--- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -31,7 +31,6 @@ struct m25p { struct spi_device *spi; struct spi_nor spi_nor; - struct mtd_info mtd; u8 command[MAX_CMD_SIZE]; }; @@ -62,8 +61,7 @@ static int m25p_cmdsz(struct spi_nor *no return 1 + nor->addr_width; } -static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len, - int wr_en) +static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) { struct m25p *flash = nor->priv; struct spi_device *spi = flash->spi; @@ -159,7 +157,7 @@ static int m25p80_erase(struct spi_nor * struct m25p *flash = nor->priv; dev_dbg(nor->dev, "%dKiB at 0x%08x\n", - flash->mtd.erasesize / 1024, (u32)offset); + flash->spi_nor.mtd.erasesize / 1024, (u32)offset); /* Set up command buffer. */ flash->command[0] = nor->erase_opcode; @@ -201,11 +199,10 @@ static int m25p_probe(struct spi_device nor->read_reg = m25p80_read_reg; nor->dev = &spi->dev; - nor->mtd = &flash->mtd; + nor->flash_node = spi->dev.of_node; nor->priv = flash; spi_set_drvdata(spi, flash); - flash->mtd.priv = nor; flash->spi = spi; if (spi->mode & SPI_RX_QUAD) @@ -214,7 +211,7 @@ static int m25p_probe(struct spi_device mode = SPI_NOR_DUAL; if (data && data->name) - flash->mtd.name = data->name; + nor->mtd.name = data->name; /* For some (historical?) reason many platforms provide two different * names in flash_platform_data: "name" and "type". Quite often name is @@ -223,8 +220,6 @@ static int m25p_probe(struct spi_device */ if (data && data->type) flash_name = data->type; - else if (!strcmp(spi->modalias, "spi-nor")) - flash_name = NULL; /* auto-detect */ else flash_name = spi->modalias; @@ -234,7 +229,7 @@ static int m25p_probe(struct spi_device ppdata.of_node = spi->dev.of_node; - return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, + return mtd_device_parse_register(&nor->mtd, NULL, &ppdata, data ? data->parts : NULL, data ? data->nr_parts : 0); } @@ -245,7 +240,7 @@ static int m25p_remove(struct spi_device struct m25p *flash = spi_get_drvdata(spi); /* Clean up MTD stuff. */ - return mtd_device_unregister(&flash->mtd); + return mtd_device_unregister(&flash->spi_nor.mtd); } /* @@ -261,59 +256,52 @@ static int m25p_remove(struct spi_device * keep them available as module aliases for existing platforms. */ static const struct spi_device_id m25p_ids[] = { - {"at25fs010"}, {"at25fs040"}, {"at25df041a"}, {"at25df321a"}, - {"at25df641"}, {"at26f004"}, {"at26df081a"}, {"at26df161a"}, - {"at26df321"}, {"at45db081d"}, - {"en25f32"}, {"en25p32"}, {"en25q32b"}, {"en25p64"}, - {"en25q64"}, {"en25qh128"}, {"en25qh256"}, - {"f25l32pa"}, - {"mr25h256"}, {"mr25h10"}, - {"gd25q32"}, {"gd25q64"}, - {"160s33b"}, {"320s33b"}, {"640s33b"}, - {"mx25l2005a"}, {"mx25l4005a"}, {"mx25l8005"}, {"mx25l1606e"}, - {"mx25l3205d"}, {"mx25l3255e"}, {"mx25l6405d"}, {"mx25l12805d"}, - {"mx25l12855e"},{"mx25l25635e"},{"mx25l25655e"},{"mx66l51235l"}, - {"mx66l1g55g"}, - {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q256a"}, - {"n25q512a"}, {"n25q512ax3"}, {"n25q00"}, - {"pm25lv512"}, {"pm25lv010"}, {"pm25lq032"}, - {"s25sl032p"}, {"s25sl064p"}, {"s25fl256s0"}, {"s25fl256s1"}, - {"s25fl512s"}, {"s70fl01gs"}, {"s25sl12800"}, {"s25sl12801"}, - {"s25fl129p0"}, {"s25fl129p1"}, {"s25sl004a"}, {"s25sl008a"}, - {"s25sl016a"}, {"s25sl032a"}, {"s25sl064a"}, {"s25fl008k"}, - {"s25fl016k"}, {"s25fl064k"}, {"s25fl132k"}, - {"sst25vf040b"},{"sst25vf080b"},{"sst25vf016b"},{"sst25vf032b"}, - {"sst25vf064c"},{"sst25wf512"}, {"sst25wf010"}, {"sst25wf020"}, - {"sst25wf040"}, - {"m25p05"}, {"m25p10"}, {"m25p20"}, {"m25p40"}, - {"m25p80"}, {"m25p16"}, {"m25p32"}, {"m25p64"}, - {"m25p128"}, {"n25q032"}, + /* + * Entries not used in DTs that should be safe to drop after replacing + * them with "nor-jedec" in platform data. + */ + {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"}, + + /* + * Entries that were used in DTs without "nor-jedec" fallback and should + * be kept for backward compatibility. + */ + {"at25df321a"}, {"at25df641"}, {"at26df081a"}, + {"mr25h256"}, + {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"}, + {"mx25l25635e"},{"mx66l51235l"}, + {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"}, + {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"}, + {"s25fl064k"}, + {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"}, + {"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"}, + {"m25p64"}, {"m25p128"}, + {"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"}, + {"w25q80bl"}, {"w25q128"}, {"w25q256"}, + + /* Flashes