From 39bb49bcf4f3f78c109e32d1c730925a5ab01778 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 16 Dec 2013 19:09:57 +0000 Subject: busybox: remove busybox menuconfig from top level menuconfig This will help with avoiding bogus bug reports caused by stale configs and bad cases of user tinkering :) Signed-off-by: Felix Fietkau git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39106 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/utils/busybox/config/networking/Config.in | 1088 --------------------- 1 file changed, 1088 deletions(-) delete mode 100644 package/utils/busybox/config/networking/Config.in (limited to 'package/utils/busybox/config/networking/Config.in') diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in deleted file mode 100644 index 442eb03428..0000000000 --- a/package/utils/busybox/config/networking/Config.in +++ /dev/null @@ -1,1088 +0,0 @@ -# DO NOT EDIT. This file is generated from Config.src -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Networking Utilities" - -config BUSYBOX_CONFIG_NAMEIF - bool "nameif" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - nameif is used to rename network interface by its MAC address. - Renamed interfaces MUST be in the down state. - It is possible to use a file (default: /etc/mactab) - with list of new interface names and MACs. - Maximum interface name length: IFNAMSIZ = 16 - File fields are separated by space or tab. - File format: - # Comment - new_interface_name XX:XX:XX:XX:XX:XX - -config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED - bool "Extended nameif" - default n - depends on BUSYBOX_CONFIG_NAMEIF - help - This extends the nameif syntax to support the bus_info, driver, - phyaddr selectors. The syntax is compatible to the normal nameif. - File format: - new_interface_name driver=asix bus=usb-0000:00:08.2-3 - new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 - new_interface_name phy_address=2 00:80:C8:38:91:B5 - new_interface_name mac=00:80:C8:38:91:B5 - new_interface_name 00:80:C8:38:91:B5 -config BUSYBOX_CONFIG_NBDCLIENT - bool "nbd-client" - default n - help - Network block device client -config BUSYBOX_CONFIG_NC - bool "nc" - default y - help - A simple Unix utility which reads and writes data across network - connections. - -config BUSYBOX_CONFIG_NC_SERVER - bool "Netcat server options (-l)" - default n - depends on BUSYBOX_CONFIG_NC - help - Allow netcat to act as a server. - -config BUSYBOX_CONFIG_NC_EXTRA - bool "Netcat extensions (-eiw and filename)" - default n - depends on BUSYBOX_CONFIG_NC - help - Add -e (support for executing the rest of the command line after - making or receiving a successful connection), -i (delay interval for - lines sent), -w (timeout for initial connection). - -config BUSYBOX_CONFIG_NC_110_COMPAT - bool "Netcat 1.10 compatibility (+2.5k)" - default n # off specially for Rob - depends on BUSYBOX_CONFIG_NC - help - This option makes nc closely follow original nc-1.10. - The code is about 2.5k bigger. It enables - -s ADDR, -n, -u, -v, -o FILE, -z options, but loses - busybox-specific extensions: -f FILE and -ll. -config BUSYBOX_CONFIG_PING - bool "ping" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to - elicit an ICMP ECHO_RESPONSE from a host or gateway. - -config BUSYBOX_CONFIG_PING6 - bool "ping6" - default y - depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING - help - This will give you a ping that can talk IPv6. - -config BUSYBOX_CONFIG_FEATURE_FANCY_PING - bool "Enable fancy ping output" - default y - depends on BUSYBOX_CONFIG_PING - help - Make the output from the ping applet include statistics, and at the - same time provide full support for ICMP packets. -config BUSYBOX_CONFIG_WHOIS - bool "whois" - default n - help - whois is a client for the whois directory service - -config BUSYBOX_CONFIG_FEATURE_IPV6 - bool "Enable IPv6 support" - default IPV6 - help - Enable IPv6 support in busybox. - This adds IPv6 support in the networking applets. - -config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL - bool "Enable Unix domain socket support (usually not needed)" - default n - help - Enable Unix domain socket support in all busybox networking - applets. Address of the form local:/path/to/unix/socket - will be recognized. - - This extension is almost never used in real world usage. - You most likely want to say N. - -config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS - bool "Prefer IPv4 addresses from DNS queries" - default y - depends on BUSYBOX_CONFIG_FEATURE_IPV6 - help - Use IPv4 address of network host if it has one. - - If this option is off, the first returned address will be used. - This may cause problems when your DNS server is IPv6-capable and - is returning IPv6 host addresses too. If