From a91ec2f50f4e64ec4b83c3f6e9d9f07104c035c7 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Mon, 1 Dec 2014 13:27:26 +0000
Subject: brcm63xx: add kernel 3.18 support

Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43461 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../brcm63xx/patches-3.18/532-board_AR-5381u.patch | 110 +++++++++++++++++++++
 1 file changed, 110 insertions(+)
 create mode 100644 target/linux/brcm63xx/patches-3.18/532-board_AR-5381u.patch

(limited to 'target/linux/brcm63xx/patches-3.18/532-board_AR-5381u.patch')

diff --git a/target/linux/brcm63xx/patches-3.18/532-board_AR-5381u.patch b/target/linux/brcm63xx/patches-3.18/532-board_AR-5381u.patch
new file mode 100644
index 0000000000..941bf8fdfa
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/532-board_AR-5381u.patch
@@ -0,0 +1,110 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -164,6 +164,91 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct sprom_fixup __initdata ar5381u_fixups[] = {
++	{ .offset = 97, .value = 0xfee5 },
++	{ .offset = 98, .value = 0x157c },
++	{ .offset = 99, .value = 0xfae7 },
++	{ .offset = 113, .value = 0xfefa },
++	{ .offset = 114, .value = 0x15d6 },
++	{ .offset = 115, .value = 0xfaf8 },
++};
++
++static struct board_info __initdata board_AR5381u = {
++	.name					= "96328A-1241N",
++	.expected_cpu_id			= 0x6328,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.use_fallback_sprom			= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 1,
++	.has_enetsw				= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used		= 1,
++				.phy_id		= 1,
++				.name		= "Port 1",
++			},
++			[1] = {
++				.used		= 1,
++				.phy_id		= 2,
++				.name		= "Port 2",
++			},
++			[2] = {
++				.used		= 1,
++				.phy_id		= 3,
++				.name		= "Port 3",
++			},
++			[3] = {
++				.used		= 1,
++				.phy_id		= 4,
++				.name		= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name			= "AR-5381u:green:power",
++			.gpio			= 4,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "AR-5381u:red:alarm",
++			.gpio			= 2,
++			.active_low		= 1,
++		},
++		{
++			.name			= "AR-5381u:green:inet",
++			.gpio			= 3,
++			.active_low		= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "reset",
++			.gpio			= 23,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++
++	.fallback_sprom = {
++		.type 				= SPROM_BCM43225,
++		.pci_bus			= 1,
++		.pci_dev			= 0,
++		.board_fixups			= ar5381u_fixups,
++		.num_board_fixups		= ARRAY_SIZE(ar5381u_fixups),
++	},
++};
++
+ static struct sprom_fixup __initdata ar5387un_fixups[] = {
+ 	{ .offset = 2, .value = 0x05bb },
+ 	{ .offset = 65, .value = 0x1204 },
+@@ -2912,6 +2997,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
++	&board_AR5381u,
+ 	&board_AR5387un,
+ 	&board_963281TAN,
+ 	&board_A4001N1,
+@@ -2983,6 +3069,7 @@ static struct of_device_id const bcm963x
+ 	{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+ 	{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
+ 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++	{ .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+ 	{ .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+ 	{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
+ #endif
-- 
cgit v1.2.3