From a4b5aa412585674d4a4f2ba7c0d818fd796f51c3 Mon Sep 17 00:00:00 2001 From: mwilliams03 Date: Sun, 18 Oct 2015 17:07:24 -0700 Subject: [PATCH 108/170] New overlay for PiScreen2r --- arch/arm/boot/dts/overlays/Makefile | 1 + arch/arm/boot/dts/overlays/README | 14 +++ arch/arm/boot/dts/overlays/piscreen2r-overlay.dts | 100 ++++++++++++++++++++++ 3 files changed, 115 insertions(+) create mode 100644 arch/arm/boot/dts/overlays/piscreen2r-overlay.dts --- a/arch/arm/boot/dts/overlays/Makefile +++ b/arch/arm/boot/dts/overlays/Makefile @@ -35,6 +35,7 @@ dtb-$(RPI_DT_OVERLAYS) += mcp2515-can1-o dtb-$(RPI_DT_OVERLAYS) += mmc-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += mz61581-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += piscreen-overlay.dtb +dtb-$(RPI_DT_OVERLAYS) += piscreen2r-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += pitft28-resistive-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += pps-gpio-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += pwm-overlay.dtb --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -425,6 +425,20 @@ Params: speed Display xohms Touchpanel sensitivity (X-plate resistance) +Name: piscreen2r +Info: PiScreen 2 with resistive TP display by OzzMaker.com +Load: dtoverlay=piscreen2r,= +Params: speed Display SPI bus speed + + rotate Display rotation {0,90,180,270} + + fps Delay between frame updates + + debug Debug output level {0-7} + + xohms Touchpanel sensitivity (X-plate resistance) + + Name: pitft28-resistive Info: Adafruit PiTFT 2.8" resistive touch screen Load: dtoverlay=pitft28-resistive,= --- /dev/null +++ b/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts @@ -0,0 +1,100 @@ + /* + * Device Tree overlay for PiScreen2 3.5" TFT with resistive touch by Ozzmaker.com + * + */ + +/dts-v1/; +/plugin/; + +/ { + compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; + + fragment@0 { + target = <&spi0>; + __overlay__ { + status = "okay"; + + spidev@0{ + status = "disabled"; + }; + + spidev@1{ + status = "disabled"; + }; + }; + }; + + fragment@1 { + target = <&gpio>; + __overlay__ { + piscreen2_pins: piscreen2_pins { + brcm,pins = <17 25 24 22>; + brcm,function = <0 1 1 1>; /* in out out out */ + }; + }; + }; + + fragment@2 { + target = <&spi0>; + __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + + piscreen2: piscreen2@0{ + compatible = "ilitek,ili9486"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&piscreen2_pins>; + bgr; + spi-max-frequency = <64000000>; + rotate = <90>; + fps = <30>; + buswidth = <8>; + regwidth = <16>; + txbuflen = <32768>; + reset-gpios = <&gpio 25 0>; + dc-gpios = <&gpio 24 0>; + led-gpios = <&gpio 22 1>; + debug = <0>; + + init = <0x10000b0 0x00 + 0x1000011 + 0x20000ff + 0x100003a 0x55 + 0x1000036 0x28 + 0x10000c0 0x11 0x09 + 0x10000c1 0x41 + 0x10000c5 0x00 0x00 0x00 0x00 + 0x10000b6 0x00 0x02 + 0x10000f7 0xa9 0x51 0x2c 0x2 + 0x10000be 0x00 0x04 + 0x10000e9 0x00 + 0x1000011 + 0x1000029>; + + }; + + piscreen2_ts: piscreen2-ts@1 { + compatible = "ti,ads7846"; + reg = <1>; + + spi-max-frequency = <2000000>; + interrupts = <17 2>; /* high-to-low edge triggered */ + interrupt-parent = <&gpio>; + pendown-gpio = <&gpio 17 0>; + ti,swap-xy; + ti,x-plate-ohms = /bits/ 16 <100>; + ti,pressure-max = /bits/ 16 <255>; + }; + }; + }; + __overrides__ { + speed = <&piscreen2>,"spi-max-frequency:0"; + rotate = <&piscreen2>,"rotate:0"; + fps = <&piscreen2>,"fps:0"; + debug = <&piscreen2>,"debug:0"; + xohms = <&piscreen2_ts>,"ti,x-plate-ohms;0"; + }; +}; +