that can't be detected using JEDEC */ {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"}, {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"}, {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, - {"m45pe10"}, {"m45pe80"}, {"m45pe16"}, - {"m25pe20"}, {"m25pe80"}, {"m25pe16"}, - {"m25px16"}, {"m25px32"}, {"m25px32-s0"}, {"m25px32-s1"}, - {"m25px64"}, {"m25px80"}, - {"w25x10"}, {"w25x20"}, {"w25x40"}, {"w25x80"}, - {"w25x16"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"}, - {"w25x64"}, {"w25q64"}, {"w25q80"}, {"w25q80bl"}, - {"w25q128"}, {"w25q256"}, {"cat25c11"}, - {"cat25c03"}, {"cat25c09"}, {"cat25c17"}, {"cat25128"}, - /* - * Generic support for SPI NOR that can be identified by the JEDEC READ - * ID opcode (0x9F). Use this, if possible. - */ - {"spi-nor"}, { }, }; MODULE_DEVICE_TABLE(spi, m25p_ids); +static const struct of_device_id m25p_of_table[] = { + /* + * Generic compatibility for SPI NOR that can be identified by the + * JEDEC READ ID opcode (0x9F). Use this, if possible. + */ + { .compatible = "jedec,spi-nor" }, + {} +}; +MODULE_DEVICE_TABLE(of, m25p_of_table); + static struct spi_driver m25p80_driver = { .driver = { .name = "m25p80", - .owner = THIS_MODULE, + .of_match_table = m25p_of_table, }, .id_table = m25p_ids, .probe = m25p_probe, --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -16,19 +16,32 @@ #include #include #include +#include -#include #include #include #include #include /* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ + +/* + * For everything but full-chip erase; probably could be much smaller, but kept + * around for safety for now + */ +#define DEFAULT_READY_WAIT_JIFFIES (40UL * HZ) + +/* + * For full-chip erase, calibrated to a 2MB flash (M25P16); should be scaled up + * for larger flash + */ +#define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ) #define SPI_NOR_MAX_ID_LEN 6 struct flash_info { + char *name; + /* * This array stores the ID bytes. * The first three bytes are the JEDIC ID. @@ -59,7 +72,7 @@ struct flash_info { #define JEDEC_MFR(info) ((info)->id[0]) -static const struct spi_device_id *spi_nor_match_id(const char *name); +static const struct flash_info *spi_nor_match_id(const char *name); /* * Read the status register, returning its value in the location @@ -143,7 +156,7 @@ static inline int spi_nor_read_dummy_cyc static inline int write_sr(struct spi_nor *nor, u8 val) { nor->cmd_buf[0] = val; - return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0); + return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1); } /* @@ -152,7 +165,7 @@ static inline int write_sr(struct spi_no */ static inline int write_enable(struct spi_nor *nor) { - return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0); + return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0); } /* @@ -160,7 +173,7 @@ static inline int write_enable(struct sp */ static inline int write_disable(struct spi_nor *nor) { - return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0, 0); + return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0); } static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) @@ -169,7 +182,7 @@ static inline struct spi_nor *mtd_to_spi } /* Enable/disable 4-byte addressing mode. */ -static inline int set_4byte(struct spi_nor *nor, struct flash_info *info, +static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, int enable) { int status; @@ -177,16 +190,16 @@ static inline int set_4byte(struct spi_n u8 cmd; switch (JEDEC_MFR(info)) { - case CFI_MFR_ST: /* Micron, actually */ + case SNOR_MFR_MICRON: /* Some Micron need WREN command; all will accept it */ need_wren = true; - case CFI_MFR_MACRONIX: - case 0xEF /* winbond */: + case SNOR_MFR_MACRONIX: + case SNOR_MFR_WINBOND: if (need_wren) write_enable(nor); cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B; - status = nor->write_reg(nor, cmd, NULL, 0, 0); + status = nor->write_reg(nor, cmd, NULL, 0); if (need_wren) write_disable(nor); @@ -194,7 +207,7 @@ static inline int set_4byte(struct spi_n default: /* Spansion style */ nor->cmd_buf[0] = enable << 7; - return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0); + return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1); } } static inline int spi_nor_sr_ready(struct spi_nor *nor) @@ -231,12 +244,13 @@ static int spi_nor_ready(struct