From 5b950415b879051b4392eb416268ac363980efad Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Sun, 27 May 2012 13:22:29 +0000 Subject: bcm63xx: add preliminary support for bcm6328 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/brcm63xx/config-3.3 | 6 +- .../200-MIPS-expose-PCIe-drivers-for-MIPS.patch | 21 + ...X-use-the-Chip-ID-register-for-identifyin.patch | 47 ++ ...-BCM63XX-add-MISC-register-set-definition.patch | 107 +++++ ...IPS-BCM63XX-add-basic-BCM6328-CPU-support.patch | 472 +++++++++++++++++++++ ...63XX-add-flash-type-detection-for-BCM6328.patch | 25 ++ ...MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch | 22 + ...X-Move-the-PCI-initialization-into-its-ow.patch | 48 +++ ...BCM63XX-Add-PCIe-register-set-definitions.patch | 176 ++++++++ ...MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch | 240 +++++++++++ .../401-MIPS-BCM63XX-register-ohci-device.patch | 4 +- .../403-MIPS-BCM63XX-register-ehci-device.patch | 4 +- .../408-6358-enet1-external-mii-clk.patch | 4 +- ...4-bcm63xx_enet-split-dma-registers-access.patch | 2 +- ...t-add-support-for-bcm6368-internal-ethern.patch | 4 +- .../416-bcm63xx_enet-fix-lockup-on-BCM6328.patch | 94 ++++ ...3XX-add-support-for-BCM6328-in-bcm_enetsw.patch | 92 ++++ .../linux/brcm63xx/patches-3.3/501-board-NB4.patch | 2 +- .../brcm63xx/patches-3.3/511-board_V2500V.patch | 8 +- ...0-bcm63xx-add-support-for-96368MVWG-board.patch | 2 +- .../brcm63xx/patches-3.3/800-wl_exports.patch | 2 +- 21 files changed, 1364 insertions(+), 18 deletions(-) create mode 100644 target/linux/brcm63xx/patches-3.3/200-MIPS-expose-PCIe-drivers-for-MIPS.patch create mode 100644 target/linux/brcm63xx/patches-3.3/310-MIPS-BCM63XX-use-the-Chip-ID-register-for-identifyin.patch create mode 100644 target/linux/brcm63xx/patches-3.3/311-MIPS-BCM63XX-add-MISC-register-set-definition.patch create mode 100644 target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6328-CPU-support.patch create mode 100644 target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-add-flash-type-detection-for-BCM6328.patch create mode 100644 target/linux/brcm63xx/patches-3.3/314-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch create mode 100644 target/linux/brcm63xx/patches-3.3/315-MIPS-BCM63XX-Move-the-PCI-initialization-into-its-ow.patch create mode 100644 target/linux/brcm63xx/patches-3.3/316-MIPS-BCM63XX-Add-PCIe-register-set-definitions.patch create mode 100644 target/linux/brcm63xx/patches-3.3/317-MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch create mode 100644 target/linux/brcm63xx/patches-3.3/416-bcm63xx_enet-fix-lockup-on-BCM6328.patch create mode 100644 target/linux/brcm63xx/patches-3.3/417-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch (limited to 'target') diff --git a/target/linux/brcm63xx/config-3.3 b/target/linux/brcm63xx/config-3.3 index 78ce3774c9..c3e224d213 100644 --- a/target/linux/brcm63xx/config-3.3 +++ b/target/linux/brcm63xx/config-3.3 @@ -3,10 +3,10 @@ CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ATH79 is not set CONFIG_AUDIT=y CONFIG_AUDIT_GENERIC=y CONFIG_BCM63XX=y +# CONFIG_BCM63XX_CPU_6328 is not set CONFIG_BCM63XX_CPU_6338=y CONFIG_BCM63XX_CPU_6345=y CONFIG_BCM63XX_CPU_6348=y @@ -87,8 +87,8 @@ CONFIG_IP_PIMSM_V2=y CONFIG_IRQ_CPU=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_KEXEC=y -# CONFIG_LANTIQ is not set CONFIG_LEDS_GPIO=y +CONFIG_MDIO_BOARDINFO=y CONFIG_MIPS=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_MIPS_MACHINE is not set @@ -109,8 +109,10 @@ CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_PER_CPU_KM=y +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_PCI=y +# CONFIG_PCIEPORTBUS is not set CONFIG_PCI_DOMAINS=y CONFIG_PERF_USE_VMALLOC=y CONFIG_PHYLIB=y diff --git a/target/linux/brcm63xx/patches-3.3/200-MIPS-expose-PCIe-drivers-for-MIPS.patch b/target/linux/brcm63xx/patches-3.3/200-MIPS-expose-PCIe-drivers-for-MIPS.patch new file mode 100644 index 0000000000..9006f1a42e --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/200-MIPS-expose-PCIe-drivers-for-MIPS.patch @@ -0,0 +1,21 @@ +From a3f65b46e32acd29c613b35fab588e4d28e5d432 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Sun, 3 Jul 2011 13:11:19 +0200 +Subject: [PATCH 48/79] MIPS: expose PCIe drivers for MIPS + +Signed-off-by: Jonas Gorski +--- + arch/mips/Kconfig | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -2392,6 +2392,8 @@ config PCI_DOMAINS + + source "drivers/pci/Kconfig" + ++source "drivers/pci/pcie/Kconfig" ++ + # + # ISA support is now enabled via select. Too many systems still have the one + # or other ISA chip on the board that users don't know about so don't expect diff --git a/target/linux/brcm63xx/patches-3.3/310-MIPS-BCM63XX-use-the-Chip-ID-register-for-identifyin.patch b/target/linux/brcm63xx/patches-3.3/310-MIPS-BCM63XX-use-the-Chip-ID-register-for-identifyin.patch new file mode 100644 index 0000000000..30adbd1985 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/310-MIPS-BCM63XX-use-the-Chip-ID-register-for-identifyin.patch @@ -0,0 +1,47 @@ +From d831de57b1995eff51f43310b4bbfa85b1a3df42 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Fri, 30 Dec 2011 02:37:47 +0100 +Subject: [PATCH 38/79] MIPS: BCM63XX: use the Chip ID register for + identifying the SoC + +Newer BCM63XX SoCs use virtually the same cpu ID. But since they all have +the Chip ID register at the same location, we can use that to identify +the SoC we are running on. + +Signed-off-by: Jonas Gorski +--- + arch/mips/bcm63xx/cpu.c | 20 ++++++++++++-------- + 1 file changed, 12 insertions(+), 8 deletions(-) + +--- a/arch/mips/bcm63xx/cpu.c ++++ b/arch/mips/bcm63xx/cpu.c +@@ -228,17 +228,21 @@ void __init bcm63xx_cpu_init(void) + bcm63xx_irqs = bcm6345_irqs; + break; + case CPU_BMIPS4350: +- switch (read_c0_prid() & 0xf0) { +- case 0x10: ++ if ((read_c0_prid() & 0xf0) == 0x10) { + expected_cpu_id = BCM6358_CPU_ID; + bcm63xx_regs_base = bcm6358_regs_base; + bcm63xx_irqs = bcm6358_irqs; +- break; +- case 0x30: +- expected_cpu_id = BCM6368_CPU_ID; +- bcm63xx_regs_base = bcm6368_regs_base; +- bcm63xx_irqs = bcm6368_irqs; +- break; ++ } else { ++ /* all newer chips have the same chip id location */ ++ u16 chip_id = bcm_readw(BCM_6368_PERF_BASE); ++ ++ switch (chip_id) { ++ case BCM6368_CPU_ID: ++ expected_cpu_id = BCM6368_CPU_ID; ++ bcm63xx_regs_base = bcm6368_regs_base; ++ bcm63xx_irqs = bcm6368_irqs; ++ break; ++ } + } + break; + } diff --git a/target/linux/brcm63xx/patches-3.3/311-MIPS-BCM63XX-add-MISC-register-set-definition.patch b/target/linux/brcm63xx/patches-3.3/311-MIPS-BCM63XX-add-MISC-register-set-definition.patch new file mode 100644 index 0000000000..83ccf62b9c --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/311-MIPS-BCM63XX-add-MISC-register-set-definition.patch @@ -0,0 +1,107 @@ +From 48d3ed67982d2d1cecb5b33bf396d21f6fd7b088 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Tue, 14 Jun 2011 21:14:39 +0200 +Subject: [PATCH 39/79] MIPS: BCM63XX: add MISC register set definition + +Signed-off-by: Jonas Gorski +--- + arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 10 +++++++++- + arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 ++ + arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 10 ++++++++++ + 3 files changed, 21 insertions(+), 1 deletion(-) + +--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h ++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h +@@ -129,7 +129,8 @@ enum bcm63xx_regs_set { + RSET_PCMDMA, + RSET_PCMDMAC, + RSET_PCMDMAS, +- RSET_TRNG ++ RSET_TRNG, ++ RSET_MISC + }; + + #define RSET_DSL_LMEM_SIZE (64 * 1024 * 4) +@@ -198,6 +199,7 @@ enum bcm63xx_regs_set { + #define BCM_6338_PCMDMAC_BASE (0xdeadbeef) + #define BCM_6338_PCMDMAS_BASE (0xdeadbeef) + #define BCM_6338_TRNG_BASE (0xdeadbeef) ++#define BCM_6338_MISC_BASE (0xdeadbeef) + + /* + * 6345 register sets base address +@@ -242,6 +244,7 @@ enum bcm63xx_regs_set { + #define BCM_6345_PCMDMAC_BASE (0xdeadbeef) + #define BCM_6345_PCMDMAS_BASE (0xdeadbeef) + #define BCM_6345_TRNG_BASE (0xdeadbeef) ++#define BCM_6345_MISC_BASE (0xdeadbeef) + + /* + * 6348 register sets base address +@@ -283,6 +286,7 @@ enum bcm63xx_regs_set { + #define BCM_6348_PCMDMAC_BASE (0xdeadbeef) + #define BCM_6348_PCMDMAS_BASE (0xdeadbeef) + #define BCM_6348_TRNG_BASE (0xdeadbeef) ++#define BCM_6348_MISC_BASE (0xdeadbeef) + + /* + * 6358 register sets base address +@@ -324,6 +328,7 @@ enum bcm63xx_regs_set { + #define BCM_6358_PCMDMAC_BASE (0xfffe1900) + #define BCM_6358_PCMDMAS_BASE (0xfffe1a00) + #define BCM_6358_TRNG_BASE (0xdeadbeef) ++#define BCM_6358_MISC_BASE (0xdeadbeef) + + + /* +@@ -366,6 +371,7 @@ enum bcm63xx_regs_set { + #define BCM_6368_PCMDMAC_BASE (0xb0005a00) + #define BCM_6368_PCMDMAS_BASE (0xb0005c00) + #define BCM_6368_TRNG_BASE (0xb0004180) ++#define BCM_6368_MISC_BASE (0xdeadbeef) + + + extern const unsigned long *bcm63xx_regs_base; +@@ -412,6 +418,7 @@ extern const unsigned long *bcm63xx_regs + __GEN_RSET_BASE(__cpu, PCMDMAC) \ + __GEN_RSET_BASE(__cpu, PCMDMAS) \ + __GEN_RSET_BASE(__cpu, TRNG) \ ++ __GEN_RSET_BASE(__cpu, MISC) \ + } + + #define __GEN_CPU_REGS_TABLE(__cpu) \ +@@ -451,6 +458,7 @@ extern const unsigned long *bcm63xx_regs + [RSET_PCMDMAC] = BCM_## __cpu ##_PCMDMAC_BASE, \ + [RSET_PCMDMAS] = BCM_## __cpu ##_PCMDMAS_BASE, \ + [RSET_TRNG] = BCM_## __cpu ##_TRNG_BASE, \ ++ [RSET_MISC] = BCM_## __cpu ##_MISC_BASE, \ + + + static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) +--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h ++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h +@@ -91,5 +91,7 @@ + #define bcm_memc_writel(v, o) bcm_rset_writel(RSET_MEMC, (v), (o)) + #define bcm_ddr_readl(o) bcm_rset_readl(RSET_DDR, (o)) + #define bcm_ddr_writel(v, o) bcm_rset_writel(RSET_DDR, (v), (o)) ++#define bcm_misc_readl(o) bcm_rset_readl(RSET_MISC, (o)) ++#define bcm_misc_writel(v, o) bcm_rset_writel(RSET_MISC, (v), (o)) + + #endif /* ! BCM63XX_IO_H_ */ +--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h ++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +@@ -1116,4 +1116,14 @@ + #define TRNG_THRES 0x0c + #define TRNG_MASK 0x10 + ++/************************************************************************* ++ * _REG relative to RSET_MISC ++ *************************************************************************/ ++ ++#define MISC_STRAPBUS_6328_REG 0x240 ++#define STRAPBUS_6328_FCVO_SHIFT 7 ++#define STRAPBUS_6328_FCVO_MASK (0x1f << STRAPBUS_6328_FCVO_SHIFT) ++#define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28) ++#define STRAPBUS_6328_BOOT_SEL_NAND (0 << 28) ++ + #endif /* BCM63XX_REGS_H_ */ diff --git a/target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6328-CPU-support.patch b/target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6328-CPU-support.patch new file mode 100644 index 0000000000..362848b8df --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6328-CPU-support.patch @@ -0,0 +1,472 @@ +From e7fd2a00f5d6c5e50976ed931c26fdbfbbacf835 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Tue, 14 Jun 2011 21:14:39 +0200 +Subject: [PATCH 40/79] MIPS: BCM63XX: add basic BCM6328 CPU support + +Signed-off-by: Jonas Gorski +--- + arch/mips/bcm63xx/Kconfig | 4 + + arch/mips/bcm63xx/boards/board_bcm963xx.c | 11 ++- + arch/mips/bcm63xx/cpu.c | 43 +++++++++ + arch/mips/bcm63xx/dev-spi.c | 2 +- + arch/mips/bcm63xx/irq.c | 21 +++++ + arch/mips/bcm63xx/prom.c | 4 +- + arch/mips/bcm63xx/setup.c | 13 ++- + arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 101 +++++++++++++++++++++ + arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 2 + + arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 44 +++++++++ + arch/mips/include/asm/mach-bcm63xx/ioremap.h | 1 + + 11 files changed, 238 insertions(+), 8 deletions(-) + +--- a/arch/mips/bcm63xx/Kconfig ++++ b/arch/mips/bcm63xx/Kconfig +@@ -1,6 +1,10 @@ + menu "CPU support" + depends on BCM63XX + ++config BCM63XX_CPU_6328 ++ bool "support 6328 CPU" ++ select HW_HAS_PCI ++ + config BCM63XX_CPU_6338 + bool "support 6338 CPU" + select HW_HAS_PCI +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -760,9 +760,14 @@ void __init board_prom_init(void) + char cfe_version[32]; + u32 val; + +- /* read base address of boot chip select (0) */ +- val = bcm_mpi_readl(MPI_CSBASE_REG(0)); +- val &= MPI_CSBASE_BASE_MASK; ++ /* read base address of boot chip select (0) ++ * 6328 does not have MPI but boots from a fixed address */ ++ if (BCMCPU_IS_6328()) ++ val = 0x18000000; ++ else { ++ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); ++ val &= MPI_CSBASE_BASE_MASK; ++ } + boot_addr = (u8 *)KSEG1ADDR(val); + + /* dump cfe version */ +--- a/arch/mips/bcm63xx/cpu.c ++++ b/arch/mips/bcm63xx/cpu.c +@@ -29,6 +29,14 @@ static u16 bcm63xx_cpu_rev; + static unsigned int bcm63xx_cpu_freq; + static unsigned int bcm63xx_memory_size; + ++static const unsigned long bcm6328_regs_base[] = { ++ __GEN_CPU_REGS_TABLE(6328) ++}; ++ ++static const int bcm6328_irqs[] = { ++ __GEN_CPU_IRQ_TABLE(6328) ++}; ++ + static const unsigned long bcm6338_regs_base[] = { + __GEN_CPU_REGS_TABLE(6338) + }; +@@ -99,6 +107,33 @@ unsigned int bcm63xx_get_memory_size(voi + static unsigned int detect_cpu_clock(void) + { + switch (bcm63xx_get_cpu_id()) { ++ case BCM6328_CPU_ID: ++ { ++ unsigned int tmp, mips_pll_fcvo; ++ ++ tmp = bcm_misc_readl(MISC_STRAPBUS_6328_REG); ++ mips_pll_fcvo = (tmp & STRAPBUS_6328_FCVO_MASK) ++ >> STRAPBUS_6328_FCVO_SHIFT; ++ ++ switch (mips_pll_fcvo) { ++ case 0x12: ++ case 0x14: ++ case 0x19: ++ return 160000000; ++ case 0x1c: ++ return 192000000; ++ case 0x13: ++ case 0x15: ++ return 200000000; ++ case 0x1a: ++ return 384000000; ++ case 0x16: ++ return 400000000; ++ default: ++ return 320000000; ++ } ++ ++ } + case BCM6338_CPU_ID: + /* BCM6338 has a fixed 240 Mhz frequency */ + return 240000000; +@@ -170,6 +205,9 @@ static unsigned int detect_memory_size(v + unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; + u32 val; + ++ if (BCMCPU_IS_6328()) ++ return bcm_ddr_readl(DDR_CSEND_REG) << 24; ++ + if (BCMCPU_IS_6345()) { + val = bcm_sdram_readl(SDRAM_MBASE_REG); + return (val * 8 * 1024 * 1024); +@@ -237,6 +275,11 @@ void __init bcm63xx_cpu_init(void) + u16 chip_id = bcm_readw(BCM_6368_PERF_BASE); + + switch (chip_id) { ++ case BCM6328_CPU_ID: ++ expected_cpu_id = BCM6328_CPU_ID; ++ bcm63xx_regs_base = bcm6328_regs_base; ++ bcm63xx_irqs = bcm6328_irqs; ++ break; + case BCM6368_CPU_ID: + expected_cpu_id = BCM6368_CPU_ID; + bcm63xx_regs_base = bcm6368_regs_base; +--- a/arch/mips/bcm63xx/dev-spi.c ++++ b/arch/mips/bcm63xx/dev-spi.c +@@ -87,7 +87,7 @@ int __init bcm63xx_spi_register(void) + { + struct clk *periph_clk; + +- if (BCMCPU_IS_6345()) ++ if (BCMCPU_IS_6328() || BCMCPU_IS_6345()) + return -ENODEV; + + periph_clk = clk_get(NULL, "periph"); +--- a/arch/mips/bcm63xx/irq.c ++++ b/arch/mips/bcm63xx/irq.c +@@ -27,6 +27,17 @@ static void __internal_irq_unmask_32(uns + static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused; + + #ifndef BCMCPU_RUNTIME_DETECT ++#ifdef CONFIG_BCM63XX_CPU_6328 ++#define irq_stat_reg PERF_IRQSTAT_6328_REG ++#define irq_mask_reg PERF_IRQMASK_6328_REG ++#define irq_bits 64 ++#define is_ext_irq_cascaded 1 ++#define ext_irq_start (BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE) ++#define ext_irq_end (BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE) ++#define ext_irq_count 4 ++#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6328 ++#define ext_irq_cfg_reg2 0 ++#endif + #ifdef CONFIG_BCM63XX_CPU_6338 + #define irq_stat_reg PERF_IRQSTAT_6338_REG + #define irq_mask_reg PERF_IRQMASK_6338_REG +@@ -118,6 +129,16 @@ static void bcm63xx_init_irq(void) + irq_mask_addr = bcm63xx_regset_address(RSET_PERF); + + switch (bcm63xx_get_cpu_id()) { ++ case BCM6328_CPU_ID: ++ irq_stat_addr += PERF_IRQSTAT_6328_REG; ++ irq_mask_addr += PERF_IRQMASK_6328_REG; ++ irq_bits = 64; ++ ext_irq_count = 4; ++ is_ext_irq_cascaded = 1; ++ ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE; ++ ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE; ++ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328; ++ break; + case BCM6338_CPU_ID: + irq_stat_addr += PERF_IRQSTAT_6338_REG; + irq_mask_addr += PERF_IRQMASK_6338_REG; +--- a/arch/mips/bcm63xx/prom.c ++++ b/arch/mips/bcm63xx/prom.c +@@ -26,7 +26,9 @@ void __init prom_init(void) + bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG); + + /* disable all hardware blocks clock for now */ +- if (BCMCPU_IS_6338()) ++ if (BCMCPU_IS_6328()) ++ mask = CKCTL_6328_ALL_SAFE_EN; ++ else if (BCMCPU_IS_6338()) + mask = CKCTL_6338_ALL_SAFE_EN; + else if (BCMCPU_IS_6345()) + mask = CKCTL_6345_ALL_SAFE_EN; +--- a/arch/mips/bcm63xx/setup.c ++++ b/arch/mips/bcm63xx/setup.c +@@ -68,6 +68,9 @@ void bcm63xx_machine_reboot(void) + + /* mask and clear all external irq */ + switch (bcm63xx_get_cpu_id()) { ++ case BCM6328_CPU_ID: ++ perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328; ++ break; + case BCM6338_CPU_ID: + perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338; + break; +@@ -101,9 +104,13 @@ void bcm63xx_machine_reboot(void) + bcm6348_a1_reboot(); + + printk(KERN_INFO "triggering watchdog soft-reset...\n"); +- reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG); +- reg |= SYS_PLL_SOFT_RESET; +- bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG); ++ if (BCMCPU_IS_6328()) { ++ bcm_wdt_writel(1, WDT_SOFTRESET_REG); ++ } else { ++ reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG); ++ reg |= SYS_PLL_SOFT_RESET; ++ bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG); ++ } + while (1) + ; + } +--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h ++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h +@@ -9,6 +9,7 @@ + * compile time if only one CPU support is enabled (idea stolen from + * arm mach-types) + */ ++#define BCM6328_CPU_ID 0x6328 + #define BCM6338_CPU_ID 0x6338 + #define BCM6345_CPU_ID 0x6345 + #define BCM6348_CPU_ID 0x6348 +@@ -20,6 +21,19 @@ u16 __bcm63xx_get_cpu_id(void); + u16 bcm63xx_get_cpu_rev(void); + unsigned int bcm63xx_get_cpu_freq(void); + ++#ifdef CONFIG_BCM63XX_CPU_6328 ++# ifdef bcm63xx_get_cpu_id ++# undef bcm63xx_get_cpu_id ++# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() ++# define BCMCPU_RUNTIME_DETECT ++# else ++# define bcm63xx_get_cpu_id() BCM6328_CPU_ID ++# endif ++# define BCMCPU_IS_6328() (bcm63xx_get_cpu_id() == BCM6328_CPU_ID) ++#else ++# define BCMCPU_IS_6328() (0) ++#endif ++ + #ifdef CONFIG_BCM63XX_CPU_6338 + # ifdef bcm63xx_get_cpu_id + # undef bcm63xx_get_cpu_id +@@ -157,6 +171,49 @@ enum bcm63xx_regs_set { + #define RSET_TRNG_SIZE 20 + + /* ++ * 6328 register sets base address ++ */ ++#define BCM_6328_DSL_LMEM_BASE (0xdeadbeef) ++#define BCM_6328_PERF_BASE (0xb0000000) ++#define BCM_6328_TIMER_BASE (0xb0000040) ++#define BCM_6328_WDT_BASE (0xb000005c) ++#define BCM_6328_UART0_BASE (0xb0000100) ++#define BCM_6328_UART1_BASE (0xb0000120) ++#define BCM_6328_GPIO_BASE (0xb0000080) ++#define BCM_6328_SPI_BASE (0xdeadbeef) ++#define BCM_6328_UDC0_BASE (0xdeadbeef) ++#define BCM_6328_USBDMA_BASE (0xdeadbeef) ++#define BCM_6328_OHCI0_BASE (0xdeadbeef) ++#define BCM_6328_OHCI_PRIV_BASE (0xdeadbeef) ++#define BCM_6328_USBH_PRIV_BASE (0xdeadbeef) ++#define BCM_6328_MPI_BASE (0xdeadbeef) ++#define BCM_6328_PCMCIA_BASE (0xdeadbeef) ++#define BCM_6328_SDRAM_REGS_BASE (0xdeadbeef) ++#define BCM_6328_DSL_BASE (0xb0001900) ++#define BCM_6328_UBUS_BASE (0xdeadbeef) ++#define BCM_6328_ENET0_BASE (0xdeadbeef) ++#define BCM_6328_ENET1_BASE (0xdeadbeef) ++#define BCM_6328_ENETDMA_BASE (0xb000d800) ++#define BCM_6328_ENETDMAC_BASE (0xb000da00) ++#define BCM_6328_ENETDMAS_BASE (0xb000dc00) ++#define BCM_6328_ENETSW_BASE (0xb0e00000) ++#define BCM_6328_EHCI0_BASE (0x10002500) ++#define BCM_6328_SDRAM_BASE (0xdeadbeef) ++#define BCM_6328_MEMC_BASE (0xdeadbeef) ++#define BCM_6328_DDR_BASE (0xb0003000) ++#define BCM_6328_M2M_BASE (0xdeadbeef) ++#define BCM_6328_ATM_BASE (0xdeadbeef) ++#define BCM_6328_XTM_BASE (0xdeadbeef) ++#define BCM_6328_XTMDMA_BASE (0xb000b800) ++#define BCM_6328_XTMDMAC_BASE (0xdeadbeef) ++#define BCM_6328_XTMDMAS_BASE (0xdeadbeef) ++#define BCM_6328_PCM_BASE (0xb000a800) ++#define BCM_6328_PCMDMA_BASE (0xdeadbeef) ++#define BCM_6328_PCMDMAC_BASE (0xdeadbeef) ++#define BCM_6328_PCMDMAS_BASE (0xdeadbeef) ++#define BCM_6328_TRNG_BASE (0xdeadbeef) ++#define BCM_6328_MISC_BASE (0xb0001800) ++/* + * 6338 register sets base address + */ + #define BCM_6338_DSL_LMEM_BASE (0xfff00000) +@@ -466,6 +523,9 @@ static inline unsigned long bcm63xx_regs + #ifdef BCMCPU_RUNTIME_DETECT + return bcm63xx_regs_base[set]; + #else ++#ifdef CONFIG_BCM63XX_CPU_6328 ++ __GEN_RSET(6328) ++#endif + #ifdef CONFIG_BCM63XX_CPU_6338 + __GEN_RSET(6338) + #endif +@@ -520,6 +580,47 @@ enum bcm63xx_irq { + }; + + /* ++ * 6328 irqs ++ */ ++#define BCM_6328_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32) ++ ++#define BCM_6328_TIMER_IRQ (IRQ_INTERNAL_BASE + 31) ++#define BCM_6328_SPI_IRQ 0 ++#define BCM_6328_UART0_IRQ (IRQ_INTERNAL_BASE + 28) ++#define BCM_6328_UART1_IRQ (BCM_6328_HIGH_IRQ_BASE + 7) ++#define BCM_6328_DSL_IRQ (IRQ_INTERNAL_BASE + 4) ++#define BCM_6328_UDC0_IRQ 0 ++#define BCM_6328_ENET0_IRQ 0 ++#define BCM_6328_ENET1_IRQ 0 ++#define BCM_6328_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12) ++#define BCM_6328_OHCI0_IRQ (IRQ_INTERNAL_BASE + 9) ++#define BCM_6328_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10) ++#define BCM_6328_PCMCIA_IRQ 0 ++#define BCM_6328_ENET0_RXDMA_IRQ 0 ++#define BCM_6328_ENET0_TXDMA_IRQ 0 ++#define BCM_6328_ENET1_RXDMA_IRQ 0 ++#define BCM_6328_ENET1_TXDMA_IRQ 0 ++#define BCM_6328_PCI_IRQ (IRQ_INTERNAL_BASE + 23) ++#define BCM_6328_ATM_IRQ 0 ++#define