From d0d3be5d8287ff737cfe4381c44706f1d8f7b881 Mon Sep 17 00:00:00 2001 From: Zoltan HERPAI Date: Wed, 27 Aug 2014 12:09:46 +0000 Subject: sunxi: initial 3.14 patchset Signed-off-by: Zoltan HERPAI git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42313 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches-3.14/195-2-ehci-plat-changes.patch | 552 +++++++++++++++++++++ 1 file changed, 552 insertions(+) create mode 100644 target/linux/sunxi/patches-3.14/195-2-ehci-plat-changes.patch (limited to 'target/linux/sunxi/patches-3.14/195-2-ehci-plat-changes.patch') diff --git a/target/linux/sunxi/patches-3.14/195-2-ehci-plat-changes.patch b/target/linux/sunxi/patches-3.14/195-2-ehci-plat-changes.patch new file mode 100644 index 0000000000..b8ee130c4a --- /dev/null +++ b/target/linux/sunxi/patches-3.14/195-2-ehci-plat-changes.patch @@ -0,0 +1,552 @@ +From 738b350437abfca820dae226549ecf4fb100fa30 Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Sun, 5 Jan 2014 00:04:02 +0100 +Subject: [PATCH] ehci-platform: Add support for clks and phy passed through + devicetree + +Currently ehci-platform is only used in combination with devicetree when used +with some Via socs. By extending it to (optionally) get clks and a phy from +devicetree, and enabling / disabling those on power_on / off, it can be used +more generically. Specifically after this commit it can be used for the +ehci controller on Allwinner sunxi SoCs. + +Since ehci-platform is intended to handle any generic enough non pci ehci +device, add a "usb-ehci" compatibility string. + +There already is a usb-ehci device-tree bindings document, update this +with clks and phy bindings info. + +Although actually quite generic so far the via,vt8500 compatibilty string +had its own bindings document. Somehow we even ended up with 2 of them. Since +these provide no extra information over the generic usb-ehci documentation, +this patch removes them. + +The ehci-ppc-of.c driver also claims the usb-ehci compatibility string, +even though it mostly is ibm,usb-ehci-440epx specific. ehci-platform.c is +not needed on ppc platforms, so add a !PPC_OF dependency to it to avoid +2 drivers claiming the same compatibility string getting build on ppc. + +Signed-off-by: Hans de Goede +Acked-by: Alan Stern +--- + Documentation/devicetree/bindings/usb/usb-ehci.txt | 25 +++- + .../devicetree/bindings/usb/via,vt8500-ehci.txt | 15 --- + .../devicetree/bindings/usb/vt8500-ehci.txt | 12 -- + drivers/usb/host/Kconfig | 1 + + drivers/usb/host/ehci-platform.c | 147 +++++++++++++++++---- + 5 files changed, 142 insertions(+), 58 deletions(-) + delete mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt + delete mode 100644 Documentation/devicetree/bindings/usb/vt8500-ehci.txt + +diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt +index fa18612..2c1aeeb 100644 +--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt ++++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt +@@ -7,13 +7,14 @@ Required properties: + (debug-port or other) can be also specified here, but only after + definition of standard EHCI registers. + - interrupts : one EHCI interrupt should be described here. +-If device registers are implemented in big endian mode, the device +-node should have "big-endian-regs" property. +-If controller implementation operates with big endian descriptors, +-"big-endian-desc" property should be specified. +-If both big endian registers and descriptors are used by the controller +-implementation, "big-endian" property can be specified instead of having +-both "big-endian-regs" and "big-endian-desc". ++ ++Optional properties: ++ - big-endian-regs : boolean, set this for hcds with big-endian registers ++ - big-endian-desc : boolean, set this for hcds with big-endian descriptors ++ - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc ++ - clocks : a list of phandle + clock specifier pairs ++ - phys : phandle + phy specifier pair ++ - phy-names : "usb" + + Example (Sequoia 440EPx): + ehci@e0000300 { +@@ -23,3 +24,13 @@ Example (Sequoia 440EPx): + reg = <0 e0000300 90 0 e0000390 70>; + big-endian; + }; ++ ++Example (Allwinner sun4i A10 SoC): ++ ehci0: usb@01c14000 { ++ compatible = "allwinner,sun4i-a10-ehci", "usb-ehci"; ++ reg = <0x01c14000 0x100>; ++ interrupts = <39>; ++ clocks = <&ahb_gates 1>; ++ phys = <&usbphy 1>; ++ phy-names = "usb"; ++ }; +diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt +deleted file mode 100644 +index 17b3ad1..0000000 +--- a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt ++++ /dev/null +@@ -1,15 +0,0 @@ +-VIA/Wondermedia VT8500 EHCI Controller +------------------------------------------------------ +- +-Required properties: +-- compatible : "via,vt8500-ehci" +-- reg : Should contain 1 register ranges(address and length) +-- interrupts : ehci controller interrupt +- +-Example: +- +- ehci@d8007900 { +- compatible = "via,vt8500-ehci"; +- reg = <0xd8007900 0x200>; +- interrupts = <43>; +- }; +diff --git a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/vt8500-ehci.txt +deleted file mode 100644 +index 5fb8fd6..0000000 +--- a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt ++++ /dev/null +@@ -1,12 +0,0 @@ +-VIA VT8500 and Wondermedia WM8xxx SoC USB controllers. +- +-Required properties: +- - compatible: Should be "via,vt8500-ehci" or "wm,prizm-ehci". +- - reg: Address range of the ehci registers. size should be 0x200 +- - interrupts: Should contain the ehci interrupt. +- +-usb: ehci@D8007100 { +- compatible = "wm,prizm-ehci", "usb-ehci"; +- reg = <0xD8007100 0x200>; +- interrupts = <1>; +-}; +diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig +index a9707da..e28cbe0 100644 +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -255,6 +255,7 @@ config USB_EHCI_ATH79 + + config USB_EHCI_HCD_PLATFORM + tristate "Generic EHCI driver for a platform device" ++ depends on !PPC_OF + default n + ---help--- + Adds an EHCI host driver for a generic platform device, which +diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c +index 01536cf..5ebd0b7 100644 +--- a/drivers/usb/host/ehci-platform.c ++++ b/drivers/usb/host/ehci-platform.c +@@ -3,6 +3,7 @@ + * + * Copyright 2007 Steven Brown + * Copyright 2010-2012 Hauke Mehrtens ++ * Copyright 2014 Hans de Goede + * + * Derived from the ohci-ssb driver + * Copyright 2007 Michael Buesch +@@ -18,6 +19,7 @@ + * + * Licensed under the GNU/GPL. See COPYING for details. + */ ++#include + #include + #include + #include +@@ -25,6 +27,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -33,6 +36,13 @@ + #include "ehci.h" + + #define DRIVER_DESC "EHCI generic platform driver" ++#define EHCI_MAX_CLKS 3 ++#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv) ++ ++struct ehci_platform_priv { ++ struct clk *clks[EHCI_MAX_CLKS]; ++ struct phy *phy; ++}; + + static const char hcd_name[] = "ehci-platform"; + +@@ -64,38 +74,90 @@ static int ehci_platform_reset(struct usb_hcd *hcd) + return 0; + } + ++static int ehci_platform_power_on(struct platform_device *dev) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(dev); ++ struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); ++ int clk, ret; ++ ++ for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) { ++ ret = clk_prepare_enable(priv->clks[clk]); ++ if (ret) ++ goto err_disable_clks; ++ } ++ ++ if (priv->phy) { ++ ret = phy_init(priv->phy); ++ if (ret) ++ goto err_disable_clks; ++ ++ ret = phy_power_on(priv->phy); ++ if (ret) ++ goto err_exit_phy; ++ } ++ ++ return 0; ++ ++err_exit_phy: ++ phy_exit(priv->phy); ++err_disable_clks: ++ while (--clk >= 0) ++ clk_disable_unprepare(priv->clks[clk]); ++ ++ return ret; ++} ++ ++static void ehci_platform_power_off(struct platform_device *dev) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(dev); ++ struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); ++ int clk; ++ ++ if (priv->phy) { ++ phy_power_off(priv->phy); ++ phy_exit(priv->phy); ++ } ++ ++ for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--) ++ if (priv->clks[clk]) ++ clk_disable_unprepare(priv->clks[clk]); ++} ++ + static struct hc_driver __read_mostly ehci_platform_hc_driver; + + static const struct ehci_driver_overrides platform_overrides __initconst = { +- .reset = ehci_platform_reset, ++ .reset = ehci_platform_reset, ++ .extra_priv_size = sizeof(struct ehci_platform_priv), + }; + +-static struct usb_ehci_pdata ehci_platform_defaults; ++static struct usb_ehci_pdata ehci_platform_defaults = { ++ .power_on = ehci_platform_power_on, ++ .power_suspend = ehci_platform_power_off, ++ .power_off = ehci_platform_power_off, ++}; + + static int ehci_platform_probe(struct platform_device *dev) + { + struct usb_hcd *hcd; + struct resource *res_mem; +- struct usb_ehci_pdata *pdata; +- int irq; +- int err; ++ struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); ++ struct ehci_platform_priv *priv; ++ int err, irq, clk = 0; + + if (usb_disabled()) + return -ENODEV; + + /* +- * use reasonable defaults so platforms don't have to provide these. +- * with DT probing on ARM, none of these are set. ++ * Use reasonable defaults so platforms don't have to provide these ++ * with DT probing on ARM. + */ +- if (!dev_get_platdata(&dev->dev)) +- dev->dev.platform_data = &ehci_platform_defaults; ++ if (!pdata) ++ pdata = &ehci_platform_defaults; + + err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); + if (err) + return err; + +- pdata = dev_get_platdata(&dev->dev); +- + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "no irq provided"); +@@ -107,17 +169,40 @@ static int ehci_platform_probe(struct platform_device *dev) + return -ENXIO; + } + ++ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, ++ dev_name(&dev->dev)); ++ if (!hcd) ++ return -ENOMEM; ++ ++ platform_set_drvdata(dev, hcd); ++ dev->dev.platform_data = pdata; ++ priv = hcd_to_ehci_priv(hcd); ++ ++ if (pdata == &ehci_platform_defaults && dev->dev.of_node) { ++ priv->phy = devm_phy_get(&dev->dev, "usb"); ++ if (IS_ERR(priv->phy)) { ++ err = PTR_ERR(priv->phy); ++ if (err == -EPROBE_DEFER) ++ goto err_put_hcd; ++ priv->phy = NULL; ++ } ++ ++ for (clk = 0; clk < EHCI_MAX_CLKS; clk++) { ++ priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); ++ if (IS_ERR(priv->clks[clk])) { ++ err = PTR_ERR(priv->clks[clk]); ++ if (err == -EPROBE_DEFER) ++ goto err_put_clks; ++ priv->clks[clk] = NULL; ++ break; ++ } ++ } ++ } ++ + if (pdata->power_on) { + err = pdata->power_on(dev); + if (err < 0) +- return err; +- } +- +- hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, +- dev_name(&dev->dev)); +- if (!hcd) { +- err = -ENOMEM; +- goto err_power; ++ goto err_put_clks; + } + + hcd->rsrc_start = res_mem->start; +@@ -126,22 +211,28 @@ static int ehci_platform_probe(struct platform_device *dev) + hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); +- goto err_put_hcd; ++ goto err_power; + } + err = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (err) +- goto