spi_nor * Service routine to read status register until ready, or timeout occurs. * Returns non-zero if error. */ -static int spi_nor_wait_till_ready(struct spi_nor *nor) +static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor, + unsigned long timeout_jiffies) { unsigned long deadline; int timeout = 0, ret; - deadline = jiffies + MAX_READY_WAIT_JIFFIES; + deadline = jiffies + timeout_jiffies; while (!timeout) { if (time_after_eq(jiffies, deadline)) @@ -256,6 +270,12 @@ static int spi_nor_wait_till_ready(struc return -ETIMEDOUT; } +static int spi_nor_wait_till_ready(struct spi_nor *nor) +{ + return spi_nor_wait_till_ready_with_timeout(nor, + DEFAULT_READY_WAIT_JIFFIES); +} + /* * Erase the whole flash memory * @@ -263,9 +283,9 @@ static int spi_nor_wait_till_ready(struc */ static int erase_chip(struct spi_nor *nor) { - dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10)); + dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10)); - return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0); + return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0); } static int spi_nor_lock_and_prep(struct spi_nor *nor, enum spi_nor_ops ops) @@ -319,6 +339,8 @@ static int spi_nor_erase(struct mtd_info /* whole-chip erase? */ if (len == mtd->size) { + unsigned long timeout; + write_enable(nor); if (erase_chip(nor)) { @@ -326,7 +348,16 @@ static int spi_nor_erase(struct mtd_info goto erase_err; } - ret = spi_nor_wait_till_ready(nor); + /* + * Scale the timeout linearly with the size of the flash, with + * a minimum calibrated to an old 2MB flash. We could try to + * pull these from CFI/SFDP, but these values should be good + * enough for now. + */ + timeout = max(CHIP_ERASE_2MB_READY_WAIT_JIFFIES, + CHIP_ERASE_2MB_READY_WAIT_JIFFIES * + (unsigned long)(mtd->size / SZ_2M)); + ret = spi_nor_wait_till_ready_with_timeout(nor, timeout); if (ret) goto erase_err; @@ -369,72 +400,171 @@ erase_err: return ret; } +static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs, + uint64_t *len) +{ + struct mtd_info *mtd = &nor->mtd; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + int shift = ffs(mask) - 1; + int pow; + + if (!(sr & mask)) { + /* No protection */ + *ofs = 0; + *len = 0; + } else { + pow = ((sr & mask) ^ mask) >> shift; + *len = mtd->size >> pow; + *ofs = mtd->size - *len; + } +} + +/* + * Return 1 if the entire region is locked, 0 otherwise + */ +static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len, + u8 sr) +{ + loff_t lock_offs; + uint64_t lock_len; + + stm_get_locked_range(nor, sr, &lock_offs, &lock_len); + + return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs); +} + +/* + * Lock a region of the flash. Compatible with ST Micro and similar flash. + * Supports only the block protection bits BP{0,1,2} in the status register + * (SR). Does not support these features found in newer SR bitfields: + * - TB: top/bottom protect - only handle TB=0 (top protect) + * - SEC: sector/block protect - only handle SEC=0 (block protect) + * - CMP: complement protect - only support CMP=0 (range is not complemented) + * + * Sample table portion for 8MB flash (Winbond w25q64fw): + * + * SEC | TB | BP2 | BP1 | BP0 | Prot Length | Protected Portion + * -------------------------------------------------------------------------- + * X | X | 0 | 0 | 0 | NONE | NONE + * 0 | 0 | 0 | 0 | 1 | 128 KB | Upper 1/64 + * 0 | 0 | 0 | 1 | 0 | 256 KB | Upper 1/32 + * 0 | 0 | 0 | 1 | 1 | 512 KB | Upper 1/16 + * 0 | 0 | 1 | 0 | 0 | 1 MB | Upper 1/8 + * 0 | 0 | 1 | 0 | 1 | 2 MB | Upper 1/4 + * 0 | 0 | 1 | 1 | 0 | 4 MB | Upper 1/2 + * X | X | 1 | 1 | 1 | 8 MB | ALL + * + * Returns negative on errors, 0 on success. + */ static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len) { - struct mtd_info *mtd = nor->mtd; - uint32_t offset = ofs; - uint8_t status_old, status_new; - int ret = 0; + struct mtd_info *mtd = &nor->mtd; + u8 status_old, status_new; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + u8 shift = ffs(mask) - 1, pow, val; status_old = read_sr(nor); - if (offset < mtd->size - (mtd->size / 2)) - status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0; - else if (offset < mtd->size - (mtd->size / 4)) - status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; - else if (offset < mtd->size - (mtd->size / 8)) - status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; - else if (offset < mtd->size - (mtd->size / 