From f10e6fd9af01ea8281cc8a20d2722250851673b2 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 10 Jun 2014 09:06:06 +0000 Subject: atheros: spaces fixes Add missed spaces and remove odd space as suggested by checkpatch. Signed-off-by: Sergey Ryazanov git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41091 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/atheros/patches-3.10/100-board.patch | 38 +++++++++++------------ 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'target/linux/atheros/patches-3.10/100-board.patch') diff --git a/target/linux/atheros/patches-3.10/100-board.patch b/target/linux/atheros/patches-3.10/100-board.patch index ee60b525f9..33c7ce56da 100644 --- a/target/linux/atheros/patches-3.10/100-board.patch +++ b/target/linux/atheros/patches-3.10/100-board.patch @@ -213,7 +213,7 @@ + radio_config = 0; + } + -+ return (u8 *) radio_config; ++ return radio_config; +} + +int __init @@ -248,7 +248,7 @@ + } + + board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL); -+ ar231x_board.config = (struct ar231x_boarddata *) board_data; ++ ar231x_board.config = (struct ar231x_boarddata *)board_data; + memcpy(board_data, bcfg, 0x100); + if (broken_boarddata) { + pr_warn("WARNING: broken board data detected\n"); @@ -269,7 +269,7 @@ + * of what the physical layout on the flash chip looks like */ + + if (ar231x_board.radio) -+ rcfg = (u8 *) ar231x_board.radio; ++ rcfg = (u8 *)ar231x_board.radio; + else + rcfg = find_radio_config(flash_limit, bcfg); + @@ -1818,13 +1818,13 @@ + +static const struct gpio_led_platform_data ar5312_led_data = { + .num_leds = ARRAY_SIZE(ar5312_leds), -+ .leds = (void *) ar5312_leds, ++ .leds = (void *)ar5312_leds, +}; + +static struct platform_device ar5312_gpio_leds = { + .name = "leds-gpio", + .id = -1, -+ .dev.platform_data = (void *) &ar5312_led_data, ++ .dev.platform_data = (void *)&ar5312_led_data, +}; +#endif + @@ -1857,7 +1857,7 @@ + ar231x_write_reg(AR531X_FLASHCTL2, + ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC)); + -+ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000); ++ return (char *)KSEG1ADDR(AR531X_FLASH + 0x800000); +} + +int __init ar5312_init_devices(void) @@ -1916,7 +1916,7 @@ + c--; + } + -+ switch(ar231x_devtype) { ++ switch (ar231x_devtype) { + case DEV_TYPE_AR5312: + ar5312_eth0_data.macaddr = config->enet0_mac; + ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0), @@ -2258,7 +2258,7 @@ + unsigned int imr; + + imr = ar231x_read_reg(AR2315_IMR); -+ switch(d->irq) { ++ switch (d->irq) { + case AR531X_MISC_IRQ_SPI: + imr |= AR2315_ISR_SPI; + break; @@ -2289,7 +2289,7 @@ + unsigned int imr; + + imr = ar231x_read_reg(AR2315_IMR); -+ switch(d->irq) { ++ switch (d->irq) { + case AR531X_MISC_IRQ_SPI: + imr &= ~AR2315_ISR_SPI; + break; @@ -2581,20 +2581,20 @@ + + ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start + + flash_size - 1; -+ return (u8 *) ar2315_spiflash_res[0].end + 1; ++ return (u8 *)ar2315_spiflash_res[0].end + 1; +} + +#ifdef CONFIG_LEDS_GPIO +static struct gpio_led ar2315_leds[6]; +static struct gpio_led_platform_data ar2315_led_data = { -+ .leds = (void *) ar2315_leds, ++ .leds = (void *)ar2315_leds, +}; + +static struct platform_device ar2315_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { -+ .platform_data = (void *) &ar2315_led_data, ++ .platform_data = (void *)&ar2315_led_data, + } +}; + @@ -2606,8 +2606,8 @@ + + ar2315_led_data.num_leds = 0; + for (i = 1; i < 8; i++) { -+ if((i == AR2315_RESET_GPIO) || -+ (i == ar231x_board.config->reset_config_gpio)) ++ if ((i == AR2315_RESET_GPIO) || ++ (i == ar231x_board.config->reset_config_gpio)) + continue; + + if (i == ar231x_board.config->sys_led_gpio) @@ -2652,12 +2652,12 @@ +static void +ar2315_restart(char *command) +{ -+ void (*mips_reset_vec)(void) = (void *) 0xbfc00000; ++ void (*mips_reset_vec)(void) = (void *)0xbfc00000; + + local_irq_disable(); + + /* try reset the system via reset control */ -+ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM); ++ ar231x_write_reg(AR2315_COLD_RESET, AR2317_RESET_SYSTEM); + + /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround. + * give it some time to attempt a gpio based hardware reset @@ -2797,7 +2797,7 @@ + /* Clear any lingering AHB errors */ + config = read_c0_config(); + write_c0_config(config & ~0x3); -+ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET); ++ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET); + ar231x_read_reg(AR2315_AHB_ERR1); + ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION); + @@ -2922,13 +2922,13 @@ +static inline u32 +ar231x_read_reg(u32 reg) +{ -+ return __raw_readl((u32 *) KSEG1ADDR(reg)); ++ return __raw_readl((u32 *)KSEG1ADDR(reg)); +} + +static inline void +ar231x_write_reg(u32 reg, u32 val) +{ -+ __raw_writel(val, (u32 *) KSEG1ADDR(reg)); ++ __raw_writel(val, (u32 *)KSEG1ADDR(reg)); +} + +static inline u32 -- cgit v1.2.3