err_put_hcd; ++ goto err_power; + + device_wakeup_enable(hcd->self.controller); + platform_set_drvdata(dev, hcd); + + return err; + +-err_put_hcd: +- usb_put_hcd(hcd); + err_power: + if (pdata->power_off) + pdata->power_off(dev); ++err_put_clks: ++ while (--clk >= 0) ++ clk_put(priv->clks[clk]); ++err_put_hcd: ++ if (pdata == &ehci_platform_defaults) ++ dev->dev.platform_data = NULL; ++ ++ usb_put_hcd(hcd); + + return err; + } +@@ -150,13 +241,19 @@ static int ehci_platform_remove(struct platform_device *dev) + { + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); ++ struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); ++ int clk; + + usb_remove_hcd(hcd); +- usb_put_hcd(hcd); + + if (pdata->power_off) + pdata->power_off(dev); + ++ for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) ++ clk_put(priv->clks[clk]); ++ ++ usb_put_hcd(hcd); ++ + if (pdata == &ehci_platform_defaults) + dev->dev.platform_data = NULL; + +@@ -207,8 +304,10 @@ static int ehci_platform_resume(struct device *dev) + static const struct of_device_id vt8500_ehci_ids[] = { + { .compatible = "via,vt8500-ehci", }, + { .compatible = "wm,prizm-ehci", }, ++ { .compatible = "usb-ehci", }, + {} + }; ++MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); + + static const struct platform_device_id ehci_platform_table[] = { + { "ehci-platform", 0 }, +-- +2.0.3 + +From 91fc5f6e5e90d412a6778efbe05e5306a1df5032 Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Tue, 21 Jan 2014 16:20:53 +0100 +Subject: [PATCH] ehci-platform: Add support for controllers with big-endian + regs / descriptors + +This uses the already documented devicetree booleans for this, see: +Documentation/devicetree/bindings/usb/usb-ehci.txt + +Signed-off-by: Hans de Goede +--- + drivers/usb/host/ehci-platform.c | 33 +++++++++++++++++++++++++++++++-- + 1 file changed, 31 insertions(+), 2 deletions(-) + +diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c +index 5ebd0b7..8fde649 100644 +--- a/drivers/usb/host/ehci-platform.c ++++ b/drivers/usb/host/ehci-platform.c +@@ -55,8 +55,10 @@ static int ehci_platform_reset(struct usb_hcd *hcd) + + hcd->has_tt = pdata->has_tt; + ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; +- ehci->big_endian_desc = pdata->big_endian_desc; +- ehci->big_endian_mmio = pdata->big_endian_mmio; ++ if (pdata->big_endian_desc) ++ ehci->big_endian_desc = 1; ++ if (pdata->big_endian_mmio) ++ ehci->big_endian_mmio = 1; + ehci->ignore_oc = pdata->ignore_oc; + + if (pdata->pre_setup) { +@@ -142,6 +144,7 @@ static int ehci_platform_probe(struct platform_device *dev) + struct resource *res_mem; + struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); + struct ehci_platform_priv *priv; ++ struct ehci_hcd *ehci; + int err, irq, clk = 0; + + if (usb_disabled()) +@@ -177,8 +180,34 @@ static int ehci_platform_probe(struct platform_device *dev) + platform_set_drvdata(dev, hcd); + dev->dev.platform_data = pdata; + priv = hcd_to_ehci_priv(hcd); ++ ehci = hcd_to_ehci(hcd); + + if (pdata == &ehci_platform_defaults && dev->dev.of_node) { ++ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs")) ++ ehci->big_endian_mmio = 1; ++ ++ if (of_property_read_bool(dev->dev.of_node, "big-endian-desc")) ++ ehci->big_endian_desc = 1; ++ ++ if (of_property_read_bool(dev->dev.of_node, "big-endian")) ++ ehci->big_endian_mmio = ehci->big_endian_desc = 1; ++ ++#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO ++ if (ehci->big_endian_mmio) { ++ dev_err(&dev->dev, ++ "Error big-endian-regs not compiled in\n"); ++ err = -EINVAL; ++ goto err_put_hcd; ++ } ++#endif ++#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC ++ if (ehci->big_endian_desc) { ++ dev_err(&dev->dev, ++ "Error big-endian-desc not compiled in\n"); ++ err = -EINVAL; ++ goto err_put_hcd; ++ } ++#endif + priv->phy = devm_phy_get(&dev->dev, "usb"); + if (IS_ERR(priv->phy)) { + err = PTR_ERR(priv->phy); +-- +2.0.3 + +From 4a1ce69fa8c4595483493cd7df21c66dbcca1307 Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Tue, 11 Feb 2014 11:46:13 +0100 +Subject: [PATCH] ehci-platform: Change compatible string from usb-ehci to + generic-ehci + +The initial versions of the devicetree enablement patches for ehci-platform +used "ehci-platform" as compatible string. However this was disliked by various +reviewers because the platform bus is a Linux invention and devicetree is +supposed to be OS agnostic. After much discussion I gave up, added a: +"depends on !PPC_OF" to Kconfig to avoid a known conflict with PPC-OF platforms +and went with the generic usb-ehci as requested. + +In retro-spect I should have chosen something different, the dts files for many +existing boards already claim to be compatible with "usb-ehci", ie they have: + + compatible = "ti,ehci-omap", "usb-ehci"; + +In theory this should not be a problem since the "ti,ehci-omap" entry takes +presedence, but in practice using a conflicting compatible string is an issue, +because it makes which driver gets used depend on driver registration order. + +This patch changes the compatible string claimed by ehci-platform to +"generic-ehci", avoiding the driver registration / module loading ordering +problems, and removes the "depends on !PPC_OF" workaround. + +Signed-off-by: Hans de Goede +--- + Documentation/devicetree/bindings/usb/usb-ehci.txt | 4 ++-- + drivers/usb/host/Kconfig | 1 - + drivers/usb/host/ehci-platform.c | 2 +- + 3 files changed, 3 insertions(+), 4 deletions(-) + +diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt +index 2c1aeeb..ff151ec 100644 +--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt ++++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt +@@ -1,7 +1,7 @@ + USB EHCI controllers + + Required properties: +- - compatible : should be "usb-ehci". ++ - compatible : should be "generic-ehci". + - reg : should contain at least address and length of the standard EHCI + register set for the device. Optional platform-dependent registers + (debug-port or other) can be also specified here, but only after +@@ -27,7 +27,7 @@ Example (Sequoia 440EPx): + + Example (Allwinner sun4i A10 SoC): + ehci0: usb@01c14000 { +- compatible = "allwinner,sun4i-a10-ehci", "usb-ehci"; ++ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; + reg = <0x01c14000 0x100>; + interrupts = <39>; + clocks = <&ahb_gates 1>; +diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig +index e28cbe0..a9707da 100644 +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -255,7 +255,6 @@ config USB_EHCI_ATH79 + + config USB_EHCI_HCD_PLATFORM + tristate "Generic EHCI driver for a platform device" +- depends on !PPC_OF + default n + ---help--- + Adds an EHCI host driver for a generic platform device, which +diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c +index 8fde649..1178730 100644 +--- a/drivers/usb/host/ehci-platform.c ++++ b/drivers/usb/host/ehci-platform.c +@@ -333,7 +333,7 @@ static int ehci_platform_resume(struct device *dev) + static const struct of_device_id vt8500_ehci_ids[] = { + { .compatible = "via,vt8500-ehci", }, + { .compatible = "wm,prizm-ehci", }, +- { .compatible = "usb-ehci", }, ++ { .compatible = "generic-ehci", }, + {} + }; + MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); +-- +2.0.3 + -- cgit v1.2.3