From a2f8bbfe100bf59e3ccc50a059003350329ba248 Mon Sep 17 00:00:00 2001 From: Matteo Croce Date: Sat, 12 Jan 2008 13:27:26 +0000 Subject: update the acx driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10178 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/acx/Makefile | 6 +- package/acx/patches/001-no-reset.diff | 20 -- package/acx/patches/003-native_vlynq.patch | 557 ----------------------------- 3 files changed, 3 insertions(+), 580 deletions(-) delete mode 100644 package/acx/patches/001-no-reset.diff delete mode 100644 package/acx/patches/003-native_vlynq.patch (limited to 'package/acx') diff --git a/package/acx/Makefile b/package/acx/Makefile index ce173023c4..216df5f449 100644 --- a/package/acx/Makefile +++ b/package/acx/Makefile @@ -10,12 +10,12 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=acx -PKG_VERSION:=20071003 -PKG_RELEASE:=2 +PKG_VERSION:=20080112 +PKG_RELEASE:=1 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:=@SF/acx100 -PKG_MD5SUM:=09cbaa558e1850d4996e7083d8b7bb93 +PKG_MD5SUM:=b376b5359ef15da589ef17387a6b37d3 PKG_FW_NAME:=tiacx111c16 PKG_FW_URL:=http://teknoraver.campuslife.it/software/acx-mac80211/ diff --git a/package/acx/patches/001-no-reset.diff b/package/acx/patches/001-no-reset.diff deleted file mode 100644 index 1166d07c26..0000000000 --- a/package/acx/patches/001-no-reset.diff +++ /dev/null @@ -1,20 +0,0 @@ -Index: acx-20070101/pci.c -=================================================================== ---- acx-20070101.orig/pci.c 2007-06-04 13:22:42.489395912 +0200 -+++ acx-20070101/pci.c 2007-06-04 13:22:42.557385576 +0200 -@@ -925,10 +925,13 @@ - - acx_lock(adev, flags); - -- acxpci_l_reset_mac(adev); -- - ecpu_ctrl = read_reg16(adev, IO_ACX_ECPU_CTRL) & 1; - if (!ecpu_ctrl) { -+ acxpci_l_reset_mac(adev); -+ ecpu_ctrl = read_reg16(adev, IO_ACX_ECPU_CTRL) & 1; -+ } -+ -+ if (!ecpu_ctrl) { - msg = "eCPU is already running. "; - goto end_unlock; - } diff --git a/package/acx/patches/003-native_vlynq.patch b/package/acx/patches/003-native_vlynq.patch deleted file mode 100644 index cdbe335ca5..0000000000 --- a/package/acx/patches/003-native_vlynq.patch +++ /dev/null @@ -1,557 +0,0 @@ -Binary files acx-20071003/.pci.c.swp and acx-20071003.new/.pci.c.swp differ -diff -urN acx-20071003/acx_struct.h acx-20071003.new/acx_struct.h ---- acx-20071003/acx_struct.h 2007-10-03 17:42:18.000000000 +0200 -+++ acx-20071003.new/acx_struct.h 2008-01-04 02:06:43.000000000 +0100 -@@ -1440,7 +1440,13 @@ - - const u16 *io; /* points to ACX100 or ACX111 PCI I/O register address set */ - -+#ifdef CONFIG_PCI - struct pci_dev *pdev; -+#endif -+#ifdef CONFIG_VLYNQ -+ struct vlynq_device *vdev; -+#endif -+ struct device *bus_dev; - - unsigned long membase; - unsigned long membase2; -diff -urN acx-20071003/pci.c acx-20071003.new/pci.c ---- acx-20071003/pci.c 2008-01-04 02:05:00.000000000 +0100 -+++ acx-20071003.new/pci.c 2008-01-04 03:10:42.000000000 +0100 -@@ -59,12 +59,17 @@ - #include - #include - #include -+#ifdef CONFIG_VLYNQ -+#include -+#endif -+ - - #include "acx.h" - - - /*********************************************************************** - */ -+#ifdef CONFIG_PCI - #define PCI_TYPE (PCI_USES_MEM | PCI_ADDR0 | PCI_NO_ACPI_WAKE) - #define PCI_ACX100_REGION1 0x01 - #define PCI_ACX100_REGION1_SIZE 0x1000 /* Memory size - 4K bytes */ -@@ -102,7 +107,7 @@ - #define PCI_POWER_ERROR -1 - #endif - -- -+#endif - /*********************************************************************** - */ - static void acxpci_i_tx_timeout(struct net_device *ndev); -@@ -653,11 +658,11 @@ - snprintf(filename, sizeof(filename), "tiacx1%02dc%02X", - IS_ACX111(adev)*11, adev->radio_type); - -- fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size); -+ fw_image = acx_s_read_fw(adev->bus_dev, filename, &file_size); - if (!fw_image) { - adev->need_radio_fw = 1; - filename[sizeof("tiacx1NN")-1] = '\0'; -- fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size); -+ fw_image = acx_s_read_fw(adev->bus_dev, filename, &file_size); - if (!fw_image) { - FN_EXIT1(NOT_OK); - return NOT_OK; -@@ -716,7 +721,7 @@ - snprintf(filename, sizeof(filename), "tiacx1%02dr%02X", - IS_ACX111(adev)*11, - adev->radio_type); -- radio_image = acx_s_read_fw(&adev->pdev->dev, filename, &size); -+ radio_image = acx_s_read_fw(adev->bus_dev, filename, &size); - if (!radio_image) { - printk("acx: can't load radio module '%s'\n", filename); - goto fail; -@@ -933,7 +938,9 @@ - - ecpu_ctrl = read_reg16(adev, IO_ACX_ECPU_CTRL) & 1; - if (!ecpu_ctrl) { -+#ifdef CONFIG_PCI - acxpci_l_reset_mac(adev); -+#endif - ecpu_ctrl = read_reg16(adev, IO_ACX_ECPU_CTRL) & 1; - } - -@@ -1473,6 +1480,7 @@ - static void - dummy_netdev_init(struct net_device *ndev) {} - -+#ifdef CONFIG_PCI - static int __devinit - acxpci_e_probe(struct pci_dev *pdev, const struct pci_device_id *id) - { -@@ -1606,6 +1614,7 @@ - ** just _presume_ that we're under sem (instead of actually taking it): */ - /* acx_sem_lock(adev); */ - adev->pdev = pdev; -+ adev->bus_dev = &pdev->dev; - adev->ndev = ndev; - adev->dev_type = DEVTYPE_PCI; - adev->chip_type = chip_type; -@@ -1956,7 +1965,7 @@ - return OK; - } - #endif /* CONFIG_PM */ -- -+#endif /* CONFIG_PCI */ - - /*********************************************************************** - ** acxpci_s_up -@@ -2051,7 +2060,7 @@ - /* then wait until interrupts have finished executing on other CPUs */ - acx_lock(adev, flags); - disable_acx_irq(adev); -- synchronize_irq(adev->pdev->irq); -+ synchronize_irq(adev->irq); - acx_unlock(adev, flags); - - /* we really don't want to have an asynchronous tasklet disturb us -@@ -3573,9 +3582,8 @@ - { - void *ptr; - -- ptr = dma_alloc_coherent(adev->pdev ? &adev->pdev->dev : NULL, -- size, phy, GFP_KERNEL); -- -+ ptr = dma_alloc_coherent(adev->bus_dev, size, phy, GFP_KERNEL); -+ - if (ptr) { - log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n", - msg, (int)size, ptr, (unsigned long long)*phy); -@@ -4137,6 +4145,379 @@ - } - - -+#ifdef CONFIG_VLYNQ -+struct vlynq_reg_config { -+ u32 offset; -+ u32 value; -+}; -+ -+struct vlynq_known { -+ u32 chip_id; -+ char name[32]; -+ struct vlynq_mapping rx_mapping[4]; -+ int irq; -+ int irq_type; -+ int num_regs; -+ struct vlynq_reg_config regs[10]; -+}; -+ -+#define CHIP_TNETW1130 0x00000009 -+#define CHIP_TNETW1350 0x00000029 -+static struct vlynq_known known_devices[] = { -+ { -+ .chip_id = CHIP_TNETW1130, .name = "TI TNETW1130", -+ .rx_mapping = { -+ { .size = 0x22000, .offset = 0xf0000000 }, -+ { .size = 0x40000, .offset = 0xc0000000 }, -+ { .size = 0x0, .offset = 0x0 }, -+ { .size = 0x0, .offset = 0x0 }, -+ }, -+ .irq = 0, -+ .irq_type = IRQ_TYPE_EDGE_RISING, -+ .num_regs = 5, -+ .regs = { -+ { -+ .offset = 0x790, -+ .value = (0xd0000000 - PHYS_OFFSET) -+ }, -+ { -+ .offset = 0x794, -+ .value = (0xd0000000 - PHYS_OFFSET) -+ }, -+ { .offset = 0x740, .value = 0 }, -+ { .offset = 0x744, .value = 0x00010000 }, -+ { .offset = 0x764, .value = 0x00010000 }, -+ }, -+ }, -+ { -+ .chip_id = CHIP_TNETW1350, .name = "TI TNETW1350", -+ .rx_mapping = { -+ { .size = 0x100000, .offset = 0x00300000 }, -+ { .size = 0x80000, .offset = 0x00000000 }, -+ { .size = 0x0, .offset = 0x0 }, -+ { .size = 0x0, .offset = 0x0 }, -+ }, -+ .irq = 0, -+ .irq_type = IRQ_TYPE_EDGE_RISING, -+ .num_regs = 5, -+ .regs = { -+ { -+ .offset = 0x790, -+ .value = (0x60000000 - PHYS_OFFSET) -+ }, -+ { -+ .offset = 0x794, -+ .value = (0x60000000 - PHYS_OFFSET) -+ }, -+ { .offset = 0x740, .value = 0 }, -+ { .offset = 0x744, .value = 0x00010000 }, -+ { .offset = 0x764, .value = 0x00010000 }, -+ }, -+ }, -+}; -+ -+static struct vlynq_device_id acx_vlynq_id[] = { -+ { CHIP_TNETW1130, vlynq_div_auto, 0 }, -+ { CHIP_TNETW1350, vlynq_div_auto, 1 }, -+ { 0, 0, 0 }, -+}; -+ -+static __devinit int vlynq_probe(struct vlynq_device *vdev, -+ struct vlynq_device_id *id) -+{ -+ int result = -EIO, i; -+ u32 addr; -+ acx_device_t *adev = NULL; -+ struct net_device *ndev = NULL; -+ acx111_ie_configoption_t co; -+ struct vlynq_mapping mapping[4] = { { 0, }, }; -+ struct vlynq_known *match = NULL; -+ int err; -+ -+ FN_ENTER; -+ result = vlynq_enable_device(vdev); -+ if (result) -+ return result; -+ -+ match = &known_devices[id->driver_data]; -+ -+ if (!match) { -+ result = -ENODEV; -+ goto fail; -+ } -+ -+ mapping[0].offset = ARCH_PFN_OFFSET << PAGE_SHIFT; -+ mapping[0].size = 0x02000000; -+ vlynq_set_local_mapping(vdev, vdev->mem_start, mapping); -+ vlynq_set_remote_mapping(vdev, 0, match->rx_mapping); -+ -+ set_irq_type(vlynq_virq_to_irq(vdev, match->irq), match->irq_type); -+ -+ addr = (u32)ioremap(vdev->mem_start, 0x1000); -+ if (!addr) { -+ printk(KERN_ERR "%s: failed to remap io memory\n", -+ vdev->dev.bus_id); -+ result = -ENXIO; -+ goto fail; -+ } -+ -+ for (i = 0; i < match->num_regs; i++) -+ iowrite32(match->regs[i].value, -+ (u32 *)(addr + match->regs[i].offset)); -+ -+ iounmap((void *)addr); -+ -+ ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init); -+ /* (NB: memsets to 0 entire area) */ -+ if (!ndev) { -+ printk("acx: no memory for netdevice struct\n"); -+ goto fail_alloc_netdev; -+ } -+ ether_setup(ndev); -+ ndev->open = &acxpci_e_open; -+ ndev->stop = &acxpci_e_close; -+ ndev->hard_start_xmit = &acx_i_start_xmit; -+ ndev->get_stats = &acx_e_get_stats; -+#if IW_HANDLER_VERSION <= 5 -+ ndev->get_wireless_stats = &acx_e_get_wireless_stats; -+#endif -+ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; -+ ndev->set_multicast_list = &acxpci_i_set_multicast_list; -+ ndev->tx_timeout = &acxpci_i_tx_timeout; -+ ndev->change_mtu = &acx_e_change_mtu; -+ ndev->watchdog_timeo = 4 * HZ; -+ -+ adev = ndev2adev(ndev); -+ -+ memset(adev, 0, sizeof(*adev)); -+ /** Set up our private interface **/ -+ spin_lock_init(&adev->lock); /* initial state: unlocked */ -+ /* We do not start with downed sem: we want PARANOID_LOCKING to work */ -+ sema_init(&adev->sem, 1); -+ /* since nobody can see new netdev yet, we can as well -+ ** just _presume_ that we're under sem (instead of actually taking it): */ -+ /* acx_sem_lock(adev); */ -+ adev->ndev = ndev; -+ adev->vdev = vdev; -+ adev->bus_dev = &vdev->dev; -+ adev->dev_type = DEVTYPE_PCI; -+ -+/** Finished with private interface **/ -+ -+ vlynq_set_drvdata(vdev, ndev); -+ if (!request_mem_region(vdev->mem_start, vdev->mem_end - vdev->mem_start, "acx")) { -+ printk("acx: cannot reserve VLYNQ memory region\n"); -+ goto fail_request_mem_region; -+ } -+ adev->iobase = ioremap(vdev->mem_start, vdev->mem_end - vdev->mem_start); -+ if (!adev->iobase) { -+ printk("acx: ioremap() FAILED\n"); -+ goto fail_ioremap; -+ } -+ adev->iobase2 = adev->iobase + match->rx_mapping[0].size; -+ adev->chip_type = CHIPTYPE_ACX111; -+ adev->chip_name = match->name; -+ adev->io = IO_ACX111; -+ ndev->irq = vlynq_virq_to_irq(vdev, match->irq); -+ ndev->base_addr = adev->iobase; -+ -+ printk("acx: found %s-based wireless network card at %s, irq:%d, " -+ "phymem:0x%x, mem:0x%p\n", -+ match->name, vdev->dev.bus_id, ndev->irq, -+ vdev->mem_start, adev->iobase); -+ log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug); -+ -+ if (0 == ndev->irq) { -+ printk("acx: can't use IRQ 0\n"); -+ goto fail_irq; -+ } -+ -+ /* to find crashes due to weird driver access -+ * to unconfigured interface (ifup) */ -+ adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead; -+#ifdef NONESSENTIAL_FEATURES -+ acx_show_card_eeprom_id(adev); -+#endif /* NONESSENTIAL_FEATURES */ -+ -+#ifdef SET_MODULE_OWNER -+ SET_MODULE_OWNER(ndev); -+#endif -+ SET_NETDEV_DEV(ndev, adev->bus_dev); -+ -+ log(L_IRQ|L_INIT, "using IRQ %d\n", ndev->irq); -+ -+ -+ /* ok, pci setup is finished, now start initializing the card */ -+ -+ /* NB: read_reg() reads may return bogus data before reset_dev(), -+ * since the firmware which directly controls large parts of the I/O -+ * registers isn't initialized yet. -+ * acx100 seems to be more affected than acx111 */ -+ if (OK != acxpci_s_reset_dev(adev)) -+ goto fail_reset; -+ -+ if (OK != acx_s_init_mac(adev)) -+ goto fail_init_mac; -+ -+ acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS); -+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */ -+ if (OK != acxpci_read_eeprom_byte(adev, 0x05, &adev->eeprom_version)) -+ goto fail_read_eeprom_version; -+ -+ acx_s_parse_configoption(adev, &co); -+ acx_s_set_defaults(adev); -+ acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */ -+ acx_display_hardware_details(adev); -+ -+ /* Register the card, AFTER everything else has been set up, -+ * since otherwise an ioctl could step on our feet due to -+ * firmware operations happening in parallel or uninitialized data */ -+ -+ -+ acx_proc_register_entries(ndev); -+ -+ /* Now we have our device, so make sure the kernel doesn't try -+ * to send packets even though we're not associated to a network yet */ -+ acx_stop_queue(ndev, "on probe"); -+ acx_carrier_off(ndev, "on probe"); -+ -+ /* after register_netdev() userspace may start working with dev -+ * (in particular, on other CPUs), we only need to up the sem */ -+ /* acx_sem_unlock(adev); */ -+ -+ printk("acx " ACX_RELEASE ": net device %s, driver compiled " -+ "against wireless extensions %d and Linux %s\n", -+ ndev->name, WIRELESS_EXT, UTS_RELEASE); -+ -+ log(L_IRQ | L_INIT, "using IRQ %d\n", ndev->irq); -+ -+/** done with board specific setup **/ -+ err = register_netdev(ndev); -+ if (OK != err) { -+ printk("acx: register_netdev() FAILED: %d\n", err); -+ goto fail_register_netdev; -+ } -+ -+#if CMD_DISCOVERY -+ great_inquisitor(adev); -+#endif -+ -+ result = OK; -+ goto done; -+ -+ /* error paths: undo everything in reverse order... */ -+ -+ -+ acxpci_s_delete_dma_regions(adev); -+ -+ fail_init_mac: -+ fail_read_eeprom_version: -+ fail_reset: -+ free_netdev(ndev); -+ -+ fail_alloc_netdev: -+ fail_irq: -+ -+ iounmap(adev->iobase); -+ fail_ioremap: -+ -+ release_mem_region(vdev->mem_start, vdev->mem_end - vdev->mem_start); -+ fail_request_mem_region: -+ fail_register_netdev: -+ fail: -+ vlynq_disable_device(vdev); -+ done: -+ FN_EXIT1(result); -+ return result; -+} -+ -+static void vlynq_remove(struct vlynq_device *vdev) -+{ -+ struct net_device *ndev = vlynq_get_drvdata(vdev);; -+ acx_device_t *adev; -+ unsigned long flags; -+ FN_ENTER; -+ -+ if (!ndev) { -+ log(L_DEBUG, "%s: card is unused. Skipping any release code\n", -+ __func__); -+ goto end; -+ } -+ -+ acx_lock(adev, flags); -+ adev = ndev2adev(ndev); -+ acx_unlock(adev, flags); -+ -+ /* If device wasn't hot unplugged... */ -+ if (adev_present(adev)) { -+ -+ acx_sem_lock(adev); -+ -+ /* disable both Tx and Rx to shut radio down properly */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); -+ acx_lock(adev, flags); -+ /* disable power LED to save power :-) */ -+ log(L_INIT, "switching off power LED to save power\n"); -+ acxpci_l_power_led(adev, 0); -+ /* stop our eCPU */ -+ acx_unlock(adev, flags); -+ -+ acx_sem_unlock(adev); -+ } -+ -+ /* unregister the device to not let the kernel -+ * (e.g. ioctls) access a half-deconfigured device -+ * NB: this will cause acxpci_e_close() to be called, -+ * thus we shouldn't call it under sem! */ -+ log(L_INIT, "removing device %s\n", ndev->name); -+ unregister_netdev(ndev); -+ -+ /* unregister_netdev ensures that no references to us left. -+ * For paranoid reasons we continue to follow the rules */ -+ acx_sem_lock(adev); -+ -+ -+ if (adev->dev_state_mask & ACX_STATE_IFACE_UP) { -+ acxpci_s_down(ndev); -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ } -+ -+ acx_proc_unregister_entries(ndev); -+ -+ /* finally, clean up PCI bus state */ -+ acxpci_s_delete_dma_regions(adev); -+ if (adev->iobase) -+ iounmap(adev->iobase); -+ if (adev->iobase2) -+ iounmap(adev->iobase2); -+ release_mem_region(vdev->mem_start, vdev->mem_end - vdev->mem_start); -+ -+ /* remove dev registration */ -+ -+ acx_sem_unlock(adev); -+ vlynq_disable_device(vdev); -+ -+ /* Free netdev (quite late, -+ * since otherwise we might get caught off-guard -+ * by a netdev timeout handler execution -+ * expecting to see a working dev...) */ -+ free_netdev(ndev); -+ -+ end: -+ FN_EXIT0; -+} -+ -+static struct vlynq_driver vlynq_acx = { -+ .name = "acx_vlynq", -+ .id_table = acx_vlynq_id, -+ .probe = vlynq_probe, -+ .remove = __devexit_p(vlynq_remove), -+}; -+#endif -+ -+ -+#ifdef CONFIG_PCI - /*********************************************************************** - ** Data for init_module/cleanup_module - */ -@@ -4192,7 +4573,7 @@ - .resume = acxpci_e_resume - #endif /* CONFIG_PM */ - }; -- -+#endif /* CONFIG_PCI */ - - /*********************************************************************** - ** acxpci_e_init_module -@@ -4202,7 +4583,7 @@ - int __init - acxpci_e_init_module(void) - { -- int res; -+ int res = 0; - - FN_ENTER; - -@@ -4222,11 +4603,15 @@ - #endif - log(L_INIT, - "acx: " ENDIANNESS_STRING -- "acx: PCI module " ACX_RELEASE " initialized, " -+ "acx: PCI/VLYNQ module " ACX_RELEASE " initialized, " - "waiting for cards to probe...\n" - ); -- -+#ifdef CONFIG_PCI - res = pci_register_driver(&acxpci_drv_id); -+#endif -+#ifdef CONFIG_VLYNQ -+ res = vlynq_register_driver(&vlynq_acx); -+#endif - FN_EXIT1(res); - return res; - } -@@ -4242,8 +4627,13 @@ - acxpci_e_cleanup_module(void) - { - FN_ENTER; -+#ifdef CONFIG_VLYNQ -+ vlynq_unregister_driver(&vlynq_acx); -+#endif - -+#ifdef CONFIG_PCI - pci_unregister_driver(&acxpci_drv_id); -+#endif - - FN_EXIT0; - } -- cgit v1.2.3