From 2b12dc6530da8d4045af0c81dff67b022e9718ae Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 18 Feb 2016 08:22:32 +0000 Subject: linux: add support of Synopsys ARCHS38-based boards This patch introduces support of new boards with ARC HS38 cores. ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA. As with ARC770 we're addind support for 2 boards for now: [1] Synopsys SDP board (AXS103) This is the same base-board as in AXS101 but with FPGA-based CPU-tile where ARCHs38 core is implemented. [2] nSIM Again this is the same simulation engine but configured for new instruction set and features of new CPU. Signed-off-by: Alexey Brodkin Cc: Felix Fietkau Cc: Jo-Philipp Wich Cc: Jonas Gorski git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48740 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/archs38/dts/axc003_idu.dtsi | 126 +++++++++++++++++ target/linux/archs38/dts/axs103_idu.dts | 25 ++++ target/linux/archs38/dts/axs10x_mb.dtsi | 225 +++++++++++++++++++++++++++++++ target/linux/archs38/dts/nsim_hs_idu.dts | 73 ++++++++++ target/linux/archs38/dts/skeleton.dtsi | 37 +++++ 5 files changed, 486 insertions(+) create mode 100644 target/linux/archs38/dts/axc003_idu.dtsi create mode 100644 target/linux/archs38/dts/axs103_idu.dts create mode 100644 target/linux/archs38/dts/axs10x_mb.dtsi create mode 100644 target/linux/archs38/dts/nsim_hs_idu.dts create mode 100644 target/linux/archs38/dts/skeleton.dtsi (limited to 'target/linux/archs38/dts') diff --git a/target/linux/archs38/dts/axc003_idu.dtsi b/target/linux/archs38/dts/axc003_idu.dtsi new file mode 100644 index 0000000000..06a9f294a2 --- /dev/null +++ b/target/linux/archs38/dts/axc003_idu.dtsi @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc + */ + +/ { + compatible = "snps,arc"; + clock-frequency = <90000000>; + #address-cells = <1>; + #size-cells = <1>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0xf0000000 0x10000000>; + + cpu_intc: archs-intc@cpu { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&cpu_intc>; + + /* + * + * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 + */ + #interrupt-cells = <2>; + + /* + * upstream irqs to core intc - downstream these are + * "COMMON" irq 0,1.. + */ + interrupts = <24 25>; + }; + + /* + * this GPIO block ORs all interrupts on CPU card (creg,..) + * to uplink only 1 IRQ to ARC core intc + */ + dw-apb-gpio@0x2000 { + compatible = "snps,dw-apb-gpio"; + reg = < 0x2000 0x80 >; + #address-cells = <1>; + #size-cells = <0>; + + ictl_intc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&idu_intc>; + + /* + * cmn irq 1 -> cpu irq 25 + * Distribute to cpu0 only + */ + interrupts = <1 1>; + }; + }; + + debug_uart: dw-apb-uart@0x5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33333000>; + interrupt-parent = <&ictl_intc>; + interrupts = <2 4>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupt-parent = <&cpu_intc>; + interrupts = <20>; + }; + }; + + /* + * This INTC is actually connected to DW APB GPIO + * which acts as a wire between MB INTC and CPU INTC. + * GPIO INTC is configured in platform init code + * and here we mimic direct connection from MB INTC to + * CPU INTC, thus we set "interrupts = <0 1>" instead of + * "interrupts = <12>" + * + * This intc actually resides on MB, but we move it here to + * avoid duplicating the MB dtsi file given that IRQ from + * this intc to cpu intc are different for axs101 and axs103 + */ + mb_intc: dw-apb-ictl@0xe0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0xe0012000 0x200 >; + interrupt-controller; + interrupt-parent = <&idu_intc>; + interrupts = <0 1>; /* cmn irq 0 -> cpu irq 24 + distribute to cpu0 only */ + }; + + memory { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x80000000 0x40000000>; + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MiB */ + }; +}; diff --git a/target/linux/archs38/dts/axs103_idu.dts b/target/linux/archs38/dts/axs103_idu.dts new file mode 100644 index 0000000000..9c4bf0f28f --- /dev/null +++ b/target/linux/archs38/dts/axs103_idu.dts @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Device Tree for AXS103 SDP with AXS10X Main Board and + * AXC003 FPGA Card (with SMP bitfile) + */ +/dts-v1/; + +/include/ "axc003_idu.dtsi" +/include/ "axs10x_mb.dtsi" + +/ { + model = "Synopsys AXS103 Development Board"; + compatible = "snps,axs103", "snps,arc-sdp"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8"; + }; +}; diff --git a/target/linux/archs38/dts/axs10x_mb.dtsi b/target/linux/archs38/dts/axs10x_mb.dtsi new file mode 100644 index 0000000000..44a578c107 --- /dev/null +++ b/target/linux/archs38/dts/axs10x_mb.dtsi @@ -0,0 +1,225 @@ +/* + * Support for peripherals on the AXS10x mainboard + * + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + axs10x_mb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0xe0000000 0x10000000>; + interrupt-parent = <&mb_intc>; + + clocks { + i2cclk: i2cclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + apbclk: apbclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + mmcclk: mmcclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + }; + + ethernet@0x18000 { + #interrupt-cells = <1>; + compatible = "snps,dwmac"; + reg = < 0x18000 0x2000 >; + interrupts = < 4 >; + interrupt-names = "macirq"; + phy-mode = "rgmii"; + snps,pbl = < 32 >; + clocks = <&apbclk>; + clock-names = "stmmaceth"; + max-speed = <100>; + }; + + ehci@0x40000 { + compatible = "generic-ehci"; + reg = < 0x40000 0x100 >; + interrupts = < 8 >; + }; + + ohci@0x60000 { + compatible = "generic-ohci"; + reg = < 0x60000 0x100 >; + interrupts = < 8 >; + }; + + /* + * According to DW Mobile Storage databook it is required + * to use "Hold Register" if card is enumerated in SDR12 or + * SDR25 modes. + * + * Utilization of "Hold Register" is already implemented via + * dw_mci_pltfm_prepare_command() which in its turn gets + * used through dw_mci_drv_data->prepare_command call-back. + * This call-back is used in Altera Socfpga platform and so + * we may reuse it saying that we're compatible with their + * "altr,socfpga-dw-mshc". + * + * Most probably "Hold Register" utilization is platform- + * independent requirement which means that single unified + * "snps,dw-mshc" should be enough for all users of DW MMC once + * dw_mci_pltfm_prepare_command() is used in generic platform + * code. + */ + mmc@0x15000 { + compatible = "altr,socfpga-dw-mshc"; + reg = < 0x15000 0x400 >; + num-slots = < 1 >; + fifo-depth = < 16 >; + card-detect-delay = < 200 >; + clocks = <&apbclk>, <&mmcclk>; + clock-names = "biu", "ciu"; + interrupts = < 7 >; + bus-width = < 4 >; + }; + + uart@0x20000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20000 0x100>; + clock-frequency = <33333333>; + interrupts = <17>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart@0x21000 { + compatible = "snps,dw-apb-uart"; + reg = <0x21000 0x100>; + clock-frequency = <33333333>; + interrupts = <18>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + /* UART muxed with USB data port (ttyS3) */ + uart@0x22000 { + compatible = "snps,dw-apb-uart"; + reg = <0x22000 0x100>; + clock-frequency = <33333333>; + interrupts = <19>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + i2c@0x1d000 { + compatible = "snps,designware-i2c"; + reg = <0x1d000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <14>; + }; + + i2c@0x1e000 { + compatible = "snps,designware-i2c"; + reg = <0x1e000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <15>; + }; + + i2c@0x1f000 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1f000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <16>; + + eeprom@0x54{ + compatible = "24c01"; + reg = <0x54>; + pagesize = <0x8>; + }; + + eeprom@0x57{ + compatible = "24c04"; + reg = <0x57>; + pagesize = <0x8>; + }; + }; + + gpio0:gpio@13000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x13000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + gpio0_banka: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + + gpio0_bankb: gpio-controller@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <1>; + }; + + gpio0_bankc: gpio-controller@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <2>; + }; + }; + + gpio1:gpio@14000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x14000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + gpio1_banka: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + }; + + gpio1_bankb: gpio-controller@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <10>; + reg = <1>; + }; + + gpio1_bankc: gpio-controller@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <2>; + }; + }; + }; +}; diff --git a/target/linux/archs38/dts/nsim_hs_idu.dts b/target/linux/archs38/dts/nsim_hs_idu.dts new file mode 100644 index 0000000000..75f539bb0d --- /dev/null +++ b/target/linux/archs38/dts/nsim_hs_idu.dts @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = "Synopsys ARC HS38 nSIM simulator"; + compatible = "snps,nsim_hs"; + interrupt-parent = <&core_intc>; + + chosen { + bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8"; + }; + + aliases { + serial0 = &arcuart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + core_intc: core-interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + + /* + * + * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 + */ + #interrupt-cells = <2>; + + /* + * upstream irqs to core intc - downstream these are + * "COMMON" irq 0,1.. + */ + interrupts = <24 25 26 27 28 29 30 31>; + }; + + arcuart0: serial@c0fc1000 { + compatible = "snps,arc-uart"; + reg = <0xc0fc1000 0x100>; + interrupt-parent = <&idu_intc>; + interrupts = <0 0>; + clock-frequency = <80000000>; + current-speed = <115200>; + status = "okay"; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupts = <20>; + }; + }; +}; diff --git a/target/linux/archs38/dts/skeleton.dtsi b/target/linux/archs38/dts/skeleton.dtsi new file mode 100644 index 0000000000..296d371a33 --- /dev/null +++ b/target/linux/archs38/dts/skeleton.dtsi @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Skeleton device tree; the bare minimum needed to boot; just include and + * add a compatible value. + */ + +/ { + compatible = "snps,arc"; + clock-frequency = <80000000>; /* 80 MHZ */ + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "snps,arc770d"; + reg = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256M */ + }; +}; -- cgit v1.2.3