From fc1cd99cfeb396cc9bf03c228a4e66446c526abe Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 12 May 2016 18:38:51 +0200 Subject: kernel: remove ocf support, cryptodev-linux should be used instead Signed-off-by: Felix Fietkau Signed-off-by: Ralph Sennhauser --- .../ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c | 2952 -------------------- 1 file changed, 2952 deletions(-) delete mode 100644 target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c (limited to 'target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c') diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c deleted file mode 100644 index d24e788fc7..0000000000 --- a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c +++ /dev/null @@ -1,2952 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/******************************************************************************* -* mvEth.c - Marvell's Gigabit Ethernet controller low level driver -* -* DESCRIPTION: -* This file introduce OS independent APIs to Marvell's Gigabit Ethernet -* controller. This Gigabit Ethernet Controller driver API controls -* 1) Operations (i.e. port Init, Finish, Up, Down, PhyReset etc'). -* 2) Data flow (i.e. port Send, Receive etc'). -* 3) MAC Filtering functions (ethSetMcastAddr, ethSetRxFilterMode, etc.) -* 4) MIB counters support (ethReadMibCounter) -* 5) Debug functions (ethPortRegs, ethPortCounters, ethPortQueues, etc.) -* Each Gigabit Ethernet port is controlled via ETH_PORT_CTRL struct. -* This struct includes configuration information as well as driver -* internal data needed for its operations. -* -* Supported Features: -* - OS independent. All required OS services are implemented via external -* OS dependent components (like osLayer or ethOsg) -* - The user is free from Rx/Tx queue managing. -* - Simple Gigabit Ethernet port operation API. -* - Simple Gigabit Ethernet port data flow API. -* - Data flow and operation API support per queue functionality. -* - Support cached descriptors for better performance. -* - PHY access and control API. -* - Port Configuration API. -* - Full control over Special and Other Multicast MAC tables. -* -*******************************************************************************/ -/* includes */ -#include "mvTypes.h" -#include "mv802_3.h" -#include "mvDebug.h" -#include "mvCommon.h" -#include "mvOs.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "eth-phy/mvEthPhy.h" -#include "eth/mvEth.h" -#include "eth/gbe/mvEthGbe.h" -#include "cpu/mvCpu.h" - -#ifdef INCLUDE_SYNC_BARR -#include "sys/mvCpuIf.h" -#endif - -#ifdef MV_RT_DEBUG -# define ETH_DEBUG -#endif - - -/* locals */ -MV_BOOL ethDescInSram; -MV_BOOL ethDescSwCoher; - -/* This array holds the control structure of each port */ -ETH_PORT_CTRL* ethPortCtrl[MV_ETH_MAX_PORTS]; - -/* Ethernet Port Local routines */ - -static void ethInitRxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue); - -static void ethInitTxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue); - -static void ethSetUcastTable(int portNo, int queue); - -static MV_BOOL ethSetUcastAddr (int ethPortNum, MV_U8 lastNibble, int queue); -static MV_BOOL ethSetSpecialMcastAddr(int ethPortNum, MV_U8 lastByte, int queue); -static MV_BOOL ethSetOtherMcastAddr(int ethPortNum, MV_U8 crc8, int queue); - -static void ethFreeDescrMemory(ETH_PORT_CTRL* pEthPortCtrl, MV_BUF_INFO* pDescBuf); -static MV_U8* ethAllocDescrMemory(ETH_PORT_CTRL* pEthPortCtrl, int size, - MV_ULONG* pPhysAddr, MV_U32 *memHandle); - -static MV_U32 mvEthMruGet(MV_U32 maxRxPktSize); - -static void mvEthPortSgmiiConfig(int port); - - - -/******************************************************************************/ -/* EthDrv Initialization functions */ -/******************************************************************************/ - -/******************************************************************************* -* mvEthHalInit - Initialize the Giga Ethernet unit -* -* DESCRIPTION: -* This function initialize the Giga Ethernet unit. -* 1) Configure Address decode windows of the unit -* 2) Set registers to HW default values. -* 3) Clear and Disable interrupts -* -* INPUT: NONE -* -* RETURN: NONE -* -* NOTE: this function is called once in the boot process. -*******************************************************************************/ -void mvEthHalInit(void) -{ - int port; - - /* Init static data structures */ - for (port=0; port 0) - { - isSram = MV_TRUE; - #if (INTEG_SRAM_COHER == MV_CACHE_COHER_SW) - isSwCoher = MV_TRUE; - #else - isSwCoher = MV_FALSE; - #endif - } -#endif /* ETH_DESCR_IN_SRAM */ - - if(pIsSram != NULL) - *pIsSram = isSram; - - if(pIsSwCoher != NULL) - *pIsSwCoher = isSwCoher; -} - - - -/******************************************************************************/ -/* Port Initialization functions */ -/******************************************************************************/ - -/******************************************************************************* -* mvEthPortInit - Initialize the Ethernet port driver -* -* DESCRIPTION: -* This function initialize the ethernet port. -* 1) Allocate and initialize internal port Control structure. -* 2) Create RX and TX descriptor rings for default RX and TX queues -* 3) Disable RX and TX operations, clear cause registers and -* mask all interrupts. -* 4) Set all registers to default values and clean all MAC tables. -* -* INPUT: -* int portNo - Ethernet port number -* ETH_PORT_INIT *pEthPortInit - Ethernet port init structure -* -* RETURN: -* void* - ethernet port handler, that should be passed to the most other -* functions dealing with this port. -* -* NOTE: This function is called once per port when loading the eth module. -*******************************************************************************/ -void* mvEthPortInit(int portNo, MV_ETH_PORT_INIT *pEthPortInit) -{ - int queue, descSize; - ETH_PORT_CTRL* pPortCtrl; - - /* Check validity of parameters */ - if( (portNo >= (int)mvCtrlEthMaxPortGet()) || - (pEthPortInit->rxDefQ >= MV_ETH_RX_Q_NUM) || - (pEthPortInit->maxRxPktSize < 1518) ) - { - mvOsPrintf("EthPort #%d: Bad initialization parameters\n", portNo); - return NULL; - } - if( (pEthPortInit->rxDescrNum[pEthPortInit->rxDefQ]) == 0) - { - mvOsPrintf("EthPort #%d: rxDefQ (%d) must be created\n", - portNo, pEthPortInit->rxDefQ); - return NULL; - } - - pPortCtrl = (ETH_PORT_CTRL*)mvOsMalloc( sizeof(ETH_PORT_CTRL) ); - if(pPortCtrl == NULL) - { - mvOsPrintf("EthDrv: Can't allocate %dB for port #%d control structure!\n", - (int)sizeof(ETH_PORT_CTRL), portNo); - return NULL; - } - - memset(pPortCtrl, 0, sizeof(ETH_PORT_CTRL) ); - ethPortCtrl[portNo] = pPortCtrl; - - pPortCtrl->portState = MV_UNDEFINED_STATE; - - pPortCtrl->portNo = portNo; - - pPortCtrl->osHandle = pEthPortInit->osHandle; - - /* Copy Configuration parameters */ - pPortCtrl->portConfig.maxRxPktSize = pEthPortInit->maxRxPktSize; - pPortCtrl->portConfig.rxDefQ = pEthPortInit->rxDefQ; - pPortCtrl->portConfig.ejpMode = 0; - - for( queue=0; queuerxQueueConfig[queue].descrNum = pEthPortInit->rxDescrNum[queue]; - } - for( queue=0; queuetxQueueConfig[queue].descrNum = pEthPortInit->txDescrNum[queue]; - } - - mvEthPortDisable(pPortCtrl); - - /* Set the board information regarding PHY address */ - mvEthPhyAddrSet(pPortCtrl, mvBoardPhyAddrGet(portNo) ); - - /* Create all requested RX queues */ - for(queue=0; queuerxQueueConfig[queue].descrNum == 0) - continue; - - /* Allocate memory for RX descriptors */ - descSize = ((pPortCtrl->rxQueueConfig[queue].descrNum * ETH_RX_DESC_ALIGNED_SIZE) + - CPU_D_CACHE_LINE_SIZE); - - pPortCtrl->rxQueue[queue].descBuf.bufVirtPtr = - ethAllocDescrMemory(pPortCtrl, descSize, - &pPortCtrl->rxQueue[queue].descBuf.bufPhysAddr, - &pPortCtrl->rxQueue[queue].descBuf.memHandle); - pPortCtrl->rxQueue[queue].descBuf.bufSize = descSize; - if(pPortCtrl->rxQueue[queue].descBuf.bufVirtPtr == NULL) - { - mvOsPrintf("EthPort #%d, rxQ=%d: Can't allocate %d bytes in %s for %d RX descr\n", - pPortCtrl->portNo, queue, descSize, - ethDescInSram ? "SRAM" : "DRAM", - pPortCtrl->rxQueueConfig[queue].descrNum); - return NULL; - } - - ethInitRxDescRing(pPortCtrl, queue); - } - /* Create TX queues */ - for(queue=0; queuetxQueueConfig[queue].descrNum == 0) - continue; - - /* Allocate memory for TX descriptors */ - descSize = ((pPortCtrl->txQueueConfig[queue].descrNum * ETH_TX_DESC_ALIGNED_SIZE) + - CPU_D_CACHE_LINE_SIZE); - - pPortCtrl->txQueue[queue].descBuf.bufVirtPtr = - ethAllocDescrMemory(pPortCtrl, descSize, - &pPortCtrl->txQueue[queue].descBuf.bufPhysAddr, - &pPortCtrl->txQueue[queue].descBuf.memHandle); - pPortCtrl->txQueue[queue].descBuf.bufSize = descSize; - if(pPortCtrl->txQueue[queue].descBuf.bufVirtPtr == NULL) - { - mvOsPrintf("EthPort #%d, txQ=%d: Can't allocate %d bytes in %s for %d TX descr\n", - pPortCtrl->portNo, queue, descSize, ethDescInSram ? "SRAM" : "DRAM", - pPortCtrl->txQueueConfig[queue].descrNum); - return NULL; - } - - ethInitTxDescRing(pPortCtrl, queue); - } - mvEthDefaultsSet(pPortCtrl); - - pPortCtrl->portState = MV_IDLE; - return pPortCtrl; -} - -/******************************************************************************* -* ethPortFinish - Finish the Ethernet port driver -* -* DESCRIPTION: -* This function finish the ethernet port. -* 1) Down ethernet port if needed. -* 2) Delete RX and TX descriptor rings for all created RX and TX queues -* 3) Free internal port Control structure. -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler -* -* RETURN: NONE. -* -*******************************************************************************/ -void mvEthPortFinish(void* pPortHndl) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - int queue, portNo = pPortCtrl->portNo; - - if(pPortCtrl->portState == MV_ACTIVE) - { - mvOsPrintf("ethPort #%d: Warning !!! Finish port in Active state\n", - portNo); - mvEthPortDisable(pPortHndl); - } - - /* Free all allocated RX queues */ - for(queue=0; queuerxQueue[queue].descBuf); - } - - /* Free all allocated TX queues */ - for(queue=0; queuetxQueue[queue].descBuf); - } - - /* Free port control structure */ - mvOsFree(pPortCtrl); - - ethPortCtrl[portNo] = NULL; -} - -/******************************************************************************* -* mvEthDefaultsSet - Set defaults to the ethernet port -* -* DESCRIPTION: -* This function set default values to the ethernet port. -* 1) Clear Cause registers and Mask all interrupts -* 2) Clear all MAC tables -* 3) Set defaults to all registers -* 4) Reset all created RX and TX