IPv6 address - precedes IPv4 one in DNS reply, busybox network applets - (e.g. wget) will use IPv6 address. On an IPv6-incapable host - or network applets will fail to connect to the host - using IPv6 address. - -config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS - bool "Verbose resolution errors" - default y - help - Enable if you are not satisfied with simplistic - "can't resolve 'hostname.com'" and want to know more. - This may increase size of your executable a bit. - -config BUSYBOX_CONFIG_ARP - bool "arp" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Manipulate the system ARP cache. - -config BUSYBOX_CONFIG_ARPING - bool "arping" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Ping hosts by ARP packets. - -config BUSYBOX_CONFIG_BRCTL - bool "brctl" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Manage ethernet bridges. - Supports addbr/delbr and addif/delif. - -config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY - bool "Fancy options" - default y - depends on BUSYBOX_CONFIG_BRCTL - help - Add support for extended option like: - setageing, setfd, sethello, setmaxage, - setpathcost, setportprio, setbridgeprio, - stp - This adds about 600 bytes. - -config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW - bool "Support show" - default y - depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY - help - Add support for option which prints the current config: - show - -config BUSYBOX_CONFIG_DNSD - bool "dnsd" - default n - help - Small and static DNS server daemon. - -config BUSYBOX_CONFIG_ETHER_WAKE - bool "ether-wake" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Send a magic packet to wake up sleeping machines. - -config BUSYBOX_CONFIG_FAKEIDENTD - bool "fakeidentd" - default n - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - fakeidentd listens on the ident port and returns a predefined - fake value on any query. - -config BUSYBOX_CONFIG_FTPD - bool "ftpd" - default n - help - simple FTP daemon. You have to run it via inetd. - -config BUSYBOX_CONFIG_FEATURE_FTP_WRITE - bool "Enable upload commands" - default n - depends on BUSYBOX_CONFIG_FTPD - help - Enable all kinds of FTP upload commands (-w option) - -config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST - bool "Enable workaround for RFC-violating clients" - default n - depends on BUSYBOX_CONFIG_FTPD - help - Some ftp clients (among them KDE's Konqueror) issue illegal - "LIST -l" requests. This option works around such problems. - It might prevent you from listing files starting with "-" and - it increases the code size by ~40 bytes. - Most other ftp servers seem to behave similar to this. - -config BUSYBOX_CONFIG_FTPGET - bool "ftpget" - default n - help - Retrieve a remote file via FTP. - -config BUSYBOX_CONFIG_FTPPUT - bool "ftpput" - default n - help - Store a remote file via FTP. - -config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS - bool "Enable long options in ftpget/ftpput" - default n - depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT) - help - Support long options for the ftpget/ftpput applet. - -config BUSYBOX_CONFIG_HOSTNAME - bool "hostname" - default n - help - Show or set the system's host name. - -config BUSYBOX_CONFIG_HTTPD - bool "httpd" - default n - help - Serve web pages via an HTTP server. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES - bool "Support 'Ranges:' header" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - Makes httpd emit "Accept-Ranges: bytes" header and understand - "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted - downloads, seeking in multimedia players etc. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE - bool "Use sendfile system call" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - When enabled, httpd will use the kernel sendfile() function - instead of read/write loop. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID - bool "Enable -u option" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows the server to run as a specific user - rather than defaulting to the user that starts the server. - Use of this option requires special privileges to change to a - different user. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH - bool "Enable Basic http Authentication" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - Utilizes password settings from /etc/httpd.conf for basic - authentication on a per url basis. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5 - bool "Support MD5 crypted passwords for http Authentication" - default n - depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH - help - Enables basic per URL authentication from /etc/httpd.conf - using md5 passwords. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI - bool "Support Common Gateway Interface (CGI)" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows scripts and executables to be invoked - when specific URLs are requested. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR - bool "Support for running scripts through an interpreter" - default n - depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI - help - This option enables support for running scripts through an - interpreter. Turn this on if you want PHP scripts to work - properly. You need to supply an additional line in your httpd - config file: - *.php:/path/to/your/php - -config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV - bool "Set REMOTE_PORT environment variable for CGI" - default n - depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI - help - Use of this option can assist scripts in generating - references that contain a unique port number. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR - bool "Enable -e option (useful for CGIs written as shell scripts)" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows html encoding of arbitrary strings for display - by the browser. Output goes to stdout. - For example, httpd -e "" produces - "<Hello World>". - -config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES - bool "Support for custom error pages" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows you to define custom error pages in - the configuration file instead of the default HTTP status - error pages. For instance, if you add the line: - E404:/path/e404.html - in the config file, the server will respond the specified - '/path/e404.html' file instead of the terse '404 NOT FOUND' - message. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY - bool "Support for reverse proxy" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - This option allows you to define URLs that will be forwarded - to another HTTP server. To setup add the following line to the - configuration file - P:/url/:http://hostname[:port]/new/path/ - Then a request to /url/myfile will be forwarded to - http://hostname[:port]/new/path/myfile. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP - bool "Support for GZIP content encoding" - default n - depends on BUSYBOX_CONFIG_HTTPD - help - Makes httpd send files using GZIP content encoding if the - client supports it and a pre-compressed .gz exists. - -config BUSYBOX_CONFIG_IFCONFIG - bool "ifconfig" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Ifconfig is used to configure the kernel-resident network interfaces. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS - bool "Enable status reporting output (+7k)" - default y - depends on BUSYBOX_CONFIG_IFCONFIG - help - If ifconfig is called with no arguments it will display the status - of the currently active interfaces. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP - bool "Enable slip-specific options \"keepalive\" and \"outfill\"" - default n - depends on BUSYBOX_CONFIG_IFCONFIG - help - Allow "keepalive" and "outfill" support for SLIP. If you're not - planning on using serial lines, leave this unchecked. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ - bool "Enable options \"mem_start\", \"io_addr\", and \"irq\"" - default n - depends on BUSYBOX_CONFIG_IFCONFIG - help - Allow the start address for shared memory, start address for I/O, - and/or the interrupt line used by the specified device. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW - bool "Enable option \"hw\" (ether only)" - default y - depends on BUSYBOX_CONFIG_IFCONFIG - help - Set the hardware address of this interface, if the device driver - supports this operation. Currently, we only support the 'ether' - class. - -config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS - bool "Set the broadcast automatically" - default y - depends on BUSYBOX_CONFIG_IFCONFIG - help - Setting this will make ifconfig attempt to find the broadcast - automatically if the value '+' is used. - -config BUSYBOX_CONFIG_IFENSLAVE - bool "ifenslave" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Userspace application to bind several interfaces - to a logical interface (use with kernel bonding driver). - -config BUSYBOX_CONFIG_IFPLUGD - bool "ifplugd" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Network interface plug detection daemon. - -config BUSYBOX_CONFIG_IFUPDOWN - bool "ifupdown" - default n - help - Activate or deactivate the specified interfaces. This applet makes - use of either "ifconfig" and "route" or the "ip" command to actually - configure network interfaces. Therefore, you will probably also want - to enable either IFCONFIG and ROUTE, or enable - FEATURE_IFUPDOWN_IP and the various IP options. Of - course you could use non-busybox versions of these