From fc1cd99cfeb396cc9bf03c228a4e66446c526abe Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 12 May 2016 18:38:51 +0200 Subject: kernel: remove ocf support, cryptodev-linux should be used instead Signed-off-by: Felix Fietkau Signed-off-by: Ralph Sennhauser --- .../ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h | 751 --------------------- 1 file changed, 751 deletions(-) delete mode 100644 target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h (limited to 'target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h') diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h deleted file mode 100644 index f4cae50781..0000000000 --- a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h +++ /dev/null @@ -1,751 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/******************************************************************************* -* mvEth.h - Header File for : Marvell Gigabit Ethernet Controller -* -* DESCRIPTION: -* This header file contains macros typedefs and function declaration specific to -* the Marvell Gigabit Ethernet Controller. -* -* DEPENDENCIES: -* None. -* -*******************************************************************************/ - -#ifndef __mvEthGbe_h__ -#define __mvEthGbe_h__ - -extern MV_BOOL ethDescInSram; -extern MV_BOOL ethDescSwCoher; -extern ETH_PORT_CTRL* ethPortCtrl[]; - -static INLINE MV_ULONG ethDescVirtToPhy(ETH_QUEUE_CTRL* pQueueCtrl, MV_U8* pDesc) -{ -#if defined (ETH_DESCR_IN_SRAM) - if( ethDescInSram ) - return mvSramVirtToPhy(pDesc); - else -#endif /* ETH_DESCR_IN_SRAM */ - return (pQueueCtrl->descBuf.bufPhysAddr + (pDesc - pQueueCtrl->descBuf.bufVirtPtr)); -} -/* Return port handler */ -#define mvEthPortHndlGet(port) ethPortCtrl[port] - -/* Used as WA for HW/SW race on TX */ -static INLINE int mvEthPortTxEnable(void* pPortHndl, int queue, int max_deep) -{ - int deep = 0; - MV_U32 txCurrReg, txEnReg; - ETH_TX_DESC* pTxLastDesc; - ETH_QUEUE_CTRL* pQueueCtrl; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - txEnReg = MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)); - if( (txEnReg & MV_32BIT_LE_FAST(ETH_TXQ_ENABLE_MASK)) == 0) - { - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg; - return 0; - } - - pQueueCtrl = &pPortCtrl->txQueue[queue]; - pTxLastDesc = pQueueCtrl->pCurrentDescr; - txCurrReg = MV_REG_READ(ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue)); - if(ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxLastDesc) == txCurrReg) - { - /* All descriptors are processed, no chance for race */ - return 0; - } - - /* Check distance betwee HW and SW location: */ - /* If distance between HW and SW pointers is less than max_deep descriptors */ - /* Race condition is possible, so wait end of TX and restart TXQ */ - while(deep < max_deep) - { - pTxLastDesc = TX_PREV_DESC_PTR(pTxLastDesc, pQueueCtrl); - if(ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxLastDesc) == txCurrReg) - { - int count = 0; - - while( (txEnReg & MV_32BIT_LE_FAST(ETH_TXQ_ENABLE_MASK)) != 0) - { - count++; - if(count > 10000) - { - mvOsPrintf("mvEthPortTxEnable: timeout - TXQ_CMD=0x%08x\n", - MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) ); - break; - } - txEnReg = MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)); - } - - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg; - return count; - } - deep++; - } - /* Distance between HW and SW pointers is more than max_deep descriptors, */ - /* So NO race condition - do nothing */ - return -1; -} - - -/* defines */ -#define ETH_CSUM_MIN_BYTE_COUNT 72 - -/* Tailgate and Kirwood have only 2K TX FIFO */ -#if (MV_ETH_VERSION == 2) || (MV_ETH_VERSION == 4) -#define