BCM_6328_ENETSW_RXDMA0_IRQ (BCM_6328_HIGH_IRQ_BASE + 0) ++#define BCM_6328_ENETSW_RXDMA1_IRQ (BCM_6328_HIGH_IRQ_BASE + 1) ++#define BCM_6328_ENETSW_RXDMA2_IRQ (BCM_6328_HIGH_IRQ_BASE + 2) ++#define BCM_6328_ENETSW_RXDMA3_IRQ (BCM_6328_HIGH_IRQ_BASE + 3) ++#define BCM_6328_ENETSW_TXDMA0_IRQ (BCM_6328_HIGH_IRQ_BASE + 4) ++#define BCM_6328_ENETSW_TXDMA1_IRQ (BCM_6328_HIGH_IRQ_BASE + 5) ++#define BCM_6328_ENETSW_TXDMA2_IRQ (BCM_6328_HIGH_IRQ_BASE + 6) ++#define BCM_6328_ENETSW_TXDMA3_IRQ (BCM_6328_HIGH_IRQ_BASE + 7) ++#define BCM_6328_XTM_IRQ (BCM_6328_HIGH_IRQ_BASE + 31) ++#define BCM_6328_XTM_DMA0_IRQ (BCM_6328_HIGH_IRQ_BASE + 11) ++ ++#define BCM_6328_PCM_DMA0_IRQ (IRQ_INTERNAL_BASE + 2) ++#define BCM_6328_PCM_DMA1_IRQ (IRQ_INTERNAL_BASE + 3) ++#define BCM_6328_EXT_IRQ0 (IRQ_INTERNAL_BASE + 24) ++#define BCM_6328_EXT_IRQ1 (IRQ_INTERNAL_BASE + 25) ++#define BCM_6328_EXT_IRQ2 (IRQ_INTERNAL_BASE + 26) ++#define BCM_6328_EXT_IRQ3 (IRQ_INTERNAL_BASE + 27) ++ ++/* + * 6338 irqs + */ + #define BCM_6338_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h ++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h +@@ -9,6 +9,8 @@ int __init bcm63xx_gpio_init(void); + static inline unsigned long bcm63xx_gpio_count(void) + { + switch (bcm63xx_get_cpu_id()) { ++ case BCM6328_CPU_ID: ++ return 32; + case BCM6358_CPU_ID: + return 40; + case BCM6338_CPU_ID: +--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h ++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +@@ -15,6 +15,30 @@ + /* Clock Control register */ + #define PERF_CKCTL_REG 0x4 + ++#define CKCTL_6328_PHYMIPS_EN (1 << 0) ++#define CKCTL_6328_ADSL_QPROC_EN (1 << 1) ++#define CKCTL_6328_ADSL_AFE_EN (1 << 2) ++#define CKCTL_6328_ADSL_EN (1 << 3) ++#define CKCTL_6328_MIPS_EN (1 << 4) ++#define CKCTL_6328_SAR_EN (1 << 5) ++#define CKCTL_6328_PCM_EN (1 << 6) ++#define CKCTL_6328_USBD_EN (1 << 7) ++#define CKCTL_6328_USBH_EN (1 << 8) ++#define CKCTL_6328_HSSPI_EN (1 << 9) ++#define CKCTL_6328_PCIE_EN (1 << 10) ++#define CKCTL_6328_ROBOSW_EN (1 << 11) ++ ++#define CKCTL_6328_ALL_SAFE_EN (CKCTL_6328_PHYMIPS_EN | \ ++ CKCTL_6328_ADSL_QPROC_EN | \ ++ CKCTL_6328_ADSL_AFE_EN | \ ++ CKCTL_6328_ADSL_EN | \ ++ CKCTL_6328_SAR_EN | \ ++ CKCTL_6328_PCM_EN | \ ++ CKCTL_6328_USBD_EN | \ ++ CKCTL_6328_USBH_EN | \ ++ CKCTL_6328_ROBOSW_EN | \ ++ CKCTL_6328_PCIE_EN) ++ + #define CKCTL_6338_ADSLPHY_EN (1 << 0) + #define CKCTL_6338_MPI_EN (1 << 1) + #define CKCTL_6338_DRAM_EN (1 << 2) +@@ -119,6 +143,7 @@ + #define SYS_PLL_SOFT_RESET 0x1 + + /* Interrupt Mask register */ ++#define PERF_IRQMASK_6328_REG 0x20 + #define PERF_IRQMASK_6338_REG 0xc + #define PERF_IRQMASK_6345_REG 0xc + #define PERF_IRQMASK_6348_REG 0xc +@@ -126,6 +151,7 @@ + #define PERF_IRQMASK_6368_REG 0x20 + + /* Interrupt Status register */ ++#define PERF_IRQSTAT_6328_REG 0x28 + #define PERF_IRQSTAT_6338_REG 0x10 + #define PERF_IRQSTAT_6345_REG 0x10 + #define PERF_IRQSTAT_6348_REG 0x10 +@@ -133,6 +159,7 @@ + #define PERF_IRQSTAT_6368_REG 0x28 + + /* External Interrupt Configuration register */ ++#define PERF_EXTIRQ_CFG_REG_6328 0x18 + #define PERF_EXTIRQ_CFG_REG_6338 0x14 + #define PERF_EXTIRQ_CFG_REG_6345 0x14 + #define PERF_EXTIRQ_CFG_REG_6348 0x14 +@@ -163,8 +190,21 @@ + + /* Soft Reset register */ + #define PERF_SOFTRESET_REG 0x28 ++#define PERF_SOFTRESET_6328_REG 0x10 + #define PERF_SOFTRESET_6368_REG 0x10 + ++#define SOFTRESET_6328_SPI_MASK (1 << 0) ++#define SOFTRESET_6328_EPHY_MASK (1 << 1) ++#define SOFTRESET_6328_SAR_MASK (1 << 2) ++#define SOFTRESET_6328_ENETSW_MASK (1 << 3) ++#define SOFTRESET_6328_USBS_MASK (1 << 4) ++#define SOFTRESET_6328_USBH_MASK (1 << 5) ++#define SOFTRESET_6328_PCM_MASK (1 << 6) ++#define SOFTRESET_6328_PCIE_CORE_MASK (1 << 7) ++#define SOFTRESET_6328_PCIE_MASK (1 << 8) ++#define SOFTRESET_6328_PCIE_EXT_MASK (1 << 9) ++#define SOFTRESET_6328_PCIE_HARD_MASK (1 << 10) ++ + #define SOFTRESET_6338_SPI_MASK (1 << 0) + #define SOFTRESET_6338_ENET_MASK (1 << 2) + #define SOFTRESET_6338_USBH_MASK (1 << 3) +@@ -308,6 +348,8 @@ + /* Watchdog reset length register */ + #define WDT_RSTLEN_REG 0x8 + ++/* Watchdog soft reset register (BCM6328 only) */ ++#define WDT_SOFTRESET_REG 0xc + + /************************************************************************* + * _REG relative to RSET_UARTx +@@ -934,6 +976,8 @@ + * _REG relative to RSET_DDR + *************************************************************************/ + ++#define DDR_CSEND_REG 0x8 ++ + #define DDR_DMIPSPLLCFG_REG 0x18 + #define DMIPSPLLCFG_M1_SHIFT 0 + #define DMIPSPLLCFG_M1_MASK (0xff << DMIPSPLLCFG_M1_SHIFT) +--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h ++++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h +@@ -18,6 +18,7 @@ static inline int is_bcm63xx_internal_re + if (offset >= 0xfff00000) + return 1; + break; ++ case BCM6328_CPU_ID: + case BCM6368_CPU_ID: + if (offset >= 0xb0000000 && offset < 0xb1000000) + return 1; diff --git a/target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-add-flash-type-detection-for-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-add-flash-type-detection-for-BCM6328.patch new file mode 100644 index 0000000000..ca6d4d4dc5 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-add-flash-type-detection-for-BCM6328.patch @@ -0,0 +1,25 @@ +From dc087ed1d9d4ae326a47e4a1eef3a079acf4a1f5 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Tue, 14 Jun 2011 21:14:39 +0200 +Subject: [PATCH 41/79] MIPS: BCM63XX: add flash type detection for BCM6328 + +Signed-off-by: Jonas Gorski +--- + arch/mips/bcm63xx/dev-flash.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/arch/mips/bcm63xx/dev-flash.c ++++ b/arch/mips/bcm63xx/dev-flash.c +@@ -59,6 +59,12 @@ static int __init bcm63xx_detect_flash_t + u32 val; + + switch (bcm63xx_get_cpu_id()) { ++ case BCM6328_CPU_ID: ++ val = bcm_misc_readl(MISC_STRAPBUS_6328_REG); ++ if (val & STRAPBUS_6328_BOOT_SEL_SERIAL) ++ return BCM63XX_FLASH_TYPE_SERIAL; ++ else ++ return BCM63XX_FLASH_TYPE_NAND; + case BCM6338_CPU_ID: + case BCM6345_CPU_ID: + case BCM6348_CPU_ID: diff --git a/target/linux/brcm63xx/patches-3.3/314-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/314-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch new file mode 100644 index 0000000000..1418d65bf4 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/314-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch @@ -0,0 +1,22 @@ +From c110865541e2d3782c412af9d48c016de5a64d9c Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Tue, 14 Jun 2011 21:14:39 +0200 +Subject: [PATCH 42/79] MIPS: BCM63XX: allow second UART on BCM6328 + +Signed-off-by: Jonas Gorski +--- + arch/mips/bcm63xx/dev-uart.