16)) - status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2; - else if (offset < mtd->size - (mtd->size / 32)) - status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; - else if (offset < mtd->size - (mtd->size / 64)) - status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1; - else - status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0; + /* SPI NOR always locks to the end */ + if (ofs + len != mtd->size) { + /* Does combined region extend to end? */ + if (!stm_is_locked_sr(nor, ofs + len, mtd->size - ofs - len, + status_old)) + return -EINVAL; + len = mtd->size - ofs; + } + + /* + * Need smallest pow such that: + * + * 1 / (2^pow) <= (len / size) + * + * so (assuming power-of-2 size) we do: + * + * pow = ceil(log2(size / len)) = log2(size) - floor(log2(len)) + */ + pow = ilog2(mtd->size) - ilog2(len); + val = mask - (pow << shift); + if (val & ~mask) + return -EINVAL; + /* Don't "lock" with no region! */ + if (!(val & mask)) + return -EINVAL; + + status_new = (status_old & ~mask) | val; /* Only modify protection if it will not unlock other areas */ - if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) > - (status_old & (SR_BP2 | SR_BP1 | SR_BP0))) { - write_enable(nor); - ret = write_sr(nor, status_new); - } + if ((status_new & mask) <= (status_old & mask)) + return -EINVAL; - return ret; + write_enable(nor); + return write_sr(nor, status_new); } +/* + * Unlock a region of the flash. See stm_lock() for more info + * + * Returns negative on errors, 0 on success. + */ static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len) { - struct mtd_info *mtd = nor->mtd; - uint32_t offset = ofs; + struct mtd_info *mtd = &nor->mtd; uint8_t status_old, status_new; - int ret = 0; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + u8 shift = ffs(mask) - 1, pow, val; status_old = read_sr(nor); - if (offset+len > mtd->size - (mtd->size / 64)) - status_new = status_old & ~(SR_BP2 | SR_BP1 | SR_BP0); - else if (offset+len > mtd->size - (mtd->size / 32)) - status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0; - else if (offset+len > mtd->size - (mtd->size / 16)) - status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1; - else if (offset+len > mtd->size - (mtd->size / 8)) - status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; - else if (offset+len > mtd->size - (mtd->size / 4)) - status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2; - else if (offset+len > mtd->size - (mtd->size / 2)) - status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; - else - status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; + /* Cannot unlock; would unlock larger region than requested */ + if (stm_is_locked_sr(nor, status_old, ofs - mtd->erasesize, + mtd->erasesize)) + return -EINVAL; - /* Only modify protection if it will not lock other areas */ - if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) < - (status_old & (SR_BP2 | SR_BP1 | SR_BP0))) { - write_enable(nor); - ret = write_sr(nor, status_new); + /* + * Need largest pow such that: + * + * 1 / (2^pow) >= (len / size) + * + * so (assuming power-of-2 size) we do: + * + * pow = floor(log2(size / len)) = log2(size) - ceil(log2(len)) + */ + pow = ilog2(mtd->size) - order_base_2(mtd->size - (ofs + len)); + if (ofs + len == mtd->size) { + val = 0; /* fully unlocked */ + } else { + val = mask - (pow << shift); + /* Some power-of-two sizes are not supported */ + if (val & ~mask) + return -EINVAL; } - return ret; + status_new = (status_old & ~mask) | val; + + /* Only modify protection if it will not lock other areas */ + if ((status_new & mask) >= (status_old & mask)) + return -EINVAL; + + write_enable(nor); + return write_sr(nor, status_new); +} + +/* + * Check if a region of the flash is (completely) locked. See stm_lock() for + * more info. + * + * Returns 1 if entire region is locked, 0 if any portion is unlocked, and + * negative on errors. + */ +static int stm_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len) +{ + int status; + + status = read_sr(nor); + if (status < 0) + return status; + + return stm_is_locked_sr(nor, ofs, len, status); } static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) @@ -467,9 +597,23 @@ static int spi_nor_unlock(struct mtd_inf return ret; } +static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + int ret; + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_UNLOCK); + if (ret) + return ret; + + ret = nor->flash_is_locked(nor, ofs, len); + + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK); + return ret; +} + /* Used when the "_ext_id" is two bytes at most */ #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ - ((kernel_ulong_t)&(struct flash_info) { \ .id = { \ ((_jedec_id) >> 16) & 0xff, \ ((_jedec_id) >> 8) & 0xff, \ @@ -481,11 +625,9 @@ static int spi_nor_unlock(struct mtd_inf .sector_size = (_sector_size), \ .n_sectors = (_n_sectors), \ .page_size = 256, \ - .flags = (_flags), \ - }) + .flags = (_flags), #define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ - ((kernel_ulong_t)&(struct flash_info) { \ .id = { \ ((_jedec_id) >> 16) & 0xff, \ ((_jedec_id) >> 8) & 0xff, \ @@ -498,23 +640,27 @@ static int spi_nor_unlock(struct mtd_inf .sector_size = (_sector_size), \ .n_sectors = (_n_sectors), \ .page_size = 256, \ - .flags = (_flags), \ - }) + .flags = (_flags), #define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \ - ((kernel_ulong_t)&(struct flash_info) { \ .sector_size = (_sector_size), \ .n_sectors = (_n_sectors), \ .page_size = (_page_size), \ .addr_width = (_addr_width), \ - .flags = (_flags), \ - }) + .flags = (_flags), /* NOTE: double check command sets and memory organization when you add * more nor chips. This current list focusses on newer chips, which * have been converging on command sets which including JEDEC ID. + * + * All newly added entries should describe *hardware* and should use SECT_4K + * (or SECT_4K_PMC) if hardware supports erasing 4 KiB sectors. For usage + * scenarios excluding small sectors there is config option that can be + * disabled: CONFIG_MTD_SPI_NOR_USE_4K_SECTORS. + * For historical (and compatibility) reasons (before we got above config) some + * old entries may be missing 4K flag. */ -static const struct spi_device_id spi_nor_ids[] = { +static const struct flash_info spi_nor_ids[] = { /* Atmel -- some are (confusingly) marketed as "DataFlash" */ { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) }, { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) }, @@ -538,7 +684,7 @@ static const struct spi_device_id spi_no { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) }, { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) }, - { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, 0) }, + { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) }, /* ESMT */ { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) }, @@ -560,7 +706,11 @@ static const struct spi_device_id spi_no { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) }, { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) }, + /* ISSI */ + { "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2, SECT_4K) }, + /* Macronix */ + { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) }, { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) }, { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) }, { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) }, @@ -578,7 +728,9 @@ static const struct spi_device_id spi_no /* Micron */ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, - { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SPI_NOR_QUAD_READ) }, + { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, + { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, + { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, @@ -595,25 +747,28 @@ static const struct spi_device_id spi_no * for the chips listed here (without boot sectors). */ { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, 0) }, + { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, - { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, - { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) }, - { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) }, + { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, + { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) }, { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) }, { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) }, { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) }, - { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, - { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) }, + { "s25fl004k", INFO(0xef4013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, - { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, 0) }, + { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) }, + { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) }, + { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ) }, /* SST -- large erase sizes are "overlays", "sectors" are 4K */ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, @@ -624,6 +779,8 @@ static const struct spi_device_id spi_no { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1, SECT_4K | SST_WRITE) }, { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) }, { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) }, + { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4, SECT_4K) }, + { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) }, { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, @@ -672,10 +829,11 @@ static const struct spi_device_id spi_no { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, - { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K) }, + { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, - { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, SECT_4K) }, + { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, @@ -690,11 +848,11 @@ static const struct spi_device_id spi_no { }, }; -static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor) +static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) { int tmp; u8 id[SPI_NOR_MAX_ID_LEN]; - struct flash_info *info; + const struct flash_info *info; tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); if (tmp < 0) { @@ -703,7 +861,7 @@ static const struct spi_device_id *spi_n } for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) { - info = (void *)spi_nor_ids[tmp].driver_data; + info = &spi_nor_ids[tmp]; if (info->id_len) { if (!memcmp(info->id, id, info->id_len)) return &spi_nor_ids[tmp]; @@ -857,8 +1015,7 @@ static int macronix_quad_enable(struct s val = read_sr(nor); write_enable(nor); - nor->cmd_buf[0] = val | SR_QUAD_EN_MX; - nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0); + write_sr(nor, val | SR_QUAD_EN_MX); if (spi_nor_wait_till_ready(nor)) return 1; @@ -883,7 +1040,7 @@ static int write_sr_cr(struct spi_nor *n nor->cmd_buf[0] = val & 0xff; nor->cmd_buf[1] = (val >> 8); - return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 2, 0); + return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 2); } static int spansion_quad_enable(struct spi_nor *nor) @@ -925,7 +1082,7 @@ static int micron_quad_enable(struct spi /* set EVCR, enable quad I/O */ nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON; - ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0); + ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1); if (ret < 0) { dev_err(nor->dev, "error while writing EVCR register\n"); return ret; @@ -949,19 +1106,19 @@ static int micron_quad_enable(struct spi return 0; } -static int set_quad_mode(struct spi_nor *nor, struct flash_info *info) +static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info) { int status; switch (JEDEC_MFR(info)) { - case CFI_MFR_MACRONIX: + case SNOR_MFR_MACRONIX: status = macronix_quad_enable(nor); if (status) { dev_err(nor->dev, "Macronix quad-read not enabled\n"); return -EINVAL; } return status; - case CFI_MFR_ST: + case SNOR_MFR_MICRON: status = micron_quad_enable(nor); if (status) { dev_err(nor->dev, "Micron quad-read not enabled\n"); @@ -991,11 +1148,10 @@ static int spi_nor_check(struct spi_nor int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) { - const struct spi_device_id *id = NULL; - struct flash_info *info; + const struct flash_info *info = NULL; struct device *dev = nor->dev; - struct mtd_info *mtd = nor->mtd; - struct device_node *np = dev->of_node; + struct mtd_info *mtd = &nor->mtd; + struct device_node *np = nor->flash_node; int ret; int i; @@ -1003,27 +1159,25 @@ int spi_nor_scan(struct spi_nor *nor, co if (ret) return ret; - /* Try to auto-detect if chip name wasn't specified */ - if (!name) - id = spi_nor_read_id(nor); - else - id = spi_nor_match_id(name); - if (IS_ERR_OR_NULL(id)) + if (name) + info = spi_nor_match_id(name); + /* Try to auto-detect if chip name wasn't specified or not found */ + if (!info) + info = spi_nor_read_id(nor); + if (IS_ERR_OR_NULL(info)) return -ENOENT; - info = (void *)id->driver_data; - /* * If caller has specified name of flash model that can normally be * detected using JEDEC, let's verify it. */ if (name && info->id_len) { - const struct spi_device_id *jid; + const struct flash_info *jinfo; - jid = spi_nor_read_id(nor); - if (IS_ERR(jid)) { - return PTR_ERR(jid); - } else