descriptors ring -* 5) Reset PHY -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler -* -* RETURN: MV_STATUS -* MV_OK - Success, Others - Failure -* NOTE: -* This function update all the port configuration except those set -* Initialy by the OsGlue by MV_ETH_PORT_INIT. -* This function can be called after portDown to return the port setting -* to defaults. -*******************************************************************************/ -MV_STATUS mvEthDefaultsSet(void* pPortHndl) -{ - int ethPortNo, queue; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - MV_U32 txPrio; - MV_U32 portCfgReg, portCfgExtReg, portSerialCtrlReg, portSerialCtrl1Reg, portSdmaCfgReg; - MV_BOARD_MAC_SPEED boardMacCfg; - - ethPortNo = pPortCtrl->portNo; - - /* Clear Cause registers */ - MV_REG_WRITE(ETH_INTR_CAUSE_REG(ethPortNo),0); - MV_REG_WRITE(ETH_INTR_CAUSE_EXT_REG(ethPortNo),0); - - /* Mask all interrupts */ - MV_REG_WRITE(ETH_INTR_MASK_REG(ethPortNo),0); - MV_REG_WRITE(ETH_INTR_MASK_EXT_REG(ethPortNo),0); - - portCfgReg = PORT_CONFIG_VALUE; - portCfgExtReg = PORT_CONFIG_EXTEND_VALUE; - - boardMacCfg = mvBoardMacSpeedGet(ethPortNo); - - if(boardMacCfg == BOARD_MAC_SPEED_100M) - { - portSerialCtrlReg = PORT_SERIAL_CONTROL_100MB_FORCE_VALUE; - } - else if(boardMacCfg == BOARD_MAC_SPEED_1000M) - { - portSerialCtrlReg = PORT_SERIAL_CONTROL_1000MB_FORCE_VALUE; - } - else - { - portSerialCtrlReg = PORT_SERIAL_CONTROL_VALUE; - } - - /* build PORT_SDMA_CONFIG_REG */ - portSdmaCfgReg = ETH_TX_INTR_COAL_MASK(0); - portSdmaCfgReg |= ETH_TX_BURST_SIZE_MASK(ETH_BURST_SIZE_16_64BIT_VALUE); - -#if ( (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WB) || \ - (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WT) ) - /* some devices have restricted RX burst size when using HW coherency */ - portSdmaCfgReg |= ETH_RX_BURST_SIZE_MASK(ETH_BURST_SIZE_4_64BIT_VALUE); -#else - portSdmaCfgReg |= ETH_RX_BURST_SIZE_MASK(ETH_BURST_SIZE_16_64BIT_VALUE); -#endif - -#if defined(MV_CPU_BE) - /* big endian */ -# if defined(MV_ARM) - portSdmaCfgReg |= (ETH_RX_NO_DATA_SWAP_MASK | - ETH_TX_NO_DATA_SWAP_MASK | - ETH_DESC_SWAP_MASK); -# elif defined(MV_PPC) - portSdmaCfgReg |= (ETH_RX_DATA_SWAP_MASK | - ETH_TX_DATA_SWAP_MASK | - ETH_NO_DESC_SWAP_MASK); -# else -# error "Giga Ethernet Swap policy is not defined for the CPU_ARCH" -# endif /* MV_ARM / MV_PPC */ - -#else /* MV_CPU_LE */ - /* little endian */ - portSdmaCfgReg |= (ETH_RX_NO_DATA_SWAP_MASK | - ETH_TX_NO_DATA_SWAP_MASK | - ETH_NO_DESC_SWAP_MASK); -#endif /* MV_CPU_BE / MV_CPU_LE */ - - pPortCtrl->portRxQueueCmdReg = 0; - pPortCtrl->portTxQueueCmdReg = 0; - -#if (MV_ETH_VERSION >= 4) - if(pPortCtrl->portConfig.ejpMode == MV_TRUE) - { - MV_REG_WRITE(ETH_TXQ_CMD_1_REG(ethPortNo), ETH_TX_EJP_ENABLE_MASK); - } - else - { - MV_REG_WRITE(ETH_TXQ_CMD_1_REG(ethPortNo), 0) - } -#endif /* (MV_ETH_VERSION >= 4) */ - - ethSetUcastTable(ethPortNo, -1); - mvEthSetSpecialMcastTable(ethPortNo, -1); - mvEthSetOtherMcastTable(ethPortNo, -1); - - portSerialCtrlReg &= ~ETH_MAX_RX_PACKET_SIZE_MASK; - - portSerialCtrlReg |= mvEthMruGet(pPortCtrl->portConfig.maxRxPktSize); - - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNo), portSerialCtrlReg); - - /* Update value of PortConfig register accordingly with all RxQueue types */ - pPortCtrl->portConfig.rxArpQ = pPortCtrl->portConfig.rxDefQ; - pPortCtrl->portConfig.rxBpduQ = pPortCtrl->portConfig.rxDefQ; - pPortCtrl->portConfig.rxTcpQ = pPortCtrl->portConfig.rxDefQ; - pPortCtrl->portConfig.rxUdpQ = pPortCtrl->portConfig.rxDefQ; - - portCfgReg &= ~ETH_DEF_RX_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_QUEUE_MASK(pPortCtrl->portConfig.rxDefQ); - - portCfgReg &= ~ETH_DEF_RX_ARP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_ARP_QUEUE_MASK(pPortCtrl->portConfig.rxArpQ); - - portCfgReg &= ~ETH_DEF_RX_BPDU_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_BPDU_QUEUE_MASK(pPortCtrl->portConfig.rxBpduQ); - - portCfgReg &= ~ETH_DEF_RX_TCP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_TCP_QUEUE_MASK(pPortCtrl->portConfig.rxTcpQ); - - portCfgReg &= ~ETH_DEF_RX_UDP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_UDP_QUEUE_MASK(pPortCtrl->portConfig.rxUdpQ); - - /* Assignment of Tx CTRP of given queue */ - txPrio = 0; - - for(queue=0; queuetxQueue[queue]; - - if(pQueueCtrl->pFirstDescr != NULL) - { - ethResetTxDescRing(pPortCtrl, queue); - - MV_REG_WRITE(ETH_TXQ_TOKEN_COUNT_REG(ethPortNo, queue), - 0x3fffffff); - MV_REG_WRITE(ETH_TXQ_TOKEN_CFG_REG(ethPortNo, queue), - 0x03ffffff); - } - else - { - MV_REG_WRITE(ETH_TXQ_TOKEN_COUNT_REG(ethPortNo, queue), 0x0); - MV_REG_WRITE(ETH_TXQ_TOKEN_CFG_REG(ethPortNo, queue), 0x0); - } - } - - /* Assignment of Rx CRDP of given queue */ - for(queue=0; queueportNo; - - if( (pPortCtrl->portState != MV_ACTIVE) && - (pPortCtrl->portState != MV_PAUSED) ) - { - mvOsPrintf("ethDrv port%d: Unexpected port state %d\n", - ethPortNo, pPortCtrl->portState); - return MV_BAD_STATE; - } - - ethPortNo = pPortCtrl->portNo; - - /* Enable port RX. */ - MV_REG_WRITE(ETH_RX_QUEUE_COMMAND_REG(ethPortNo), pPortCtrl->portRxQueueCmdReg); - - /* Enable port TX. */ - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(ethPortNo)) = pPortCtrl->portTxQueueCmdReg; - - pPortCtrl->portState = MV_ACTIVE; - - return MV_OK; -} - -/******************************************************************************* -* ethPortDown - Stop the Ethernet port activity. -* -* DESCRIPTION: -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler -* -* RETURN: MV_STATUS -* MV_OK - Success, Others - Failure. -* -* NOTE : used for port link down. -*******************************************************************************/ -MV_STATUS mvEthPortDown(void* pEthPortHndl) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - int ethPortNum = pPortCtrl->portNo; - unsigned int regData; - volatile int uDelay, mDelay; - - /* Stop Rx port activity. Check port Rx activity. */ - regData = (MV_REG_READ(ETH_RX_QUEUE_COMMAND_REG(ethPortNum))) & ETH_RXQ_ENABLE_MASK; - if(regData != 0) - { - /* Issue stop command for active channels only */ - MV_REG_WRITE(ETH_RX_QUEUE_COMMAND_REG(ethPortNum), (regData << ETH_RXQ_DISABLE_OFFSET)); - } - - /* Stop Tx port activity. Check port Tx activity. */ - regData = (MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(ethPortNum))) & ETH_TXQ_ENABLE_MASK; - if(regData != 0) - { - /* Issue stop command for active channels only */ - MV_REG_WRITE(ETH_TX_QUEUE_COMMAND_REG(ethPortNum), - (regData << ETH_TXQ_DISABLE_OFFSET) ); - } - - /* Force link down */ -/* - regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum)); - regData &= ~(ETH_DO_NOT_FORCE_LINK_FAIL_MASK); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData); -*/ - /* Wait for all Rx activity to terminate. */ - mDelay = 0; - do - { - if(mDelay >= RX_DISABLE_TIMEOUT_MSEC) - { - mvOsPrintf("ethPort_%d: TIMEOUT for RX stopped !!! rxQueueCmd - 0x08%x\n", - ethPortNum, regData); - break; - } - mvOsDelay(1); - mDelay++; - - /* Check port RX Command register that all Rx queues are stopped */ - regData = MV_REG_READ(ETH_RX_QUEUE_COMMAND_REG(ethPortNum)); - } - while(regData & 0xFF); - - /* Wait for all Tx activity to terminate. */ - mDelay = 0; - do - { - if(mDelay >= TX_DISABLE_TIMEOUT_MSEC) - { - mvOsPrintf("ethPort_%d: TIMEOUT for TX stoped !!! txQueueCmd - 0x08%x\n", - ethPortNum, regData); - break; - } - mvOsDelay(1); - mDelay++; - - /* Check port TX Command register that all Tx queues are stopped */ - regData = MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(ethPortNum)); - } - while(regData & 0xFF); - - /* Double check to Verify that TX FIFO is Empty */ - mDelay = 0; - while(MV_TRUE) - { - do - { - if(mDelay >= TX_FIFO_EMPTY_TIMEOUT_MSEC) - { - mvOsPrintf("\n ethPort_%d: TIMEOUT for TX FIFO empty !!! portStatus - 0x08%x\n", - ethPortNum, regData); - break; - } - mvOsDelay(1); - mDelay++; - - regData = MV_REG_READ(ETH_PORT_STATUS_REG(ethPortNum)); - } - while( ((regData & ETH_TX_FIFO_EMPTY_MASK) == 0) || - ((regData & ETH_TX_IN_PROGRESS_MASK) != 0) ); - - if(mDelay >= TX_FIFO_EMPTY_TIMEOUT_MSEC) - break; - - /* Double check */ - regData = MV_REG_READ(ETH_PORT_STATUS_REG(ethPortNum)); - if( ((regData & ETH_TX_FIFO_EMPTY_MASK) != 0) && - ((regData & ETH_TX_IN_PROGRESS_MASK) == 0) ) - { - break; - } - else - mvOsPrintf("ethPort_%d: TX FIFO Empty double check failed. %d msec, portStatus=0x%x\n", - ethPortNum, mDelay, regData); - } - - /* Do NOT force link down */ -/* - regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum)); - regData |= (ETH_DO_NOT_FORCE_LINK_FAIL_MASK); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData); -*/ - /* Wait about 2500 tclk cycles */ - uDelay = (PORT_DISABLE_WAIT_TCLOCKS/(mvBoardTclkGet()/1000000)); - mvOsUDelay(uDelay); - - pPortCtrl->portState = MV_PAUSED; - - return MV_OK; -} - - -/******************************************************************************* -* ethPortEnable - Enable the Ethernet port and Start RX and TX. -* -* DESCRIPTION: -* This routine enable the Ethernet port and Rx and Tx activity: -* -* Note: Each Rx and Tx queue descriptor's list must be initialized prior -* to calling this function (use etherInitTxDescRing for Tx queues and -* etherInitRxDescRing for Rx queues). -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler -* -* RETURN: MV_STATUS -* MV_OK - Success, Others - Failure. -* -* NOTE: main usage is to enable the port after ifconfig up. -*******************************************************************************/ -MV_STATUS mvEthPortEnable(void* pEthPortHndl) -{ - int ethPortNo; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - MV_U32 portSerialCtrlReg; - - ethPortNo = pPortCtrl->portNo; - - /* Enable port */ - portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNo)); - portSerialCtrlReg |= (ETH_DO_NOT_FORCE_LINK_FAIL_MASK | ETH_PORT_ENABLE_MASK); - - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNo), portSerialCtrlReg); - - mvEthMibCountersClear(pEthPortHndl); - - pPortCtrl->portState = MV_PAUSED; - - /* If Link is UP, Start RX and TX traffic */ - if( MV_REG_READ( ETH_PORT_STATUS_REG(ethPortNo) ) & ETH_LINK_UP_MASK) - return( mvEthPortUp(pEthPortHndl) ); - - return MV_NOT_READY; -} - - -/******************************************************************************* -* mvEthPortDisable - Stop RX and TX activities and Disable the Ethernet port. -* -* DESCRIPTION: -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler -* -* RETURN: MV_STATUS -* MV_OK - Success, Others - Failure. -* -* NOTE: main usage is to disable the port after ifconfig down. -*******************************************************************************/ -MV_STATUS mvEthPortDisable(void* pEthPortHndl) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - int ethPortNum = pPortCtrl->portNo; - unsigned int regData; - volatile int mvDelay; - - if(pPortCtrl->portState == MV_ACTIVE) - { - /* Stop RX and TX activities */ - mvEthPortDown(pEthPortHndl); - } - - /* Reset the Enable bit in the Serial Control Register */ - regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum)); - regData &= ~(ETH_PORT_ENABLE_MASK); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData); - - /* Wait about 2500 tclk cycles */ - mvDelay = (PORT_DISABLE_WAIT_TCLOCKS*(mvCpuPclkGet()/mvBoardTclkGet())); - for(mvDelay; mvDelay>0; mvDelay--); - - pPortCtrl->portState = MV_IDLE; - return MV_OK; -} - -/******************************************************************************* -* mvEthPortForceTxDone - Get next buffer from TX queue in spite of buffer ownership. -* -* DESCRIPTION: -* This routine used to free buffers attached to the Tx ring and should -* be called only when Giga Ethernet port is Down -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int txQueue - Number of TX queue. -* -* OUTPUT: -* MV_PKT_INFO *pPktInfo - Pointer to packet was sent. -* -* RETURN: -* MV_EMPTY - There is no more buffers in this queue. -* MV_OK - Buffer detached from the queue and pPktInfo structure -* filled with relevant information. -* -*******************************************************************************/ -MV_PKT_INFO* mvEthPortForceTxDone(void* pEthPortHndl, int txQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - MV_PKT_INFO* pPktInfo; - ETH_TX_DESC* pTxDesc; - int port = pPortCtrl->portNo; - - pQueueCtrl = &pPortCtrl->txQueue[txQueue]; - - while( (pQueueCtrl->pUsedDescr != pQueueCtrl->pCurrentDescr) || - (pQueueCtrl->resource == 0) ) - { - /* Free next descriptor */ - pQueueCtrl->resource++; - pTxDesc = (ETH_TX_DESC*)pQueueCtrl->pUsedDescr; - - /* pPktInfo is available only in descriptors which are last descriptors */ - pPktInfo = (MV_PKT_INFO*)pTxDesc->returnInfo; - if (pPktInfo) - pPktInfo->status = pTxDesc->cmdSts; - - pTxDesc->cmdSts = 0x0; - pTxDesc->returnInfo = 0x0; - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxDesc); - - pQueueCtrl->pUsedDescr = TX_NEXT_DESC_PTR(pTxDesc, pQueueCtrl); - - if (pPktInfo) - if (pPktInfo->status & ETH_TX_LAST_DESC_MASK) - return pPktInfo; - } - MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(port, txQueue), - (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); - return NULL; -} - - - -/******************************************************************************* -* mvEthPortForceRx - Get next buffer from RX queue in spite of buffer ownership. -* -* DESCRIPTION: -* This routine used to free buffers attached to the Rx ring and should -* be called only when Giga Ethernet port is Down -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int rxQueue - Number of Rx queue. -* -* OUTPUT: -* MV_PKT_INFO *pPktInfo - Pointer to received packet. -* -* RETURN: -* MV_EMPTY - There is no more buffers in this queue. -* MV_OK - Buffer detached from the queue and pBufInfo structure -* filled with relevant information. -* -*******************************************************************************/ -MV_PKT_INFO* mvEthPortForceRx(void* pEthPortHndl, int rxQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - ETH_RX_DESC* pRxDesc; - MV_PKT_INFO* pPktInfo; - int port = pPortCtrl->portNo; - - pQueueCtrl = &pPortCtrl->rxQueue[rxQueue]; - - if(pQueueCtrl->resource == 0) - { - MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(port, rxQueue), - (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); - - return NULL; - } - /* Free next descriptor */ - pQueueCtrl->resource--; - pRxDesc = (ETH_RX_DESC*)pQueueCtrl->pCurrentDescr; - pPktInfo = (MV_PKT_INFO*)pRxDesc->returnInfo; - - pPktInfo->status = pRxDesc->cmdSts; - pRxDesc->cmdSts = 0x0; - pRxDesc->returnInfo = 0x0; - ETH_DESCR_FLUSH_INV(pPortCtrl, pRxDesc); - - pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxDesc, pQueueCtrl); - return pPktInfo; -} - - -/******************************************************************************/ -/* Port Configuration functions */ -/******************************************************************************/ -/******************************************************************************* -* mvEthMruGet - Get MRU configuration for Max Rx packet size. -* -* INPUT: -* MV_U32 maxRxPktSize - max packet size. -* -* RETURN: MV_U32 - MRU configuration. -* -*******************************************************************************/ -static MV_U32 mvEthMruGet(MV_U32 maxRxPktSize) -{ - MV_U32 portSerialCtrlReg = 0; - - if(maxRxPktSize > 9192) - portSerialCtrlReg |= ETH_MAX_RX_PACKET_9700BYTE; - else if(maxRxPktSize > 9022) - portSerialCtrlReg |= ETH_MAX_RX_PACKET_9192BYTE; - else if(maxRxPktSize > 1552) - portSerialCtrlReg |= ETH_MAX_RX_PACKET_9022BYTE; - else if(maxRxPktSize > 1522) - portSerialCtrlReg |= ETH_MAX_RX_PACKET_1552BYTE; - else if(maxRxPktSize > 1518) - portSerialCtrlReg |= ETH_MAX_RX_PACKET_1522BYTE; - else - portSerialCtrlReg |= ETH_MAX_RX_PACKET_1518BYTE; - - return portSerialCtrlReg; -} - -/******************************************************************************* -* mvEthRxCoalSet - Sets coalescing interrupt mechanism on RX path -* -* DESCRIPTION: -* This routine sets the RX coalescing interrupt mechanism parameter. -* This parameter is a timeout counter, that counts in 64 tClk -* chunks, that when timeout event occurs a maskable interrupt occurs. -* The parameter is calculated using the tCLK frequency of the -* MV-64xxx chip, and the required number is in micro seconds. -* -* INPUT: -* void* pPortHndl - Ethernet Port handler. -* MV_U32 uSec - Number of micro seconds between -* RX interrupts -* -* RETURN: -* None. -* -* COMMENT: -* 1 sec - TCLK_RATE clocks -* 1 uSec - TCLK_RATE / 1,000,000 clocks -* -* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64) -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_U32 mvEthRxCoalSet (void* pPortHndl, MV_U32 uSec) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - MV_U32 coal = ((uSec * (mvBoardTclkGet() / 1000000)) / 64); - MV_U32 portSdmaCfgReg; - - portSdmaCfgReg = MV_REG_READ(ETH_SDMA_CONFIG_REG(pPortCtrl->portNo)); - portSdmaCfgReg &= ~ETH_RX_INTR_COAL_ALL_MASK; - - portSdmaCfgReg |= ETH_RX_INTR_COAL_MASK(coal); - -#if (MV_ETH_VERSION >= 2) - /* Set additional bit if needed ETH_RX_INTR_COAL_MSB_BIT (25) */ - if(ETH_RX_INTR_COAL_MASK(coal) > ETH_RX_INTR_COAL_ALL_MASK) - portSdmaCfgReg |= ETH_RX_INTR_COAL_MSB_MASK; -#endif /* MV_ETH_VERSION >= 2 */ - - MV_REG_WRITE (ETH_SDMA_CONFIG_REG(pPortCtrl->portNo), portSdmaCfgReg); - return coal; -} - -/******************************************************************************* -* mvEthTxCoalSet - Sets coalescing interrupt mechanism on TX path -* -* DESCRIPTION: -* This routine sets the TX coalescing interrupt mechanism parameter. -* This parameter is a timeout counter, that counts in 64 tClk -* chunks, that when timeout event occurs a maskable interrupt -* occurs. -* The parameter is calculated using the tCLK frequency of the -* MV-64xxx chip, and the required number is in micro seconds. -* -* INPUT: -* void* pPortHndl - Ethernet Port handler. -* MV_U32 uSec - Number of micro seconds between -* RX interrupts -* -* RETURN: -* None. -* -* COMMENT: -* 1 sec - TCLK_RATE clocks -* 1 uSec - TCLK_RATE / 1,000,000 clocks -* -* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64) -* -*******************************************************************************/ -MV_U32 mvEthTxCoalSet(void* pPortHndl, MV_U32 uSec) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - MV_U32 coal = ((uSec * (mvBoardTclkGet() / 1000000)) / 64); - MV_U32 regVal; - - regVal = MV_REG_READ(ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo)); - regVal &= ~ETH_TX_INTR_COAL_ALL_MASK; - regVal |= ETH_TX_INTR_COAL_MASK(coal); - - /* Set TX Coalescing mechanism */ - MV_REG_WRITE (ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo), regVal); - return coal; -} - -/******************************************************************************* -* mvEthCoalGet - Gets RX and TX coalescing values in micro seconds -* -* DESCRIPTION: -* This routine gets the RX and TX coalescing interrupt values. -* The parameter is calculated using the tCLK frequency of the -* MV-64xxx chip, and the returned numbers are in micro seconds. -* -* INPUTs: -* void* pPortHndl - Ethernet Port handler. -* -* OUTPUTs: -* MV_U32* pRxCoal - Number of micro seconds between RX interrupts -* MV_U32* pTxCoal - Number of micro seconds between TX interrupts -* -* RETURN: -* MV_STATUS MV_OK - success -* Others - failure. -* -* COMMENT: -* 1 sec - TCLK_RATE clocks -* 1 uSec - TCLK_RATE / 1,000,000 clocks -* -* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64) -* -*******************************************************************************/ -MV_STATUS mvEthCoalGet(void* pPortHndl, MV_U32* pRxCoal, MV_U32* pTxCoal) -{ - MV_U32 regVal, coal, usec; - - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - /* get TX Coalescing */ - regVal = MV_REG_READ (ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo)); - coal = ((regVal & ETH_TX_INTR_COAL_ALL_MASK) >> ETH_TX_INTR_COAL_OFFSET); - - usec = (coal * 64) / (mvBoardTclkGet() / 1000000); - if(pTxCoal != NULL) - *pTxCoal = usec; - - /* Get RX Coalescing */ - regVal = MV_REG_READ(ETH_SDMA_CONFIG_REG(pPortCtrl->portNo)); - coal = ((regVal & ETH_RX_INTR_COAL_ALL_MASK) >> ETH_RX_INTR_COAL_OFFSET); - -#if (MV_ETH_VERSION >= 2) - if(regVal & ETH_RX_INTR_COAL_MSB_MASK) - { - /* Add MSB */ - coal |= (ETH_RX_INTR_COAL_ALL_MASK + 1); - } -#endif /* MV_ETH_VERSION >= 2 */ - - usec = (coal * 64) / (mvBoardTclkGet() / 1000000); - if(pRxCoal != NULL) - *pRxCoal = usec; - - return MV_OK; -} - -/******************************************************************************* -* mvEthMaxRxSizeSet - -* -* DESCRIPTION: -* Change maximum receive size of the port. This configuration will take place -* after next call of ethPortSetDefaults() function. -* -* INPUT: -* -* RETURN: -*******************************************************************************/ -MV_STATUS mvEthMaxRxSizeSet(void* pPortHndl, int maxRxSize) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - MV_U32 portSerialCtrlReg; - - if((maxRxSize < 1518) || (maxRxSize & ~ETH_RX_BUFFER_MASK)) - return MV_BAD_PARAM; - - pPortCtrl->portConfig.maxRxPktSize = maxRxSize; - - portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(pPortCtrl->portNo)); - portSerialCtrlReg &= ~ETH_MAX_RX_PACKET_SIZE_MASK; - portSerialCtrlReg |= mvEthMruGet(pPortCtrl->portConfig.maxRxPktSize); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(pPortCtrl->portNo), portSerialCtrlReg); - - return MV_OK; -} - - -/******************************************************************************/ -/* MAC Filtering functions */ -/******************************************************************************/ - -/******************************************************************************* -* mvEthRxFilterModeSet - Configure Fitering mode of Ethernet port -* -* DESCRIPTION: -* This routine used to free buffers attached to the Rx ring and should -* be called only when Giga Ethernet port is Down -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* MV_BOOL isPromisc - Promiscous mode -* MV_TRUE - accept all Broadcast, Multicast -* and Unicast packets -* MV_FALSE - accept all Broadcast, -* specially added Multicast and -* single Unicast packets -* -* RETURN: MV_STATUS MV_OK - Success, Other - Failure -* -*******************************************************************************/ -MV_STATUS mvEthRxFilterModeSet(void* pEthPortHndl, MV_BOOL isPromisc) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - int queue; - MV_U32 portCfgReg; - - portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); - /* Set / Clear UPM bit in port configuration register */ - if(isPromisc) - { - /* Accept all multicast packets to RX default queue */ - queue = pPortCtrl->portConfig.rxDefQ; - portCfgReg |= ETH_UNICAST_PROMISCUOUS_MODE_MASK; - memset(pPortCtrl->mcastCount, 1, sizeof(pPortCtrl->mcastCount)); - MV_REG_WRITE(ETH_MAC_ADDR_LOW_REG(pPortCtrl->portNo),0xFFFF); - MV_REG_WRITE(ETH_MAC_ADDR_HIGH_REG(pPortCtrl->portNo),0xFFFFFFFF); - } - else - { - /* Reject all Multicast addresses */ - queue = -1; - portCfgReg &= ~ETH_UNICAST_PROMISCUOUS_MODE_MASK; - /* Clear all mcastCount */ - memset(pPortCtrl->mcastCount, 0, sizeof(pPortCtrl->mcastCount)); - } - MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); - - /* Set Special Multicast and Other Multicast tables */ - mvEthSetSpecialMcastTable(pPortCtrl->portNo, queue); - mvEthSetOtherMcastTable(pPortCtrl->portNo, queue); - ethSetUcastTable(pPortCtrl->portNo, queue); - - return MV_OK; -} - -/******************************************************************************* -* mvEthMacAddrSet - This function Set the port Unicast address. -* -* DESCRIPTION: -* This function Set the port Ethernet MAC address. This address -* will be used to send Pause frames if enabled. Packets with this -* address will be accepted and dispatched to default RX queue -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler. -* char* pAddr - Address to be set -* -* RETURN: MV_STATUS -* MV_OK - Success, Other - Faulure -* -*******************************************************************************/ -MV_STATUS mvEthMacAddrSet(void* pPortHndl, unsigned char *pAddr, int queue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - unsigned int macH; - unsigned int macL; - - if(queue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", queue); - return MV_BAD_PARAM; - } - - if(queue != -1) - { - macL = (pAddr[4] << 8) | (pAddr[5]); - macH = (pAddr[0] << 24)| (pAddr[1] << 16) | - (pAddr[2] << 8) | (pAddr[3] << 0); - - MV_REG_WRITE(ETH_MAC_ADDR_LOW_REG(pPortCtrl->portNo), macL); - MV_REG_WRITE(ETH_MAC_ADDR_HIGH_REG(pPortCtrl->portNo), macH); - } - - /* Accept frames of this address */ - ethSetUcastAddr(pPortCtrl->portNo, pAddr[5], queue); - - return MV_OK; -} - -/******************************************************************************* -* mvEthMacAddrGet - This function returns the port Unicast address. -* -* DESCRIPTION: -* This function returns the port Ethernet MAC address. -* -* INPUT: -* int portNo - Ethernet port number. -* char* pAddr - Pointer where address will be written to -* -* RETURN: MV_STATUS -* MV_OK - Success, Other - Faulure -* -*******************************************************************************/ -MV_STATUS mvEthMacAddrGet(int portNo, unsigned char *pAddr) -{ - unsigned int macH; - unsigned int macL; - - if(pAddr == NULL) - { - mvOsPrintf("mvEthMacAddrGet: NULL pointer.\n"); - return MV_BAD_PARAM; - } - - macH = MV_REG_READ(ETH_MAC_ADDR_HIGH_REG(portNo)); - macL = MV_REG_READ(ETH_MAC_ADDR_LOW_REG(portNo)); - pAddr[0] = (macH >> 24) & 0xff; - pAddr[1] = (macH >> 16) & 0xff; - pAddr[2] = (macH >> 8) & 0xff; - pAddr[3] = macH & 0xff; - pAddr[4] = (macL >> 8) & 0xff; - pAddr[5] = macL & 0xff; - - return MV_OK; -} - -/******************************************************************************* -* mvEthMcastCrc8Get - Calculate CRC8 of MAC address. -* -* DESCRIPTION: -* -* INPUT: -* MV_U8* pAddr - Address to calculate CRC-8 -* -* RETURN: MV_U8 - CRC-8 of this MAC address -* -*******************************************************************************/ -MV_U8 mvEthMcastCrc8Get(MV_U8* pAddr) -{ - unsigned int macH; - unsigned int macL; - int macArray[48]; - int crc[8]; - int i; - unsigned char crcResult = 0; - - /* Calculate CRC-8 out of the given address */ - macH = (pAddr[0] << 8) | (pAddr[1]); - macL = (pAddr[2] << 24)| (pAddr[3] << 16) | - (pAddr[4] << 8) | (pAddr[5] << 0); - - for(i=0; i<32; i++) - macArray[i] = (macL >> i) & 0x1; - - for(i=32; i<48; i++) - macArray[i] = (macH >> (i - 32)) & 0x1; - - crc[0] = macArray[45] ^ macArray[43] ^ macArray[40] ^ macArray[39] ^ - macArray[35] ^ macArray[34] ^ macArray[31] ^ macArray[30] ^ - macArray[28] ^ macArray[23] ^ macArray[21] ^ macArray[19] ^ - macArray[18] ^ macArray[16] ^ macArray[14] ^ macArray[12] ^ - macArray[8] ^ macArray[7] ^ macArray[6] ^ macArray[0]; - - crc[1] = macArray[46] ^ macArray[45] ^ macArray[44] ^ macArray[43] ^ - macArray[41] ^ macArray[39] ^ macArray[36] ^ macArray[34] ^ - macArray[32] ^ macArray[30] ^ macArray[29] ^ macArray[28] ^ - macArray[24] ^ macArray[23] ^ macArray[22] ^ macArray[21] ^ - macArray[20] ^ macArray[18] ^ macArray[17] ^ macArray[16] ^ - macArray[15] ^ macArray[14] ^ macArray[13] ^ macArray[12] ^ - macArray[9] ^ macArray[6] ^ macArray[1] ^ macArray[0]; - - crc[2] = macArray[47] ^ macArray[46] ^ macArray[44] ^ macArray[43] ^ - macArray[42] ^ macArray[39] ^ macArray[37] ^ macArray[34] ^ - macArray[33] ^ macArray[29] ^ macArray[28] ^ macArray[25] ^ - macArray[24] ^ macArray[22] ^ macArray[17] ^ macArray[15] ^ - macArray[13] ^ macArray[12] ^ macArray[10] ^ macArray[8] ^ - macArray[6] ^ macArray[2] ^ macArray[1] ^ macArray[0]; - - crc[3] = macArray[47] ^ macArray[45] ^ macArray[44] ^ macArray[43] ^ - macArray[40] ^ macArray[38] ^ macArray[35] ^ macArray[34] ^ - macArray[30] ^ macArray[29] ^ macArray[26] ^ macArray[25] ^ - macArray[23] ^ macArray[18] ^ macArray[16] ^ macArray[14] ^ - macArray[13] ^ macArray[11] ^ macArray[9] ^ macArray[7] ^ - macArray[3] ^ macArray[2] ^ macArray[1]; - - crc[4] = macArray[46] ^ macArray[45] ^ macArray[44] ^ macArray[41] ^ - macArray[39] ^ macArray[36] ^ macArray[35] ^ macArray[31] ^ - macArray[30] ^ macArray[27] ^ macArray[26] ^ macArray[24] ^ - macArray[19] ^ macArray[17] ^ macArray[15] ^ macArray[14] ^ - macArray[12] ^ macArray[10] ^ macArray[8] ^ macArray[4] ^ - macArray[3] ^ macArray[2]; - - crc[5] = macArray[47] ^ macArray[46] ^ macArray[45] ^ macArray[42] ^ - macArray[40] ^ macArray[37] ^ macArray[36] ^ macArray[32] ^ - macArray[31] ^ macArray[28] ^ macArray[27] ^ macArray[25] ^ - macArray[20] ^ macArray[18] ^ macArray[16] ^ macArray[15] ^ - macArray[13] ^ macArray[11] ^ macArray[9] ^ macArray[5] ^ - macArray[4] ^ macArray[3]; - - crc[6] = macArray[47] ^ macArray[46] ^ macArray[43] ^ macArray[41] ^ - macArray[38] ^ macArray[37] ^ macArray[33] ^ macArray[32] ^ - macArray[29] ^ macArray[28] ^ macArray[26] ^ macArray[21] ^ - macArray[19] ^ macArray[17] ^ macArray[16] ^ macArray[14] ^ - macArray[12] ^ macArray[10] ^ macArray[6] ^ macArray[5] ^ - macArray[4]; - - crc[7] = macArray[47] ^ macArray[44] ^ macArray[42] ^ macArray[39] ^ - macArray[38] ^ macArray[34] ^ macArray[33] ^ macArray[30] ^ - macArray[29] ^ macArray[27] ^ macArray[22] ^ macArray[20] ^ - macArray[18] ^ macArray[17] ^ macArray[15] ^ macArray[13] ^ - macArray[11] ^ macArray[7] ^ macArray[6] ^ macArray[5]; - - for(i=0; i<8; i++) - crcResult = crcResult | (crc[i] << i); - - return crcResult; -} -/******************************************************************************* -* mvEthMcastAddrSet - Multicast address settings. -* -* DESCRIPTION: -* This API controls the MV device MAC multicast support. -* The MV device supports multicast using two tables: -* 1) Special Multicast Table for MAC addresses of the form -* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0xFF). -* The MAC DA[7:0] bits are used as a pointer to the Special Multicast -* Table entries in the DA-Filter table. -* In this case, the function calls ethPortSmcAddr() routine to set the -* Special Multicast Table. -* 2) Other Multicast Table for multicast of another type. A CRC-8bit -* is used as an index to the Other Multicast Table entries in the -* DA-Filter table. -* In this case, the function calculates the CRC-8bit value and calls -* ethPortOmcAddr() routine to set the Other Multicast Table. -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler. -* MV_U8* pAddr - Address to be set -* int queue - RX queue to capture all packets with this -* Multicast MAC address. -* -1 means delete this Multicast address. -* -* RETURN: MV_STATUS -* MV_TRUE - Success, Other - Failure -* -*******************************************************************************/ -MV_STATUS mvEthMcastAddrSet(void* pPortHndl, MV_U8 *pAddr, int queue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - unsigned char crcResult = 0; - - if(queue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethPort %d: RX queue #%d is out of range\n", - pPortCtrl->portNo, queue); - return MV_BAD_PARAM; - } - - if((pAddr[0] == 0x01) && - (pAddr[1] == 0x00) && - (pAddr[2] == 0x5E) && - (pAddr[3] == 0x00) && - (pAddr[4] == 0x00)) - { - ethSetSpecialMcastAddr(pPortCtrl->portNo, pAddr[5], queue); - } - else - { - crcResult = mvEthMcastCrc8Get(pAddr); - - /* Check Add counter for this CRC value */ - if(queue == -1) - { - if(pPortCtrl->mcastCount[crcResult] == 0) - { - mvOsPrintf("ethPort #%d: No valid Mcast for crc8=0x%02x\n", - pPortCtrl->portNo, (unsigned)crcResult); - return