From d3c9b5e81e3fa1c52e55a9f1235fe8a4f252ce14 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 8 May 2015 12:23:27 +0000
Subject: ar71xx: use a common naming scheme for LEDS on wnr2000-v4
It is common that the router provider be used rather than product name.
One can see this in target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45630 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
.../linux/ar71xx/base-files/etc/uci-defaults/01_leds | 14 +++++++-------
.../ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c | 18 +++++++++---------
2 files changed, 16 insertions(+), 16 deletions(-)
(limited to 'target/linux')
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 0a9a285220..741fbb580f 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -499,13 +499,13 @@ wlae-ag300n)
;;
wnr2000-v4)
- ucidef_set_led_netdev "wan" "WAN" "wnr2000-v4:green:wan" "eth1"
- ucidef_set_led_netdev "wlan" "WLAN" "wnr2000-v4:blue:wlan" "wlan0"
- ucidef_set_led_switch "lan1" "LAN1" "wnr2000-v4:amber:lan1" "switch0" "0x04"
- ucidef_set_led_switch "lan2" "LAN2" "wnr2000-v4:amber:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "wnr2000-v4:amber:lan3" "switch0" "0x10"
- ucidef_set_led_switch "lan4" "LAN4" "wnr2000-v4:amber:lan4" "switch0" "0x02"
- ucidef_set_led_usbdev "usb" "USB" "wnr2000-v4:amber:status" "1-1"
+ ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth1"
+ ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
+ ucidef_set_led_switch "lan1" "LAN1" "netgear:amber:lan1" "switch0" "0x04"
+ ucidef_set_led_switch "lan2" "LAN2" "netgear:amber:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "netgear:amber:lan3" "switch0" "0x10"
+ ucidef_set_led_switch "lan4" "LAN4" "netgear:amber:lan4" "switch0" "0x02"
+ ucidef_set_led_usbdev "usb" "USB" "netgear:amber:status" "1-1"
;;
wzr-hp-ag300h)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c
index d8437dce4d..36896b7271 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c
@@ -52,44 +52,44 @@
static struct gpio_led wnr2000v4_leds_gpio[] __initdata = {
{
- .name = "wnr2000-v4:green:power",
+ .name = "netgear:green:power",
.gpio = WNR2000V4_GPIO_LED_PWR_GREEN,
.active_low = 1,
.default_trigger = "default-on",
}, {
- .name = "wnr2000-v4:green:wan",
+ .name = "netgear:green:wan",
.gpio = WNR2000V4_GPIO_LED_WAN_AMBER,
.active_low = 1,
},
{
- .name = "wnr2000-v4:green:wps",
+ .name = "netgear:green:wps",
.gpio = WNR2000V4_GPIO_LED_WPS,
.active_low = 1,
},
{
- .name = "wnr2000-v4:amber:status",
+ .name = "netgear:amber:status",
.gpio = STATUS_LED_GPIO,
.active_low = 1,
},
{
- .name = "wnr2000-v4:blue:wlan",
+ .name = "netgear:blue:wlan",
.gpio = WNR2000V4_GPIO_LED_WLAN,
.active_low = 1,
},
{
- .name = "wnr2000-v4:amber:lan1",
+ .name = "netgear:amber:lan1",
.gpio = WNR2000V4_GPIO_LED_LAN1,
.active_low = 1,
}, {
- .name = "wnr2000-v4:amber:lan2",
+ .name = "netgear:amber:lan2",
.gpio = WNR2000V4_GPIO_LED_LAN2,
.active_low = 1,
}, {
- .name = "wnr2000-v4:amber:lan3",
+ .name = "netgear:amber:lan3",
.gpio = WNR2000V4_GPIO_LED_LAN3,
.active_low = 1,
}, {
- .name = "wnr2000-v4:amber:lan4",
+ .name = "netgear:amber:lan4",
.gpio = WNR2000V4_GPIO_LED_LAN4,
.active_low = 1,
}
--
cgit v1.2.3