From e244d02a5bac420e7c8308169d2d1bc37614a147 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 3 Sep 2014 03:09:51 +0000 Subject: at91: move 3.10 specific files and patches In preparation for adding 3.14 kernel support, move files and patches to a separate per-version directory since some of them will have incompatible changes (e.g: dts) Signed-off-by: Florian Fainelli git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42413 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../at91/files-3.10/arch/arm/boot/dts/lmu5000.dts | 125 ++++++++++++ .../files-3.10/arch/arm/mach-at91/board-tqma9263.c | 219 +++++++++++++++++++++ .../linux/at91/files-3.10/drivers/mtd/at91part.c | 122 ++++++++++++ .../linux/at91/files/arch/arm/boot/dts/lmu5000.dts | 125 ------------ .../at91/files/arch/arm/mach-at91/board-tqma9263.c | 219 --------------------- target/linux/at91/files/drivers/mtd/at91part.c | 122 ------------ .../100-ARM-at91-build-dtb-for-LMU5000.patch | 10 + .../at91/patches-3.10/700-tqma9263-support.patch | 25 +++ .../patches-3.10/805-free_some_portc_pins.patch | 11 ++ ...-AT91-flexibity-default-leds-to-heartbeat.patch | 60 ++++++ .../100-ARM-at91-build-dtb-for-LMU5000.patch | 10 - .../linux/at91/patches/700-tqma9263-support.patch | 25 --- .../at91/patches/805-free_some_portc_pins.patch | 11 -- ...-AT91-flexibity-default-leds-to-heartbeat.patch | 60 ------ 14 files changed, 572 insertions(+), 572 deletions(-) create mode 100644 target/linux/at91/files-3.10/arch/arm/boot/dts/lmu5000.dts create mode 100644 target/linux/at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c create mode 100644 target/linux/at91/files-3.10/drivers/mtd/at91part.c delete mode 100644 target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts delete mode 100644 target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c delete mode 100644 target/linux/at91/files/drivers/mtd/at91part.c create mode 100644 target/linux/at91/patches-3.10/100-ARM-at91-build-dtb-for-LMU5000.patch create mode 100644 target/linux/at91/patches-3.10/700-tqma9263-support.patch create mode 100644 target/linux/at91/patches-3.10/805-free_some_portc_pins.patch create mode 100644 target/linux/at91/patches-3.10/901-AT91-flexibity-default-leds-to-heartbeat.patch delete mode 100644 target/linux/at91/patches/100-ARM-at91-build-dtb-for-LMU5000.patch delete mode 100644 target/linux/at91/patches/700-tqma9263-support.patch delete mode 100644 target/linux/at91/patches/805-free_some_portc_pins.patch delete mode 100644 target/linux/at91/patches/901-AT91-flexibity-default-leds-to-heartbeat.patch (limited to 'target/linux/at91') diff --git a/target/linux/at91/files-3.10/arch/arm/boot/dts/lmu5000.dts b/target/linux/at91/files-3.10/arch/arm/boot/dts/lmu5000.dts new file mode 100644 index 0000000000..671f452416 --- /dev/null +++ b/target/linux/at91/files-3.10/arch/arm/boot/dts/lmu5000.dts @@ -0,0 +1,125 @@ +/* + * lmu5000.dst - Device Tree file for CalAmp LMU5000 board + * + * Copyright (C) 2013 Adam Porter + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9g20.dtsi" + +/ { + model = "CalAmp LMU5000"; + compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + pinctrl@fffff400 { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = + <2 1 0x2 0x0>; /* PC1 periph B */ + }; + + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; + }; + + usart2: serial@fffb8000 { + status = "okay"; + }; + + uart0: serial@fffd4000 { + status = "okay"; + }; + + uart1: serial@fffd8000 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "mii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 0>; + status = "okay"; + }; + + ssc0: ssc@fffbc000 { + status = "okay"; + pinctrl-0 = <&pinctrl_ssc0_tx>; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + kernel@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + rootfs@400000 { + label = "rootfs"; + reg = <0x400000 0x3C00000>; + }; + + user1@4000000 { + label = "user1"; + reg = <0x4000000 0x2000000>; + }; + + user2@6000000 { + label = "user2"; + reg = <0x6000000 0x2000000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; +}; diff --git a/target/linux/at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c b/target/linux/at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c new file mode 100644 index 0000000000..cae1fe9359 --- /dev/null +++ b/target/linux/at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c @@ -0,0 +1,219 @@ +/* + * Copyright (C) 2008 I2SE GmbH + * Copyright (C) 2010 IEQualize GmbH + * Copyright (C) 2010-2011 Michael Heimpold + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include