From a91ec2f50f4e64ec4b83c3f6e9d9f07104c035c7 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Mon, 1 Dec 2014 13:27:26 +0000
Subject: brcm63xx: add kernel 3.18 support

Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43461 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../brcm63xx/patches-3.18/505-board_spw500v.patch  | 103 +++++++++++++++++++++
 1 file changed, 103 insertions(+)
 create mode 100644 target/linux/brcm63xx/patches-3.18/505-board_spw500v.patch

(limited to 'target/linux/brcm63xx/patches-3.18/505-board_spw500v.patch')

diff --git a/target/linux/brcm63xx/patches-3.18/505-board_spw500v.patch b/target/linux/brcm63xx/patches-3.18/505-board_spw500v.patch
new file mode 100644
index 0000000000..1d153c85a3
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/505-board_spw500v.patch
@@ -0,0 +1,103 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -640,6 +640,84 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct sprom_fixup __initdata spw500v_fixups[] = {
++	{ .offset = 46, .value = 0x3046 },
++	{ .offset = 47, .value = 0x15a7 },
++	{ .offset = 48, .value = 0xfa89 },
++	{ .offset = 49, .value = 0xfe79 },
++	{ .offset = 57, .value = 0x6a49 },
++};
++
++static struct board_info __initdata board_spw500v = {
++	.name				= "SPW500V",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_pci			= 1,
++	.use_fallback_sprom		= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++
++	.has_dsp			= 1,
++	.dsp = {
++		.gpio_rst		= 6,
++		.gpio_int		= 34,
++		.ext_irq		= 2,
++		.cs			= 2,
++	},
++
++	.leds = {
++		{
++			.name		= "SPW500V:red:power",
++			.gpio		= 1,
++			.active_low	= 1,
++		},
++		{
++			.name		= "SPW500V:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "SPW500V:green:ppp",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{	.name		= "SPW500V:green:pstn",
++			.gpio		= 28,
++			.active_low	= 1,
++		},
++		{
++			.name		= "SPW500V:green:voip",
++			.gpio		= 32,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 33,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++
++	.fallback_sprom = {
++		.type			= SPROM_BCM4318,
++		.pci_bus		= 0,
++		.pci_dev		= 1,
++		.board_fixups		= spw500v_fixups,
++		.num_board_fixups	= ARRAY_SIZE(spw500v_fixups),
++	},
++};
+ #endif /* CONFIG_BCM63XX_CPU_6348 */
+ 
+ /*
+@@ -1232,6 +1310,7 @@ static const struct board_info __initcon
+ 	&board_96348gw_a,
+ 	&board_rta1025w_16,
+ 	&board_96348_D4PW,
++	&board_spw500v,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -1269,6 +1348,7 @@ static struct of_device_id const bcm963x
+ 	{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
+ 	{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
+ 	{ .compatible = "sagem,f@st2404", .data = &board_FAST2404, },
++	{ .compatible = "t-com,spw500v", .data = &board_spw500v, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6358
+ 	{ .compatible = "alcatel,rg100a", .data = &board_96358vw2, },
-- 
cgit v1.2.3