MV_NO_SUCH; - } - - pPortCtrl->mcastCount[crcResult]--; - if(pPortCtrl->mcastCount[crcResult] != 0) - { - mvOsPrintf("ethPort #%d: After delete there are %d valid Mcast for crc8=0x%02x\n", - pPortCtrl->portNo, pPortCtrl->mcastCount[crcResult], - (unsigned)crcResult); - return MV_NO_CHANGE; - } - } - else - { - pPortCtrl->mcastCount[crcResult]++; - if(pPortCtrl->mcastCount[crcResult] > 1) - { - mvOsPrintf("ethPort #%d: Valid Mcast for crc8=0x%02x already exists\n", - pPortCtrl->portNo, (unsigned)crcResult); - return MV_NO_CHANGE; - } - } - ethSetOtherMcastAddr(pPortCtrl->portNo, crcResult, queue); - } - return MV_OK; -} - -/******************************************************************************* -* ethSetUcastTable - Unicast address settings. -* -* DESCRIPTION: -* Set all entries in the Unicast MAC Table queue==-1 means reject all -* INPUT: -* -* RETURN: -* -*******************************************************************************/ -static void ethSetUcastTable(int portNo, int queue) -{ - int offset; - MV_U32 regValue; - - if(queue == -1) - { - regValue = 0; - } - else - { - regValue = (((0x01 | (queue<<1)) << 0) | - ((0x01 | (queue<<1)) << 8) | - ((0x01 | (queue<<1)) << 16) | - ((0x01 | (queue<<1)) << 24)); - } - - for (offset=0; offset<=0xC; offset+=4) - MV_REG_WRITE((ETH_DA_FILTER_UCAST_BASE(portNo) + offset), regValue); -} - -/******************************************************************************* -* mvEthSetSpecialMcastTable - Special Multicast address settings. -* -* DESCRIPTION: -* Set all entries to the Special Multicast MAC Table. queue==-1 means reject all -* INPUT: -* -* RETURN: -* -*******************************************************************************/ -MV_VOID mvEthSetSpecialMcastTable(int portNo, int queue) -{ - int offset; - MV_U32 regValue; - - if(queue == -1) - { - regValue = 0; - } - else - { - regValue = (((0x01 | (queue<<1)) << 0) | - ((0x01 | (queue<<1)) << 8) | - ((0x01 | (queue<<1)) << 16) | - ((0x01 | (queue<<1)) << 24)); - } - - for (offset=0; offset<=0xFC; offset+=4) - { - MV_REG_WRITE((ETH_DA_FILTER_SPEC_MCAST_BASE(portNo) + - offset), regValue); - } -} - -/******************************************************************************* -* mvEthSetOtherMcastTable - Other Multicast address settings. -* -* DESCRIPTION: -* Set all entries to the Other Multicast MAC Table. queue==-1 means reject all -* INPUT: -* -* RETURN: -* -*******************************************************************************/ -MV_VOID mvEthSetOtherMcastTable(int portNo, int queue) -{ - int offset; - MV_U32 regValue; - - if(queue == -1) - { - regValue = 0; - } - else - { - regValue = (((0x01 | (queue<<1)) << 0) | - ((0x01 | (queue<<1)) << 8) | - ((0x01 | (queue<<1)) << 16) | - ((0x01 | (queue<<1)) << 24)); - } - - for (offset=0; offset<=0xFC; offset+=4) - { - MV_REG_WRITE((ETH_DA_FILTER_OTH_MCAST_BASE(portNo) + - offset), regValue); - } -} - -/******************************************************************************* -* ethSetUcastAddr - This function Set the port unicast address table -* -* DESCRIPTION: -* This function locates the proper entry in the Unicast table for the -* specified MAC nibble and sets its properties according to function -* parameters. -* -* INPUT: -* int ethPortNum - Port number. -* MV_U8 lastNibble - Unicast MAC Address last nibble. -* int queue - Rx queue number for this MAC address. -* value "-1" means remove address -* -* OUTPUT: -* This function add/removes MAC addresses from the port unicast address -* table. -* -* RETURN: -* MV_TRUE is output succeeded. -* MV_FALSE if option parameter is invalid. -* -*******************************************************************************/ -static MV_BOOL ethSetUcastAddr(int portNo, MV_U8 lastNibble, int queue) -{ - unsigned int unicastReg; - unsigned int tblOffset; - unsigned int regOffset; - - /* Locate the Unicast table entry */ - lastNibble = (0xf & lastNibble); - tblOffset = (lastNibble / 4) * 4; /* Register offset from unicast table base*/ - regOffset = lastNibble % 4; /* Entry offset within the above register */ - - - unicastReg = MV_REG_READ( (ETH_DA_FILTER_UCAST_BASE(portNo) + - tblOffset)); - - - if(queue == -1) - { - /* Clear accepts frame bit at specified unicast DA table entry */ - unicastReg &= ~(0xFF << (8*regOffset)); - } - else - { - unicastReg &= ~(0xFF << (8*regOffset)); - unicastReg |= ((0x01 | (queue<<1)) << (8*regOffset)); - } - MV_REG_WRITE( (ETH_DA_FILTER_UCAST_BASE(portNo) + tblOffset), - unicastReg); - - return MV_TRUE; -} - -/******************************************************************************* -* ethSetSpecialMcastAddr - Special Multicast address settings. -* -* DESCRIPTION: -* This routine controls the MV device special MAC multicast support. -* The Special Multicast Table for MAC addresses supports MAC of the form -* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0xFF). -* The MAC DA[7:0] bits are used as a pointer to the Special Multicast -* Table entries in the DA-Filter table. -* This function set the Special Multicast Table appropriate entry -* according to the argument given. -* -* INPUT: -* int ethPortNum Port number. -* unsigned char mcByte Multicast addr last byte (MAC DA[7:0] bits). -* int queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. -* -* OUTPUT: -* See description. -* -* RETURN: -* MV_TRUE is output succeeded. -* MV_FALSE if option parameter is invalid. -* -*******************************************************************************/ -static MV_BOOL ethSetSpecialMcastAddr(int ethPortNum, MV_U8 lastByte, int queue) -{ - unsigned int smcTableReg; - unsigned int tblOffset; - unsigned int regOffset; - - /* Locate the SMC table entry */ - tblOffset = (lastByte / 4); /* Register offset from SMC table base */ - regOffset = lastByte % 4; /* Entry offset within the above register */ - - smcTableReg = MV_REG_READ((ETH_DA_FILTER_SPEC_MCAST_BASE(ethPortNum) + tblOffset*4)); - - if(queue == -1) - { - /* Clear accepts frame bit at specified Special DA table entry */ - smcTableReg &= ~(0xFF << (8 * regOffset)); - } - else - { - smcTableReg &= ~(0xFF << (8 * regOffset)); - smcTableReg |= ((0x01 | (queue<<1)) << (8 * regOffset)); - } - MV_REG_WRITE((ETH_DA_FILTER_SPEC_MCAST_BASE(ethPortNum) + - tblOffset*4), smcTableReg); - - return MV_TRUE; -} - -/******************************************************************************* -* ethSetOtherMcastAddr - Multicast address settings. -* -* DESCRIPTION: -* This routine controls the MV device Other MAC multicast support. -* The Other Multicast Table is used for multicast of another type. -* A CRC-8bit is used as an index to the Other Multicast Table entries -* in the DA-Filter table. -* The function gets the CRC-8bit value from the calling routine and -* set the Other Multicast Table appropriate entry according to the -* CRC-8 argument given. -* -* INPUT: -* int ethPortNum Port number. -* MV_U8 crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). -* int queue Rx queue number for this MAC address. -* -* OUTPUT: -* See description. -* -* RETURN: -* MV_TRUE is output succeeded. -* MV_FALSE if option parameter is invalid. -* -*******************************************************************************/ -static MV_BOOL ethSetOtherMcastAddr(int ethPortNum, MV_U8 crc8, int queue) -{ - unsigned int omcTableReg; - unsigned int tblOffset; - unsigned int regOffset; - - /* Locate the OMC table entry */ - tblOffset = (crc8 / 4) * 4; /* Register offset from OMC table base */ - regOffset = crc8 % 4; /* Entry offset within the above register */ - - omcTableReg = MV_REG_READ( - (ETH_DA_FILTER_OTH_MCAST_BASE(ethPortNum) + tblOffset)); - - if(queue == -1) - { - /* Clear accepts frame bit at specified Other DA table entry */ - omcTableReg &= ~(0xFF << (8 * regOffset)); - } - else - { - omcTableReg &= ~(0xFF << (8 * regOffset)); - omcTableReg |= ((0x01 | (queue<<1)) << (8 * regOffset)); - } - - MV_REG_WRITE((ETH_DA_FILTER_OTH_MCAST_BASE(ethPortNum) + tblOffset), - omcTableReg); - - return MV_TRUE; -} - - -/******************************************************************************/ -/* MIB Counters functions */ -/******************************************************************************/ - - -/******************************************************************************* -* mvEthMibCounterRead - Read a MIB counter -* -* DESCRIPTION: -* This function reads a MIB counter of a specific ethernet port. -* NOTE - Read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW or -* ETH_MIB_GOOD_OCTETS_SENT_LOW counters will return 64 bits value, -* so pHigh32 pointer should not be NULL in this case. -* -* INPUT: -* int ethPortNum - Ethernet Port number. -* unsigned int mibOffset - MIB counter offset. -* -* OUTPUT: -* MV_U32* pHigh32 - pointer to place where 32 most significant bits -* of the counter will be stored. -* -* RETURN: -* 32 low sgnificant bits of MIB counter value. -* -*******************************************************************************/ -MV_U32 mvEthMibCounterRead(void* pPortHandle, unsigned int mibOffset, - MV_U32* pHigh32) -{ - int portNo; - MV_U32 valLow32, valHigh32; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - - portNo = pPortCtrl->portNo; - - valLow32 = MV_REG_READ(ETH_MIB_COUNTERS_BASE(portNo) + mibOffset); - - /* Implement FEr ETH. Erroneous Value when Reading the Upper 32-bits */ - /* of a 64-bit MIB Counter. */ - if( (mibOffset == ETH_MIB_GOOD_OCTETS_RECEIVED_LOW) || - (mibOffset == ETH_MIB_GOOD_OCTETS_SENT_LOW) ) - { - valHigh32 = MV_REG_READ(ETH_MIB_COUNTERS_BASE(portNo) + mibOffset + 4); - if(pHigh32 != NULL) - *pHigh32 = valHigh32; - } - return valLow32; -} - -/******************************************************************************* -* mvEthMibCountersClear - Clear all MIB counters -* -* DESCRIPTION: -* This function clears all MIB counters -* -* INPUT: -* int ethPortNum - Ethernet Port number. -* -* -* RETURN: void -* -*******************************************************************************/ -void mvEthMibCountersClear(void* pPortHandle) -{ - int i, portNo; - unsigned int dummy; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - - portNo = pPortCtrl->portNo; - - /* Perform dummy reads from MIB counters */ - for(i=ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i 0xFF) - { - mvOsPrintf("eth_%d: tos=0x%x is out of range\n", pPortCtrl->portNo, tos); - return -1; - } - regIdx = mvOsDivide(tos>>2, 10); - regOffs = mvOsReminder(tos>>2, 10); - - regValue = MV_REG_READ(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx) ); - rxq = (regValue >> (regOffs*3)); - rxq &= 0x7; - - return rxq; -} - -/******************************************************************************* -* mvEthTosToRxqSet - Map packets with special TOS value to special RX queue -* -* DESCRIPTION: -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int tos - TOS value in the IP header of the packet -* int rxq - RX Queue for packets with the configured TOS value -* Negative value (-1) means no special processing for these packets, -* so they will be processed as regular packets. -* -* RETURN: MV_STATUS -*******************************************************************************/ -MV_STATUS mvEthTosToRxqSet(void* pPortHandle, int tos, int rxq) -{ - MV_U32 regValue; - int regIdx, regOffs; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - - if( (rxq < 0) || (rxq >= MV_ETH_RX_Q_NUM) ) - { - mvOsPrintf("eth_%d: RX queue #%d is out of range\n", pPortCtrl->portNo, rxq); - return MV_BAD_PARAM; - } - if(tos > 0xFF) - { - mvOsPrintf("eth_%d: tos=0x%x is out of range\n", pPortCtrl->portNo, tos); - return MV_BAD_PARAM; - } - regIdx = mvOsDivide(tos>>2, 10); - regOffs = mvOsReminder(tos>>2, 10); - - regValue = MV_REG_READ(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx) ); - regValue &= ~(0x7 << (regOffs*3)); - regValue |= (rxq << (regOffs*3)); - - MV_REG_WRITE(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx), regValue); - return MV_OK; -} - -/******************************************************************************* -* mvEthVlanPrioRxQueue - Configure RX queue to capture VLAN tagged packets with -* special priority bits [0-2] -* -* DESCRIPTION: -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int bpduQueue - Special queue to capture VLAN tagged packets with special -* priority. -* Negative value (-1) means no special processing for these packets, -* so they will be processed as regular packets. -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_FAIL - Failed. -* -*******************************************************************************/ -MV_STATUS mvEthVlanPrioRxQueue(void* pPortHandle, int vlanPrio, int vlanPrioQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - MV_U32 vlanPrioReg; - - if(vlanPrioQueue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", vlanPrioQueue); - return MV_BAD_PARAM; - } - if(vlanPrio >= 8) - { - mvOsPrintf("ethDrv: vlanPrio=%d is out of range\n", vlanPrio); - return MV_BAD_PARAM; - } - - vlanPrioReg = MV_REG_READ(ETH_VLAN_TAG_TO_PRIO_REG(pPortCtrl->portNo)); - vlanPrioReg &= ~(0x7 << (vlanPrio*3)); - vlanPrioReg |= (vlanPrioQueue << (vlanPrio*3)); - MV_REG_WRITE(ETH_VLAN_TAG_TO_PRIO_REG(pPortCtrl->portNo), vlanPrioReg); - - return MV_OK; -} - - -/******************************************************************************* -* mvEthBpduRxQueue - Configure RX queue to capture BPDU packets. -* -* DESCRIPTION: -* This function defines processing of BPDU packets. -* BPDU packets can be accepted and captured to one of RX queues -* or can be processing as regular Multicast packets. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int bpduQueue - Special queue to capture BPDU packets (DA is equal to -* 01-80-C2-00-00-00 through 01-80-C2-00-00-FF, -* except for the Flow-Control Pause packets). -* Negative value (-1) means no special processing for BPDU, -* packets so they will be processed as regular Multicast packets. -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_FAIL - Failed. -* -*******************************************************************************/ -MV_STATUS mvEthBpduRxQueue(void* pPortHandle, int bpduQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - MV_U32 portCfgReg; - MV_U32 portCfgExtReg; - - if(bpduQueue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", bpduQueue); - return MV_BAD_PARAM; - } - - portCfgExtReg = MV_REG_READ(ETH_PORT_CONFIG_EXTEND_REG(pPortCtrl->portNo)); - - portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); - if(bpduQueue >= 0) - { - pPortCtrl->portConfig.rxBpduQ = bpduQueue; - - portCfgReg &= ~ETH_DEF_RX_BPDU_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_BPDU_QUEUE_MASK(pPortCtrl->portConfig.rxBpduQ); - - MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); - - portCfgExtReg |= ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK; - } - else - { - pPortCtrl->portConfig.rxBpduQ = -1; - /* no special processing for BPDU packets */ - portCfgExtReg &= (~ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK); - } - - MV_REG_WRITE(ETH_PORT_CONFIG_EXTEND_REG(pPortCtrl->portNo), portCfgExtReg); - - return MV_OK; -} - - -/******************************************************************************* -* mvEthArpRxQueue - Configure RX queue to capture ARP packets. -* -* DESCRIPTION: -* This function defines processing of ARP (type=0x0806) packets. -* ARP packets can be accepted and captured to one of RX queues -* or can be processed as other Broadcast packets. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int arpQueue - Special queue to capture ARP packets (type=0x806). -* Negative value (-1) means discard ARP packets -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_FAIL - Failed. -* -*******************************************************************************/ -MV_STATUS mvEthArpRxQueue(void* pPortHandle, int arpQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - MV_U32 portCfgReg; - - if(arpQueue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", arpQueue); - return MV_BAD_PARAM; - } - - portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); - - if(arpQueue >= 0) - { - pPortCtrl->portConfig.rxArpQ = arpQueue; - portCfgReg &= ~ETH_DEF_RX_ARP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_ARP_QUEUE_MASK(pPortCtrl->portConfig.rxArpQ); - - portCfgReg &= (~ETH_REJECT_ARP_BCAST_MASK); - } - else - { - pPortCtrl->portConfig.rxArpQ = -1; - portCfgReg |= ETH_REJECT_ARP_BCAST_MASK; - } - - MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); - - return MV_OK; -} - - -/******************************************************************************* -* mvEthTcpRxQueue - Configure RX queue to capture TCP packets. -* -* DESCRIPTION: -* This function defines processing of TCP packets. -* TCP packets can be accepted and captured to one of RX queues -* or can be processed as regular Unicast packets. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int tcpQueue - Special queue to capture TCP packets. Value "-1" -* means no special processing for TCP packets, -* so they will be processed as regular -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_FAIL - Failed. -* -*******************************************************************************/ -MV_STATUS mvEthTcpRxQueue(void* pPortHandle, int tcpQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - MV_U32 portCfgReg; - - if(tcpQueue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", tcpQueue); - return MV_BAD_PARAM; - } - portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); - - if(tcpQueue >= 0) - { - pPortCtrl->portConfig.rxTcpQ = tcpQueue; - portCfgReg &= ~ETH_DEF_RX_TCP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_TCP_QUEUE_MASK(pPortCtrl->portConfig.rxTcpQ); - - portCfgReg |= ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK; - } - else - { - pPortCtrl->portConfig.rxTcpQ = -1; - portCfgReg &= (~ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK); - } - - MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); - - return MV_OK; -} - - -/******************************************************************************* -* mvEthUdpRxQueue - Configure RX queue to capture UDP packets. -* -* DESCRIPTION: -* This function defines processing of UDP packets. -* TCP packets can be accepted and captured to one of RX queues -* or can be processed as regular Unicast packets. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int udpQueue - Special queue to capture UDP packets. Value "-1" -* means no special processing for UDP packets, -* so they will be processed as regular -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_FAIL - Failed. -* -*******************************************************************************/ -MV_STATUS mvEthUdpRxQueue(void* pPortHandle, int udpQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - MV_U32 portCfgReg; - - if(udpQueue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", udpQueue); - return MV_BAD_PARAM; - } - - portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); - - if(udpQueue >= 0) - { - pPortCtrl->portConfig.rxUdpQ = udpQueue; - portCfgReg &= ~ETH_DEF_RX_UDP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_UDP_QUEUE_MASK(pPortCtrl->portConfig.rxUdpQ); - - portCfgReg |= ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK; - } - else - { - pPortCtrl->portConfig.rxUdpQ = -1; - portCfgReg &= ~ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK; - } - - MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); - - return MV_OK; -} - - -/******************************************************************************/ -/* Speed, Duplex, FlowControl routines */ -/******************************************************************************/ - -/******************************************************************************* -* mvEthSpeedDuplexSet - Set Speed and Duplex of the port. -* -* DESCRIPTION: -* This function configure the port to work with desirable Duplex and Speed. -* Changing of these parameters are allowed only when port is disabled. -* This function disable the port if was enabled, change duplex and speed -* and, enable the port back if needed. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* ETH_PORT_SPEED speed - Speed of the port. -* ETH_PORT_SPEED duplex - Duplex of the port. -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_OUT_OF_RANGE - Failed. Port is out of valid range -* MV_NOT_FOUND - Failed. Port is not initialized. -* MV_BAD_PARAM - Input parameters (speed/duplex) in conflict. -* MV_BAD_VALUE - Value of one of input parameters (speed, duplex) -* is not valid -* -*******************************************************************************/ -MV_STATUS mvEthSpeedDuplexSet(void* pPortHandle, MV_ETH_PORT_SPEED speed, - MV_ETH_PORT_DUPLEX duplex) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - MV_U32 portSerialCtrlReg; - - if( (port < 0) || (port >= (int)mvCtrlEthMaxPortGet()) ) - return MV_OUT_OF_RANGE; - - pPortCtrl = ethPortCtrl[port]; - if(pPortCtrl == NULL) - return MV_NOT_FOUND; - - /* Check validity */ - if( (speed == MV_ETH_SPEED_1000) && (duplex == MV_ETH_DUPLEX_HALF) ) - return MV_BAD_PARAM; - - portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port)); - /* Set Speed */ - switch(speed) - { - case MV_ETH_SPEED_AN: - portSerialCtrlReg &= ~ETH_DISABLE_SPEED_AUTO_NEG_MASK; - break; - - case MV_ETH_SPEED_10: - portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK; - portSerialCtrlReg &= ~ETH_SET_GMII_SPEED_1000_MASK; - portSerialCtrlReg &= ~ETH_SET_MII_SPEED_100_MASK; - break; - - case MV_ETH_SPEED_100: - portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK; - portSerialCtrlReg &= ~ETH_SET_GMII_SPEED_1000_MASK; - portSerialCtrlReg |= ETH_SET_MII_SPEED_100_MASK; - break; - - case MV_ETH_SPEED_1000: - portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK; - portSerialCtrlReg |= ETH_SET_GMII_SPEED_1000_MASK; - break; - - default: - mvOsPrintf("ethDrv: Unexpected Speed value %d\n", speed); - return MV_BAD_VALUE; - } - /* Set duplex */ - switch(duplex) - { - case MV_ETH_DUPLEX_AN: - portSerialCtrlReg &= ~ETH_DISABLE_DUPLEX_AUTO_NEG_MASK; - break; - - case MV_ETH_DUPLEX_HALF: - portSerialCtrlReg |= ETH_DISABLE_DUPLEX_AUTO_NEG_MASK; - portSerialCtrlReg &= ~ETH_SET_FULL_DUPLEX_MASK; - break; - - case MV_ETH_DUPLEX_FULL: - portSerialCtrlReg |= ETH_DISABLE_DUPLEX_AUTO_NEG_MASK; - portSerialCtrlReg |= ETH_SET_FULL_DUPLEX_MASK; - break; - - default: - mvOsPrintf("ethDrv: Unexpected Duplex value %d\n", duplex); - return MV_BAD_VALUE; - } - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(port), portSerialCtrlReg); - - return MV_OK; -} - -/******************************************************************************* -* mvEthFlowCtrlSet - Set Flow Control of the port. -* -* DESCRIPTION: -* This function configure the port to work with desirable Duplex and -* Speed. Changing of these parameters are allowed only when port is -* disabled. This function disable the port if was enabled, change -* duplex and speed and, enable the port back if needed. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* MV_ETH_PORT_FC flowControl - Flow control of the port. -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_OUT_OF_RANGE - Failed. Port is out of valid range -* MV_NOT_FOUND - Failed. Port is not initialized. -* MV_BAD_VALUE - Value flowControl parameters is not valid -* -*******************************************************************************/ -MV_STATUS mvEthFlowCtrlSet(void* pPortHandle, MV_ETH_PORT_FC flowControl) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - MV_U32 portSerialCtrlReg; - - if( (port < 0) || (port >= (int)mvCtrlEthMaxPortGet() ) ) - return MV_OUT_OF_RANGE; - - pPortCtrl = ethPortCtrl[port]; - if(pPortCtrl == NULL) - return MV_NOT_FOUND; - - portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port)); - switch(flowControl) - { - case MV_ETH_FC_AN_ADV_DIS: - portSerialCtrlReg &= ~ETH_DISABLE_FC_AUTO_NEG_MASK; - portSerialCtrlReg &= ~ETH_ADVERTISE_SYM_FC_MASK; - break; - - case MV_ETH_FC_AN_ADV_SYM: - portSerialCtrlReg &= ~ETH_DISABLE_FC_AUTO_NEG_MASK; - portSerialCtrlReg |= ETH_ADVERTISE_SYM_FC_MASK; - break; - - case MV_ETH_FC_DISABLE: - portSerialCtrlReg |= ETH_DISABLE_FC_AUTO_NEG_MASK; - portSerialCtrlReg &= ~ETH_SET_FLOW_CTRL_MASK; - break; - - case MV_ETH_FC_ENABLE: - portSerialCtrlReg |= ETH_DISABLE_FC_AUTO_NEG_MASK; - portSerialCtrlReg |= ETH_SET_FLOW_CTRL_MASK; - break; - - default: - mvOsPrintf("ethDrv: Unexpected FlowControl value %d\n", flowControl); - return MV_BAD_VALUE; - } - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(port), portSerialCtrlReg); - - return MV_OK; -} - -/******************************************************************************* -* mvEthHeaderModeSet - Set port header mode. -* -* DESCRIPTION: -* This function configures the port to work in Marvell-Header mode. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* MV_ETH_HEADER_MODE headerMode - The header mode to set the port in. -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_NOT_SUPPORTED- Feature not supported. -* MV_OUT_OF_RANGE - Failed. Port is out of valid range -* MV_NOT_FOUND - Failed. Port is not initialized. -* MV_BAD_VALUE - Value of headerMode or numRxQueue parameter is not valid. -* -*******************************************************************************/ -MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - MV_U32 mvHeaderReg; - MV_U32 numRxQ = MV_ETH_RX_Q_NUM; - - if((port < 0) || (port >= mvCtrlEthMaxPortGet())) - return MV_OUT_OF_RANGE; - - pPortCtrl = ethPortCtrl[port]; - if(pPortCtrl == NULL) - return MV_NOT_FOUND; - - mvHeaderReg = MV_REG_READ(ETH_PORT_MARVELL_HEADER_REG(port)); - /* Disable header mode. */ - mvHeaderReg &= ~ETH_MVHDR_EN_MASK; - - if(headerMode != MV_ETH_DISABLE_HEADER_MODE) - { - /* Enable Header mode. */ - mvHeaderReg |= ETH_MVHDR_EN_MASK; - - /* Clear DA-Prefix & MHMask fields.*/ - mvHeaderReg &= ~(ETH_MVHDR_DAPREFIX_MASK | ETH_MVHDR_MHMASK_MASK); - - if(numRxQ > 1) - { - switch (headerMode) - { - case(MV_ETH_ENABLE_HEADER_MODE_PRI_2_1): - mvHeaderReg |= ETH_MVHDR_DAPREFIX_PRI_1_2; - break; - case(MV_ETH_ENABLE_HEADER_MODE_PRI_DBNUM): - mvHeaderReg |= ETH_MVHDR_DAPREFIX_DBNUM_PRI; - break; - case(MV_ETH_ENABLE_HEADER_MODE_PRI_SPID): - mvHeaderReg |= ETH_MVHDR_DAPREFIX_SPID_PRI; - break; - default: - break; - } - - switch (numRxQ) - { - case (4): - mvHeaderReg |= ETH_MVHDR_MHMASK_4_QUEUE; - break; - case (8): - mvHeaderReg |= ETH_MVHDR_MHMASK_8_QUEUE; - break; - default: - break; - } - } - } - - MV_REG_WRITE(ETH_PORT_MARVELL_HEADER_REG(port), mvHeaderReg); - - return MV_OK; -} - -#if (MV_ETH_VERSION >= 4) -/******************************************************************************* -* mvEthEjpModeSet - Enable / Disable EJP policy for TX. -* -* DESCRIPTION: -* This function -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* MV_BOOL TRUE - enable EJP mode -* FALSE - disable EJP mode -* -* OUTPUT: MV_STATUS -* MV_OK - Success -* Other - Failure -* -* RETURN: None. -* -*******************************************************************************/ -MV_STATUS mvEthEjpModeSet(void* pPortHandle, int mode) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - - if((port < 0) || (port >= mvCtrlEthMaxPortGet())) - return MV_OUT_OF_RANGE; - - pPortCtrl = ethPortCtrl[port]; - if(pPortCtrl == NULL) - return MV_NOT_FOUND; - - pPortCtrl->portConfig.ejpMode = mode; - if(mode) - { - /* EJP enabled */ - MV_REG_WRITE(ETH_TXQ_CMD_1_REG(port), ETH_TX_EJP_ENABLE_MASK); - } - else - { - /* EJP disabled */ - MV_REG_WRITE(ETH_TXQ_CMD_1_REG(port), 0); - } - mvOsPrintf("eth_%d: EJP %s - ETH_TXQ_CMD_1_REG: 0x%x = 0x%08x\n", - port, mode ? "Enabled" : "Disabled", ETH_TXQ_CMD_1_REG(port), - MV_REG_READ(ETH_TXQ_CMD_1_REG(port))); - - return MV_OK; -} -#endif /* MV_ETH_VERSION >= 4 */ - -/******************************************************************************* -* mvEthStatusGet - Get major properties of the port . -* -* DESCRIPTION: -* This function get major properties of the port (link, speed, duplex, -* flowControl, etc) and return them using the single structure. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* -* OUTPUT: -* MV_ETH_PORT_STATUS* pStatus - Pointer to structure, were port status -* will be placed. -* -* RETURN: None. -* -*******************************************************************************/ -void mvEthStatusGet(void* pPortHandle, MV_ETH_PORT_STATUS* pStatus) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - - MV_U32 regValue; - - regValue = MV_REG_READ( ETH_PORT_STATUS_REG(port) ); - - if(regValue & ETH_GMII_SPEED_1000_MASK) - pStatus->speed = MV_ETH_SPEED_1000; - else if(regValue & ETH_MII_SPEED_100_MASK) - pStatus->speed = MV_ETH_SPEED_100; - else - pStatus->speed = MV_ETH_SPEED_10; - - if(regValue & ETH_LINK_UP_MASK) - pStatus->isLinkUp = MV_TRUE; - else - pStatus->isLinkUp = MV_FALSE; - - if(regValue & ETH_FULL_DUPLEX_MASK) - pStatus->duplex = MV_ETH_DUPLEX_FULL; - else - pStatus->duplex = MV_ETH_DUPLEX_HALF; - - - if(regValue & ETH_ENABLE_RCV_FLOW_CTRL_MASK) - pStatus->flowControl = MV_ETH_FC_ENABLE; - else - pStatus->flowControl = MV_ETH_FC_DISABLE; -} - - -/******************************************************************************/ -/* PHY Control Functions */ -/******************************************************************************/ - - -/******************************************************************************* -* mvEthPhyAddrSet - Set the ethernet port PHY address. -* -* DESCRIPTION: -* This routine set the ethernet port PHY address according to given -* parameter. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int phyAddr - PHY address -* -* RETURN: -* None. -* -*******************************************************************************/ -void mvEthPhyAddrSet(void* pPortHandle, int phyAddr) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - unsigned int regData; - - regData = MV_REG_READ(ETH_PHY_ADDR_REG(port)); - - regData &= ~ETH_PHY_ADDR_MASK; - regData |= phyAddr; - - MV_REG_WRITE(ETH_PHY_ADDR_REG(port), regData); - - return; -} - -/******************************************************************************* -* mvEthPhyAddrGet - Get the ethernet port PHY address. -* -* DESCRIPTION: -* This routine returns the given ethernet port PHY address. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* -* -* RETURN: int - PHY address. -* -*******************************************************************************/ -int mvEthPhyAddrGet(void* pPortHandle) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - unsigned int regData; - - regData = MV_REG_READ(ETH_PHY_ADDR_REG(port)); - - return ((regData >> (5 * port)) & 0x1f); -} - -/******************************************************************************/ -/* Descriptor handling Functions */ -/******************************************************************************/ - -/******************************************************************************* -* etherInitRxDescRing - Curve a Rx chain desc list and buffer in memory. -* -* DESCRIPTION: -* This function prepares a Rx chained list of descriptors and packet -* buffers in a form of a ring. The routine must be called after port -* initialization routine and before port start routine. -* The Ethernet SDMA engine uses CPU bus addresses to access the various -* devices in the system (i.e. DRAM). This function uses the ethernet -* struct 'virtual to physical' routine (set by the user) to set the ring -* with physical addresses. -* -* INPUT: -* ETH_QUEUE_CTRL *pEthPortCtrl Ethernet Port Control srtuct. -* int rxQueue Number of Rx queue. -* int rxDescNum Number of Rx descriptors -* MV_U8* rxDescBaseAddr Rx descriptors memory area base addr. -* -* OUTPUT: -* The routine updates the Ethernet port control struct with information -* regarding the Rx descriptors and buffers. -* -* RETURN: None -* -*******************************************************************************/ -static void ethInitRxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue) -{ - ETH_RX_DESC *pRxDescBase, *pRxDesc, *pRxPrevDesc; - int ix, rxDescNum = pPortCtrl->rxQueueConfig[queue].descrNum; - ETH_QUEUE_CTRL *pQueueCtrl = &pPortCtrl->rxQueue[queue]; - - /* Make sure descriptor address is cache line size aligned */ - pRxDescBase = (ETH_RX_DESC*)MV_ALIGN_UP((MV_ULONG)pQueueCtrl->descBuf.bufVirtPtr, - CPU_D_CACHE_LINE_SIZE); - - pRxDesc = (ETH_RX_DESC*)pRxDescBase; - pRxPrevDesc = pRxDesc; - - /* initialize the Rx descriptors ring */ - for (ix=0; ixbufSize = 0x0; - pRxDesc->byteCnt = 0x0; - pRxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; - pRxDesc->bufPtr = 0x0; - pRxDesc->returnInfo = 0x0; - pRxPrevDesc = pRxDesc; - if(ix == (rxDescNum-1)) - { - /* Closing Rx descriptors ring */ - pRxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pRxDescBase); - } - else - { - pRxDesc = (ETH_RX_DESC*)((MV_ULONG)pRxDesc + ETH_RX_DESC_ALIGNED_SIZE); - pRxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pRxDesc); - } - ETH_DESCR_FLUSH_INV(pPortCtrl, pRxPrevDesc); - } - - pQueueCtrl->pCurrentDescr = pRxDescBase; - pQueueCtrl->pUsedDescr = pRxDescBase; - - pQueueCtrl->pFirstDescr = pRxDescBase; - pQueueCtrl->pLastDescr = pRxDesc; - pQueueCtrl->resource = 0; -} - -void ethResetRxDescRing(void* pPortHndl, int queue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->rxQueue[queue]; - ETH_RX_DESC* pRxDesc = (ETH_RX_DESC*)pQueueCtrl->pFirstDescr; - - pQueueCtrl->resource = 0; - if(pQueueCtrl->pFirstDescr != NULL) - { - while(MV_TRUE) - { - pRxDesc->bufSize = 0x0; - pRxDesc->byteCnt = 0x0; - pRxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; - pRxDesc->bufPtr = 0x0; - pRxDesc->returnInfo = 0x0; - ETH_DESCR_FLUSH_INV(pPortCtrl, pRxDesc); - if( (void*)pRxDesc == pQueueCtrl->pLastDescr) - break; - pRxDesc = RX_NEXT_DESC_PTR(pRxDesc, pQueueCtrl); - } - pQueueCtrl->pCurrentDescr = pQueueCtrl->pFirstDescr; - pQueueCtrl->pUsedDescr = pQueueCtrl->pFirstDescr; - - /* Update RX Command register */ - pPortCtrl->portRxQueueCmdReg |= (1 << queue); - - /* update HW */ - MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), - (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); - } - else - { - /* Update RX Command register */ - pPortCtrl->portRxQueueCmdReg &= ~(1 << queue); - - /* update HW */ - MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), 0); - } -} - -/******************************************************************************* -* etherInitTxDescRing - Curve a Tx chain desc list and buffer in memory. -* -* DESCRIPTION: -* This function prepares a Tx chained list of descriptors and packet -* buffers in a form of a ring. The routine must be called after port -* initialization routine and before port start routine. -* The Ethernet SDMA engine uses CPU bus addresses to access the various -* devices in the system (i.e. DRAM). This function uses the ethernet -* struct 'virtual to physical' routine (set by the user) to set the ring -* with physical addresses. -* -* INPUT: -* ETH_PORT_CTRL *pEthPortCtrl Ethernet Port Control srtuct. -* int txQueue Number of Tx queue. -* int txDescNum Number of Tx descriptors -* int txBuffSize Size of Tx buffer -* MV_U8* pTxDescBase Tx descriptors memory area base addr. -* -* OUTPUT: -* The routine updates the Ethernet port control struct with information -* regarding the Tx descriptors and buffers. -* -* RETURN: None. -* -*******************************************************************************/ -static void ethInitTxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue) -{ - ETH_TX_DESC *pTxDescBase, *pTxDesc, *pTxPrevDesc; - int ix, txDescNum = pPortCtrl->txQueueConfig[queue].descrNum; - ETH_QUEUE_CTRL *pQueueCtrl = &pPortCtrl->txQueue[queue]; - - /* Make sure descriptor address is cache line size aligned */ - pTxDescBase = (ETH_TX_DESC*)MV_ALIGN_UP((MV_ULONG)pQueueCtrl->descBuf.bufVirtPtr, - CPU_D_CACHE_LINE_SIZE); - - pTxDesc = (ETH_TX_DESC*)pTxDescBase; - pTxPrevDesc = pTxDesc; - - /* initialize the Tx descriptors ring */ - for (ix=0; ixbyteCnt = 0x0000; - pTxDesc->L4iChk = 0x0000; - pTxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; - pTxDesc->bufPtr = 0x0; - pTxDesc->returnInfo = 0x0; - - pTxPrevDesc = pTxDesc; - - if(ix == (txDescNum-1)) - { - /* Closing Tx descriptors ring */ - pTxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pTxDescBase); - } - else - { - pTxDesc = (ETH_TX_DESC*)((MV_ULONG)pTxDesc + ETH_TX_DESC_ALIGNED_SIZE); - pTxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pTxDesc); - } - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxPrevDesc); - } - - pQueueCtrl->pCurrentDescr = pTxDescBase; - pQueueCtrl->pUsedDescr = pTxDescBase; - - pQueueCtrl->pFirstDescr = pTxDescBase; - pQueueCtrl->pLastDescr = pTxDesc; - /* Leave one TX descriptor out of use */ - pQueueCtrl->resource = txDescNum - 1; -} - -void ethResetTxDescRing(void* pPortHndl, int queue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->txQueue[queue]; - ETH_TX_DESC* pTxDesc = (ETH_TX_DESC*)pQueueCtrl->pFirstDescr; - - pQueueCtrl->resource = 0; - if(pQueueCtrl->pFirstDescr != NULL) - { - while(MV_TRUE) - { - pTxDesc->byteCnt = 0x0000; - pTxDesc->L4iChk = 0x0000; - pTxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; - pTxDesc->bufPtr = 0x0; - pTxDesc->returnInfo = 0x0; - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxDesc); - pQueueCtrl->resource++; - if( (void*)pTxDesc == pQueueCtrl->pLastDescr) - break; - pTxDesc = TX_NEXT_DESC_PTR(pTxDesc, pQueueCtrl); - } - /* Leave one TX descriptor out of use */ - pQueueCtrl->resource--; - pQueueCtrl->pCurrentDescr = pQueueCtrl->pFirstDescr; - pQueueCtrl->pUsedDescr = pQueueCtrl->pFirstDescr; - - /* Update TX Command register */ - pPortCtrl->portTxQueueCmdReg |= MV_32BIT_LE_FAST(1 << queue); - /* update HW */ - MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), - (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); - } - else - { - /* Update TX Command register */ - pPortCtrl->portTxQueueCmdReg &= MV_32BIT_LE_FAST(~(1 << queue)); - /* update HW */ - MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), 0 ); - } -} - -/******************************************************************************* -* ethAllocDescrMemory - Free memory allocated for RX and TX descriptors. -* -* DESCRIPTION: -* This function allocates memory for RX and TX descriptors. -* - If ETH_DESCR_IN_SRAM defined, allocate memory from SRAM. -* - If ETH_DESCR_IN_SDRAM defined, allocate memory in SDRAM. -* -* INPUT: -* int size - size of memory should be allocated. -* -* RETURN: None -* -*******************************************************************************/ -static MV_U8* ethAllocDescrMemory(ETH_PORT_CTRL* pPortCtrl, int descSize, - MV_ULONG* pPhysAddr, MV_U32 *memHandle) -{ - MV_U8* pVirt; - -#if defined(ETH_DESCR_IN_SRAM) - if(ethDescInSram == MV_TRUE) - pVirt = (char*)mvSramMalloc(descSize, pPhysAddr); - else -#endif /* ETH_DESCR_IN_SRAM */ - { -#ifdef ETH_DESCR_UNCACHED - pVirt = (MV_U8*)mvOsIoUncachedMalloc(pPortCtrl->osHandle, descSize, - pPhysAddr,memHandle); -#else - pVirt = (MV_U8*)mvOsIoCachedMalloc(pPortCtrl->osHandle, descSize, - pPhysAddr, memHandle); -#endif /* ETH_DESCR_UNCACHED */ - } - memset(pVirt, 0, descSize); - - return pVirt; -} - -/******************************************************************************* -* ethFreeDescrMemory - Free memory allocated for RX and TX descriptors. -* -* DESCRIPTION: -* This function frees memory allocated for RX and TX descriptors. -* - If ETH_DESCR_IN_SRAM defined, free memory using gtSramFree() function. -* - If ETH_DESCR_IN_SDRAM defined, free memory using mvOsFree() function. -* -* INPUT: -* void* pVirtAddr - virtual pointer to memory allocated for RX and TX -* desriptors. -* -* RETURN: None -* -*******************************************************************************/ -void ethFreeDescrMemory(ETH_PORT_CTRL* pPortCtrl, MV_BUF_INFO* pDescBuf) -{ - if( (pDescBuf == NULL) || (pDescBuf->bufVirtPtr == NULL) ) - return; - -#if defined(ETH_DESCR_IN_SRAM) - if( ethDescInSram ) - { - mvSramFree(pDescBuf->bufSize, pDescBuf->bufPhysAddr, pDescBuf->bufVirtPtr); - return; - } -#endif /* ETH_DESCR_IN_SRAM */ - -#ifdef ETH_DESCR_UNCACHED - mvOsIoUncachedFree(pPortCtrl->osHandle, pDescBuf->bufSize, pDescBuf->bufPhysAddr, - pDescBuf->bufVirtPtr,pDescBuf->memHandle); -#else - mvOsIoCachedFree(pPortCtrl->osHandle, pDescBuf->bufSize, pDescBuf->bufPhysAddr, - pDescBuf->bufVirtPtr,pDescBuf->memHandle); -#endif /* ETH_DESCR_UNCACHED */ -} - -/******************************************************************************/ -/* Other Functions */ -/******************************************************************************/ - -void mvEthPortPowerUp(int port) -{ - MV_U32 regVal; - - /* MAC Cause register should be cleared */ - MV_REG_WRITE(ETH_UNIT_INTR_CAUSE_REG(port), 0); - - if (mvBoardIsPortInSgmii(port)) - mvEthPortSgmiiConfig(port); - - /* Cancel Port Reset */ - regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)); - regVal &= (~ETH_PORT_RESET_MASK); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal); - while( (MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)) & ETH_PORT_RESET_MASK) != 0); -} - -void mvEthPortPowerDown(int port) -{ - MV_U32 regVal; - - /* Port must be DISABLED */ - regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port)); - if( (regVal & ETH_PORT_ENABLE_MASK) != 0) - { - mvOsPrintf("ethPort #%d: PowerDown - port must be Disabled (PSC=0x%x)\n", - port, regVal); - return; - } - - /* Port Reset (Read after write the register as a precaution) */ - regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal | ETH_PORT_RESET_MASK); - while((MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)) & ETH_PORT_RESET_MASK) == 0); -} - -static void mvEthPortSgmiiConfig(int port) -{ - MV_U32 regVal; - - regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)); - - regVal |= (ETH_SGMII_MODE_MASK /*| ETH_INBAND_AUTO_NEG_ENABLE_MASK */); - regVal &= (~ETH_INBAND_AUTO_NEG_BYPASS_MASK); - - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal); -} - - - - - - - - - -- cgit v1.2.3