From 74dc0649ff0097f75faa26f4b85e61e334b458a4 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 11 Feb 2015 10:09:23 +0000 Subject: ipq806x: update target to v3.18 Patches in the ipq806x/patches folder were out of tree in v3.14. The newest patch at the time was from June, so we can safely assume that either the patches have been merged, or they have been rejected for a good reason. If patches are seen missing, we'll cherry-pick them on a per-needed basis. This new kernel have been tested on AP148, which seems to works fine. Signed-off-by: Mathieu Olivari git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44386 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- ...0096-ARM-dts-qcom-Add-APQ8084-SoC-support.patch | 208 --------------------- 1 file changed, 208 deletions(-) delete mode 100644 target/linux/ipq806x/patches/0096-ARM-dts-qcom-Add-APQ8084-SoC-support.patch (limited to 'target/linux/ipq806x/patches/0096-ARM-dts-qcom-Add-APQ8084-SoC-support.patch') diff --git a/target/linux/ipq806x/patches/0096-ARM-dts-qcom-Add-APQ8084-SoC-support.patch b/target/linux/ipq806x/patches/0096-ARM-dts-qcom-Add-APQ8084-SoC-support.patch deleted file mode 100644 index 18630595c4..0000000000 --- a/target/linux/ipq806x/patches/0096-ARM-dts-qcom-Add-APQ8084-SoC-support.patch +++ /dev/null @@ -1,208 +0,0 @@ -From 8c52931421759b70fc37771be3390813a2a2f9f5 Mon Sep 17 00:00:00 2001 -From: Georgi Djakov -Date: Fri, 23 May 2014 18:12:29 +0300 -Subject: [PATCH 096/182] ARM: dts: qcom: Add APQ8084 SoC support - -Add support for the Qualcomm Snapdragon 805 APQ8084 SoC. It is -used on APQ8084-MTP and other boards. - -Signed-off-by: Georgi Djakov -Signed-off-by: Kumar Gala ---- - arch/arm/boot/dts/qcom-apq8084.dtsi | 179 +++++++++++++++++++++++++++++++++++ - arch/arm/mach-qcom/board.c | 1 + - 2 files changed, 180 insertions(+) - create mode 100644 arch/arm/boot/dts/qcom-apq8084.dtsi - ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi -@@ -0,0 +1,179 @@ -+/dts-v1/; -+ -+#include "skeleton.dtsi" -+ -+/ { -+ model = "Qualcomm APQ 8084"; -+ compatible = "qcom,apq8084"; -+ interrupt-parent = <&intc>; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ device_type = "cpu"; -+ compatible = "qcom,krait"; -+ reg = <0>; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; -+ qcom,acc = <&acc0>; -+ }; -+ -+ cpu@1 { -+ device_type = "cpu"; -+ compatible = "qcom,krait"; -+ reg = <1>; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; -+ qcom,acc = <&acc1>; -+ }; -+ -+ cpu@2 { -+ device_type = "cpu"; -+ compatible = "qcom,krait"; -+ reg = <2>; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; -+ qcom,acc = <&acc2>; -+ }; -+ -+ cpu@3 { -+ device_type = "cpu"; -+ compatible = "qcom,krait"; -+ reg = <3>; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; -+ qcom,acc = <&acc3>; -+ }; -+ -+ L2: l2-cache { -+ compatible = "qcom,arch-cache"; -+ cache-level = <2>; -+ qcom,saw = <&saw_l2>; -+ }; -+ }; -+ -+ cpu-pmu { -+ compatible = "qcom,krait-pmu"; -+ interrupts = <1 7 0xf04>; -+ }; -+ -+ timer { -+ compatible = "arm,armv7-timer"; -+ interrupts = <1 2 0xf08>, -+ <1 3 0xf08>, -+ <1 4 0xf08>, -+ <1 1 0xf08>; -+ clock-frequency = <19200000>; -+ }; -+ -+ soc: soc { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ compatible = "simple-bus"; -+ -+ intc: interrupt-controller@f9000000 { -+ compatible = "qcom,msm-qgic2"; -+ interrupt-controller; -+ #interrupt-cells = <3>; -+ reg = <0xf9000000 0x1000>, -+ <0xf9002000 0x1000>; -+ }; -+ -+ timer@f9020000 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ compatible = "arm,armv7-timer-mem"; -+ reg = <0xf9020000 0x1000>; -+ clock-frequency = <19200000>; -+ -+ frame@f9021000 { -+ frame-number = <0>; -+ interrupts = <0 8 0x4>, -+ <0 7 0x4>; -+ reg = <0xf9021000 0x1000>, -+ <0xf9022000 0x1000>; -+ }; -+ -+ frame@f9023000 { -+ frame-number = <1>; -+ interrupts = <0 9 0x4>; -+ reg = <0xf9023000 0x1000>; -+ status = "disabled"; -+ }; -+ -+ frame@f9024000 { -+ frame-number = <2>; -+ interrupts = <0 10 0x4>; -+ reg = <0xf9024000 0x1000>; -+ status = "disabled"; -+ }; -+ -+ frame@f9025000 { -+ frame-number = <3>; -+ interrupts = <0 11 0x4>; -+ reg = <0xf9025000 0x1000>; -+ status = "disabled"; -+ }; -+ -+ frame@f9026000 { -+ frame-number = <4>; -+ interrupts = <0 12 0x4>; -+ reg = <0xf9026000 0x1000>; -+ status = "disabled"; -+ }; -+ -+ frame@f9027000 { -+ frame-number = <5>; -+ interrupts = <0 13 0x4>; -+ reg = <0xf9027000 0x1000>; -+ status = "disabled"; -+ }; -+ -+ frame@f9028000 { -+ frame-number = <6>; -+ interrupts = <0 14 0x4>; -+ reg = <0xf9028000 0x1000>; -+ status = "disabled"; -+ }; -+ }; -+ -+ saw_l2: regulator@f9012000 { -+ compatible = "qcom,saw2"; -+ reg = <0xf9012000 0x1000>; -+ regulator; -+ }; -+ -+ acc0: clock-controller@f9088000 { -+ compatible = "qcom,kpss-acc-v2"; -+ reg = <0xf9088000 0x1000>, -+ <0xf9008000 0x1000>; -+ }; -+ -+ acc1: clock-controller@f9098000 { -+ compatible = "qcom,kpss-acc-v2"; -+ reg = <0xf9098000 0x1000>, -+ <0xf9008000 0x1000>; -+ }; -+ -+ acc2: clock-controller@f90a8000 { -+ compatible = "qcom,kpss-acc-v2"; -+ reg = <0xf90a8000 0x1000>, -+ <0xf9008000 0x1000>; -+ }; -+ -+ acc3: clock-controller@f90b8000 { -+ compatible = "qcom,kpss-acc-v2"; -+ reg = <0xf90b8000 0x1000>, -+ <0xf9008000 0x1000>; -+ }; -+ -+ restart@fc4ab000 { -+ compatible = "qcom,pshold"; -+ reg = <0xfc4ab000 0x4>; -+ }; -+ }; -+}; ---- a/arch/arm/mach-qcom/board.c -+++ b/arch/arm/mach-qcom/board.c -@@ -17,6 +17,7 @@ - static const char * const qcom_dt_match[] __initconst = { - "qcom,apq8064", - "qcom,apq8074-dragonboard", -+ "qcom,apq8084", - "qcom,msm8660-surf", - "qcom,msm8960-cdp", - NULL -- cgit v1.2.3