From d32795d2be55748552ddacd9b1e47efc61264a98 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Mon, 8 Feb 2016 12:53:44 +0000 Subject: [PATCH 146/170] FIXUP: Overlay README - Restore spaces deleted in error --- arch/arm/boot/dts/overlays/README | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -550,7 +550,7 @@ Info: Configures a single PWM channel Pins 12 and 13 might be better choices on an A+, B+ or Pi2. 2) The onboard analogue audio output uses both PWM channels. 3) So be careful mixing audio and PWM. - 4) Currently the clockmust have been enabled and configured + 4) Currently the clock must have been enabled and configured by other means. Load: dtoverlay=pwm,= Params: pin Output pin (default 18) - see table @@ -569,7 +569,7 @@ Info: Configures both PWM channels Pins 12 and 13 might be better choices on an A+, B+ or Pi2. 2) The onboard analogue audio output uses both PWM channels. 3) So be careful mixing audio and PWM. - 4) Currently the clockmust have been enabled and configured + 4) Currently the clock must have been enabled and configured by other means. Load: dtoverlay=pwm-2chan,= Params: pin Output pin (default 18) - see table @@ -753,7 +753,7 @@ Params: Name: vga666 Info: Overlay for the Fen Logic VGA666 board - This uses GPIOs 2-21 (sono I2C), and activates the output 2-3 seconds + This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds after the kernel has started. Load: dtoverlay=vga666 Params: