable_clocks(qup); + return 0; +} +#endif + +#ifdef CONFIG_PM_SLEEP +static int qup_i2c_suspend(struct device *device) +{ + qup_i2c_pm_suspend_runtime(device); + return 0; +} + +static int qup_i2c_resume(struct device *device) +{ + qup_i2c_pm_resume_runtime(device); + pm_runtime_mark_last_busy(device); + pm_request_autosuspend(device); + return 0; +} +#endif + +static const struct dev_pm_ops qup_i2c_qup_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS( + qup_i2c_suspend, + qup_i2c_resume) + SET_RUNTIME_PM_OPS( + qup_i2c_pm_suspend_runtime, + qup_i2c_pm_resume_runtime, + NULL) +}; + +static const struct of_device_id qup_i2c_dt_match[] = { + { .compatible = "qcom,i2c-qup-v1.1.1" }, + { .compatible = "qcom,i2c-qup-v2.1.1" }, + { .compatible = "qcom,i2c-qup-v2.2.1" }, + {} +}; +MODULE_DEVICE_TABLE(of, qup_i2c_dt_match); + +static struct platform_driver qup_i2c_driver = { + .probe = qup_i2c_probe, + .remove = qup_i2c_remove, + .driver = { + .name = "i2c_qup", + .owner = THIS_MODULE, + .pm = &qup_i2c_qup_pm_ops, + .of_match_table = qup_i2c_dt_match, + }, +}; + +module_platform_driver(qup_i2c_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:i2c_qup");