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/arch/mips/bcm63xx/dev-uart.c ++++ b/arch/mips/bcm63xx/dev-uart.c +@@ -54,7 +54,8 @@ int __init bcm63xx_uart_register(unsigne + if (id >= ARRAY_SIZE(bcm63xx_uart_devices)) + return -ENODEV; + +- if (id == 1 && (!BCMCPU_IS_6358() && !BCMCPU_IS_6368())) ++ if (id == 1 && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() && ++ !BCMCPU_IS_6368()) + return -ENODEV; + + if (id == 0) { diff --git a/target/linux/brcm63xx/patches-3.3/315-MIPS-BCM63XX-Move-the-PCI-initialization-into-its-ow.patch b/target/linux/brcm63xx/patches-3.3/315-MIPS-BCM63XX-Move-the-PCI-initialization-into-its-ow.patch new file mode 100644 index 0000000000..fe343e0e10 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/315-MIPS-BCM63XX-Move-the-PCI-initialization-into-its-ow.patch @@ -0,0 +1,48 @@ +From f7d09679600b187fcfa1d70819e53f190fb1c231 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Sun, 3 Jul 2011 03:08:11 +0200 +Subject: [PATCH 45/79] MIPS: BCM63XX: Move the PCI initialization into its + own function + +Also make the cpu check a bit more explicit. + +Signed-off-by: Jonas Gorski +--- + arch/mips/pci/pci-bcm63xx.c | 25 +++++++++++++++++-------- + 1 file changed, 17 insertions(+), 8 deletions(-) + +--- a/arch/mips/pci/pci-bcm63xx.c ++++ b/arch/mips/pci/pci-bcm63xx.c +@@ -88,14 +88,10 @@ static void bcm63xx_int_cfg_writel(u32 v + + void __iomem *pci_iospace_start; + +-int __init bcm63xx_pci_register(void) ++static int __init bcm63xx_register_pci(void) + { + unsigned int mem_size; + u32 val; +- +- if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368()) +- return -ENODEV; +- + /* + * configuration access are done through IO space, remap 4 + * first bytes to access it from CPU. +@@ -211,3 +207,16 @@ int __init bcm63xx_pci_register(void) + "bcm63xx PCI IO space"); + return 0; + } ++ ++int __init bcm63xx_pci_register(void) ++{ ++ switch (bcm63xx_get_cpu_id()) { ++ case BCM6348_CPU_ID: ++ case BCM6358_CPU_ID: ++ case BCM6368_CPU_ID: ++ return bcm63xx_register_pci(); ++ default: ++ return -ENODEV; ++ } ++} ++ diff --git a/target/linux/brcm63xx/patches-3.3/316-MIPS-BCM63XX-Add-PCIe-register-set-definitions.patch b/target/linux/brcm63xx/patches-3.3/316-MIPS-BCM63XX-Add-PCIe-register-set-definitions.patch new file mode 100644 index 0000000000..cabb9bd04b --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/316-MIPS-BCM63XX-Add-PCIe-register-set-definitions.patch @@ -0,0 +1,176 @@ +From 9a16718a325c1969422eb9d9b644eb89ce06692c Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Sun, 3 Jul 2011 03:41:02 +0200 +Subject: [PATCH 46/79] MIPS: BCM63XX: Add PCIe register set definitions + +Signed-off-by: Jonas Gorski +--- + arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 9 ++++ + arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 6 +++ + arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 54 +++++++++++++++++++++ + 3 files changed, 69 insertions(+) + +--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h ++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h +@@ -122,6 +122,7 @@ enum bcm63xx_regs_set { + RSET_USBH_PRIV, + RSET_MPI, + RSET_PCMCIA, ++ RSET_PCIE, + RSET_DSL, + RSET_ENET0, + RSET_ENET1, +@@ -188,6 +189,7 @@ enum bcm63xx_regs_set { + #define BCM_6328_USBH_PRIV_BASE (0xdeadbeef) + #define BCM_6328_MPI_BASE (0xdeadbeef) + #define BCM_6328_PCMCIA_BASE (0xdeadbeef) ++#define BCM_6328_PCIE_BASE (0xb0e40000) + #define BCM_6328_SDRAM_REGS_BASE (0xdeadbeef) + #define BCM_6328_DSL_BASE (0xb0001900) + #define BCM_6328_UBUS_BASE (0xdeadbeef) +@@ -232,6 +234,7 @@ enum bcm63xx_regs_set { + #define BCM_6338_USBH_PRIV_BASE (0xdeadbeef) + #define BCM_6338_MPI_BASE (0xfffe3160) + #define BCM_6338_PCMCIA_BASE (0xdeadbeef) ++#define BCM_6338_PCIE_BASE (0xdeadbeef) + #define BCM_6338_SDRAM_REGS_BASE (0xfffe3100) + #define BCM_6338_DSL_BASE (0xfffe1000) + #define BCM_6338_UBUS_BASE (0xdeadbeef) +@@ -279,6 +282,7 @@ enum bcm63xx_regs_set { + #define BCM_6345_ENETSW_BASE (0xdeadbeef) + #define BCM_6345_PCMCIA_BASE (0xfffe2028) + #define BCM_6345_MPI_BASE (0xfffe2000) ++#define BCM_6345_PCIE_BASE (0xdeadbeef) + #define BCM_6345_OHCI0_BASE (0xfffe2100) + #define BCM_6345_OHCI_PRIV_BASE (0xfffe2200) + #define BCM_6345_USBH_PRIV_BASE (0xdeadbeef) +@@ -320,6 +324,7 @@ enum bcm63xx_regs_set { + #define BCM_6348_USBH_PRIV_BASE (0xdeadbeef) + #define BCM_6348_MPI_BASE (0xfffe2000) + #define BCM_6348_PCMCIA_BASE (0xfffe2054) ++#define BCM_6348_PCIE_BASE (0xdeadbeef) + #define BCM_6348_SDRAM_REGS_BASE (0xfffe2300) + #define BCM_6348_M2M_BASE (0xfffe2800) + #define BCM_6348_DSL_BASE (0xfffe3000) +@@ -362,6 +367,7 @@ enum bcm63xx_regs_set { + #define BCM_6358_USBH_PRIV_BASE (0xfffe1500) + #define BCM_6358_MPI_BASE (0xfffe1000) + #define BCM_6358_PCMCIA_BASE (0xfffe1054) ++#define BCM_6358_PCIE_BASE (0xdeadbeef) + #define BCM_6358_SDRAM_REGS_BASE (0xfffe2300) + #define BCM_6358_M2M_BASE (0xdeadbeef) + #define BCM_6358_DSL_BASE (0xfffe3000) +@@ -405,6 +411,7 @@ enum bcm63xx_regs_set { + #define BCM_6368_USBH_PRIV_BASE (0xb0001700) + #define BCM_6368_MPI_BASE (0xb0001000) + #define BCM_6368_PCMCIA_BASE (0xb0001054) ++#define BCM_6368_PCIE_BASE (0xdeadbeef) + #define BCM_6368_SDRAM_REGS_BASE (0xdeadbeef) + #define BCM_6368_M2M_BASE (0xdeadbeef) + #define BCM_6368_DSL_BASE (0xdeadbeef) +@@ -453,6 +460,7 @@ extern const unsigned long *bcm63xx_regs + __GEN_RSET_BASE(__cpu, USBH_PRIV) \ + __GEN_RSET_BASE(__cpu, MPI) \ + __GEN_RSET_BASE(__cpu, PCMCIA) \ ++ __GEN_RSET_BASE(__cpu, PCIE) \ + __GEN_RSET_BASE(__cpu, DSL) \ + __GEN_RSET_BASE(__cpu, ENET0) \ + __GEN_RSET_BASE(__cpu, ENET1) \ +@@ -493,6 +501,7 @@ extern const unsigned long *bcm63xx_regs + [RSET_USBH_PRIV] = BCM_## __cpu ##_USBH_PRIV_BASE, \ + [RSET_MPI] = BCM_## __cpu ##_MPI_BASE, \ + [RSET_PCMCIA] = BCM_## __cpu ##_PCMCIA_BASE, \ ++ [RSET_PCIE] = BCM_## __cpu ##_PCIE_BASE, \ + [RSET_DSL] = BCM_## __cpu ##_DSL_BASE, \ + [RSET_ENET0] = BCM_## __cpu ##_ENET0_BASE, \ + [RSET_ENET1] = BCM_## __cpu ##_ENET1_BASE, \ +--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h ++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h +@@ -40,6 +40,10 @@ + #define BCM_CB_MEM_END_PA (BCM_CB_MEM_BASE_PA + \ + BCM_CB_MEM_SIZE - 1) + ++#define BCM_PCIE_MEM_BASE_PA 0x10f00000 ++#define BCM_PCIE_MEM_SIZE (16 * 1024 * 1024) ++#define BCM_PCIE_MEM_END_PA (BCM_PCIE_MEM_BASE_PA + \ ++ BCM_PCIE_MEM_SIZE - 1) + + /* + * Internal registers are accessed through KSEG3 +@@ -85,6 +89,8 @@ + #define bcm_mpi_writel(v, o) bcm_rset_writel(RSET_MPI, (v), (o)) + #define bcm_pcmcia_readl(o) bcm_rset_readl(RSET_PCMCIA, (o)) + #define bcm_pcmcia_writel(v, o) bcm_rset_writel(RSET_PCMCIA, (v), (o)) ++#define bcm_pcie_readl(o) bcm_rset_readl(RSET_PCIE, (o)) ++#define bcm_pcie_writel(v, o) bcm_rset_writel(RSET_PCIE, (v), (o)) + #define bcm_sdram_readl(o) bcm_rset_readl(RSET_SDRAM, (o)) + #define bcm_sdram_writel(v, o) bcm_rset_writel(RSET_SDRAM, (v), (o)) + #define bcm_memc_readl(o) bcm_rset_readl(RSET_MEMC, (o)) +--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h ++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +@@ -1163,6 +1163,9 @@ + /************************************************************************* + * _REG relative to RSET_MISC + *************************************************************************/ ++#define MISC_SERDES_CTRL_REG 0x0 ++#define SERDES_PCIE_EN (1 << 0) ++#define SERDES_PCIE_EXD_EN (1 << 15) + + #define MISC_STRAPBUS_6328_REG 0x240 + #define STRAPBUS_6328_FCVO_SHIFT 7 +@@ -1170,4 +1173,55 @@ + #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28) + #define STRAPBUS_6328_BOOT_SEL_NAND (0 << 28) + ++/************************************************************************* ++ * _REG relative to RSET_PCIE ++ *************************************************************************/ ++ ++#define