if (jid != id) { + jinfo = spi_nor_read_id(nor); + if (IS_ERR(jinfo)) { + return PTR_ERR(jinfo); + } else if (jinfo != info) { /* * JEDEC knows better, so overwrite platform ID. We * can't trust partitions any longer, but we'll let @@ -1032,28 +1186,29 @@ int spi_nor_scan(struct spi_nor *nor, co * information, even if it's not 100% accurate. */ dev_warn(dev, "found %s, expected %s\n", - jid->name, id->name); - id = jid; - info = (void *)jid->driver_data; + jinfo->name, info->name); + info = jinfo; } } mutex_init(&nor->lock); /* - * Atmel, SST and Intel/Numonyx serial nor tend to power - * up with the software protection bits set + * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up + * with the software protection bits set */ - if (JEDEC_MFR(info) == CFI_MFR_ATMEL || - JEDEC_MFR(info) == CFI_MFR_INTEL || - JEDEC_MFR(info) == CFI_MFR_SST) { + if (JEDEC_MFR(info) == SNOR_MFR_ATMEL || + JEDEC_MFR(info) == SNOR_MFR_INTEL || + JEDEC_MFR(info) == SNOR_MFR_SST || + JEDEC_MFR(info) == SNOR_MFR_WINBOND) { write_enable(nor); write_sr(nor, 0); } if (!mtd->name) mtd->name = dev_name(dev); + mtd->priv = nor; mtd->type = MTD_NORFLASH; mtd->writesize = 1; mtd->flags = MTD_CAP_NORFLASH; @@ -1061,15 +1216,18 @@ int spi_nor_scan(struct spi_nor *nor, co mtd->_erase = spi_nor_erase; mtd->_read = spi_nor_read; - /* nor protection support for STmicro chips */ - if (JEDEC_MFR(info) == CFI_MFR_ST) { + /* NOR protection support for STmicro/Micron chips and similar */ + if (JEDEC_MFR(info) == SNOR_MFR_MICRON || + JEDEC_MFR(info) == SNOR_MFR_WINBOND) { nor->flash_lock = stm_lock; nor->flash_unlock = stm_unlock; + nor->flash_is_locked = stm_is_locked; } - if (nor->flash_lock && nor->flash_unlock) { + if (nor->flash_lock && nor->flash_unlock && nor->flash_is_locked) { mtd->_lock = spi_nor_lock; mtd->_unlock = spi_nor_unlock; + mtd->_is_locked = spi_nor_is_locked; } /* sst nor chips use AAI word program */ @@ -1156,7 +1314,7 @@ int spi_nor_scan(struct spi_nor *nor, co else if (mtd->size > 0x1000000) { /* enable 4-byte addressing if the device exceeds 16MiB */ nor->addr_width = 4; - if (JEDEC_MFR(info) == CFI_MFR_AMD) { + if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) { /* Dedicated 4-byte command set */ switch (nor->flash_read) { case SPI_NOR_QUAD: @@ -1184,7 +1342,7 @@ int spi_nor_scan(struct spi_nor *nor, co nor->read_dummy = spi_nor_read_dummy_cycles(nor); - dev_info(dev, "%s (%lld Kbytes)\n", id->name, + dev_info(dev, "%s (%lld Kbytes)\n", info->name, (long long)mtd->size >> 10); dev_dbg(dev, @@ -1207,11 +1365,11 @@ int spi_nor_scan(struct spi_nor *nor, co } EXPORT_SYMBOL_GPL(spi_nor_scan); -static const struct spi_device_id *spi_nor_match_id(const char *name) +static const struct flash_info *spi_nor_match_id(const char *name) { - const struct spi_device_id *id = spi_nor_ids; + const struct flash_info *id = spi_nor_ids; - while (id->name[0]) { + while (id->name) { if (!strcmp(name, id->name)) return id; id++; --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -10,6 +10,23 @@ #ifndef __LINUX_MTD_SPI_NOR_H #define __LINUX_MTD_SPI_NOR_H +#include +#include + +/* + * Manufacturer IDs + * + * The first byte returned from the flash after sending opcode SPINOR_OP_RDID. + * Sometimes these are the same as CFI IDs, but sometimes they aren't. + */ +#define SNOR_MFR_ATMEL CFI_MFR_ATMEL +#define SNOR_MFR_INTEL CFI_MFR_INTEL +#define SNOR_MFR_MICRON CFI_MFR_ST /* ST Micro <--> Micron */ +#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX +#define SNOR_MFR_SPANSION CFI_MFR_AMD +#define SNOR_MFR_SST CFI_MFR_SST +#define SNOR_MFR_WINBOND 0xef + /* * Note on opcode nomenclature: some opcodes have a format like * SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number @@ -61,24 +78,24 @@ #define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ /* Status Register bits. */ -#define SR_WIP 1 /* Write in progress */ -#define SR_WEL 2 /* Write enable latch */ +#define SR_WIP BIT(0) /* Write in progress */ +#define SR_WEL BIT(1) /* Write enable latch */ /* meaning of other SR_* bits may differ between vendors */ -#define SR_BP0 4 /* Block protect 0 */ -#define SR_BP1 8 /* Block protect 1 */ -#define SR_BP2 0x10 /* Block protect 2 */ -#define SR_SRWD 0x80 /* SR write protect */ +#define SR_BP0 BIT(2) /* Block protect 0 */ +#define SR_BP1 BIT(3) /* Block protect 1 */ +#define SR_BP2 BIT(4) /* Block protect 2 */ +#define SR_SRWD BIT(7) /* SR write