ETH_CSUM_MAX_BYTE_COUNT 1600 -#else -#define ETH_CSUM_MAX_BYTE_COUNT 9*1024 -#endif /* MV_ETH_VERSION */ - -#define ETH_MV_HEADER_SIZE 2 -#define ETH_MV_TX_EN - -/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */ -#define MIN_TX_BUFF_LOAD 8 -#define TX_BUF_OFFSET_IN_DESC (ETH_TX_DESC_ALIGNED_SIZE - MIN_TX_BUFF_LOAD) - -/* Default port configuration value */ -#define PORT_CONFIG_VALUE \ - ETH_DEF_RX_QUEUE_MASK(0) | \ - ETH_DEF_RX_ARP_QUEUE_MASK(0) | \ - ETH_DEF_RX_TCP_QUEUE_MASK(0) | \ - ETH_DEF_RX_UDP_QUEUE_MASK(0) | \ - ETH_DEF_RX_BPDU_QUEUE_MASK(0) | \ - ETH_RX_CHECKSUM_WITH_PSEUDO_HDR - -/* Default port extend configuration value */ -#define PORT_CONFIG_EXTEND_VALUE 0 - -#define PORT_SERIAL_CONTROL_VALUE \ - ETH_DISABLE_FC_AUTO_NEG_MASK | \ - BIT9 | \ - ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ - ETH_MAX_RX_PACKET_1552BYTE | \ - ETH_SET_FULL_DUPLEX_MASK - -#define PORT_SERIAL_CONTROL_100MB_FORCE_VALUE \ - ETH_FORCE_LINK_PASS_MASK | \ - ETH_DISABLE_DUPLEX_AUTO_NEG_MASK | \ - ETH_DISABLE_FC_AUTO_NEG_MASK | \ - BIT9 | \ - ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ - ETH_DISABLE_SPEED_AUTO_NEG_MASK | \ - ETH_SET_FULL_DUPLEX_MASK | \ - ETH_SET_MII_SPEED_100_MASK | \ - ETH_MAX_RX_PACKET_1552BYTE - - -#define PORT_SERIAL_CONTROL_1000MB_FORCE_VALUE \ - ETH_FORCE_LINK_PASS_MASK | \ - ETH_DISABLE_DUPLEX_AUTO_NEG_MASK | \ - ETH_DISABLE_FC_AUTO_NEG_MASK | \ - BIT9 | \ - ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ - ETH_DISABLE_SPEED_AUTO_NEG_MASK | \ - ETH_SET_FULL_DUPLEX_MASK | \ - ETH_SET_GMII_SPEED_1000_MASK | \ - ETH_MAX_RX_PACKET_1552BYTE - -#define PORT_SERIAL_CONTROL_SGMII_IBAN_VALUE \ - ETH_DISABLE_FC_AUTO_NEG_MASK | \ - BIT9 | \ - ETH_IN_BAND_AN_EN_MASK | \ - ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ - ETH_MAX_RX_PACKET_1552BYTE - -/* Function headers: */ -MV_VOID mvEthSetSpecialMcastTable(int portNo, int queue); -MV_STATUS mvEthArpRxQueue(void* pPortHandle, int arpQueue); -MV_STATUS mvEthUdpRxQueue(void* pPortHandle, int udpQueue); -MV_STATUS mvEthTcpRxQueue(void* pPortHandle, int tcpQueue); -MV_STATUS mvEthMacAddrGet(int portNo, unsigned char *pAddr); -MV_VOID mvEthSetOtherMcastTable(int portNo, int queue); -MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode); -/* Interrupt Coalesting functions */ -MV_U32 mvEthRxCoalSet(void* pPortHndl, MV_U32 uSec); -MV_U32 mvEthTxCoalSet(void* pPortHndl, MV_U32 uSec); -MV_STATUS mvEthCoalGet(void* pPortHndl, MV_U32* pRxCoal, MV_U32* pTxCoal); - -/******************************************************************************/ -/* Data Flow functions */ -/******************************************************************************/ -static INLINE void mvEthPortTxRestart(void* pPortHndl) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg; -} - -/* Get number of Free resources in specific TX queue */ -static INLINE int mvEthTxResourceGet(void* pPortHndl, int txQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - return (pPortCtrl->txQueue[txQueue].resource); -} - -/* Get number of Free resources in specific RX queue */ -static INLINE int mvEthRxResourceGet(void* pPortHndl, int rxQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - return (pPortCtrl->rxQueue[rxQueue].resource); -} - -static INLINE int mvEthTxQueueIsFull(void* pPortHndl, int txQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - if(pPortCtrl->txQueue[txQueue].resource == 0) - return MV_TRUE; - - return MV_FALSE; -} - -/* Get number of Free resources in specific RX queue */ -static INLINE int mvEthRxQueueIsFull(void* pPortHndl, int rxQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->rxQueue[rxQueue]; - - if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) && - (pQueueCtrl->resource != 0) ) - return MV_TRUE; - - return MV_FALSE; -} - -static INLINE int mvEthTxQueueIsEmpty(void* pPortHndl, int txQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->txQueue[txQueue]; - - if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) && - (pQueueCtrl->resource != 0) ) - { - return MV_TRUE; - } - return MV_FALSE; -} - -/* Get number of Free resources in specific RX queue */ -static INLINE int mvEthRxQueueIsEmpty(void* pPortHndl, int rxQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - if(pPortCtrl->rxQueue[rxQueue].resource == 0) - return MV_TRUE; - - return MV_FALSE; -} - -/******************************************************************************* -* mvEthPortTx - Send an Ethernet packet -* -* DESCRIPTION: -* This routine send a given packet described by pPktInfo parameter. -* Single buffer only. -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int txQueue - Number of Tx queue. -* MV_PKT_INFO *pPktInfo - User packet to send. -* -* RETURN: -* MV_NO_RESOURCE - No enough resources to send this packet. -* MV_ERROR - Unexpected Fatal error. -* MV_OK - Packet send successfully. -* -*******************************************************************************/ -static INLINE MV_STATUS mvEthPortTx(void* pEthPortHndl, int txQueue, MV_PKT_INFO* pPktInfo) -{ - ETH_TX_DESC* pTxCurrDesc; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - int portNo; - MV_BUF_INFO* pBufInfo = pPktInfo->pFrags; - -#ifdef ETH_DEBUG - if(pPortCtrl->portState != MV_ACTIVE) - return MV_BAD_STATE; -#endif /* ETH_DEBUG */ - - portNo = pPortCtrl->portNo; - pQueueCtrl = &pPortCtrl->txQueue[txQueue]; - - /* Get the Tx Desc ring indexes */ - pTxCurrDesc = pQueueCtrl->pCurrentDescr; - - /* Check if there is enough resources to send the packet */ - if(pQueueCtrl->resource == 0) - return MV_NO_RESOURCE; - - pTxCurrDesc->byteCnt = pBufInfo->dataSize; - - /* Flash Buffer */ - if(pPktInfo->pktSize != 0) - { -#ifdef MV_NETBSD - pTxCurrDesc->bufPtr = pBufInfo->bufPhysAddr; - ETH_PACKET_CACHE_FLUSH(pBufInfo->bufVirtPtr, pPktInfo->pktSize); -#else - pTxCurrDesc->bufPtr = ETH_PACKET_CACHE_FLUSH(pBufInfo->bufVirtPtr, pPktInfo->pktSize); -#endif - pPktInfo->pktSize = 0; - } - else - pTxCurrDesc->bufPtr = pBufInfo->bufPhysAddr; - - pTxCurrDesc->returnInfo = (MV_ULONG)pPktInfo; - - /* There is only one buffer in the packet */ - /* The OSG might set some bits for checksum offload, so add them to first descriptor */ - pTxCurrDesc->cmdSts = pPktInfo->status | - ETH_BUFFER_OWNED_BY_DMA | - ETH_TX_GENERATE_CRC_MASK | - ETH_TX_ENABLE_INTERRUPT_MASK | - ETH_TX_ZERO_PADDING_MASK | - ETH_TX_FIRST_DESC_MASK | - ETH_TX_LAST_DESC_MASK; - - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); - - pQueueCtrl->resource--; - pQueueCtrl->pCurrentDescr = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl); - - /* Apply send command */ - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(portNo)) = pPortCtrl->portTxQueueCmdReg; - - return MV_OK; -} - - -/******************************************************************************* -* mvEthPortSgTx - Send an Ethernet packet -* -* DESCRIPTION: -* This routine send a given packet described by pBufInfo parameter. It -* supports transmitting of a packet spaned over multiple buffers. -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int txQueue - Number of Tx queue. -* MV_PKT_INFO *pPktInfo - User packet to send. -* -* RETURN: -* MV_NO_RESOURCE - No enough resources to send this packet. -* MV_ERROR - Unexpected Fatal error. -* MV_OK - Packet send successfully. -* -*******************************************************************************/ -static INLINE MV_STATUS mvEthPortSgTx(void* pEthPortHndl, int txQueue, MV_PKT_INFO* pPktInfo) -{ - ETH_TX_DESC* pTxFirstDesc; - ETH_TX_DESC* pTxCurrDesc; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - int portNo, bufCount; - MV_BUF_INFO* pBufInfo = pPktInfo->pFrags; - MV_U8* pTxBuf; - -#ifdef ETH_DEBUG - if(pPortCtrl->portState != MV_ACTIVE) - return MV_BAD_STATE; -#endif /* ETH_DEBUG */ - - portNo = pPortCtrl->portNo; - pQueueCtrl = &pPortCtrl->txQueue[txQueue]; - - /* Get the Tx Desc ring indexes */ - pTxCurrDesc = pQueueCtrl->pCurrentDescr; - - /* Check if there is enough resources to send the packet */ - if(pQueueCtrl->resource < pPktInfo->numFrags) - return MV_NO_RESOURCE; - - /* Remember first desc */ - pTxFirstDesc = pTxCurrDesc; - - bufCount = 0; - while(MV_TRUE) - { - if(pBufInfo[bufCount].dataSize <= MIN_TX_BUFF_LOAD) - { - /* Buffers with a payload smaller than MIN_TX_BUFF_LOAD (8 bytes) must be aligned */ - /* to 64-bit boundary. Two options here: */ - /* 1) Usually, copy the payload to the reserved 8 bytes inside descriptor. */ - /* 2) In the Half duplex workaround, the reserved 8 bytes inside descriptor are used */ - /* as a pointer to the aligned buffer, copy the small payload to this buffer. */ - pTxBuf = ((MV_U8*)pTxCurrDesc)+TX_BUF_OFFSET_IN_DESC; - mvOsBCopy(pBufInfo[bufCount].bufVirtPtr, pTxBuf, pBufInfo[bufCount].dataSize); - pTxCurrDesc->bufPtr = ethDescVirtToPhy(pQueueCtrl, pTxBuf); - } - else - { - /* Flash Buffer */ -#ifdef MV_NETBSD - pTxCurrDesc->bufPtr = pBufInfo[bufCount].bufPhysAddr; - ETH_PACKET_CACHE_FLUSH(pBufInfo[bufCount].bufVirtPtr, pBufInfo[bufCount].dataSize); -#else - pTxCurrDesc->bufPtr = ETH_PACKET_CACHE_FLUSH(pBufInfo[bufCount].bufVirtPtr, pBufInfo[bufCount].dataSize); -#endif - } - - pTxCurrDesc->byteCnt = pBufInfo[bufCount].dataSize; - bufCount++; - - if(bufCount >= pPktInfo->numFrags) - break; - - if(bufCount > 1) - { - /* There is middle buffer of the packet Not First and Not Last */ - pTxCurrDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA; - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); - } - /* Go to next descriptor and next buffer */ - pTxCurrDesc = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl); - } - /* Set last desc with DMA ownership and interrupt enable. */ - pTxCurrDesc->returnInfo = (MV_ULONG)pPktInfo; - if(bufCount == 1) - { - /* There is only one buffer in the packet */ - /* The OSG might set some bits for checksum offload, so add them to first descriptor */ - pTxCurrDesc->cmdSts = pPktInfo->status | - ETH_BUFFER_OWNED_BY_DMA | - ETH_TX_GENERATE_CRC_MASK | - ETH_TX_ENABLE_INTERRUPT_MASK | - ETH_TX_ZERO_PADDING_MASK | - ETH_TX_FIRST_DESC_MASK | - ETH_TX_LAST_DESC_MASK; - - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); - } - else - { - /* Last but not First */ - pTxCurrDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | - ETH_TX_ENABLE_INTERRUPT_MASK | - ETH_TX_ZERO_PADDING_MASK | - ETH_TX_LAST_DESC_MASK; - - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); - - /* Update First when more than one buffer in the packet */ - /* The OSG might set some bits for checksum offload, so add them to first descriptor */ - pTxFirstDesc->cmdSts = pPktInfo->status | - ETH_BUFFER_OWNED_BY_DMA | - ETH_TX_GENERATE_CRC_MASK | - ETH_TX_FIRST_DESC_MASK; - - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxFirstDesc); - } - /* Update txQueue state */ - pQueueCtrl->resource -= bufCount; - pQueueCtrl->pCurrentDescr = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl); - - /* Apply send command */ - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(portNo)) = pPortCtrl->portTxQueueCmdReg; - - return