PCIE_CONFIG2_REG 0x408 ++#define CONFIG2_BAR1_SIZE_EN 1 ++#define CONFIG2_BAR1_SIZE_MASK 0xf ++ ++#define PCIE_IDVAL3_REG 0x43c ++#define IDVAL3_CLASS_CODE_MASK 0xffffff ++#define IDVAL3_SUBCLASS_SHIFT 8 ++#define IDVAL3_CLASS_SHIFT 16 ++ ++#define PCIE_DLSTATUS_REG 0x1048 ++#define DLSTATUS_PHYLINKUP (1 << 13) ++ ++#define PCIE_BRIDGE_OPT1_REG 0x2820 ++#define OPT1_RD_BE_OPT_EN (1 << 7) ++#define OPT1_RD_REPLY_BE_FIX_EN (1 << 9) ++#define OPT1_PCIE_BRIDGE_HOLE_DET_EN (1 << 11) ++#define OPT1_L1_INT_STATUS_MASK_POL (1 << 12) ++ ++#define PCIE_BRIDGE_OPT2_REG 0x2824 ++#define OPT2_UBUS_UR_DECODE_DIS (1 << 2) ++#define OPT2_TX_CREDIT_CHK_EN (1 << 4) ++#define OPT2_CFG_TYPE1_BD_SEL (1 << 7) ++#define OPT2_CFG_TYPE1_BUS_NO_SHIFT 16 ++#define OPT2_CFG_TYPE1_BUS_NO_MASK (0xff << OPT2_CFG_TYPE1_BUS_NO_SHIFT) ++ ++#define PCIE_BRIDGE_BAR0_BASEMASK_REG 0x2828 ++#define PCIE_BRIDGE_BAR1_BASEMASK_REG 0x2830 ++#define BASEMASK_REMAP_EN (1 << 0) ++#define BASEMASK_SWAP_EN (1 << 1) ++#define BASEMASK_MASK_SHIFT 4 ++#define BASEMASK_MASK_MASK (0xfff << BASEMASK_MASK_SHIFT) ++#define BASEMASK_BASE_SHIFT 20 ++#define BASEMASK_BASE_MASK (0xfff << BASEMASK_BASE_SHIFT) ++ ++#define PCIE_BRIDGE_BAR0_REBASE_ADDR_REG 0x282c ++#define PCIE_BRIDGE_BAR1_REBASE_ADDR_REG 0x2834 ++#define REBASE_ADDR_BASE_SHIFT 20 ++#define REBASE_ADDR_BASE_MASK (0xfff << REBASE_ADDR_BASE_SHIFT) ++ ++#define PCIE_BRIDGE_RC_INT_MASK_REG 0x2854 ++#define PCIE_RC_INT_A (1 << 0) ++#define PCIE_RC_INT_B (1 << 1) ++#define PCIE_RC_INT_C (1 << 2) ++#define PCIE_RC_INT_D (1 << 3) ++ ++#define PCIE_DEVICE_OFFSET 0x8000 ++ + #endif /* BCM63XX_REGS_H_ */ diff --git a/target/linux/brcm63xx/patches-3.3/317-MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/317-MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch new file mode 100644 index 0000000000..c33aaa438b --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/317-MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch @@ -0,0 +1,240 @@ +From e170282d7d12f4a26f10d4b666b158d24810d2f6 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Sun, 3 Jul 2011 03:41:02 +0200 +Subject: [PATCH 47/79] MIPS: BCM63XX: Add PCIe Support for BCM6328 + +Signed-off-by: Jonas Gorski +--- + arch/mips/pci/ops-bcm63xx.c | 61 +++++++++++++++++++++++ + arch/mips/pci/pci-bcm63xx.c | 112 +++++++++++++++++++++++++++++++++++++++++++ + arch/mips/pci/pci-bcm63xx.h | 5 ++ + 3 files changed, 178 insertions(+) + +--- a/arch/mips/pci/ops-bcm63xx.c ++++ b/arch/mips/pci/ops-bcm63xx.c +@@ -465,3 +465,64 @@ static void bcm63xx_fixup(struct pci_dev + + DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup); + #endif ++ ++static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn) ++{ ++ switch (bus->number) { ++ case PCIE_BUS_BRIDGE: ++ return (PCI_SLOT(devfn) == 0); ++ case PCIE_BUS_DEVICE: ++ if (PCI_SLOT(devfn) == 0) ++ return bcm_pcie_readl(PCIE_DLSTATUS_REG) ++ & DLSTATUS_PHYLINKUP; ++ default: ++ return false; ++ } ++} ++ ++static int bcm63xx_pcie_read(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 *val) ++{ ++ u32 data; ++ u32 reg = where & ~3; ++ ++ if (!bcm63xx_pcie_can_access(bus, devfn)) ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ ++ if (bus->number == PCIE_BUS_DEVICE) ++ reg += PCIE_DEVICE_OFFSET; ++ ++ data = bcm_pcie_readl(reg); ++ ++ *val = postprocess_read(data, where, size); ++ ++ return PCIBIOS_SUCCESSFUL; ++ ++} ++ ++static int bcm63xx_pcie_write(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 val) ++{ ++ u32 data; ++ u32 reg = where & ~3; ++ ++ if (!bcm63xx_pcie_can_access(bus, devfn)) ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ ++ if (bus->number == PCIE_BUS_DEVICE) ++ reg += PCIE_DEVICE_OFFSET; ++ ++ ++ data = bcm_pcie_readl(reg); ++ ++ data = preprocess_write(data, val, where, size); ++ bcm_pcie_writel(data, reg); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++ ++struct pci_ops bcm63xx_pcie_ops = { ++ .read = bcm63xx_pcie_read, ++ .write = bcm63xx_pcie_write ++}; +--- a/arch/mips/pci/pci-bcm63xx.c ++++ b/arch/mips/pci/pci-bcm63xx.c +@@ -10,6 +10,7 @@ + #include + #include + #include ++#include + #include + + #include "pci-bcm63xx.h" +@@ -65,6 +66,26 @@ struct pci_controller bcm63xx_cb_control + }; + #endif + ++static struct resource bcm_pcie_mem_resource = { ++ .name = "bcm63xx PCIe memory space", ++ .start = BCM_PCIE_MEM_BASE_PA, ++ .end = BCM_PCIE_MEM_END_PA, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource bcm_pcie_io_resource = { ++ .name = "bcm63xx PCIe IO space", ++ .start = 0, ++ .end = 0, ++ .flags = 0, ++}; ++ ++struct pci_controller bcm63xx_pcie_controller = { ++ .pci_ops = &bcm63xx_pcie_ops, ++ .io_resource = &bcm_pcie_io_resource, ++ .mem_resource = &bcm_pcie_mem_resource, ++}; ++ + static u32 bcm63xx_int_cfg_readl(u32 reg) + { + u32 tmp; +@@ -88,6 +109,95 @@ static void bcm63xx_int_cfg_writel(u32 v + + void __iomem *pci_iospace_start; + ++static void __init bcm63xx_reset_pcie(void) ++{ ++ u32 val; ++ ++ /* enable clock */ ++ val = bcm_perf_readl(PERF_CKCTL_REG); ++ val |= CKCTL_6328_PCIE_EN; ++ bcm_perf_writel(val, PERF_CKCTL_REG); ++ ++ /* enable SERDES */ ++ val = bcm_misc_readl(MISC_SERDES_CTRL_REG); ++ val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN; ++ bcm_misc_writel(val, MISC_SERDES_CTRL_REG); ++ ++ /* reset the PCIe core */ ++ val = bcm_perf_readl(PERF_SOFTRESET_6328_REG); ++ ++ val &= ~SOFTRESET_6328_PCIE_MASK; ++ val &= ~SOFTRESET_6328_PCIE_CORE_MASK; ++ val &= ~SOFTRESET_6328_PCIE_HARD_MASK; ++ val &= ~SOFTRESET_6328_PCIE_EXT_MASK; ++ bcm_perf_writel(val, PERF_SOFTRESET_6328_REG); ++ mdelay(10); ++ ++ val |= SOFTRESET_6328_PCIE_MASK; ++ val |= SOFTRESET_6328_PCIE_CORE_MASK; ++ val |= SOFTRESET_6328_PCIE_HARD_MASK; ++ bcm_perf_writel(val, PERF_SOFTRESET_6328_REG); ++ mdelay(10); ++ ++ val |= SOFTRESET_6328_PCIE_EXT_MASK; ++ bcm_perf_writel(val, PERF_SOFTRESET_6328_REG); ++ mdelay(200); ++} ++ ++static int __init bcm63xx_register_pcie(void) ++{ ++ u32 val; ++ ++ bcm63xx_reset_pcie(); ++ ++ /* configure the PCIe bridge */ ++ val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG); ++ val |= OPT1_RD_BE_OPT_EN; ++ val |= OPT1_RD_REPLY_BE_FIX_EN; ++ val |= OPT1_PCIE_BRIDGE_HOLE_DET_EN; ++ val |= OPT1_L1_INT_STATUS_MASK_POL; ++ bcm_pcie_writel(val, PCIE_BRIDGE_OPT1_REG); ++ ++ /* setup the interrupts */ ++ val = bcm_pcie_readl(PCIE_BRIDGE_RC_INT_MASK_REG); ++ val |= PCIE_RC_INT_A | PCIE_RC_INT_B | PCIE_RC_INT_C | PCIE_RC_INT_D; ++ bcm_pcie_writel(val, PCIE_BRIDGE_RC_INT_MASK_REG); ++ ++ val = bcm_pcie_readl(PCIE_BRIDGE_OPT2_REG); ++ /* enable credit checking and error checking */ ++ val |= OPT2_TX_CREDIT_CHK_EN; ++ val |= OPT2_UBUS_UR_DECODE_DIS; ++ ++ /* set device bus/func for the pcie device */ ++ val |= (PCIE_BUS_DEVICE << OPT2_CFG_TYPE1_BUS_NO_SHIFT); ++ val |= OPT2_CFG_TYPE1_BD_SEL; ++ bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG); ++ ++ /* setup class code as bridge */ ++ val = bcm_pcie_readl(PCIE_IDVAL3_REG); ++ val &= ~IDVAL3_CLASS_CODE_MASK; ++ val |= (PCI_CLASS_BRIDGE_PCI << IDVAL3_SUBCLASS_SHIFT); ++ bcm_pcie_writel(val, PCIE_IDVAL3_REG); ++ ++ /* disable bar1 size */ ++ val = bcm_pcie_readl(PCIE_CONFIG2_REG); ++ val &= ~CONFIG2_BAR1_SIZE_MASK; ++ bcm_pcie_writel(val, PCIE_CONFIG2_REG); ++ ++ /* set