protect */ -#define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */ +#define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */ /* Enhanced Volatile Configuration Register bits */ -#define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */ +#define EVCR_QUAD_EN_MICRON BIT(7) /* Micron Quad I/O */ /* Flag Status Register bits */ -#define FSR_READY 0x80 +#define FSR_READY BIT(7) /* Configuration Register bits. */ -#define CR_QUAD_EN_SPAN 0x2 /* Spansion Quad I/O */ +#define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */ enum read_mode { SPI_NOR_NORMAL = 0, @@ -87,33 +104,6 @@ enum read_mode { SPI_NOR_QUAD, }; -/** - * struct spi_nor_xfer_cfg - Structure for defining a Serial Flash transfer - * @wren: command for "Write Enable", or 0x00 for not required - * @cmd: command for operation - * @cmd_pins: number of pins to send @cmd (1, 2, 4) - * @addr: address for operation - * @addr_pins: number of pins to send @addr (1, 2, 4) - * @addr_width: number of address bytes - * (3,4, or 0 for address not required) - * @mode: mode data - * @mode_pins: number of pins to send @mode (1, 2, 4) - * @mode_cycles: number of mode cycles (0 for mode not required) - * @dummy_cycles: number of dummy cycles (0 for dummy not required) - */ -struct spi_nor_xfer_cfg { - u8 wren; - u8 cmd; - u8 cmd_pins; - u32 addr; - u8 addr_pins; - u8 addr_width; - u8 mode; - u8 mode_pins; - u8 mode_cycles; - u8 dummy_cycles; -}; - #define SPI_NOR_MAX_CMD_SIZE 8 enum spi_nor_ops { SPI_NOR_OPS_READ = 0, @@ -127,11 +117,14 @@ enum spi_nor_option_flags { SNOR_F_USE_FSR = BIT(0), }; +struct mtd_info; + /** * struct spi_nor - Structure for defining a the SPI NOR layer * @mtd: point to a mtd_info structure * @lock: the lock for the read/write/erase/lock/unlock operations * @dev: point to a spi device, or a spi nor controller device. + * @flash_node: point to a device node describing this flash instance. * @page_size: the page size of the SPI NOR * @addr_width: number of address bytes * @erase_opcode: the opcode for erasing a sector @@ -141,28 +134,28 @@ enum spi_nor_option_flags { * @flash_read: the mode of the read * @sst_write_second: used by the SST write operation * @flags: flag options for the current SPI-NOR (SNOR_F_*) - * @cfg: used by the read_xfer/write_xfer * @cmd_buf: used by the write_reg * @prepare: [OPTIONAL] do some preparations for the * read/write/erase/lock/unlock operations * @unprepare: [OPTIONAL] do some post work after the * read/write/erase/lock/unlock operations - * @read_xfer: [OPTIONAL] the read fundamental primitive - * @write_xfer: [OPTIONAL] the writefundamental primitive * @read_reg: [DRIVER-SPECIFIC] read out the register * @write_reg: [DRIVER-SPECIFIC] write data to the register * @read: [DRIVER-SPECIFIC] read data from the SPI NOR * @write: [DRIVER-SPECIFIC] write data to the SPI NOR * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR * at the offset @offs - * @lock: [FLASH-SPECIFIC] lock a region of the SPI NOR - * @unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR + * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR + * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR + * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is + * completely locked * @priv: the private data */ struct spi_nor { - struct mtd_info *mtd; + struct mtd_info mtd; struct mutex lock; struct device *dev; + struct device_node *flash_node; u32 page_size; u8 addr_width; u8 erase_opcode; @@ -172,18 +165,12 @@ struct spi_nor { enum read_mode flash_read; bool sst_write_second; u32 flags; - struct spi_nor_xfer_cfg cfg; u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE]; int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops); void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops); - int (*read_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg, - u8 *buf, size_t len); - int (*write_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg, - u8 *buf, size_t len); int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); - int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len, - int write_enable); + int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); int (*read)(struct spi_nor *nor, loff_t from, size_t len, size_t *retlen, u_char *read_buf); @@ -193,6 +180,7 @@ struct spi_nor { int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len); + int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len); void *priv; };