From 2600871a239a17b07fcb329327694679fe490541 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 7 Aug 2015 08:36:31 +0000 Subject: ipq806x: add NAND flash controller support These patches add support for ipq806x NAND flash controller. Most of these are cherry-picked & backported from LKML: *https://lkml.org/lkml/2015/8/3/16 This patch just modifies the kernel code, but doesn't change the config. It should be harmless. Signed-off-by: Mathieu Olivari git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46568 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- ...nable-NAND-node-on-IPQ8064-AP148-platform.patch | 79 ++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch (limited to 'target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch') diff --git a/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch b/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch new file mode 100644 index 0000000000..94e4e6b2dd --- /dev/null +++ b/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch @@ -0,0 +1,79 @@ +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v3,5/5] arm: qcom: dts: Enable NAND node on IPQ8064 AP148 platform +From: Archit Taneja +X-Patchwork-Id: 6927091 +Message-Id: <1438578498-32254-6-git-send-email-architt@codeaurora.org> +To: linux-mtd@lists.infradead.org, dehrenberg@google.com, + cernekee@gmail.com, computersforpeace@gmail.com +Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org, + sboyd@codeaurora.org, linux-kernel@vger.kernel.org, + Archit Taneja , devicetree@vger.kernel.org +Date: Mon, 3 Aug 2015 10:38:18 +0530 + +Enable the NAND controller node on the AP148 platform. Provide pinmux +information. + +Cc: devicetree@vger.kernel.org + +Signed-off-by: Archit Taneja + +--- +arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++ + 1 file changed, 36 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts ++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +@@ -61,6 +61,31 @@ + bias-none; + }; + }; ++ ++ nand_pins: nand_pins { ++ mux { ++ pins = "gpio34", "gpio35", "gpio36", ++ "gpio37", "gpio38", "gpio39", ++ "gpio40", "gpio41", "gpio42", ++ "gpio43", "gpio44", "gpio45", ++ "gpio46", "gpio47"; ++ function = "nand"; ++ drive-strength = <10>; ++ bias-disable; ++ }; ++ ++ pullups { ++ pins = "gpio39"; ++ bias-pull-up; ++ }; ++ ++ hold { ++ pins = "gpio40", "gpio41", "gpio42", ++ "gpio43", "gpio44", "gpio45", ++ "gpio46", "gpio47"; ++ bias-bus-hold; ++ }; ++ }; + }; + + gsbi@16300000 { +@@ -174,5 +199,19 @@ + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + }; ++ ++ nand@1ac00000 { ++ status = "ok"; ++ ++ pinctrl-0 = <&nand_pins>; ++ pinctrl-names = "default"; ++ ++ nand-ecc-strength = <4>; ++ nand-bus-width = <8>; ++ }; + }; + }; ++ ++&adm_dma { ++ status = "ok"; ++}; -- cgit v1.2.3