From a91ec2f50f4e64ec4b83c3f6e9d9f07104c035c7 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Mon, 1 Dec 2014 13:27:26 +0000
Subject: brcm63xx: add kernel 3.18 support

Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43461 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../patches-3.18/527-board_dva-g3810bn-tl-1.patch  | 92 ++++++++++++++++++++++
 1 file changed, 92 insertions(+)
 create mode 100644 target/linux/brcm63xx/patches-3.18/527-board_dva-g3810bn-tl-1.patch

(limited to 'target/linux/brcm63xx/patches-3.18/527-board_dva-g3810bn-tl-1.patch')

diff --git a/target/linux/brcm63xx/patches-3.18/527-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-3.18/527-board_dva-g3810bn-tl-1.patch
new file mode 100644
index 0000000000..df5f0fcb88
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/527-board_dva-g3810bn-tl-1.patch
@@ -0,0 +1,92 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2301,6 +2301,73 @@ static struct board_info __initdata boar
+ 		},
+ 	}
+ };
++
++/* D-Link DVA-G3810BN/TL */
++static struct board_info __initdata board_DVAG3810BN = {
++	.name			= "DVAG3810BN",
++	.expected_cpu_id	= 0x6358,
++
++	.has_uart0		= 1,
++	.has_enet0		= 1,
++	.has_enet1		= 1,
++	.has_pci		= 1,
++
++	.enet0 = {
++		.has_phy		= 0,
++		.use_internal_phy	= 1,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++
++	.has_ohci0		= 1,
++	.has_pccard		= 1,
++	.has_ehci0		= 1,
++
++	.leds = {
++		{
++			.name	= "DVAG3810BN::voip",
++			.gpio	= 1,
++		},
++		{
++			.name	= "DVAG3810BN::dsl",
++			.gpio	= 22,
++			.active_low  = 1,
++		},
++		{
++			.name	= "DVAG3810BN::internet",
++			.gpio	= 23,
++			.active_low  = 1,
++		},
++		{
++			.name	= "DVAG3810BN::power",
++			.gpio	= 4,
++			.default_trigger = "default-on",
++		},
++		{
++			.name	= "DVAG3810BN::stop",
++			.gpio	= 5,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc	= "reset",
++			.gpio	= 34,
++			.active_low = 1,
++			.type	= EV_KEY,
++			.code	= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif /* CONFIG_BCM63XX_CPU_6358 */
+ 
+ /*
+@@ -2503,6 +2570,7 @@ static const struct board_info __initcon
+ 	&board_ct6373_1,
+ 	&board_HW553,
+ 	&board_spw303v,
++	&board_DVAG3810BN,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6368
+@@ -2550,6 +2618,7 @@ static struct of_device_id const bcm963x
+ 	{ .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, },
+ 	{ .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, },
+ 	{ .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, },
++	{ .compatible = "d-link,dva-g3810bn/tl", .data = &board_DVAG3810BN, },
+ 	{ .compatible = "huawei,hg553", .data = &board_HW553, },
+ 	{ .compatible = "pirelli,a226g", .data = &board_DWVS0, },
+ 	{ .compatible = "pirelli,a226m", .data = &board_DWVS0, },
-- 
cgit v1.2.3