programs, so - against my better judgement (since this will surely result in plenty - of support questions on the mailing list), I do not force you to - enable these additional options. It is up to you to supply either - "ifconfig", "route" and "run-parts" or the "ip" command, either - via busybox or via standalone utilities. - -config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH - string "Absolute path to ifstate file" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - ifupdown keeps state information in a file called ifstate. - Typically it is located in /var/run/ifstate, however - some distributions tend to put it in other places - (debian, for example, uses /etc/network/run/ifstate). - This config option defines location of ifstate. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - bool "Use ip applet" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - Use the iproute "ip" command to implement "ifup" and "ifdown", rather - than the default of using the older 'ifconfig' and 'route' utilities. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN - bool "Use busybox ip applet" - default n - depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - select BUSYBOX_CONFIG_PLATFORM_LINUX - select BUSYBOX_CONFIG_IP - select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - select BUSYBOX_CONFIG_FEATURE_IP_LINK - select BUSYBOX_CONFIG_FEATURE_IP_ROUTE - help - Use the busybox iproute "ip" applet to implement "ifupdown". - - If left disabled, you must install the full-blown iproute2 - utility or the "ifup" and "ifdown" applets will not work. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN - bool "Use busybox ifconfig and route applets" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - select BUSYBOX_CONFIG_IFCONFIG - select BUSYBOX_CONFIG_ROUTE - help - Use the busybox iproute "ifconfig" and "route" applets to - implement the "ifup" and "ifdown" utilities. - - If left disabled, you must install the full-blown ifconfig - and route utilities, or the "ifup" and "ifdown" applets will not - work. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4 - bool "Support for IPv4" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - If you want ifup/ifdown to talk IPv4, leave this on. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6 - bool "Support for IPv6" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6 - help - If you need support for IPv6, turn this option on. - -### UNUSED -###config FEATURE_IFUPDOWN_IPX -### bool "Support for IPX" -### default y -### depends on IFUPDOWN -### help -### If this option is selected you can use busybox to work with IPX -### networks. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING - bool "Enable mapping support" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - This enables support for the "mapping" stanza, unless you have - a weird network setup you don't need it. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP - bool "Support for external dhcp clients" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - This enables support for the external dhcp clients. Clients are - tried in the following order: dhcpcd, dhclient, pump and udhcpc. - Otherwise, if udhcpc applet is enabled, it is used. - Otherwise, ifup/ifdown will have no support for DHCP. - -config BUSYBOX_CONFIG_INETD - bool "inetd" - default n - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - Internet superserver daemon - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO - bool "Support echo service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Echo received data internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD - bool "Support discard service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Internet /dev/null internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME - bool "Support time service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Return 32 bit time since 1900 internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME - bool "Support daytime service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Return human-readable time internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN - bool "Support chargen service" - default n - depends on BUSYBOX_CONFIG_INETD - help - Familiar character generator internal inetd service - -config BUSYBOX_CONFIG_FEATURE_INETD_RPC - bool "Support RPC services" - default n - depends on BUSYBOX_CONFIG_INETD - select BUSYBOX_CONFIG_FEATURE_HAVE_RPC - help - Support Sun-RPC based services - -config BUSYBOX_CONFIG_IP - bool "ip" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The "ip" applet is a TCP/IP interface configuration and routing - utility. You generally don't need "ip" to use busybox with - TCP/IP. - -config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - bool "ip address" - default n - depends on BUSYBOX_CONFIG_IP - help - Address manipulation support for the "ip" applet. - -config BUSYBOX_CONFIG_FEATURE_IP_LINK - bool "ip link" - default n - depends on BUSYBOX_CONFIG_IP - help - Configure network devices with "ip". - -config BUSYBOX_CONFIG_FEATURE_IP_ROUTE - bool "ip route" - default n - depends on BUSYBOX_CONFIG_IP - help - Add support for routing table management to "ip". - -config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL - bool "ip tunnel" - default n - depends on BUSYBOX_CONFIG_IP - help - Add support for tunneling commands to "ip". - -config BUSYBOX_CONFIG_FEATURE_IP_RULE - bool "ip rule" - default n - depends on BUSYBOX_CONFIG_IP - help - Add support for rule commands to "ip". - -config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS - bool "Support short forms of ip commands" - default n - depends on BUSYBOX_CONFIG_IP - help - Also support short-form of ip commands: - ip addr -> ipaddr - ip link -> iplink - ip route -> iproute - ip tunnel -> iptunnel - ip rule -> iprule - - Say N unless you desparately need the short form of the ip - object commands. - -config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS - bool "Support displaying rarely used link types" - default n - depends on BUSYBOX_CONFIG_IP - help - If you are not going to use links of type "frad", "econet", - "bif" etc, you probably don't need to enable this. - Ethernet, wireless, infrared, ppp/slip, ip tunnelling - link types are supported without this option selected. - -config BUSYBOX_CONFIG_IPADDR - bool - default n - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - -config BUSYBOX_CONFIG_IPLINK - bool - default n - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK - -config BUSYBOX_CONFIG_IPROUTE - bool - default n - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE - -config BUSYBOX_CONFIG_IPTUNNEL - bool - default n - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL - -config BUSYBOX_CONFIG_IPRULE - bool - default n - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE - -config BUSYBOX_CONFIG_IPCALC - bool "ipcalc" - default n - help - ipcalc takes an IP address and netmask and calculates the - resulting broadcast, network, and host range. - -config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY - bool "Fancy IPCALC, more options, adds 1 kbyte" - default n - depends on BUSYBOX_CONFIG_IPCALC - help - Adds the options hostname, prefix and silent to the output of - "ipcalc". - -config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS - bool "Enable long options" - default n - depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the ipcalc applet. - -config BUSYBOX_CONFIG_NETMSG - bool "netmsg" - default y - help - simple program for sending udp broadcast messages - -config BUSYBOX_CONFIG_NETSTAT - bool "netstat" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - netstat prints information about the Linux networking subsystem. - -config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE - bool "Enable wide netstat output" - default y - depends on BUSYBOX_CONFIG_NETSTAT - help - Add support for wide columns. Useful when displaying IPv6 addresses - (-W option). - -config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG - bool "Enable PID/Program name output" - default y - depends on BUSYBOX_CONFIG_NETSTAT - help - Add support for -p flag to print out PID and program name. - +700 bytes of code. - -config BUSYBOX_CONFIG_NSLOOKUP - bool "nslookup" - default y - help - nslookup is a tool to query Internet name servers. - -config BUSYBOX_CONFIG_NTPD - bool "ntpd" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - The NTP client/server daemon. - -config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER - bool "Make ntpd usable as a NTP server" - default y - depends on BUSYBOX_CONFIG_NTPD - help - Make ntpd usable as a NTP server. If you disable this option - ntpd will be usable only as a NTP client. - -config BUSYBOX_CONFIG_PSCAN - bool "pscan" - default n - help - Simple network port scanner. - -config BUSYBOX_CONFIG_ROUTE - bool "route" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Route displays or manipulates the kernel's IP routing tables. - -config BUSYBOX_CONFIG_SLATTACH - bool "slattach" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - slattach is a small utility to attach network interfaces to serial - lines. - -#config TC -# bool "tc" -# default y -# help -# show / manipulate traffic control settings -# -#config FEATURE_TC_INGRESS -# def_bool n -# depends on TC - -config BUSYBOX_CONFIG_TCPSVD - bool "tcpsvd" - default n - help - tcpsvd listens on a TCP port and runs a program for each new - connection. - -config BUSYBOX_CONFIG_TELNET - bool "telnet" - default y - help - Telnet is an interface to the TELNET protocol, but is also commonly - used to test other simple protocols. - -config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE - bool "Pass TERM type to remote host" - default y - depends on BUSYBOX_CONFIG_TELNET - help - Setting this option will forward the TERM environment variable to the - remote host you are connecting to. This is useful to make sure that - things like ANSI colors and other control sequences behave. - -config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN - bool "Pass USER type to remote host" - default n - depends on BUSYBOX_CONFIG_TELNET - help - Setting this option will forward the USER environment variable to the - remote host you are connecting to. This is useful when you need to - log into a machine without telling the username (autologin). This - option enables `-a' and `-l USER' arguments. - -config BUSYBOX_CONFIG_TELNETD - bool "telnetd" - default y - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - A daemon for the TELNET protocol, allowing you to log onto the host - running the daemon. Please keep in mind that the TELNET protocol - sends passwords in plain text. If you can't afford the space for an - SSH daemon and you trust your network, you may say 'y' here. As a - more secure alternative, you should seriously consider installing the - very small Dropbear SSH daemon instead: - http://matt.ucc.asn.au/dropbear/dropbear.html - - Note that for busybox telnetd to work you need several things: - First of all, your kernel needs: - UNIX98_PTYS=y - DEVPTS_FS=y - - Next, you need a /dev/pts directory on your root filesystem: - - $ ls -ld /dev/pts - drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/ - - Next you need the pseudo terminal master multiplexer /dev/ptmx: - - $ ls -la /dev/ptmx - crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx - - Any /dev/ttyp[0-9]* files you may have can be removed. - Next, you need to mount the devpts filesystem on /dev/pts using: - - mount -t devpts devpts /dev/pts - - You need to be sure that busybox has LOGIN and - FEATURE_SUID enabled. And finally, you should make - certain that Busybox has been installed setuid root: - - chown root.root /bin/busybox - chmod 4755 /bin/busybox - - with all that done, telnetd _should_ work.... - - -config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE - bool "Support standalone telnetd (not inetd only)" - default y - depends on BUSYBOX_CONFIG_TELNETD - help - Selecting this will make telnetd able to run standalone. - -config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT - bool "Support -w SEC option (inetd wait mode)" - default n - depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE - help - This option allows you to run telnetd in "inet wait" mode. - Example inetd.conf line (note "wait", not usual "nowait"): - - telnet stream tcp wait root /bin/telnetd telnetd -w10 - - In this example, inetd passes _listening_ socket_ as fd 0 - to telnetd when connection appears. - telnetd will wait for connections until all existing - connections are closed, and no new connections - appear during 10 seconds. Then it exits, and inetd continues - to listen for new connections. - - This option is rarely used. "tcp nowait" is much more usual - way of running tcp services, including telnetd. - You most probably want to say N here. - -config BUSYBOX_CONFIG_TFTP - bool "tftp" - default n - help - This enables the Trivial File Transfer Protocol client program. TFTP - is usually used for simple, small transfers such as a root image - for a network-enabled bootloader. - -config BUSYBOX_CONFIG_TFTPD - bool "tftpd" - default n - help - This enables the Trivial File Transfer Protocol server program. - It expects that stdin is a datagram socket and a packet - is already pending on it. It will exit after one transfer. - In other words: it should be run from inetd in nowait mode, - or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" - -comment "Common options for tftp/tftpd" - depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD - -config BUSYBOX_CONFIG_FEATURE_TFTP_GET - bool "Enable 'tftp get' and/or tftpd upload code" - default n - depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD - help - Add support for the GET command within the TFTP client. This allows - a client to retrieve a file from a TFTP server. - Also enable upload support in tftpd, if tftpd is selected. - - Note: this option does _not_ make tftpd capable of download - (the usual operation people need from it)! - -config BUSYBOX_CONFIG_FEATURE_TFTP_PUT - bool "Enable 'tftp put' and/or tftpd download code" - default n - depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD - help - Add support for the