From a297ec8e13d10274155e0850228bb06c7648e541 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sat, 30 Aug 2014 09:32:58 +0000 Subject: ipq806x: Add support for IPQ806x chip family Patches are generated using the "format-patch" command from the following location: *https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base *rev=0771849495b4128cac2faf7d49c85c729fc48b20 Patches numbered 76/77/102/103 have already been integrated in 3.14.12, so they're not in this list. All these patches are either integrated are pending integration into kernel.org, therefore these patches should go away once the kernel gets upgraded to 3.16. Support is currently limited to AP148 board but can be extended to other platforms in the future. These changes do not cover ethernet connectivity. Signed-off-by: Mathieu Olivari git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42334 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- ...-ARM-dts-qcom-Update-msm8960-device-trees.patch | 268 +++++++++++++++++++++ 1 file changed, 268 insertions(+) create mode 100644 target/linux/ipq806x/patches/0092-ARM-dts-qcom-Update-msm8960-device-trees.patch (limited to 'target/linux/ipq806x/patches/0092-ARM-dts-qcom-Update-msm8960-device-trees.patch') diff --git a/target/linux/ipq806x/patches/0092-ARM-dts-qcom-Update-msm8960-device-trees.patch b/target/linux/ipq806x/patches/0092-ARM-dts-qcom-Update-msm8960-device-trees.patch new file mode 100644 index 0000000000..5c0c7a5d2b --- /dev/null +++ b/target/linux/ipq806x/patches/0092-ARM-dts-qcom-Update-msm8960-device-trees.patch @@ -0,0 +1,268 @@ +From 881200420e6ece87d9abbb13c0653d26455cdbdd Mon Sep 17 00:00:00 2001 +From: Kumar Gala +Date: Wed, 28 May 2014 12:09:53 -0500 +Subject: [PATCH 092/182] ARM: dts: qcom: Update msm8960 device trees + +* Move SoC peripherals into an SoC container node +* Move serial enabling into board file (qcom-msm8960-cdp.dts) +* Cleanup cpu node to match binding spec, enable-method and compatible + should be per cpu, not part of the container +* Drop interrupts property from l2-cache node as its not part of the + binding spec +* Add GSBI node and configuration of GSBI controller + +Signed-off-by: Kumar Gala +--- + arch/arm/boot/dts/qcom-msm8960-cdp.dts | 10 ++ + arch/arm/boot/dts/qcom-msm8960.dtsi | 176 ++++++++++++++++++-------------- + 2 files changed, 108 insertions(+), 78 deletions(-) + +diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts +index a58fb88..8f75cc4 100644 +--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts ++++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts +@@ -3,4 +3,14 @@ + / { + model = "Qualcomm MSM8960 CDP"; + compatible = "qcom,msm8960-cdp", "qcom,msm8960"; ++ ++ soc { ++ gsbi@16400000 { ++ status = "ok"; ++ qcom,mode = ; ++ serial@16440000 { ++ status = "ok"; ++ }; ++ }; ++ }; + }; +diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi +index 997b7b9..5303e53 100644 +--- a/arch/arm/boot/dts/qcom-msm8960.dtsi ++++ b/arch/arm/boot/dts/qcom-msm8960.dtsi +@@ -3,6 +3,7 @@ + /include/ "skeleton.dtsi" + + #include ++#include + + / { + model = "Qualcomm MSM8960"; +@@ -13,10 +14,10 @@ + #address-cells = <1>; + #size-cells = <0>; + interrupts = <1 14 0x304>; +- compatible = "qcom,krait"; +- enable-method = "qcom,kpss-acc-v1"; + + cpu@0 { ++ compatible = "qcom,krait"; ++ enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; +@@ -25,6 +26,8 @@ + }; + + cpu@1 { ++ compatible = "qcom,krait"; ++ enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; +@@ -35,7 +38,6 @@ + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; +- interrupts = <0 2 0x4>; + }; + }; + +@@ -45,91 +47,109 @@ + qcom,no-pc-write; + }; + +- intc: interrupt-controller@2000000 { +- compatible = "qcom,msm-qgic2"; +- interrupt-controller; +- #interrupt-cells = <3>; +- reg = < 0x02000000 0x1000 >, +- < 0x02002000 0x1000 >; +- }; ++ soc: soc { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ compatible = "simple-bus"; ++ ++ intc: interrupt-controller@2000000 { ++ compatible = "qcom,msm-qgic2"; ++ interrupt-controller; ++ #interrupt-cells = <3>; ++ reg = <0x02000000 0x1000>, ++ <0x02002000 0x1000>; ++ }; + +- timer@200a000 { +- compatible = "qcom,kpss-timer", "qcom,msm-timer"; +- interrupts = <1 1 0x301>, +- <1 2 0x301>, +- <1 3 0x301>; +- reg = <0x0200a000 0x100>; +- clock-frequency = <27000000>, +- <32768>; +- cpu-offset = <0x80000>; +- }; ++ timer@200a000 { ++ compatible = "qcom,kpss-timer", "qcom,msm-timer"; ++ interrupts = <1 1 0x301>, ++ <1 2 0x301>, ++ <1 3 0x301>; ++ reg = <0x0200a000 0x100>; ++ clock-frequency = <27000000>, ++ <32768>; ++ cpu-offset = <0x80000>; ++ }; + +- msmgpio: gpio@800000 { +- compatible = "qcom,msm-gpio"; +- gpio-controller; +- #gpio-cells = <2>; +- ngpio = <150>; +- interrupts = <0 16 0x4>; +- interrupt-controller; +- #interrupt-cells = <2>; +- reg = <0x800000 0x4000>; +- }; ++ msmgpio: gpio@800000 { ++ compatible = "qcom,msm-gpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ngpio = <150>; ++ interrupts = <0 16 0x4>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ reg = <0x800000 0x4000>; ++ }; + +- gcc: clock-controller@900000 { +- compatible = "qcom,gcc-msm8960"; +- #clock-cells = <1>; +- #reset-cells = <1>; +- reg = <0x900000 0x4000>; +- }; ++ gcc: clock-controller@900000 { ++ compatible = "qcom,gcc-msm8960"; ++ #clock-cells = <1>; ++ #reset-cells = <1>; ++ reg = <0x900000 0x4000>; ++ }; + +- clock-controller@4000000 { +- compatible = "qcom,mmcc-msm8960"; +- reg = <0x4000000 0x1000>; +- #clock-cells = <1>; +- #reset-cells = <1>; +- }; ++ clock-controller@4000000 { ++ compatible = "qcom,mmcc-msm8960"; ++ reg = <0x4000000 0x1000>; ++ #clock-cells = <1>; ++ #reset-cells = <1>; ++ }; + +- acc0: clock-controller@2088000 { +- compatible = "qcom,kpss-acc-v1"; +- reg = <0x02088000 0x1000>, <0x02008000 0x1000>; +- }; ++ acc0: clock-controller@2088000 { ++ compatible = "qcom,kpss-acc-v1"; ++ reg = <0x02088000 0x1000>, <0x02008000 0x1000>; ++ }; + +- acc1: clock-controller@2098000 { +- compatible = "qcom,kpss-acc-v1"; +- reg = <0x02098000 0x1000>, <0x02008000 0x1000>; +- }; ++ acc1: clock-controller@2098000 { ++ compatible = "qcom,kpss-acc-v1"; ++ reg = <0x02098000 0x1000>, <0x02008000 0x1000>; ++ }; + +- saw0: regulator@2089000 { +- compatible = "qcom,saw2"; +- reg = <0x02089000 0x1000>, <0x02009000 0x1000>; +- regulator; +- }; ++ saw0: regulator@2089000 { ++ compatible = "qcom,saw2"; ++ reg = <0x02089000 0x1000>, <0x02009000 0x1000>; ++ regulator; ++ }; + +- saw1: regulator@2099000 { +- compatible = "qcom,saw2"; +- reg = <0x02099000 0x1000>, <0x02009000 0x1000>; +- regulator; +- }; ++ saw1: regulator@2099000 { ++ compatible = "qcom,saw2"; ++ reg = <0x02099000 0x1000>, <0x02009000 0x1000>; ++ regulator; ++ }; + +- serial@16440000 { +- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; +- reg = <0x16440000 0x1000>, +- <0x16400000 0x1000>; +- interrupts = <0 154 0x0>; +- clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; +- clock-names = "core", "iface"; +- }; ++ gsbi5: gsbi@16400000 { ++ compatible = "qcom,gsbi-v1.0.0"; ++ reg = <0x16400000 0x100>; ++ clocks = <&gcc GSBI5_H_CLK>; ++ clock-names = "iface"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ serial@16440000 { ++ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; ++ reg = <0x16440000 0x1000>, ++ <0x16400000 0x1000>; ++ interrupts = <0 154 0x0>; ++ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; ++ clock-names = "core", "iface"; ++ status = "disabled"; ++ }; ++ }; + +- qcom,ssbi@500000 { +- compatible = "qcom,ssbi"; +- reg = <0x500000 0x1000>; +- qcom,controller-type = "pmic-arbiter"; +- }; ++ qcom,ssbi@500000 { ++ compatible = "qcom,ssbi"; ++ reg = <0x500000 0x1000>; ++ qcom,controller-type = "pmic-arbiter"; ++ }; + +- rng@1a500000 { +- compatible = "qcom,prng"; +- reg = <0x1a500000 0x200>; +- clocks = <&gcc PRNG_CLK>; +- clock-names = "core"; ++ rng@1a500000 { ++ compatible = "qcom,prng"; ++ reg = <0x1a500000 0x200>; ++ clocks = <&gcc PRNG_CLK>; ++ clock-names = "core"; ++ }; + }; + }; +-- +1.7.10.4 + -- cgit v1.2.3