MV_OK; -} - -/******************************************************************************* -* mvEthPortTxDone - Free all used Tx descriptors and mBlks. -* -* DESCRIPTION: -* This routine returns the transmitted packet information to the caller. -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int txQueue - Number of Tx queue. -* -* OUTPUT: -* MV_PKT_INFO *pPktInfo - Pointer to packet was sent. -* -* RETURN: -* MV_NOT_FOUND - No transmitted packets to return. Transmit in progress. -* MV_EMPTY - No transmitted packets to return. TX Queue is empty. -* MV_ERROR - Unexpected Fatal error. -* MV_OK - There is transmitted packet in the queue, -* 'pPktInfo' filled with relevant information. -* -*******************************************************************************/ -static INLINE MV_PKT_INFO* mvEthPortTxDone(void* pEthPortHndl, int txQueue) -{ - ETH_TX_DESC* pTxCurrDesc; - ETH_TX_DESC* pTxUsedDesc; - ETH_QUEUE_CTRL* pQueueCtrl; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - MV_PKT_INFO* pPktInfo; - MV_U32 commandStatus; - - pQueueCtrl = &pPortCtrl->txQueue[txQueue]; - - pTxUsedDesc = pQueueCtrl->pUsedDescr; - pTxCurrDesc = pQueueCtrl->pCurrentDescr; - - while(MV_TRUE) - { - /* No more used descriptors */ - commandStatus = pTxUsedDesc->cmdSts; - if (commandStatus & (ETH_BUFFER_OWNED_BY_DMA)) - { - ETH_DESCR_INV(pPortCtrl, pTxUsedDesc); - return NULL; - } - if( (pTxUsedDesc == pTxCurrDesc) && - (pQueueCtrl->resource != 0) ) - { - return NULL; - } - pQueueCtrl->resource++; - pQueueCtrl->pUsedDescr = TX_NEXT_DESC_PTR(pTxUsedDesc, pQueueCtrl); - if(commandStatus & (ETH_TX_LAST_DESC_MASK)) - { - pPktInfo = (MV_PKT_INFO*)pTxUsedDesc->returnInfo; - pPktInfo->status = commandStatus; - return pPktInfo; - } - pTxUsedDesc = pQueueCtrl->pUsedDescr; - } -} - -/******************************************************************************* -* mvEthPortRx - Get new received packets from Rx queue. -* -* DESCRIPTION: -* This routine returns the received data to the caller. There is no -* data copying during routine operation. All information is returned -* using pointer to packet information struct passed from the caller. -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int rxQueue - Number of Rx queue. -* -* OUTPUT: -* MV_PKT_INFO *pPktInfo - Pointer to received packet. -* -* RETURN: -* MV_NO_RESOURCE - No free resources in RX queue. -* MV_ERROR - Unexpected Fatal error. -* MV_OK - New packet received and 'pBufInfo' structure filled -* with relevant information. -* -*******************************************************************************/ -static INLINE MV_PKT_INFO* mvEthPortRx(void* pEthPortHndl, int rxQueue) -{ - ETH_RX_DESC *pRxCurrDesc; - MV_U32 commandStatus; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - MV_PKT_INFO* pPktInfo; - - pQueueCtrl = &(pPortCtrl->rxQueue[rxQueue]); - - /* Check resources */ - if(pQueueCtrl->resource == 0) - { - mvOsPrintf("ethPortRx: no more resources\n"); - return NULL; - } - while(MV_TRUE) - { - /* Get the Rx Desc ring 'curr and 'used' indexes */ - pRxCurrDesc = pQueueCtrl->pCurrentDescr; - - commandStatus = pRxCurrDesc->cmdSts; - if (commandStatus & (ETH_BUFFER_OWNED_BY_DMA)) - { - /* Nothing to receive... */ - ETH_DESCR_INV(pPortCtrl, pRxCurrDesc); - return NULL; - } - - /* Valid RX only if FIRST and LAST bits are set */ - if( (commandStatus & (ETH_RX_LAST_DESC_MASK | ETH_RX_FIRST_DESC_MASK)) == - (ETH_RX_LAST_DESC_MASK | ETH_RX_FIRST_DESC_MASK) ) - { - pPktInfo = (MV_PKT_INFO*)pRxCurrDesc->returnInfo; - pPktInfo->pFrags->dataSize = pRxCurrDesc->byteCnt - 4; - pPktInfo->status = commandStatus; - pPktInfo->fragIP = pRxCurrDesc->bufSize & ETH_RX_IP_FRAGMENTED_FRAME_MASK; - - pQueueCtrl->resource--; - /* Update 'curr' in data structure */ - pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxCurrDesc, pQueueCtrl); - -#ifdef INCLUDE_SYNC_BARR - mvCpuIfSyncBarr(DRAM_TARGET); -#endif - return pPktInfo; - } - else - { - ETH_RX_DESC* pRxUsedDesc = pQueueCtrl->pUsedDescr; - -#ifdef ETH_DEBUG - mvOsPrintf("ethDrv: Unexpected Jumbo frame: " - "status=0x%08x, byteCnt=%d, pData=0x%x\n", - commandStatus, pRxCurrDesc->byteCnt, pRxCurrDesc->bufPtr); -#endif /* ETH_DEBUG */ - - /* move buffer from pCurrentDescr position to pUsedDescr position */ - pRxUsedDesc->bufPtr = pRxCurrDesc->bufPtr; - pRxUsedDesc->returnInfo = pRxCurrDesc->returnInfo; - pRxUsedDesc->bufSize = pRxCurrDesc->bufSize & ETH_RX_BUFFER_MASK; - - /* Return the descriptor to DMA ownership */ - pRxUsedDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | - ETH_RX_ENABLE_INTERRUPT_MASK; - - /* Flush descriptor and CPU pipe */ - ETH_DESCR_FLUSH_INV(pPortCtrl, pRxUsedDesc); - - /* Move the used descriptor pointer to the next descriptor */ - pQueueCtrl->pUsedDescr = RX_NEXT_DESC_PTR(pRxUsedDesc, pQueueCtrl); - pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxCurrDesc, pQueueCtrl); - } - } -} - -/******************************************************************************* -* mvEthPortRxDone - Returns a Rx buffer back to the Rx ring. -* -* DESCRIPTION: -* This routine returns a Rx buffer back to the Rx ring. -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int rxQueue - Number of Rx queue. -* MV_PKT_INFO *pPktInfo - Pointer to received packet. -* -* RETURN: -* MV_ERROR - Unexpected Fatal error. -* MV_OUT_OF_RANGE - RX queue is already FULL, so this buffer can't be -* returned to this queue. -* MV_FULL - Buffer returned successfully and RX queue became full. -* More buffers should not be returned at the time. -* MV_OK - Buffer returned successfully and there are more free -* places in the queue. -* -*******************************************************************************/ -static INLINE MV_STATUS mvEthPortRxDone(void* pEthPortHndl, int rxQueue, MV_PKT_INFO *pPktInfo) -{ - ETH_RX_DESC* pRxUsedDesc; - ETH_QUEUE_CTRL* pQueueCtrl; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - - pQueueCtrl = &pPortCtrl->rxQueue[rxQueue]; - - /* Get 'used' Rx descriptor */ - pRxUsedDesc = pQueueCtrl->pUsedDescr; - - /* Check that ring is not FULL */ - if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) && - (pQueueCtrl->resource != 0) ) - { - mvOsPrintf("%s %d: out of range Error resource=%d, curr=%p, used=%p\n", - __FUNCTION__, pPortCtrl->portNo, pQueueCtrl->resource, - pQueueCtrl->pCurrentDescr, pQueueCtrl->pUsedDescr); - return MV_OUT_OF_RANGE; - } - - pRxUsedDesc->bufPtr = pPktInfo->pFrags->bufPhysAddr; - pRxUsedDesc->returnInfo = (MV_ULONG)pPktInfo; - pRxUsedDesc->bufSize = pPktInfo->pFrags->bufSize & ETH_RX_BUFFER_MASK; - - /* Invalidate data buffer accordingly with pktSize */ - if(pPktInfo->pktSize != 0) - { - ETH_PACKET_CACHE_INVALIDATE(pPktInfo->pFrags->bufVirtPtr, pPktInfo->pktSize); - pPktInfo->pktSize = 0; - } - - /* Return the descriptor to DMA ownership */ - pRxUsedDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT_MASK; - - /* Flush descriptor and CPU pipe */ - ETH_DESCR_FLUSH_INV(pPortCtrl, pRxUsedDesc); - - pQueueCtrl->resource++; - - /* Move the used descriptor pointer to the next descriptor */ - pQueueCtrl->pUsedDescr = RX_NEXT_DESC_PTR(pRxUsedDesc, pQueueCtrl); - - /* If ring became Full return MV_FULL */ - if(pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) - return MV_FULL; - - return MV_OK; -} - - -#endif /* __mvEthGbe_h__ */ - - -- cgit v1.2.3