bar0 to little endian */ ++ val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT; ++ val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT; ++ val |= BASEMASK_REMAP_EN; ++ bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG); ++ ++ val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT; ++ bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG); ++ ++ register_pci_controller(&bcm63xx_pcie_controller); ++ ++ return 0; ++} ++ + static int __init bcm63xx_register_pci(void) + { + unsigned int mem_size; +@@ -211,6 +321,8 @@ static int __init bcm63xx_register_pci(v + int __init bcm63xx_pci_register(void) + { + switch (bcm63xx_get_cpu_id()) { ++ case BCM6328_CPU_ID: ++ return bcm63xx_register_pcie(); + case BCM6348_CPU_ID: + case BCM6358_CPU_ID: + case BCM6368_CPU_ID: +--- a/arch/mips/pci/pci-bcm63xx.h ++++ b/arch/mips/pci/pci-bcm63xx.h +@@ -13,11 +13,16 @@ + */ + #define CARDBUS_PCI_IDSEL 0x8 + ++ ++#define PCIE_BUS_BRIDGE 0 ++#define PCIE_BUS_DEVICE 1 ++ + /* + * defined in ops-bcm63xx.c + */ + extern struct pci_ops bcm63xx_pci_ops; + extern struct pci_ops bcm63xx_cb_ops; ++extern struct pci_ops bcm63xx_pcie_ops; + + /* + * defined in pci-bcm63xx.c diff --git a/target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch b/target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch index 279d013fc0..636e183d7c 100644 --- a/target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch +++ b/target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch @@ -15,7 +15,7 @@ Subject: [PATCH 24/63] MIPS: BCM63XX: register ohci device. --- a/arch/mips/bcm63xx/Kconfig +++ b/arch/mips/bcm63xx/Kconfig -@@ -4,26 +4,25 @@ menu "CPU support" +@@ -8,26 +8,25 @@ config BCM63XX_CPU_6328 config BCM63XX_CPU_6338 bool "support 6338 CPU" select HW_HAS_PCI @@ -66,7 +66,7 @@ Subject: [PATCH 24/63] MIPS: BCM63XX: register ohci device. #include #include -@@ -906,6 +907,9 @@ int __init board_register_devices(void) +@@ -911,6 +912,9 @@ int __init board_register_devices(void) !board_get_mac_address(board.enet1.mac_addr)) bcm63xx_enet_register(1, &board.enet1); diff --git a/target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch b/target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch index 9ca91be24f..5a13013b62 100644 --- a/target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch +++ b/target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch @@ -15,7 +15,7 @@ Subject: [PATCH 26/63] MIPS: BCM63XX: register ehci device. --- a/arch/mips/bcm63xx/Kconfig +++ b/arch/mips/bcm63xx/Kconfig -@@ -18,11 +18,13 @@ config BCM63XX_CPU_6358 +@@ -22,11 +22,13 @@ config BCM63XX_CPU_6358 bool "support 6358 CPU" select HW_HAS_PCI select USB_ARCH_HAS_OHCI if USB_SUPPORT @@ -49,7 +49,7 @@ Subject: [PATCH 26/63] MIPS: BCM63XX: register ehci device. #include #include -@@ -907,6 +908,9 @@ int __init board_register_devices(void) +@@ -912,6 +913,9 @@ int __init board_register_devices(void) !board_get_mac_address(board.enet1.mac_addr)) bcm63xx_enet_register(1, &board.enet1); diff --git a/target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch index f98c6babea..0f3b49b5e4 100644 --- a/target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch +++ b/target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch @@ -1,6 +1,6 @@ --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -845,6 +845,8 @@ void __init board_prom_init(void) +@@ -850,6 +850,8 @@ void __init board_prom_init(void) if (BCMCPU_IS_6348()) val |= GPIO_MODE_6348_G3_EXT_MII | GPIO_MODE_6348_G0_EXT_MII; @@ -11,7 +11,7 @@ bcm_gpio_writel(val, GPIO_MODE_REG); --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -468,6 +468,8 @@ +@@ -510,6 +510,8 @@ #define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7) #define GPIO_MODE_6358_SERIAL_LED (1 << 10) #define GPIO_MODE_6358_UTOPIA (1 << 12) diff --git a/target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch b/target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch index 3d7d3e8daa..512f53f9f0 100644 --- a/target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch +++ b/target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch @@ -50,7 +50,7 @@ Subject: [PATCH 30/63] bcm63xx_enet: split dma registers access. if (ret) --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -140,7 +140,9 @@ enum bcm63xx_regs_set { +@@ -156,7 +156,9 @@ enum bcm63xx_regs_set { #define BCM_6358_RSET_SPI_SIZE 1804 #define BCM_6368_RSET_SPI_SIZE 1804 #define RSET_ENET_SIZE 2048 diff --git a/target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch b/target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch index 79ce729f29..b6e082a803 100644 --- a/target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch +++ b/target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch @@ -13,7 +13,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -910,6 +910,10 @@ int __init board_register_devices(void) +@@ -915,6 +915,10 @@ int __init board_register_devices(void) !board_get_mac_address(board.enet1.mac_addr)) bcm63xx_enet_register(1, &board.enet1); @@ -205,7 +205,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s #endif /* ! BCM63XX_DEV_ENET_H_ */ --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -708,10 +708,60 @@ +@@ -750,10 +750,60 @@ * _REG relative to RSET_ENETSW *************************************************************************/ diff --git a/target/linux/brcm63xx/patches-3.3/416-bcm63xx_enet-fix-lockup-on-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/416-bcm63xx_enet-fix-lockup-on-BCM6328.patch new file mode 100644 index 0000000000..b0f55e0866 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/416-bcm63xx_enet-fix-lockup-on-BCM6328.patch @@ -0,0 +1,94 @@ +From 37d151859e09d09a950ad3ae615db1903bcc59d3 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Sun, 13 Nov 2011 14:59:37 +0100 +Subject: [PATCH 43/79] bcm63xx_enet: fix lockup on BCM6328 + +BCM6328 locks up on a maxburst size of 16, reduce it to 8 for BCM6328 and +BCM6368. + +Signed-off-by: Jonas Gorski +--- + drivers/net/ethernet/broadcom/bcm63xx_enet.c | 14 ++++++++------ + drivers/net/ethernet/broadcom/bcm63xx_enet.h | 4 ++++ + 2 files changed, 12 insertions(+), 6 deletions(-) + +--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c ++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c +@@ -261,7 +261,6 @@ static int bcm_enet_refill_rx(struct net + if (!skb) + break; + priv->rx_skb[desc_idx] = skb; +- + p = dma_map_single(&priv->pdev->dev, skb->data, + priv->rx_skb_size, + DMA_FROM_DEVICE); +@@ -995,9 +994,9 @@ static int bcm_enet_open(struct net_devi + enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG); + + /* set dma maximum burst len */ +- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST, ++ enet_dmac_writel(priv, priv->dma_maxburst, + ENETDMAC_MAXBURST_REG(priv->rx_chan)); +- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST, ++ enet_dmac_writel(priv, priv->dma_maxburst, + ENETDMAC_MAXBURST_REG(priv->tx_chan)); + + /* set correct transmit fifo watermark */ +@@ -1593,7 +1592,7 @@ static int compute_hw_mtu(struct bcm_ene + * it's appended + */ + priv->rx_skb_size = ALIGN(actual_mtu + ETH_FCS_LEN, +- BCMENET_DMA_MAXBURST * 4); ++ priv->dma_maxburst * 4); + return 0; + } + +@@ -1700,6 +1699,8 @@ static int __devinit bcm_enet_probe(stru + return -ENOMEM; + priv = netdev_priv(dev); + ++ priv->dma_maxburst = bcm_enet_is_sw(priv) ? ++ BCMENETSW_DMA_MAXBURST : BCMENET_DMA_MAXBURST; + ret = compute_hw_mtu(priv, dev->mtu); + if (ret) + goto out; +@@ -2263,9 +2264,9 @@ static int bcm_enetsw_open(struct net_de + enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan)); + + /* set dma maximum burst len */ +- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST, ++ enet_dmac_writel(priv, priv->dma_maxburst, + ENETDMAC_MAXBURST_REG(priv->rx_chan)); +- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST, ++ enet_dmac_writel(priv, priv->dma_maxburst, + ENETDMAC_MAXBURST_REG(priv->tx_chan)); + + /* set flow control low/high threshold to 1/3 / 2/3 */ +@@ -2727,6 +2728,7 @@ static int __devinit bcm_enetsw_probe(st + priv->irq_tx = irq_tx; + priv->rx_ring_size = BCMENET_DEF_RX_DESC; + priv->tx_ring_size = BCMENET_DEF_TX_DESC; ++ priv->dma_maxburst = BCMENETSW_DMA_MAXBURST; + + pd = pdev->dev.platform_data; + if (pd) { +--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h ++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h +@@ -17,6 +17,7 @@ + + /* maximum burst len for dma (4 bytes unit) */ + #define BCMENET_DMA_MAXBURST 16 ++#define BCMENETSW_DMA_MAXBURST 8 + + /* tx transmit threshold (4 bytes unit), fifo is 256 bytes, the value + * must be low enough so that a DMA transfer of above burst length can +@@ -280,6 +281,9 @@ struct bcm_enet_priv { + /* number of dma desc in tx ring */ + int tx_ring_size; + ++ /* maximum dma burst size */ ++ int dma_maxburst; ++ + /* cpu view of rx dma ring */ + struct bcm_enet_desc *tx_desc_cpu; + diff --git a/target/linux/brcm63xx/patches-3.3/417-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch b/target/linux/brcm63xx/patches-3.3/417-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch new file mode 100644 index 0000000000..cf77679d24 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/417-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch @@ -0,0 +1,92 @@ +From 44e21f4c7c556573fff0432f7846086763df3455 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Tue, 14 Jun 2011 21:14:39 +0200 +Subject: [PATCH 44/79] MIPS: BCM63XX: add support for BCM6328 in bcm_enetsw + +Signed-off-by: Jonas Gorski +--- + arch/mips/bcm63xx/clk.c | 34 +++++++++++++++++++------- + arch/mips/bcm63xx/dev-enet.c | 4 +-- + drivers/net/ethernet/broadcom/bcm63xx_enet.h | 2 +- + 3 files changed, 28 insertions(+), 12 deletions(-) + +--- a/arch/mips/bcm63xx/clk.c ++++ b/arch/mips/bcm63xx/clk.c +@@ -118,21 +118,37 @@ static struct clk clk_ephy = { + */ + static void enetsw_set(struct clk *clk, int enable) + { +- if (!BCMCPU_IS_6368()) ++ u32 mask; ++ ++ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368()) + return; +- bcm_hwclock_set(CKCTL_6368_ROBOSW_EN | +- CKCTL_6368_SWPKT_USB_EN | +- CKCTL_6368_SWPKT_SAR_EN, enable); ++ ++ if (BCMCPU_IS_6328()) ++ mask = CKCTL_6328_ROBOSW_EN; ++ else ++ mask = CKCTL_6368_ROBOSW_EN | CKCTL_6368_SWPKT_USB_EN | ++ CKCTL_6368_SWPKT_SAR_EN; ++ ++ bcm_hwclock_set(mask, enable); + if (enable) { ++ u32 reg; + u32 val; + ++ if (BCMCPU_IS_6328()) { ++ reg = PERF_SOFTRESET_6328_REG; ++ mask = SOFTRESET_6328_ENETSW_MASK; ++ } else { ++ reg = PERF_SOFTRESET_6368_REG; ++ mask = SOFTRESET_6368_ENETSW_MASK; ++ } ++ + /* reset switch core afer clock change */ +- val = bcm_perf_readl(PERF_SOFTRESET_6368_REG); +- val &= ~SOFTRESET_6368_ENETSW_MASK; +- bcm_perf_writel(val, PERF_SOFTRESET_6368_REG); ++ val = bcm_perf_readl(reg); ++ val &= ~mask; ++ bcm_perf_writel(val, reg); + msleep(10); +- val |= SOFTRESET_6368_ENETSW_MASK; +- bcm_perf_writel(val, PERF_SOFTRESET_6368_REG); ++ val |= mask; ++ bcm_perf_writel(val, reg); + msleep(10); + } + } +--- a/arch/mips/bcm63xx/dev-enet.c ++++ b/arch/mips/bcm63xx/dev-enet.c +@@ -141,7 +141,7 @@ static int __init register_shared(void) + shared_res[0].end = shared_res[0].start; + shared_res[0].end += (RSET_ENETDMA_SIZE) - 1; + +- if (BCMCPU_IS_6368()) ++ if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) + chan_count = 32; + else + chan_count = 16; +@@ -224,7 +224,7 @@ bcm63xx_enetsw_register(const struct bcm + { + int ret; + +- if (!BCMCPU_IS_6368()) ++ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368()) + return -ENODEV; + + ret = register_shared(); +--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h ++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h +@@ -368,7 +368,7 @@ struct bcm_enet_priv { + + static inline int bcm_enet_is_sw(struct bcm_enet_priv *priv) + { +- if (BCMCPU_IS_6368()) ++ if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) + return 1; + else + return 0; diff --git a/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch b/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch index bd7c8b80db..03eee87c8f 100644 --- a/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch +++ b/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch @@ -551,7 +551,7 @@ /* * Register a sane SPROMv2 to make the on-board * bcm4318 WLAN work -@@ -848,6 +1368,9 @@ void __init board_prom_init(void) +@@ -853,6 +1373,9 @@ void __init board_prom_init(void) boardid_fixup(boot_addr); } diff --git a/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch b/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch index 894ac37961..c5898d2c58 100644 --- a/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch +++ b/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch @@ -72,9 +72,9 @@ #endif #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -1938,6 +1996,22 @@ void __init board_prom_init(void) - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; +@@ -1943,6 +2001,22 @@ void __init board_prom_init(void) + val &= MPI_CSBASE_BASE_MASK; + } boot_addr = (u8 *)KSEG1ADDR(val); + printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr); + @@ -105,7 +105,7 @@ #include #include #include -@@ -98,6 +99,13 @@ int __init bcm63xx_flash_register(void) +@@ -104,6 +105,13 @@ int __init bcm63xx_flash_register(void) val = bcm_mpi_readl(MPI_CSBASE_REG(0)); val &= MPI_CSBASE_BASE_MASK; diff --git a/target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch index 8866ece505..4b717bda08 100644 --- a/target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch +++ b/target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch @@ -102,7 +102,7 @@ Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board. }; static void __init nb4_nvram_fixup(void) -@@ -2280,12 +2358,25 @@ void __init board_prom_init(void) +@@ -2285,12 +2363,25 @@ void __init board_prom_init(void) if (board.has_pci) { if (BCMCPU_IS_6348()) val |= GPIO_MODE_6348_G2_PCI; diff --git a/target/linux/brcm63xx/patches-3.3/800-wl_exports.patch b/target/linux/brcm63xx/patches-3.3/800-wl_exports.patch index 17666d8354..49c52b33d5 100644 --- a/target/linux/brcm63xx/patches-3.3/800-wl_exports.patch +++ b/target/linux/brcm63xx/patches-3.3/800-wl_exports.patch @@ -22,7 +22,7 @@ * known 6338 boards */ #ifdef CONFIG_BCM63XX_CPU_6338 -@@ -2490,6 +2498,7 @@ void __init board_prom_init(void) +@@ -2495,6 +2503,7 @@ void __init board_prom_init(void) /* extract nvram data */ memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram)); -- cgit v1.2.3