PUT command within the TFTP client. This allows - a client to transfer a file to a TFTP server. - Also enable download support in tftpd, if tftpd is selected. - -config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE - bool "Enable 'blksize' and 'tsize' protocol options" - default n - depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD - help - Allow tftp to specify block size, and tftpd to understand - "blksize" and "tsize" options. - -config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR - bool "Enable tftp progress meter" - default n - depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE - help - Show progress bar. - -config BUSYBOX_CONFIG_TFTP_DEBUG - bool "Enable debug" - default n - depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD - help - Make tftp[d] print debugging messages on stderr. - This is useful if you are diagnosing a bug in tftp[d]. - -config BUSYBOX_CONFIG_TRACEROUTE - bool "traceroute" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Utility to trace the route of IP packets. - -config BUSYBOX_CONFIG_TRACEROUTE6 - bool "traceroute6" - default n - depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE - help - Utility to trace the route of IPv6 packets. - -config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE - bool "Enable verbose output" - default y - depends on BUSYBOX_CONFIG_TRACEROUTE - help - Add some verbosity to traceroute. This includes among other things - hostnames and ICMP response types. - -config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE - bool "Enable loose source route" - default n - depends on BUSYBOX_CONFIG_TRACEROUTE - help - Add option to specify a loose source route gateway - (8 maximum). - -config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP - bool "Use ICMP instead of UDP" - default n - depends on BUSYBOX_CONFIG_TRACEROUTE - help - Add option -I to use ICMP ECHO instead of UDP datagrams. - -config BUSYBOX_CONFIG_TUNCTL - bool "tunctl" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - tunctl creates or deletes tun devices. - -config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG - bool "Support owner:group assignment" - default n - depends on BUSYBOX_CONFIG_TUNCTL - help - Allow to specify owner and group of newly created interface. - 340 bytes of pure bloat. Say no here. - -source package/utils/busybox/config/networking/udhcp/Config.in - -config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS - string "ifup udhcpc command line options" - default "-R -n" - depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC - help - Command line options to pass to udhcpc from ifup. - Intended to alter options not available in /etc/network/interfaces. - (IE: --syslog --background etc...) - -config BUSYBOX_CONFIG_UDPSVD - bool "udpsvd" - default n - help - udpsvd listens on an UDP port and runs a program for each new - connection. - -config BUSYBOX_CONFIG_VCONFIG - bool "vconfig" - default y - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - Creates, removes, and configures VLAN interfaces - -config BUSYBOX_CONFIG_WGET - bool "wget" - default y - help - wget is a utility for non-interactive download of files from HTTP, - HTTPS, and FTP servers. - -config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR - bool "Enable a nifty process meter (+2k)" - default y - depends on BUSYBOX_CONFIG_WGET - help - Enable the transfer progress bar for wget transfers. - -config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION - bool "Enable HTTP authentication" - default y - depends on BUSYBOX_CONFIG_WGET - help - Support authenticated HTTP transfers. - -config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS - bool "Enable long options" - default y - depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the wget applet. - -config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT - bool "Enable read timeout option -T SEC" - default n - depends on BUSYBOX_CONFIG_WGET - help - Supports network read timeout for wget, so that wget will give - up and timeout when reading network data, through the -T command - line option. Currently only network data read timeout is - supported (i.e., timeout is not applied to the DNS nor TCP - connection initialization). When FEATURE_WGET_LONG_OPTIONS is - also enabled, the --timeout option will work in addition to -T. - -config BUSYBOX_CONFIG_ZCIP - bool "zcip" - default n - select BUSYBOX_CONFIG_PLATFORM_LINUX - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. - It's a daemon that allocates and defends a dynamically assigned - address on the 169.254/16 network, requiring no system administrator. - - See http://www.zeroconf.org for further details, and "zcip.script" - in the busybox examples. - -endmenu -- cgit v1.2.3